Using the DNA in the UK help / advice needed. - HTC Droid DNA

I have one of these coming and I am using the EE 4G network in the UK, now I doubt I will get 4G to work which isn't a major problem but will this phone work in 3G or HS+.
I have been searching around and keep getting contrasting information, some sites says I will only get 2G and others say I will get 3G etc, is there anyone out there with a bit more knowledge over networks that can help me please.
I have looked on these forums and found one post and have replied in this and sent PM's but do need this info rather fast.

I can't guarantee anything, but both the DNA and EE support 2100MHz, so you should be able to get HSPA+ without any problems. The phone was designed to work on most networks in the world, so there shouldn't be any issues.

CastleBravo said:
I can't guarantee anything, but both the DNA and EE support 2100MHz, so you should be able to get HSPA+ without any problems. The phone was designed to work on most networks in the world, so there shouldn't be any issues.
Click to expand...
Click to collapse
Thanks for the reply I will be happy if it works with just HSPA+ as the 4G isn't that good where I live anyway.

Related

[Discussion]T-Mobile Unlocked HOX+ Users

Hey yall I just wanted to start a discussion thread for T-Mobile like me who are braving T-Mobile's refarmed network and using the HTC One X+ (International or unlocked AT&T variant). Maybe we can get a few tips and tricks together to make our user experience a bit better.
For example, such radios yall are using, any build.prop edits that might help data speeds or GPS locking speed (if you are using the international version like I am).
Ill update the OP with the list of suggestions, maybe an FAQ.
I've been using the Phone Info app to turn off the LTE radio, although I'm not entirely sure that is does. I use the GSM auto mode which is the default on 3G non LTE phones. The default on the One X+ is GSM/WCDMA/LTE
Is anyone experiencing weak or wavering 3G signal (over PCS) as discussed toward the end of this thread (scroll down about halfway on page three)?
http://forums.tmonews.com/index.php?topic=18318.40
The very knowledgeable posters there say that T-Mobile is using less power on PCS (WCDMA), as compared to AWS, right now. And probably won't turn it up until they start shifting AWS to LTE.
cb474 said:
Is anyone experiencing weak or wavering 3G signal (over PCS) as discussed toward the end of this thread (scroll down about halfway on page three)?
http://forums.tmonews.com/index.php?topic=18318.40
The very knowledgeable posters there say that T-Mobile is using less power on PCS (WCDMA), as compared to AWS, right now. And probably won't turn it up until they start shifting AWS to LTE.
Click to expand...
Click to collapse
Definitely especially indoors. I get full bars of PCS where available, but indoors I'm switching between 3G/"4G" and Edge.
rashad1 said:
Definitely especially indoors. I get full bars of PCS where available, but indoors I'm switching between 3G/"4G" and Edge.
Click to expand...
Click to collapse
Do you have a phone with AWS 3G to compare in the same location and see if it has better 3G reception?
cb474 said:
Do you have a phone with AWS 3G to compare in the same location and see if it has better 3G reception?
Click to expand...
Click to collapse
Yep, my Nexus 4 gets constant HSPA+ where I get spotty PCS
I have a question for you guys that are using the HOX+ on T-mobile.
What type of sim card are you using?
I know that on the original HTC One X, you had to use a non-gba sim card that said 50.01 on the front to make it work, and that if you used the one that said 50.05 you wouldn't get data even if you change the APN settings.
I just bought this phone a few minutes ago on Amazon and I know Houston is a 1900MHZ pcs market so that's not an issue, i just want to make sure I don't run into any issues with the sim card I have as it is fairly new.
jd317 said:
I have a question for you guys that are using the HOX+ on T-mobile.
What type of sim card are you using?
I know that on the original HTC One X, you had to use a non-gba sim card that said 50.01 on the front to make it work, and that if you used the one that said 50.05 you wouldn't get data even if you change the APN settings.
I just bought this phone a few minutes ago on Amazon and I know Houston is a 1900MHZ pcs market so that's not an issue, i just want to make sure I don't run into any issues with the sim card I have as it is fairly new.
Click to expand...
Click to collapse
Well I cut my sim from a regular SIM card so there aren't really numbers on it. I think you'll be safer with a newer one than an older one so you're fine.
Also located in Houston and getting pretty good 3G
I tried to sign up over at tmonews forums and registration for new users is closed. Anybody have any insight as to when that will reopen?
I believe one of the reasons TMO has to go with lower power at first is to measure the impact of their new 1900mhz spectrum usage in the existing market in question. Since other carriers are using the same spectrum they need to make sure they do not cause interference. The best way to do that is short and long term RF studies. Start off with a refarmed freq at lower power then over time bump up the power and make sure it doesnt cause any new interference. If so then your able to go to a higher power. Im sure the FCC has time constraints for this but add into it the amount of towers im sure the carrier would rather accomplish more with each visit. So if an upgrade or tweek is needed then they can also adjust the power.
Forgot to add i recently acquired the ATT version of the HTC ONE X+ 64GB and it does ok in the Dallas area. Had it switch a few times to G and E but for the most part i stays on 4G. HSPA+21.6 DL speeds go between 2megs down and 9 megs down.
Prior to that i was using a Nexus 4 and TMO GS3. I seem to have better speeds with my GS3.
IAmSixNine said:
I tried to sign up over at tmonews forums and registration for new users is closed. Anybody have any insight as to when that will reopen?
Click to expand...
Click to collapse
The forums have been like that for a while (at least months). Don't know why. Perhaps you can email the person who writes the blog and ask about it.
I live in the Orlando area, I am on Straight Talk. I was using an at&t compatible SIM from straight talk and got up to 7mb down and 1.5mb up but these speeds were not consistent, a few days ago I switched to a t -mobile compatible SIM from straight talk and now I get consistent 12mb down and 3mb up. I was very surprised! I'm so glad I did this switch
I am using an at&t 1X+ which I unlocked.
Sent from my HTC One X+
unlock sim
All, nice threat. just got this phone and unlocked the bootloader today. how can i unlock the simcard to use on tmo? i know we have LTE here and I am dying to see what kind of speeds i can get on this phone. thanks all
Thread closed.
Off topic discussion threads are not allowed

[Q] proper APN settings for Tmobile? (using unlocked Verizon HTC One)

I switched carriers to cut costs and I live in central Seattle, so with the Tmobile Headquarters next door, I knew coverage wouldn't be an issue. I hear that Seattle is a "refarmed" area and that even non-tmobile phones can get "decent" speeds (obviously not the LTE, but some sort of 3G/4G)
Can someone knowledgeable on the subject tell me what I need to get my phone off of E and onto H?
EDIT: I think I may have got the right APN settings by changing from fast.tmobile to epc.tmobile. the speed seems faster, but it still shows E (which may just be a limitation of the handset not being able to distinguish the 1900 MHtz 2G and 3G. Or out could just be a placebo effect.
but now I found a different issue. I can't call/data simultaneously. if it's not one thing it's another. x_x
Any responses
TidusWulf said:
I switched carriers to cut costs and I live in central Seattle, so with the Tmobile Headquarters next door, I knew coverage wouldn't be an issue. I hear that Seattle is a "refarmed" area and that even non-tmobile phones can get "decent" speeds (obviously not the LTE, but some sort of 3G/4G)
Can someone knowledgeable on the subject tell me what I need to get my phone off of E and onto H?
EDIT: I think I may have got the right APN settings by changing from fast.tmobile to epc.tmobile. the speed seems faster, but it still shows E (which may just be a limitation of the handset not being able to distinguish the 1900 MHtz 2G and 3G. Or out could just be a placebo effect.
but now I found a different issue. I can't call/data simultaneously. if it's not one thing it's another. x_x
Click to expand...
Click to collapse
Any responses on this one? I dont know if there is a radio.zip to be flashed on Verizon HTC ONE to work at better speeds than E(dge) which is only like 200KBPS download
Any DEVs, Senior Members who have toyed around?
Thanks in advance!!!!
chap_man said:
Any responses on this one? I dont know if there is a radio.zip to be flashed on Verizon HTC ONE to work at better speeds than E(dge) which is only like 200KBPS download
Any DEVs, Senior Members who have toyed around?
Thanks in advance!!!!
Click to expand...
Click to collapse
Pretty much edge is all you can hope to get. the Verizon model does not transfer over to T Mobile really. T Mobile is GSM, Verizon is a CDMA world phone. Verizon simply does not support the bands that T Mobile uses for 3G with one exception, the only way you will get a 3G connection is if you live in an area where T Mobile has a refarmed its 1900 megahertz edge network.
Hello new to the HTC one here unlocked and rooted. I'm currently on the $30 plan with T-Mobile and applied the most current apn for LTE everything works except mms...if anyone know of a solution that'd be awesome I cannot get it to work.. This is the att One unlocked could that have any conflict?
Sent from my HTC One using xda app-developers app
Got it working had to flash custom ROM. I'm assuming the stock at&t had something to do with MMS failure
If using T-Mobile...
Sent from my HTC One using xda app-developers app

Redmi Note 2 in USA?

I have T-mobile and im close to buying this phone. My worry is how well will data work in my area? The specs are great for the price
I know i wont get LTE speeds.
Would I be able to get data inside buildings?
Anyone have experience with this phone on t-mobile? Or any other xiaomi/chinese phone
tlxxxsracer said:
I have T-mobile and im close to buying this phone. My worry is how well will data work in my area? The specs are great for the price
I know i wont get LTE speeds. Would I be able to get data inside buildings? Anyone have experience with this phone on t-mobile? Or any other xiaomi/chinese phone
Click to expand...
Click to collapse
Here are three links (sort of cheat sheets) with some information that will help:
http://androidforums.com/threads/how-to-tell-if-a-phone-will-work-on-t-mobile.706991/
http://www.prepaidphonenews.com/2014/09/what-phone-works-with-which-operator.html
http://www.droid-life.com/2015/02/05/us-wireless-carrier-bands-gsm-cdma-wcdma-lte-verizon-att-sprint-tmobile/
You should also check out http://www.willmyphonework.net/, and if you end up with the FDD + TDD LTE version, that helps reconfirm things will work because of the 1900 MHz coverage.
You asked specifically about getting data inside buildings. My understanding is that lower frequencies work better for indoor coverage because they can more easily pass through walls, but they do not have the best range. In turn, if you want better outdoor distance and range, then higher frequencies work better because they are less attenuated by the atmosphere. Somebody else more knowledgeable can comment on this. But in the long run, it will probably be about your local coverage, too. I.e. if you are generally close to cell towers, the indoor/outdoor factor might not make much of a difference. And if you can somehow manage wifi calling with T-Mobile, that might also minimize any potential issue.
I think wifi calling must be baked into the phone to use it, but I may be wrong about this.
Any US T-Mobile users that can confirm this either way?
I am waiting on a Prime model myself, and plan to use it with an AT&T mvno in the US. AT&T supposedly has 3G on both 850 and 1900 MHz so 3G should work no problem.
thanks for the response. Accoring to the willmyphonework site it will work on Tmobile with 3g.. So im guessing no HSPA or HSPA+ right? these bands/network/freq confuse me.
tlxxxsracer said:
thanks for the response. Accoring to the willmyphonework site it will work on Tmobile with 3g.. So im guessing no HSPA or HSPA+ right? these bands/network/freq confuse me.
Click to expand...
Click to collapse
This phone should work with T-Mobile 3G, and also what T-Mobile calls 4G, but which is actually HSPA+, and thus, by the book is on 3G. Take a look at the AndroidForums link I sent above. Supposing that information is true, it says the following:
3G
The technology for 3G is called UMTS. T-Mobile uses two frequencies for their UMTS network: 1900MHz and 1700/2100MHz. So if you check your phone's specifications and see that it has either 1900MHz or 1700/2100MHz listed as one of the UMTS frequencies, then it will support T-Mobile's 3G network.
4G - HSPA+
T-Mobile did a bit of marketing on this one. What T-Mobile calls 4G can more accurately be called HSPA+. This is not really a new technology, rather, it's an upgrade of the 3G technology UMTS. Therefore, if your phone supports the UMTS frequencies 1900MHz or 1700/2100MHz, then we just need to check to see if the phone supports HSPA (slower) or HSPA+ (faster). If it does, then it will be compatible with T-Mobile's 4G network.
Click to expand...
Click to collapse
The RN2 supports UMTS at 1900 MHz and HSPA+ so yes, you should be able to get HSPA+ service. HSPA+ is pretty speedy, and for my own use case, it is perfectly fine. Some people will want/need/demand LTE speeds (even though HSPA+ gets very close, and sometimes passes it...). But at least for my own use case, I don't plan to be downloading huge files, or streaming HD video when I am away from wifi coverage. So for me, data up to 3G/HSPA+ is fine. But you'll have to figure out if it is good enough for you.
verbage said:
This phone should work with T-Mobile 3G, and also what T-Mobile calls 4G, but which is actually HSPA+, and thus, by the book is on 3G. Take a look at the AndroidForums link I sent above. Supposing that information is true, it says the following:
The RN2 supports UMTS at 1900 MHz and HSPA+ so yes, you should be able to get HSPA+ service. HSPA+ is pretty speedy, and for my own use case, it is perfectly fine. Some people will want/need/demand LTE speeds (even though HSPA+ gets very close, and sometimes passes it...). But at least for my own use case, I don't plan to be downloading huge files, or streaming HD video when I am away from wifi coverage. So for me, data up to 3G/HSPA+ is fine. But you'll have to figure out if it is good enough for you.
Click to expand...
Click to collapse
This is good news thank you! I mostly stream music while driving or browse the web anyways..
Now to just sell my Samsung s6 to buy a RN2
tlxxxsracer said:
This is good news thank you! I mostly stream music while driving or browse the web anyways.. Now to just sell my Samsung s6 to buy a RN2
Click to expand...
Click to collapse
tlxxxsracer, I'm always nervous to suggest something I cannot back up with my own firsthand experience. According to the information I pointed out, it seems like the RN2 should be able to use T-Mobile 3G/HSPA+ service. But it would sure be nice to have an actual RN2 T-Mobile user out there confirm this. Are there any of you around?
Check out the Huawei ascend mate 7. It's a little more than the RN2, but is compatible with tmobile lte bands. I'm gonna purchase it here soon. Idk where u live, but I used tmobiles hspa, and got crappy service. Only like 5 down and .5 up. But switching to lte I'm getting like 45d and 8u. Huge difference lol.
HSPDA works on Tmobile
tlxxxsracer said:
I have T-mobile and im close to buying this phone. My worry is how well will data work in my area? The specs are great for the price
I know i wont get LTE speeds.
Would I be able to get data inside buildings?
Anyone have experience with this phone on t-mobile? Or any other xiaomi/chinese phone
Click to expand...
Click to collapse
I was waiting for my phone to reply on this topic. I had lots of doubts about this issue, and finally bought Redmi Note 2. In the NY/NJ area, i am able to get HSPDA+ similar to my Nexus 4 (previous phone).
jpkml said:
I was waiting for my phone to reply on this topic. I had lots of doubts about this issue, and finally bought Redmi Note 2. In the NY/NJ area, i am able to get HSPDA+ similar to my Nexus 4 (previous phone).
Click to expand...
Click to collapse
Thanks i also spoke with Tmobile store rep, and they said it will work and that i should get 4g (hspa+) and showed a map of exact coverage the the frequencies in my area.
Where did you buy yours from?
jpkml said:
I was waiting for my phone to reply on this topic. I had lots of doubts about this issue, and finally bought Redmi Note 2. In the NY/NJ area, i am able to get HSPDA+ similar to my Nexus 4 (previous phone).
Click to expand...
Click to collapse
Great, thanks for confirming this, jpkml!
tlxxxsracer said:
Thanks i also spoke with Tmobile store rep, and they said it will work and that i should get 4g (hspa+) and showed a map of exact coverage the the frequencies in my area.
Where did you buy yours from?
Click to expand...
Click to collapse
I got the Prime (32GB) version from merimobiles.com . The buying experience was good. If you plan on buying from them, signup for their emails, you get a $20 discount points. Create a new account and order via that account to get the status via their website. I forgot to do both these steps, and had to ping them everyday (5-6am EST ) to followup on my order. It will take a good 2-3 weeks to get the phone in your hands. I used Singapore post as my shipping option(extra $$), but they decided to send it via China Post epacket, which was pretty fast once EMS gets their hands on the package. It reached US within 3 days, but USPS/customs had it for a good 3 days after reaching our shore .
jpkml said:
I got the Prime (32GB) version from merimobiles.com . The buying experience was good. If you plan on buying from them, signup for their emails, you get a $20 discount points. Create a new account and order via that account to get the status via their website. I forgot to do both these steps, and had to ping them everyday (5-6am EST ) to followup on my order. It will take a good 2-3 weeks to get the phone in your hands. I used Singapore post as my shipping option(extra $$), but they decided to send it via China Post epacket, which was pretty fast once EMS gets their hands on the package. It reached US within 3 days, but USPS/customs had it for a good 3 days after reaching our shore .
Click to expand...
Click to collapse
Good info, thanks and just found out it has 1yr warranty as well with option for $10 to buy 24month warranty.
Was there any import taxwith the singapore post option you selected?
I'll probably add shipping insurance too, just to be safe.
Did you check out with paypal? is there any protection from them in regards to shipping?
No import tax. ePackets is a sort of China Post & USPS offering. You can actually track the package using both their tracking system. I didn't get any insurance. The phone itself came nicely packaged in a bubble wrap. I did use paypal, but didn't check their shipping protection.
I also have T-Mobile and recently received my Redmi Note 2 16GB version from gearbest.com. Tried out a few different ROMs, both MIUI and AOSP. On MIUI, the network symbol shows an "H+" whenever I'm using data. On AOSP, only "3G" shows up top even though I have "4G Preferred" selected in network settings. Hope that helps!
Friend bought me the Redmi Note 2 straight from China. I have AT&T. Took my SIM out of the IPhone 5S and stuck it in slot 2 SIM. You can't slide it in all the way in as the SIM is a little bit shorter than the slot, it only works if you don't slide it in all the way. I get the H+ for data too which I assume is 3G and my signal is fine. If anyone has an easy way to use the LTE please update!
haywires said:
Friend bought me the Redmi Note 2 straight from China. I have AT&T. Took my SIM out of the IPhone 5S and stuck it in slot 2 SIM. You can't slide it in all the way in as the SIM is a little bit shorter than the slot, it only works if you don't slide it in all the way. I get the H+ for data too which I assume is 3G and my signal is fine. If anyone has an easy way to use the LTE please update!
Click to expand...
Click to collapse
For the moment, this will not work on LTE using AT&T or T-Mobile as the RN2 does not have the correct band/frequency coverage. If somebody figures out how to hack the baseband and add the right coverage, and there is not an actual physical/hardware limitation, that could possibly open up LTE coverage in the future.
HSPA+ is quite fast, in fact, T-Mobile refers to it as "4G" (but not LTE). Some folks will want/demand LTE coverage, but depending on your use case, HSPA+ may be perfectly fine.
tlxxxsracer said:
Thanks i also spoke with Tmobile store rep, and they said it will work and that i should get 4g (hspa+) and showed a map of exact coverage the the frequencies in my area.
Where did you buy yours from?
Click to expand...
Click to collapse
haywires said:
Friend bought me the Redmi Note 2 straight from China. I have AT&T. Took my SIM out of the IPhone 5S and stuck it in slot 2 SIM. You can't slide it in all the way in as the SIM is a little bit shorter than the slot, it only works if you don't slide it in all the way. I get the H+ for data too which I assume is 3G and my signal is fine. If anyone has an easy way to use the LTE please update!
Click to expand...
Click to collapse
HSPA+ (H+) is similar to 3G, but is as fast as band B20 of LTE (the slowest LTE band)
~ Xiaomi Redmi Note 2 Prime ~
Satenru said:
I also have T-Mobile and recently received my Redmi Note 2 16GB version from gearbest.com. Tried out a few different ROMs, both MIUI and AOSP. On MIUI, the network symbol shows an "H+" whenever I'm using data. On AOSP, only "3G" shows up top even though I have "4G Preferred" selected in network settings. Hope that helps!
Click to expand...
Click to collapse
correct me if I'm wrong, but I think GearBest is one of those dealers who'd install custom ROM that gives a bunch of pop-ups on Xiaomi Redmi Note 2
felix168 said:
correct me if I'm wrong, but I think GearBest is one of those dealers who'd install custom ROM that gives a bunch of pop-ups on Xiaomi Redmi Note 2
Click to expand...
Click to collapse
I don't know if it was a custom ROM but it did came with a bunch of bloat ware because I barely had any free space left so I just flashed TWRP and installed a fresh ROM over it.
I can confirm that the phone works on T-mobile HSPA+. I used it while visiting the US recently with a T-mobile MVNO (GoSmart).
I can also confirm that Gearbest ships the phone in an almost unusable state due to constant popups. Flashing new ROM is necessary.

4G not showing

Hey,
I've had the phone for a couple of days and have flashed it with smiui rom. Its working really well but i have not seen the 4g icon at the top of the screen, all i see is 3g or H. I had read online before i brought this that it would work with O2 4g.
Has anyone else had this and know how to resolve it?
Thanks
Nick
nickt1988 said:
Hey,
I've had the phone for a couple of days and have flashed it with smiui rom. Its working really well but i have not seen the 4g icon at the top of the screen, all i see is 3g or H. I had read online before i brought this that it would work with O2 4g.
Has anyone else had this and know how to resolve it?
Thanks
Nick
Click to expand...
Click to collapse
I'm assuming you're in the UK? If so, sorry to break this to you, but O2 4g currently only works on Band 20 (800MHz) (see here for more), which the RN2 doesn't support, it only supports Bands 1, 3 and 7 (1800/2100/2600MHz). There has been some attempt to unlock addition LTE bands in this thread using NVRAM hacks, but no dice so far.
To be fair, Band 20 is not the best for 4g, and is mainly used for rural areas to fill signal holes (there is some interesting info over on the OnePlus forums here). It's often not much faster than 3G. I personally am with Three in the UK on a Redmi Note 2, and I get some 4G in Central London.
So tl;dr wherever you got your info about O2 4G support for he RN2, it was wrong. Perhaps they will expand if the merger with Three goes through, otherwise, you're stuck.
f*ck
thanks for letting me know

4 LTE in u.s.?

I believe this phone is capable of using LTE in the US. It has all the right frequencies so I would believe the hardware should be there. I've tried several different APN settings and called customer service to confirm my IMEI with AT&T customer service but I cannot get LTE speeds. Anyone else in the u.s. experiencing the same problems?
barely works in Europe, from the product page i bought it from on Aliexpress they said the 4g wouldn't work in the States .
here majority of the time it drops to 3g and when it does the internet doesn't work at all.
lost count how many times I've had to search again for my network just to refresh the signal.
the antenna in this phone was poorly placed. putting sim in slot 1/2 doesn't matter.
I've gone back to my nexus 5 with zero problems on 4g.
thats really disheartening. I knew there would be a catch to this phone somewhere. And it would appear that the phone does not support 4G LTE bands in the US. .
3.5G umtcs however it does, which is close to 4G speeds. But I do not know how many towers in the US run those frequencies, I will post my findings if I can get HSPA+ or above on a regular basis.
I have noticed my signal fluctuate a lot, Sad that the most basic feature is the most troublesome, this phone comes so close. I wonder if this is something development can resolve or if its just a poor radio.
It will but with network B bands. I think in July.
Check their blog
Really? A coming update in July? I will look on their blog
I live in the UK, but just holidayed in the US this summer...My 9000 wouldn't work for calls, although I read they're bringing out a US version soon. Used it for satnav in 3 states though with no problems.

Categories

Resources