Hi XDA,
I've got a question. I entered download mode on my gs2 and instead of factory mode at the top, I saw Odin mode. I have no idea what this is, and since I'm looking to reset my binary counter I don't know if this will affect it.
Thanks.
Odin mode/factory mode/download mode. Same difference.
Related
i was trying to revert to stock jfd from nero beta 3 using odin. however the odin failed.
now, the only mode i can enter is download mode.
i can't reach the recovery mode, and the only other screen beside the yellow triangle in download mode, is some picture of a phone connected to a cpu.
can anyone please help? i'm completely lost on what to do to fix this.
Keep trying with odin. Are you using the latest version of odin?
Load Eugenes froyo that doesnt brick
Try rebooting your computer and using a different USB port
Also, start odin as soon as you load the files on.
ke.laguardia said:
i was trying to revert to stock jfd from nero beta 3 using odin. however the odin failed.
now, the only mode i can enter is download mode.
i can't reach the recovery mode, and the only other screen beside the yellow triangle in download mode, is some picture of a phone connected to a cpu.
can anyone please help? i'm completely lost on what to do to fix this.
Click to expand...
Click to collapse
I got you on this....
odin back to stock, ha.
that screen is common when odin fails... dont worrie about it. just keep putting it in to download mode and it will work sooner or later.
If it does not work check out this, it might help.
http://forum.xda-developers.com/showthread.php?t=799105
Okay, so I had installed the latest MIUI rom, after rooting my phone, but then got stuck in a boot loop so I decided to flash back to stock rom, during this Odin crashed and now my phone is stuck with this icon which I'm sure you guys know about. The problem I have is I had turned off debugging mode on my phone earlier on after I rooted, so now I can't exactly flash it back to stock rom or anything with Odin, the Recovery mode doesn't work anymore, everything just brings up the phone..!..PC symbol. I can however go into download mode. Just not sure what I can do with it with debugging turned off.
What do I do?
theLazyLion said:
Okay, so I had installed the latest MIUI rom, after rooting my phone, but then got stuck in a boot loop so I decided to flash back to stock rom, during this Odin crashed and now my phone is stuck with this icon which I'm sure you guys know about. The problem I have is I had turned off debugging mode on my phone earlier on after I rooted, so now I can't exactly flash it back to stock rom or anything with Odin, the Recovery mode doesn't work anymore, everything just brings up the phone..!..PC symbol. I can however go into download mode. Just not sure what I can do with it with debugging turned off.
What do I do?
Click to expand...
Click to collapse
When you connect the phone to your pc, does odin show that it is connected? i.e. a block turns yellow?
It detects the phone properly, it gives an error though when it reaches the writing stage, and hits a Red Failed icon in the first bar.
I am no expert but wouldn’t a USB jig Help get into download mode?
As I mentioned I can already get into download mode, but I don't know what to do from there, seeing as I had debugging mode off before my phone started this whole mess.
Oh sorry, I misunderstood.
I cannot help you mate, because I am relatively new to all of this, but I am sure that someone will be able to help you out. From what I have read as long as the phone shows signs of life (in your case the "phone ! pc" symbol) it can be recovered.
Keep your hopes up, all the best to you!
The problem I have is I had turned off debugging mode on my phone earlier on after I rooted, so now I can't exactly flash it back to stock rom or anything with Odin,
Nothing to do with flashing .
Your choices are
Remove battery replace boot phone to download mode install stock rom.
Or enter recovery mode and factory reset .
USB jig is supposedly not working for download mode on SGS2 if three button will not enter download mode .
Or remove custom rom and root and zero rom counter return phone under warranty .
Or return under warranty and take your chance .
jje
Hi, I have a problem, I was flashing my s2 by Cwm recovery, did all the wipe and factory data, and then went to install the rom, but did not recognize the sdcard, and there was where save the rom, then use odin, to install the rom, since the phone would not start, install 2.3.6 with all files ("pit", "PDA", "Phone" and "csc" and the three boxes checked ("re-partition", "RBOOT self "and" f. reset time ") the process lasted almost five minutes and already finished, waiting two minutes thought this was over, and spent more than 30 minutes and nothing, disconnect and remove the battery, and now only comes in "Download Mode" and when I turn in "recovery" I get a celulara, a yellow triangle and pc "says" encountered an UPGRADE FIRMWARE ISSUE. PLEASE SELECT RECOVERY mODE iN KIES & TRY AGAIN. "
I can only enter download mode, and I have so:
ODIN MODE
PRODUCT NAME: i9100
CUSTOM BINARY DOWNLOAD: YES (1 COUNTS)
CURRENT BINARY: CUSTOM
but since the pc does not recognize it, before the sound reproduced pc to connect the phone and no longer does, hence not able to do anything eh, I do.?
leei in a forum that the cell is still alive and is a single failure, but can not find solution working.
this user also also had the same problem, but the mode excepciopn reconicia download the pc
http://forum.xda-developers.com/showthread.php?t=2374594
sorry for my bad English, I'm Latin American, and had not
try to get to cwm and do a wipe/factory reset
or get a usb jig
p.s. are you sure you placed the files on the right places while flashing via ODIN ?
S2 brick
wishmas7er said:
try to get to cwm and do a wipe/factory reset
or get a usb jig
p.s. are you sure you placed the files on the right places while flashing via ODIN ?
Click to expand...
Click to collapse
Can not enter Cwm, when I try to get out, the celulara, the yellow triangle and pc, if put the files fine. I can only enter download mode, but the phone does not connect to pc, eh tried on other computers and also, that I can do?
Did you try to flash a custom rom with odin?
Look for "forced download"
Sent from the little guy
Hello,
I have Samsung Galaxy S4 Mini (9192) rooted with Kingo. I tried to entered Recovery Mode (Power+VolumeUp+Home), a black screen with Kingo watermark appeared and then phone stuck at a brown screen. Now, If I am trying to enter download mode, Odin doesn't recognise my device (however, usb other functionalities are quite okay, can copy paste, view data on phone). I unrooted the phone but still can not go into recovery mode, neither doest odin recognise phone. I also tried reseting phone from settings, it didn't work. How can I get back stock recovery?
Thanks in advance. Apologies for poor terminology.
Hey guys,
I recently bought a Galaxy S3 i9300 from my friend for $10. She was going to throw it away because it was stuck at the boot screen. So I figured I could make use of it by re-flashing a rom via odin.
I know for a fact that the phone is rooted and has CWM for recovery, but it doesn't boot into the recovery either.
I tried flashing TWRP to it via Odin, but there's absolutely no download bar in the download mode appearing. Odin either says 'Fail' or gets stuck trying to install it.
I also downloaded one of the official firmwares from Samsung's website but that didn't work either; again, no download bar appears when I start the flashing, but it IS in download mode.
The letters at the top say;
Odin Mode
Product Name: GT-I9300
Custom Binary Download: Yes (5 counts)
Current Binary: Custom
System Status: Custom
Any ideas what it could be? This isn't hard bricked, is it?
Any help is appreciated
Thanks!
Edit: It won't turn on at all any more, NOW it is hard bricked haha.
Maybe a sudden death issue. Emmc chip...
thewalekk said:
Maybe a sudden death issue. Emmc chip...
Click to expand...
Click to collapse
I guess so. Ordered the Samsung Jig. See how it goes