I've got a sixaxis/controller issue... I can pair the ps3 controller fine with the prime. I can also create my own button map profile and save it in the sixaxis app and I can then subsequently 'see' the profile in the sixaxis app active profile and can select it.
However when I play mc4, is acts like it can't 'see' my profile or doesn't 'know' to use sixaxis controller and/or the sixaxis app at all... it just uses the default controls and my right analog isn't working... i have 'enable gamepad' selected also in sixaxis input settings. any advice would be appreciated.
Edit: disregard...I simply didn't have the controller paired properly to six axis, i.e. I didn't start the app, pair the controller, THEN launch the game. Thanks.
Sent from my Transformer Prime TF201 using xda app-developers app
Related
So I asked in the Q&A forum if SixaxisPairTool APP, a PS3 controller enabler, worked for the Atrix 4g.
http://forum.xda-developers.com/showthread.php?t=1221652
I have received multiple confirmations that this App works. I do not know about any ROM specific bugs or disabilities.
Seeing that I could not find a PS3 controller app/support before this, I configured a Wii remote instead, and it worked flawlessly in N64iod.
I would like to share both then
TO INSTALL PS3 CONTROLLER SUPPORT
Before you buy the app, there is a checker that see's if your device is capable. I would download that first and check just in case.
http://www.engadget.com/2011/08/09/sixaxis-controller-android-app-makes-firing-off-hadoukens-easy-a/
ALL CREDIT GOES TO THE DEVS
TO INSTALL Wii REMOTE/NUN-CHUCK/CLASSIC CONTROLLER SUPPORT
(Includes Download and instructions)
http://android.ccpcreations.com/wiicontroller
To enable support in N64iod, go to options, other settings, check "use input method/enable special input through IME".
Then go back to settings, go to input, and hit key mappings.
Nunchuck/classic should be plugged into wii remote before mapping keys.
This is the result (replace the Asus Transformer with your phone) ===>>>>> http://www.youtube.com/watch?v=WZpzEZXE8yI&feature=related
ALL CREDIT GOES TO THE DEV
I dont own a PS3 but ive found that the Wii App "Wiimote Controller" by C.C.P. [email protected]
Works great with my AT&T Atrix 4G.
Works with Nesoid, Snesiod, N64iod those are all i have installed but it works great with them.
It's awesome
I'm wondering if someone could help me find a solution for using either the ps3 controller or wii remote as a remote for PowerAmp and maybe other apps such as Podtrapper?
Maybe a macro app? any ideas?
Sent from my MB860 using XDA Premium App
Would it be possible to pair two ps3 controllers, one wired one wireless in order to play games in two player through an hdmi connection?
Sent from my Evo using XDA App
got_killed said:
Would it be possible to pair two ps3 controllers, one wired one wireless in order to play games in two player through an hdmi connection?
Sent from my Evo using XDA App
Click to expand...
Click to collapse
Or you could just use sixaxis and pair both.
soulctcher said:
Or you could just use sixaxis and pair both.
Click to expand...
Click to collapse
Thanks, I wasn't sure that I could pair two ps3 controllers through sixaxis.
got_killed said:
Thanks, I wasn't sure that I could pair two ps3 controllers through sixaxis.
Click to expand...
Click to collapse
Yup...it's a great app. Just make sure to go into the preferences and set all your button mappings in sixaxis before going to do so on games.
Two controllers connected, but unable to play
Hello!
I used the sixaxis app and paired 2 ps3 controllers correctly, but was unable to player any two player SNES game.
I'm using Snesoid on a Galaxy SII (4.0.3) and when I open the emulator and put a two player game (like Street Fighter) both controllers command the player 1!!
The gamepad preference in Sixaxis is checked, the controllers are assingned with different red lights (1 and 2) and I've done the mapping and SNESoid for both Gamepads. Also the GamePad 2 option is checked.
Any help?
So finished setting up Splashtop and I'm loving it. I have horrible internet speeds but it still works pretty well. I only wish I could find a way to control my PC games using my PS3 controller that is connected to my tablet. I have not tried a USB controller or my 360 adapter so that may work. If anyone knows how to get this to work it would be greatly appreciated.
The program is just a simple remote feature and runs on just basic commands and doesn't recognize game pads. There would have to be another layer to the commands to a virtual game pad installed on the pc that could relay the commands.
It does support controllers, just connect it through USB and make sure you are in gaming mode (3 finger tab).
I've been playing skyrim that way using a ps3 controller
Sent from my Transformer Prime TF201 using xda premium
ah don't have a USB controller here.
grivy said:
It does support controllers, just connect it through USB and make sure you are in gaming mode (3 finger tab).
I've been playing skyrim that way using a ps3 controller
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
I've been wanting this specific answer more than anything. This makes me so happy to hear.
I suspect that it's using the native gamepad element in ICS, which makes me hopeful that someone using a PS3 controller & the Sixaxis app with the "Enable Gamepad" setting checked would work too. Good God this makes me excited..
PS3/Splashtop
grivy said:
It does support controllers, just connect it through USB and make sure you are in gaming mode (3 finger tab).
I've been playing skyrim that way using a ps3 controller
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
how did you get it to work. I have been messing around with this for days and can't get anything but the D pad and Select button to pick up.
Despite the thread being old I wanted to let everybody know that I've had some success with this, maybe it'll help somebody else in the future. I recently tried using my DS3 with Splashtop GamePad THD via Bluetooth (on a Nexus 7, but it shouldn't matter) and much to my surprise, it works.
I used Sixaxis Controller to pair my DS3 via BT and I enabled the option to have it appear as a regular gamepad. I opened up Splashtop THD, connected and it worked! What I found though, was that it actually depends on the profile you choose. I couldn't play Portal 2 with the profile because for some reason it didn't have enough controller buttons mapped. I switched to Skyrim, reconfigured the key bindings in Portal 2 and it worked well. I find that it's very badly designed, rather than having to use some specific profile, they should just have a way to configure the controller for each profile. Maybe there is a way and I haven't found it.
In any case, the DS3 works via BT, but mind that you're not going to get analog movement control on your PC, since moving the left stick just sends WSAD.
Hey guys, I am considering 2 buy a new controller for my prime. i currently have a PC wireless xbox 360 controller, for this to work on the prime i need 2 use the usb dongle given 2 me when i purchased the controller. also Something is wrong with the probably my tabs understanding of this controller as when i use it in gta or whatever it thinks that the joystick is looking upwards(this does not happen on my desktop). Was wondering if any1 else had that problem.
Also reasons for considering changing is that I do not understand how I can map keys on my controller. there is only 1 app available for this(for the xbox 360 controller) called joy something if im not mistaken. If any1 knows of a tutorial of this I would be great full if you share it with me.
What controller does the trick for you on android devices(any links to it?)
thanx in advance guys
PS(has any1 got to play asphalt 7 with a controller? love racing games)
i'm using a ps3 controller, works perfectly with all supported games .
With the sixaxis app, you also can configure mappings for non-controllergames like Modern Combat 3
mc_tdm00 said:
i'm using a ps3 controller, works perfectly with all supported games .
With the sixaxis app, you also can configure mappings for non-controllergames like Modern Combat 3
Click to expand...
Click to collapse
i tried the ps3 controller(snatched it off a friend but i was annoyed that I had to use the stupid wire:/) anything else working with sixaxis but not being a ps3 controller(its also expensive to buy 1:/)
You dont need to use the wire if you pair your controller with your tablet.
Yes u even can connect a ps3 controller to your Tablet without using the usb port on the dock. But you need the mac adress of the controller.
Here is a "How to" connect Ps3 controller without usb via bluetooth:
http://forum.xda-developers.com/showthread.php?t=1503887
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
Hi, i got and Galaxy S3 with no root.
I bought an fake PS3 controller that works directly with an OTG cable. It work very well and I can directly navigate and use it in games.
But with some games, i need to remap the controller to be able to play (for example the analog sticks). I downloaded USB/BT Joystick Center 6, but it dosent find the controller when i tap "search". I wonder if I need somehow disable the native support for the PS3 controller so the USB/BT app will recognize it? If so, how can i do that?
Rammoshe said:
Hi, i got and Galaxy S3 with no root.
I bought an fake PS3 controller that works directly with an OTG cable. It work very well and I can directly navigate and use it in games.
But with some games, i need to remap the controller to be able to play (for example the analog sticks). I downloaded USB/BT Joystick Center 6, but it dosent find the controller when i tap "search". I wonder if I need somehow disable the native support for the PS3 controller so the USB/BT app will recognize it? If so, how can i do that?
Click to expand...
Click to collapse
The only real games you can play will be native ones and emulators. Remapping the keys isn't going to work unless its an official ps3 controller and your using the six axis app. Then create some touch profiles.
USB joy center is best used for Xbox 360 controllers. I've never had to use anything else with my ps3 controllers besides six axis app.
Also did you buy the app? (I'm not accusing you either) the cracked version won't work properly.
Sent from my GT-I9300 using xda premium