Have looked around but cannot find a stock Cingular HTC Titan (Eternity ?) rom. Previous thread hosted by Football is defunct.
Can anyone please point me to Stock Singular HTC Titan rom?
I am trying to uninstall HSPL ( I am at the dreaded 2.5 SPL, ATT Titan 1) and need this stock rom to try to revert back to 1.0 SPL.
For my ATT HTC Titan I, I debranded, SPL, HSPL and it says HSPL is there on the Phone's SPL screen - but I cannot use any custom rom that uses Radio 17. Only radio 16 works.
Thanks
my SPL screen shot
My SPL screen shot is attached below
BTW, anyone see any issues with the SPL screen above?
I am unable to run any rom that needs radio 17.
lund123 said:
My SPL screen shot is attached below
Click to expand...
Click to collapse
Your HSPL is good.
When you flash rom that needs radio 17. you Flash radio 17 too?
lund123 said:
My SPL screen shot is attached below
Click to expand...
Click to collapse
There is nothing wrong with your phone; in fact there are many here who would give their life to own your phone. For many of the custom ROMs here you have to flash "radio 16" with radio 17. If you have not done this then your phone will be stuck at the HTC logo on startup. You have "gold" in your hands and you don't know it.
lund123 said:
Have looked around but cannot find a stock Cingular HTC Titan (Eternity ?) rom. Previous thread hosted by Football is defunct.
Can anyone please point me to Stock Singular HTC Titan rom?
I am trying to uninstall HSPL ( I am at the dreaded 2.5 SPL, ATT Titan 1) and need this stock rom to try to revert back to 1.0 SPL.
For my ATT HTC Titan I, I debranded, SPL, HSPL and it says HSPL is there on the Phone's SPL screen - but I cannot use any custom rom that uses Radio 17. Only radio 16 works.
Thanks
Click to expand...
Click to collapse
Please no, why?
You are one of the few with the ATT Titan's to have HSPL on there.
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
lund123 said:
BTW, anyone see any issues with the SPL screen above?
I am unable to run any rom that needs radio 17.
Click to expand...
Click to collapse
That is because you need to flash radio 17 after you flash the rom
lund123 said:
My SPL screen shot is attached below
Click to expand...
Click to collapse
locky you, have hspl 2.5, if you want change my divece for your divece....... what you said? :angel:
Guys, I have tried the roms listed here on this site that also have the associated radio files as well But everytime I install a custom ROM, with the radio 17, my phone stops at th e HTC logo and never moves from it.
Also, I cannot update the SPL 2.6 from HTC now - it always stays at SPL 2.5
My only need is to unlock my phone so that I do not have to keep enterting the unlock code everytime the phone restarts. I have bought the unlock code from ebay and it does work, but have to keep entering it after every boot cycle.
I found the cingular Eternity 1.0 ROM, installed it - but the SPL continues to remain @ SPL 2.5 with the HSPL info as is on the SPL screen.
lund123 said:
Guys, I have tried the roms listed here on this site that also have the associated radio files as well But everytime I install a custom ROM, with the radio 17, my phone stops at th e HTC logo and never moves from it.
Also, I cannot update the SPL 2.6 from HTC now - it always stays at SPL 2.5
My only need is to unlock my phone so that I do not have to keep enterting the unlock code everytime the phone restarts. I have bought the unlock code from ebay and it does work, but have to keep entering it after every boot cycle.
I found the cingular Eternity 1.0 ROM, installed it - but the SPL continues to remain @ SPL 2.5 with the HSPL info as is on the SPL screen.
Click to expand...
Click to collapse
"Lund123" I need you to listen to me for a moment...if your device is stuck at the HTC logo on startup, your radio is incompatible with the ROM on the device. If you have already flashed the custom ROM and it requires you flash the radio it will be with the entire package you downloaded. I use Eburon 2.1; the radio and ROM are separate and both must be flashed from bootloader mode. To use Eburon you must flash the radio that comes with it. Your device is HSPL; it needs no further tinkering with. The custom ROMs can be flashed at will. One warning, a return to official stock ROMs will likely re-lock your phone. The goal of these threads are to achieve what you apparently don't realize; you are HSPL. It is not automatic for many of us to achieve this; HSPL opens your device in a way that can only be described a dream. You're lucky! Flash the radio separately from the bootloader; it's no different than flashing the ROM. In regards to having to re-enter a code; it appears your device may not be subsidy (carrier) unlocked or there is a security lock put on the device which it will ask before it launches the OS. That may require you running what a few of us in the old days did with our HD2s and Rhodiums...perform a task 29, but you may need a deeper "wipe" something akin to a low-level format on a PC.
"berrywr": I get that HSPL is already on the phone, and I am grateful for that. But I believe, I have loaded both the custom rom + radio that comes with it with no positive results.
I have tried the Dynamics ROM (as an example) and the Radio that comes with tit. First I flased the ROM uising the bootloader method. Then I repeated the same for the Radio. Same results, stuck on HTC logo. I have used the RUU program that it comes with to load the roms. I even have tried using the GOLDCARD for these roms, but same results. And Yes, I get it that I need to install the rom first and then the radio that comes with the package. Interestingly, my Radio on the SPL screen never changes to Radio 17, it always stayed 16 (like in the image posted on the 2nd message, I have never seen it read Radio 17.xxx).
Thanks
berrywr said:
"Lund123" I need you to listen to me for a moment...if your device is stuck at the HTC logo on startup, your radio is incompatible with the ROM on the device. If you have already flashed the custom ROM and it requires you flash the radio it will be with the entire package you downloaded. I use Eburon 2.1; the radio and ROM are separate and both must be flashed from bootloader mode. To use Eburon you must flash the radio that comes with it. Your device is HSPL; it needs no further tinkering with. The custom ROMs can be flashed at will. One warning, a return to official stock ROMs will likely re-lock your phone. The goal of these threads are to achieve what you apparently don't realize; you are HSPL. It is not automatic for many of us to achieve this; HSPL opens your device in a way that can only be described a dream. You're lucky! Flash the radio separately from the bootloader; it's no different than flashing the ROM. In regards to having to re-enter a code; it appears your device may not be subsidy (carrier) unlocked or there is a security lock put on the device which it will ask before it launches the OS. That may require you running what a few of us in the old days did with our HD2s and Rhodiums...perform a task 29, but you may need a deeper "wipe" something akin to a low-level format on a PC.
Click to expand...
Click to collapse
lund123 said:
"berrywr": I get that HSPL is already on the phone, and I am grateful for that. But I believe, I have loaded both the custom rom + radio that comes with it with no positive results.
I have tried the Dynamics ROM (as an example) and the Radio that comes with tit. First I flased the ROM uising the bootloader method. Then I repeated the same for the Radio. Same results, stuck on HTC logo. I have used the RUU program that it comes with to load the roms. I even have tried using the GOLDCARD for these roms, but same results. And Yes, I get it that I need to install the rom first and then the radio that comes with the package. Interestingly, my Radio on the SPL screen never changes to Radio 17, it always stayed 16 (like in the image posted on the 2nd message, I have never seen it read Radio 17.xxx).
Thanks
Click to expand...
Click to collapse
It's possible you have the radio glitch where the radio does not change after flashing. Have you tried searching the Titan thread, to see if anybody else has mentioned the problem? I know I swear I've seen this happen to other users...I will do a search tonight to see if I can find anything.
I have looked around and most of the folks are having trouble getting the HSPL to load, my problem has not been stated elsewhere that I could find. I for some reason have the HSPL but I cannot do the following:
1. Cannot use the HSPL program to revert back (uninstall HSPL). When I tried to install OSPL from within the program it errors out.
2. If I install any other radio than 16, it does not take affect - the update goes successfuly, but the SPL screen shows radio 16
3. I cannot install the SPL 2.6 from HTC - it does not take affect. The SPL screen still shows 2.5. Since I cannot have SPL 2.6, I am unable to get some OS updates.
Will keep looking. RUU and goldcard programs - both working properly but result in same outcomes.
xconomicron said:
It's possible you have the radio glitch where the radio does not change after flashing. Have you tried searching the Titan thread, to see if anybody else has mentioned the problem? I know I swear I've seen this happen to other users...I will do a search tonight to see if I can find anything.
Click to expand...
Click to collapse
hiii there .. can i find a link to htc titan stock cingular rom or nbh files for debrand ?
Related
FIXED! Read below for details.
So i've been messing with my mogul for nearly 4 hours now trying to convert it to dcd's rom..and i've flashed it twice now and after it reboots from being 100% loaded it just sticks on the HTC black screen..I've read and read and searched and searched and cannot find a definite answer. Can anyone help?!
basics?
did you load the radio rom?
did you load the unlocker?
you may need to restart the phone to the boot loader and resend the rom
(press and hold camera and power and push reset button)
I did TRY and reload the radio and unlocker..now im stuck at the black htc screen where it says no radio though. bleh. i can't even get it back up and running. what do i do?
edit:
I'm at the multi color screen..ive tried running the unlocker RUU and then running dcd's ruu and it doesn't work..and the radio RUU does not run at this screen...I can't get the phone back to a working status! Argghhhh. It wont let me run the relocker unless im in activesync...but i can't be recognized in activesync unless the phone is up and functional..so..? how do i relock it to put hte stock rom on to try and unlock again?
I am kinda stuck in the same spot, but mine is is the verizon logo screen, i tryed doing the power,camera and hte reset button but its till stuck, i tryed the relocker but i need to be in active sync
any help?
what i dont get is..i flashed it with the unlocker, then the rom then the radio...isn't RUU just overwriting each one or something? it doesn't make sense to me. and all i can do is run RUU..i did the rom, then the radio and it was stuck in the bootloader so i used the exitbl and got out of it but then it just went back to going to the HTC black screen saying no radio. ..i'm gonna try and flash the rom from a sd card next..we'll see what happens..
jkrolcz said:
I am kinda stuck in the same spot, but mine is is the verizon logo screen, i tryed doing the power,camera and hte reset button but its till stuck, i tryed the relocker but i need to be in active sync
any help?
Click to expand...
Click to collapse
This just happened to me after flashing the ROM but not the RADIO yet. Flashing the Radio fixed the problem.
I've flashed the radio..then its stuck in the BL and i use the program to get me outta it then it just keeps saying i have no radio! what the hell..this sucks. i'm in the worst possible situation to have to buy a new phone
There are three parts to the "operating system" of your phone.
1. Bootloader (also called locker, unlocker, re-locker, SPL)
2. Radio
3. ROM
The three components are saved in discrete portions of the device's memory. Flashing one does not overwrite the others. All three must be compatible for the phone to operate properly. If you stop the upgrade process recommended by the ROM compiler prior to completion, your phone may not operate properly. If you flash the "leaked" 3.16 ROM package, it contains all three components.
To use the 3.16 stock OEM ROM, or a custom ROM based on the stock OEM 3.16 ROM, you must have a level 3.xx radio and a level 2.xx bootloader. The current implementations of those are the 3.27 radio and either the stock bootloader distributed with the "leaked" 3.16 ROM package, or the Olipro 2.40 unlocker.
If you are running a level 2.xx stock OEM ROM, or a custom ROM based on a stock 2.xx OEM ROM, you must have a level 1.xx bootloader and a level 1.xx radio.
Custom ROMs are not always named using the OEM convention, so you must research the custom ROM to determine whether it is based on a level 2.xx or 3.xx stock OEM ROM.
I hope this helps all of you get your phones back up and running.
FIXXXED!
So heres the best description I can give of what was going wrong for me..Its my first time trying flash to a different rom..and well it didn't go so well. First, I used the titan unlocker, then installed the radio (not sure which one) and then some form of the newer dcd rom and i was getting stuck on the black HTC smart mobility splash screen where it said "no radio". I had to have messed around for over 5 hours today at college trying to figure it out by doing different arrangements what order i installed the radio and unlocker and rom in. I couldn't get it to connect with activesync so i couldn't use the titanunlocker.exe..all i was going off of was RUU's. Im not sure whether or not what OS I was using effected it..I was playing in Vista earlier today but had done the correct steps to install the drivers, and now this last time i did it on XP. This last time I ran the 3.27 radio RUU as found.. here ( http://forum.xda-developers.com/showthread.php?t=362563 )...Theeen I ran this form of the newer sprint ROM. (I'm pretty sure they say it comes with a included in this RUU, but i'm just stating exactly what I did) the .651 rom can be found.. HERE ( http://forum.ppcgeeks.com/showthread.php?t=16806 ) He had a error when packing or something so you have to manually rename it to .exe because it was missing a e..I did this within winrar before extracting..ran that and about 10 minutes later it booted up and i've got service. I'm not going to promise that this is 100% functional all i'm saying is im out of that horrid black HTC screen where I can now go on to try and get the correct rom i wanted. Hope this helps..may be a bit confusing and probably did things wrong but this was my first time doing it all.
Hey all,
Been trying just about everything to help a buddy out, but I've been failing repeatedly.
He got a brand new phone yesterday and found the XDA Titan Wiki to install the GPS enabled ROMs. He loaded SPL 2.4, then installed DCD 3.2.0. It got stuck at the Verizon screen when it restarted...then he apparently downloaded the Radio 3.42.30 to try and install that to get out of it (maybe thinking the Radio needed to be installed for it to get through). Now he's stuck at the White Verizon screen, and it says "No Radio".
Sounds like from when I read the Wiki he was supposed to install an intermediary Rom before jumping all the way to 3.2.0.
I've suggested using the Olipro SPL 1.2 unlocker, the Titan Relocker, several different ROM's and am at a loss as to how to fix it. He's still stuck at the Verizon screen displaying "No Radio."
Any suggestions?
Thanks
I went from stock to 3.2.0 / Radio 3.42.02.. no problems.
I have not loaded 2.42.30 (I prefer to use the radio version released by HTC for this device.. 3.42.30 was released for another device and ported.. although it seems to work for everyone.)
I HAVE read that for radio 3.42.30 you need SPL 1.20 for USB Flashing.
gc14 said:
Yeah 1.20 is needed to flash these radios via USB. Just need to put 2.40 back when you're done.
Click to expand...
Click to collapse
Based on that.. I assume SD flashing is ok with 2.40.
scotcha12345 said:
... (maybe thinking the Radio needed to be installed for it to get through)....
Click to expand...
Click to collapse
Yes! This is well documented.. a common issue.
If you flash the Rom without a compatible radio.. you will get stuck on the verizon screen... I suggest flashing the ROM AFTER the radio.. since you flashed the Rom already... when you get the radio working, Reflash the ROM.
Did you flash the radio via SD Card or USB?
Did it show a progress bar while flashing?
Let us know how your attempting to flash the Radio (USB or SD) With specific steps (held buttons X, Y, and Z.. saw this message, pressed this key.. saw this on the screen) .. and someone will let you know what you might be doing wrong.
Also.. dont forget to run the carrier cab when your done.. This is worth mentioning since it's the most common issue once the device boots and you cant program the phone, or make data / voice connections.
scotcha12345 said:
Hey all,
Been trying just about everything to help a buddy out, but I've been failing repeatedly.
He got a brand new phone yesterday and found the XDA Titan Wiki to install the GPS enabled ROMs. He loaded SPL 2.4, then installed DCD 3.2.0. It got stuck at the Verizon screen when it restarted...then he apparently downloaded the Radio 3.42.30 to try and install that to get out of it (maybe thinking the Radio needed to be installed for it to get through). Now he's stuck at the White Verizon screen, and it says "No Radio".
Sounds like from when I read the Wiki he was supposed to install an intermediary Rom before jumping all the way to 3.2.0.
I've suggested using the Olipro SPL 1.2 unlocker, the Titan Relocker, several different ROM's and am at a loss as to how to fix it. He's still stuck at the Verizon screen displaying "No Radio."
Any suggestions?
Thanks
Click to expand...
Click to collapse
Can you get to the bootloader by holding down camera power and pushing the reset button? If so, you can flash the radio with the SD method found in the wiki. just put the radio on the sd card in the proper format and enter bootloader and it should correct your problem.
Can I suggest something to try? (assuming you have 6800)
1. Get the sprint release. http://forum.xda-developers.com/showthread.php?t=402887
2. in bootloader, load the sprint release by usb method. when it gets to having you touch the screen, soft reset.
3. In bootloader, load the dcd 3.2.0 rom (or any other rom).
4. Hard reset.
This should give you 3.2.0 rom and 3.42.02 radio.
Responses
Hey guys,
Thanks for the responses and suggestions.
1) At the moment he doesn't have an SD card aside from the SDHC, so he couldn't do that until he purchases one. Good idea though if nothing else works
2) When pressing the camera/power/reset he's in the SPL 2.4 bootloader screen, he's going to try your suggestion of downloading Sprints and upgrading.
3) I'll ask him procedurally what else he has tried, what error he gets for recording. No doubt you were correct about uploading the Radio before the ROM
I've actually flashed my phone exactly the same way he has so that I can try to experience the same problems, and try to figure it out myself.
Bingo
Hey,
The Sprint ROM .exe was the answer. Very smart, thanks again for helping us both out. Was getting a little nervous for about 2 minutes.
useful=helper++
I did the same thing. Thank you very much...saved my butt!
BC
its alive
spreeway said:
Can I suggest something to try? (assuming you have 6800)
1. Get the sprint release. http://forum.xda-developers.com/showthread.php?t=402887
2. in bootloader, load the sprint release by usb method. when it gets to having you touch the screen, soft reset.
3. In bootloader, load the dcd 3.2.0 rom (or any other rom).
4. Hard reset.
This should give you 3.2.0 rom and 3.42.02 radio.
Click to expand...
Click to collapse
you saved my titan...thanks guy!
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Da_G said:
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Click to expand...
Click to collapse
Removed the SD and it stays at the tricolor screen with the spl version as mentioned in 1st post.
Also, displaying the Upgrade ROM code error, please try again message
The mode is currently serial
What can I do from here?
fireblade63 said:
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Click to expand...
Click to collapse
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
NotATreoFan said:
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
Click to expand...
Click to collapse
Hey man, thx for stopping by..
If I understand correctly, SSPL runs through the device which is stuck at bootloader currently... or am I hopefully wrong??
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Da_G said:
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Click to expand...
Click to collapse
Keep in mind im currently on stock SPL, do u think flashing the stock ROM is ok?
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
dude....i hate to say this...butyou might be s.o.l. at this point. i did the same to my fuze not too long ago... tryingto flash anything to the phone just locks it up.i was lucky enough to bs my way through an att guy to get me a new one (was still under the 30 day warranty).
Da_G said:
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
Click to expand...
Click to collapse
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
I had the same problem as you and could not flash any rom, Always get Invalid vendor ID.
You need the right Stock Rom to flash and in my case in the middleeast, the Stock Rom is so far only available in at HTC.
I had to take the phone to HTC Service Center and they flashed the correct Stock Rom and charged me as they did it out of warranty.
Regards
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
fireblade63 said:
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
Click to expand...
Click to collapse
Post in the HardSPL thread asking which ROM the SPL originated from. Once you know that, you can download the appropriate ROM from the Wiki.
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
shafez said:
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
Click to expand...
Click to collapse
The CID is determind by the SPL.
Look up the error code posted... everything points to HardSPL. Back in my Wizard days, HardSPL did not exist, and we just did a CID unlocking. This is not the case with newer devices.
All ROMs are not created equal. Each WWE ROM checks for specific information within the SPL, and if it doesn't find what it's expecting, fail...
stepw said:
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
Click to expand...
Click to collapse
I'm not sure
Where can I know that?
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
fireblade63 said:
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
Click to expand...
Click to collapse
Since you cannot get past the bootloader, your only option is to find the WWE ROM that matches the SPL you flashed. Even though the HTC ROM Tool "signs" the NBH file, it still won't fool the stock bootloader... if it did, we wouldn't need HardSPL.
My phone is running on
OS VERSION:5.2.23569
MANILA VERSION:2.5
ROM VERSION:Cruzer 5th WWE
Radio Version:2.15.50.14
I've had enough of using the Cruzer 5th rom already and wish to update back to the normal Official HTC ROM. I've downloaded the RUU_Updates for both 1.66 and 3.14 and both have failed in updating the phone's ROM.
The problem is that once my cpu has detected the phone.
The phone will then reset and get's stuck on the screen which has a few colors.(The one we use to check our HD2's flash version like HSPL). Then the loader on the screen of my CPU will be stuck at 0%. And guess what...before you know it...the entire operation will cancel and it will say that its not able to update my ROM. What on earth? Please help me. I'm only not able to update back to the official rom software. Apart from that,the other cooked roms which have been made available for download from the other users can be used to update my rom.
I need help. Please help me. Thank You! i look forward to your solutions!!!
You can use other roms and if you look/use the search option your answeres are here somewhere
could be a stuck radio rom, there have been several examples where the radio prevents spl and radio (and hence stock roms) from flashing.
try your CORRECT stock rom from sd card flash, if that fails its either
1 - not actually your correct stock rom or
2 - you are flash stuck. no clue how you would solve that.
LekHD2 said:
Then the loader on the screen of my CPU will be stuck at 0%. And guess what...before you know it...the entire operation will cancel and it will say that its not able to update my ROM.
Click to expand...
Click to collapse
I had the same problem like u 2day. All I did was instaling SPL-3.03.HSPL
At first I had two options like SPL-3.03 or SPL-3.03.HSPL to instal, that first one was making the problem that you writing of, but after I instaled SPL-3.03.HSPL I can instal other roms.
LekHD2 said:
My phone is running on
OS VERSION:5.2.23569
MANILA VERSION:2.5
ROM VERSION:Cruzer 5th WWE
Radio Version:2.15.50.14
I've had enough of using the Cruzer 5th rom already and wish to update back to the normal Official HTC ROM. I've downloaded the RUU_Updates for both 1.66 and 3.14 and both have failed in updating the phone's ROM.
The problem is that once my cpu has detected the phone.
The phone will then reset and get's stuck on the screen which has a few colors.(The one we use to check our HD2's flash version like HSPL). Then the loader on the screen of my CPU will be stuck at 0%.
Click to expand...
Click to collapse
I know you said you downloaded the two ROM's from the HTC website. I don't know if you have a TMOUS HD2 then I suggest downloading the official upstream ROM from the T-Mobile website it is the 3.14 ROM.
I think what has happen to you is you had a bad flash and if you flash the 1.66 ROM first then you changed your SPL and now you don't have the correct split to flash the flash the 3.14 ROM. I recomemd you download and use HSPL 4 to change your SPL to SPL 3.03.0000 then try to flash the update ROM. Or you could flash it via your SD card that should force the changing of your SPL with out you doin yourself. JUst my thoughts on the situation.
can somebody please help me, I have flashed 5 different ROM's to my vodafone HD2 and have encountered a varying degree of problems with each one. I would very much like somebody to tell me where I can get a Stock ROM not locked to any carrier so I can reflash my pretty usless fone or indeed to help direct me to a stable cooked ROM that would allow my fone to work again.
Thanks is advance.
P.s - my first post so please be gently, also the last 3 I have tried are Artemis ROM's with no sucessful outcomes.
peeko1979 said:
[Q] htc hd2 stock rom 6.5.3
Click to expand...
Click to collapse
there is no stock rom that is 6.5.x They are all 6.5
Not sure what you mean by stock rom not locked to a carrier, , do you mean a non branded rom (the ones marked HTC WWE, look HERE or in the various threads in the rom development section.) or do you mean you want to unlock your phone to use any network? in which case no amount of any kind of flashing will do that. Ask voda for a code, or buy one online.
Sounds to me like you need to return all the way to stock and start over. Get any of the voda roms from that link above (theyre marked vodaphone, you cant miss em, theres a 1,43 one, a 1.66 one ((if you're a brit)) or 1.72 if you have a european language voda.
Get that, and either
1 - remove hspl by running hspl.exe and choosing 1.66.0000
then
2 - run the downloaded rom.exe and flash over usb
or
1 - extract ruu_signed.nbh from the rom.exe you downloaded,(look it up if you dont know how) copy it to a formatted fat32 sd card smaller than 8gb, and rename it leoimg.nbh then start the phone into bootloader and it will ask you if you want to flash.
that way you are back to teh start, and you can apply hspl and start again.
(For people reading this thinking 'he didnt say do a task29',, its my understanding that using the official .exe to flash the rom does a task 29 anyway, and its been edited out of customruu.exe so it can be used to flash radios without wiping the rom,,,correct? yes no?)
I try 6 Rom but noone will work fine
Vodafone rom 1.72
I am not looking to unlock the fone, simply find a Rom that is 6.5.3 that is stable. I have just flashed back to voda 1.72 but that is 6.5, im fussy and don't like the start button at the top. I'm in scotland so need something that will work here ok on vodafone.
I was hoping to find a rom that had not been altered and as such an original (Stock) ROM.
your help is much appreciated.
There are no such stock roms for the HD2. If you want to flash a stable rom in the style you like (start button at the bottom) then you will need to HSPL (search the forum) your phone and I suggest you start with Dutty's rom. It's very stable and as close to stock as can be. You can always flash back to an original rom for warranty reasons if you need to.
tnx, trying one now. fingers crossed.
ok, just flashed one of duttys roms but now my phone will not boot, it turns on and stays at the htc splash screen. Wont turn off have to pull out the battery. If it will not boot how can I re-flash it? Any suggestions?
did you flash hspl? you will also need the newer radio 2.15.50_04
Quote from Dutty's first page:
Things to Know how about my ROMs:
* HSPL 1.66 Minimum required
* New Radio 2.15.50.04 can be flashed here:
http://forum.xda-developers.com/showthread.php?t=801252
* :Added XDA UC_NET_v0.94 for Auto install see here for instructions:
Thanks to ahirshfield for recommeding it and serfer222 for great work.
http://forum.xda-developers.com/showthread.php?t=709557
* :HSPL 1.66 Minimun recommended
* :Radio 2.10 / 2.11 / 2.12 / 2.14 / 2.15 NEEDED for ROM
* :No Radio version is included in these releases:
* :Correct radio needed to enabled 576 ram for NON-T-Mous HD2 users.
* HD2 Radios can be found here:
http://htcpedia.com/forum/showthread.php?t=2199
I hope you did some reading before you flashed!!
Put your phone into bootloader by holding the vol down side key and use a pen to push the little reset button when the back cover is removed. You should get a tri colour screen which shows you the hspl version you have. If you do this you can flash the correct radio which is probably why the phone will not boot.
all I have done previously is downloaded .nbh files and used SSPL_RUU.exe to flash and they have all flashed sucessfully, but with the after effects of either connection problems or freezing issues.
I have managed to re-flash to the vodafone 1.72 software so at least it is working again, this is not by any means where my talents lie. im a hardware guy, not software, so finding this all a bit confusing. I may just go with the artemis v33 rom which seemed to work the best apart from occassion signal dropouts.
Just out of curiosity - which hspl and radio are you using?
in the settings it says radio 2.07.51.22-2 and i believe the hspl was 1.42
just checked bootloader, spl 1.66
peeko1979 said:
just checked bootloader, spl 1.66
Click to expand...
Click to collapse
If you are sure it's SPL, than your problems are normal sir. To be able to flash custom ROM you need HSPL ex (1.66 HSPL)
is there another way to check other than in bootloader?
peeko1979 said:
is there another way to check other than in bootloader?
Click to expand...
Click to collapse
No sir only bootloader.
I have just re-flashed v33 artemis, so will stick with that, might look at updatin radio version tho. all help much appreciated but must away now as wokring in 5 hours.