How to tell if the DNA's MHL is working? - HTC Droid DNA

Hello,
I'm having a problem with the MHL adapter which when connected to either of my TV HDMI ports (which worked with the bionic's micro HDMI cable) gives a white snow pattern. The HDMI cable sign starts and the audio works. I have gone through 2 PNY connectors with identical results and I doubt that the HDMI cable is the problem.
http://www.pbase.com/ystasino/image/148466367.jpg
http://www.pbase.com/ystasino/image/148466518.jpg
I'm running Hatka's supercharged 2.0.0. but he says he doubts anything in his ROM could cause this and others who have tried his ROM said it didn't affect their mirroring.
Do you know if there's a way I can check whether my MHL connection is working?
Thanks!

Related

[Q] MHL cable compatability?

I just found a MHL cable for the SGS2 on Amazon with Micro-USB to HDMI.
I have a Samsung HDTV bought about a year ago. Now i know that MHL means you can charge as well as view the phone stuff on the screen but MHL TVs have not released yet (i think, and even if they have i wont be getting one anytime soon).
So my question is can i still see the TV out if i use the MHL cable on my older TV? I know it definitely wont charge.
Anyone?? :S
yes you can.
all you need is the adapter from MHL (micro-USB) to HDMI, connect the HDMI to the TV and you are good to go.
the advantage of the original samsung adapter is the ability to connect a power cable to the adaptor and charge the phone while it transmits the picture to the TV.
hope i helped
Thanks mate
For anyone confused, an MHL cable is a Micro USB to HDMI cable - no ifs, no buts, this will transmit HDMI from a compatible MHL port. Nothing else needed (except I believe it must also be connected to power)
Your micro USB port on the bottom of your SGS2 is an MHL/USB port, and will therefore work.
Important to note is that not all micro USB ports are also MHL ports, therefore will not necessarily work on some other micro USB port on a different phone.

[Q] How do i use MHL?

Hi guys, i bought the MHL adapter from T-Mobile's website for the Sensation 4G (i have an Evo 3D). I set everything up, plugging the MHL adapter into my phone, standard HDMI into the adapter and TV, and the usb cable into the adapter...
After plugging everything in nothing happens. I even tried playing a video and nothing occurred. How do i activate the video out? Do i just have a bad MHL adapter?
A few questions. Does the battery icon on the phone show it is charging? This means that power is going to the adapter and to the phone. If not, try changing power adapters. If the charging icon is there, then try changing HDMI cables. If this doesn't work, you might have a bad MHL to HDMI adapter.
with your tv off, plug your mhl adapter into your phone, plug your power cable into the adapter, turn your tv on and bam! (note that the hdmi doesnt display the lockscreen)
Rydah805 said:
with your tv off, plug your mhl adapter into your phone, plug your power cable into the adapter, turn your tv on and bam! (note that the hdmi doesnt display the lockscreen)
Click to expand...
Click to collapse
My lockscreen shows and boot animation , Also to OP ...the hdmi mirroring is not as stable as HDMWIN is for the OG Evo imo, i had to play with it a bit to first get a picture on my Sammy (unplug/replug/reboot etc.)...then i got pic without sound (OG worked w/audio), ended up running hdmi through my Yamaha amp and that worked. Still not as stable as my 4g evo....LAME
btw I've read usb can't be plugged into pc for powering, must be plugged into wall adapter
louforgiveno said:
btw I've read usb can't be plugged into pc for powering, must be plugged into wall adapter
Click to expand...
Click to collapse
my macbook pro powers it fine. weird.
I was using it with my stand that had a video on/off button to turn the display on an off. Everything was mirrored fine but I had no audio and hulu was intentionally shutting off the hdmi before any video played. Are they blocking media streaming apps from displaying through the mhl adapter? Oh an i powered mine by pluging it into my ps3.
Eat it iPhone said:
Hi guys, i bought the MHL adapter from T-Mobile's website for the Sensation 4G (i have an Evo 3D). I set everything up, plugging the MHL adapter into my phone, standard HDMI into the adapter and TV, and the usb cable into the adapter...
After plugging everything in nothing happens. I even tried playing a video and nothing occurred. How do i activate the video out? Do i just have a bad MHL adapter?
Click to expand...
Click to collapse
Funny that you ask this. I just got an MHL adapter off of Amazon that was just the adapter itself (micro USB one end, female HDMI on the other).
I connected the HDMI cable to my TV and MHL adapter, then I connected my MHL adapter to my phone. Last but not least, I connected my power adapter directly to the MHL adapter and my phone started charging.
The input should be immediate from your phone but if it doesn't, check the following:
1. Make sure your TV is on and the input is selected for the proper HDMI port. If nothing is detected, the TV should report that it's receiving no signal.
2. Make sure the power cable is plugged into your MHL adapter. From my experience, it will not push out the HDMI signal without external power.
3. From my experience, you have to connect your phone to the MHL adapter LAST. NOt sure why but if everything else checks out fine and your phone still isn't pushing out a signal, reconnect the phone to the MHL adapter. You should get an HDMI icon on your top bar.
I have the EVO3D stock.
Everything works fine for me (pictures, music, video) except Netflix. For some reason Netflix looks extremely pixellated. Not quite sure why when everything else looks fine.

No Audio Transfer Through ACCELL MHL HDMI Adapter

Just received my MHL adapter. Transfer video just fine, but sound still only comes out of the phone. I could have sworn the Evo 3D was capable fo 5.1 sound via HDMI.
Is there a setting I'm missing somewhere?
I got my MHL adapter from T-mobile.....and it transfers both video and audio just fine.....sound stops coming out of the phone and comes from the tv once connected, I did not have to enter any settings that I recall
Anyone have any ideas what may be wrong here?
I'm using the ACCELL MHL adapter. Plugged into the external power. I can't think of anything I'm doing wrong.
Have you tried a different port on the tv??? Or try the adapter on a different tv to rule out the tv's or the phone. Or it might just be a bad cord.
Locked & Loaded
" Shooter on Deck "
Sorry to bump up an old thread but I just received my MHL adapter cable (Menotek) and am having the same issue of not getting the audio feed to the TV.
Video works great but no audio no matter what I try.
This is the adapter I bought. Anyone have any thoughts about it? Is it really a piece of junk?
http://www.amazon.com/gp/product/B005F9W6DU/ref=oh_o00_s00_i03_details
Update:
Went out and purchased a new HDMI cable and now both audio and video work well coming the E3D. Strange since the original cable worked with no problems with my BoxeeBox.

[Q] 11 Pin MHL + USB OTG

Hey there, i have tried gathering information about this subject and it seems all threads always lead to this announcement:
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Short: Samsung have changed to an 11 Pin-out to enable USB OTG and MHL Hdmi out at the same time. I purchased an original HDTV Adapter (EPL-3FHUBEGSTD) which as far as i can reliably count indeed has about 11 connectors inside the USB connector that goes into the phone.
Now, i can get HDMI out just fine, but ONLY when i also connect the MHL adapter to a power source (a PC USB Port will do fine), however i have also read, that the phone is able to power the MHL adapter itself but obviously would not be charged then (no surprises there). This does not work however.
Further, connecting a USB OTG cable to the micro usb port on the MHL adapter does nothing. No notification and no devices connecting. No power either, since the LED on my USB Hub does not light up as it should. Connecting any devices to the hub does nothing to change that situation. If i leave out the MHL adapter and connect the USB OTG cable directly to the phone, everything works perfectly. I have tried this with 2 different OTG cables so they are not the problem.
This is an original genuine HDTV Adapter for our phones, which according to that post should be working fine with USB OTG.
AFAIK, this topic --does-- come up more frequently now as i can find a few more discussions about it, albeit none really helpful:
http://android.stackexchange.com/qu...-of-11-pin-mhl-connector-in-samsung-galaxy-s3
http://forum.xda-developers.com/showthread.php?t=1743128
http://forum.xda-developers.com/showthread.php?t=1803079
http://en.wikipedia.org/wiki/Mobile_High-Definition_Link#11-pin_MHL-USB_Connector
http://forum.xda-developers.com/showthread.php?t=1811435
That wiki entry is the most interesting link as it definitely states that using MHL and USB OTG simultaneously is possible and is also the reason why the 5 pin layout was changed to an 11 Pin layout.
Looking forward to reading your replies!
the ability to use MHL and OTG simultaneously would give the S3 so much more purpose. It is powerful enough to replace a desktop computer used only for light stuff like browsing and watching videos, and even simple gaming. If samsung made a dock like the one for the motorola atrix I'm convinced they will broaden their target group. The atrix got everything right with this but is inferior hardware wise. I love the idea of a one device for everything concept. Unfortunately it doesn't rhyme very well with the growth society.
Love the MHL and the OTG is even better only after I got the correct cables as the cables changed on S3 to the S2 version, unlimited space for watching films on my phone is now awesome and even better connecting it to to the TV just need a good dock,
is there perhaps any expert advise on this? According to multiple sources it should work but really doesnt. Did i buy the wrong mhl adapter?
I think they will only both work together when being used with an MHL enabled tv. That way the power comes from the tv and the usb on the adapter can be used for the usb-otg cable.
Sent from my GT-I9300 using Tapatalk 2
But if i connected the MHL with the s3. Would sound come out of my phone AND my TV or just my TV. If it justs comes out of my TV, then can i hook up my bluetooth headphones and listen to my video or it would not allow me?
Thanks
joysleep said:
But if i connected the MHL with the s3. Would sound come out of my phone AND my TV or just my TV. If it justs comes out of my TV, then can i hook up my bluetooth headphones and listen to my video or it would not allow me?
Thanks
Click to expand...
Click to collapse
I think you already got a reply in the other thread on this, you should use subscriptions.
mertzi said:
I think you already got a reply in the other thread on this, you should use subscriptions.
Click to expand...
Click to collapse
It wasnt clear.
No1 knows the actual answer to this questions. Really frustraing
joysleep said:
It wasnt clear.
No1 knows the actual answer to this questions. Really frustraing
Click to expand...
Click to collapse
Ah ok sorry! Afaik you should be able to choose your headphones as primary audio source in the bluetooth settings. I know I can choose what I want to be output to my bluetooth headset, but I don't own an MHL adapter so I don't know about that. Someone with one should be able to try it, and if they don't own a bluetooth headset/pair of headphones they could try with wired ones and see what happens.
mertzi said:
Ah ok sorry! Afaik you should be able to choose your headphones as primary audio source in the bluetooth settings. I know I can choose what I want to be output to my bluetooth headset, but I don't own an MHL adapter so I don't know about that. Someone with one should be able to try it, and if they don't own a bluetooth headset/pair of headphones they could try with wired ones and see what happens.
Click to expand...
Click to collapse
I have recently received an MHL connector (5 pin type) and the samsung 11 to 5 pin adapter for it. I can confirm that if I plug my OTG cable into it, and then into my powered USB hub, I can get the MHL to work just fine, both video and audio. The OTG cable powers it just fine, but does NOT allow me to use other devices attached to the USB hub.
I am still researching. I suspect you need to bring all 11 pins off the phone with a splitter of some sort, or possibly wire data lines through the MHL. Probably not with the 5 pin MHL connector and 11 to 5 pin adapter, but with the full 11 pin MHL adapter. I am not up to that level of hardware hacking. I suspect whoever does it first can sell a BUNCH of them!
Oh, and I have a Moto Lapdock for my Raspberry Pi, and would love to hook my S3 to it too!
Scott

[Q] Mhl and HDMI trouble

I've bought a cheap mhl cable and I can output my phone to my TV, but it only does 1080p at 30hz.
Does anyone know how to change this?
I would much rather have a lower resolution but 60hz refresh.
I'm currently using cyanogenmod, but can't see any settings for mhl or hdmi.
Also, what happened to mhl 3.0?
How did you get the output to work, tried with an mhl cable I have but got no picture
Mr.R™ said:
How did you get the output to work, tried with an mhl cable I have but got no picture
Click to expand...
Click to collapse
I simply plugged the hdmi cable into the mhl, a USB charger into the mhl and then the mhl into the USB port on the phone. The display duplicated instantly. No problems with it working straight away, just dipped to 30hz on screen and was REALLY laggy.

Categories

Resources