hi all,
im new to android and i successfully rooted the tablet (if anyone is having trouble rooting T10, im more then happy to help), and now id like to put a custom rom on it of course , but the problem is there arent any that are specifically for Alcatet T10. Id like to try cyanogen or AOKP, but they all focus on specific devices and since there arent any for T10 i dont know which one to chose. More specifically id like to know where does T10 fits in similarity or what not with the other models (tablet, phones) and if there are any that are similar can i use that ROM to install on T10. I just need to know if something bad can happen if I use ROM which is not specifically for T10, and if something goes wrong can I return to stock ROM?
any help is very appriciated, tnx in advance
tablet specs are:
Operating System : Android 4.0.3 Ice Cream Sandwich
Application Processor : Rockchip RK2918
CPU : 1GHz Cortex A8
System Memory : 1 GB DDR3
Storage Capacity : 4 GB NAND Flash
Wi-Fi : 802.11 b/g/n
Audio & Video Play : Built-in audio chip, 1080P HD playback
External Interface : Micro USB, Micro SD
Battery : 3000 mAh, 3.7V Lithium
Camera : Front camera 0.3Mpixel
wiki,cyanogenmod,org/w/P1c_Info --- remove coma and put dots
Samsung Galaxy Tab (CDMA) official cynogenmod ROM
what do you think about this one? its the most similar, has the same CPU, and T10 has 512Mb more RAM
a simple yes/no/maybe would suffice
Rooting T10
Hi,
I am at my wit's end. Trying to root the Alcatel T10. Each time I put it in debut mode and plug it in the USB, my pc just gives the "beep-beep-beep" of device not connected. On my device manager screen, the device shows as Other devices | one, and any attempt to install and/or update drivers just end in miserable failure.
In the past I have successfully rooted my Samsung Galaxy Gio, and Pocket, and unbricked my son's phone after he tried the same, so I'm not completely clueless in this regard. I just cannot get my T10 to connect to my PC in debug mode...
Any and all help will really be appreciated.
Since you say you have successfully rooted yours, maybe you can just point me in the right direction.
Thanks!
Hi, I recently bought the MAJESTIC / Audiola TAB-192 as a cheap alternative to a real tab :laugh: . I have trouble in finding a custom ROM for it or at least an official update to another android version (now it's 4.0.4) because it's an italian brand and there's no technical support (everything on their website is "under construction"). I really need to do something because it can get laggy and sometimes the screen flashes in a pink background ( i don't know how to explain this) and it gets annoying.
Here are the specs on the box:
4GBs of intern memory
9" Multi-touch screen
1,2 GHz Cortex A8 processor
512Mb DDR3 RAM
GPU : Mali 400 MHz
OS: Android 4.0.4 Ice Cream Sandwich
Hope that someone could help me. Thanks in advance
LE: Is there any compatible ROM that could suit my device?
anybody?!
ROM majestic TAB 192
salutgabi said:
Hi, I recently bought the MAJESTIC / Audiola TAB-192 as a cheap alternative to a real tab :laugh: . I have trouble in finding a custom ROM for it or at least an official update to another android version (now it's 4.0.4) because it's an italian brand and there's no technical support (everything on their website is "under construction"). I really need to do something because it can get laggy and sometimes the screen flashes in a pink background ( i don't know how to explain this) and it gets annoying.
Here are the specs on the box:
4GBs of intern memory
9" Multi-touch screen
1,2 GHz Cortex A8 processor
512Mb DDR3 RAM
GPU : Mali 400 MHz
OS: Android 4.0.4 Ice Cream Sandwich
Hope that someone could help me. Thanks in advance
LE: Is there any compatible ROM that could suit my device?
Click to expand...
Click to collapse
you can search for any " M901 " 4.0.4 ROM as " allwinner " or any other china product but....
you have to be sure that the ROM is made for 9 inches tablet
i will attach you a ROM that worked with me perfectly right on the same " majestic TAB192 "
stable ICS 4.0.4 ROM working perfectly fine
sorry to not respond before but i just saw the post
4shared.com
/file/ecDfkpI8/L090-1.
html?
sorry i am new i cant post full link
you have to collect it
thanks brother but you didnt wrote the method to flash the firmware into majestic tab 192
Thank you very much for your help. The problem was solved thanks to you. @shakeelajmal : You need to flash it with LiveSuit. it's easy
My friend give me this tablet to install the Play store. I don't have much experience with tablets and android in general, but I like to experiment so I flashed the tablet with the firmware posted by Future-Gate. Everything went ok, except the wifi that cannot be turned on (the switch stay "on" for a few seconds and then return to "off").
I usually search for info by myself (I revived an almost dead Galaxy S3 some months ago) but at the moment I'm panicked because the tablet is not mine and cannot find much informations.
On another thread I read that it could be a recovery problem (?) or a kernel problem. Somebody could point me on how to check/fix/workaround those problems?
Thank you.
Somebody with this tablet could please make a rom dump? I flashed it without backing up
thank you for the rom. it works well, except for the wifi. might have something to do with the drivers perhaps? i'm not very good with android.
I tried a lot of custom roms and they either worked fine and the wifi wasnt working, or the wifi was working but a lot of other things didn't work. Yours seems to be the best and smoothest, but the broken wifi makes makes the tablet useless. Please help
pls can you help me with the link to get your tab working again, I have an audiola that needs recovery
Hi friends,
I need to refresh ROM in my Goophone i5 V2 MTK 6589 JB
Do you have any backup (oficial, unoficial) of your ROM, please?
My ROM doesnt work...
Thanks for your time.
! I join this request. !
I bought it in gadgetgreats after 15 days and not even tell me where to get the firmware.
Where you bought your?
Mine say it has 2GB of RAM and 8 rom
Good luck
onakvee said:
Hi friends,
I need to refresh ROM in my Goophone i5 V2 MTK 6589 JB
Do you have any backup (oficial, unoficial) of your ROM, please?
My ROM doesnt work...
Thanks for your time.
Click to expand...
Click to collapse
Unfortunately, my phone is FAKE!
I bought a phone from DEALSPRIME!
They declared that the phone is type Goophone i5 II with "quad core" procesor MTK 6589 and screen resolution 1280x720 pix., but you sent me type Goophone i5 with "dual core" procesor MTK 6577 and screen resolution 840x480 pix. which is cheaper...
The phone displays Antutu benchmark (preinstalled) the same data as you wright on their web page, but the other diagnostic programs (android software info or mtk droid tools) displaying different data.....!!!!!!!!!!
Onakvee do you still have the phone?
If so could you do a scatter ROM download for all of us to use that were unfortunately scammed by Dealsprime
Or could you PM me with a scatter ROM from yours as I tried installing a Goophone ROM which obviously didnt work as its a ALPS version and need to return it to original state and forgot to back up first what a numpty i am.
kind regards and thanks for your time
Hi Meecha1,
I still have my phone....
I created a backup using the MTK Tools Droid, but unfortunately it is not complete : (
Is there some mistake ...
PS:
I sent to PM next information.
Backup everything apart with SP Flash Tools (found in various places on this forum) just follow the MTK6577 instructions.
Then get MTK Droid Tools and use "Prepare blocks for Flash Tool". Typically the DSP/Preloader extracts from SP Flash Tool need adjusting. I usually do a raw read for the whole device apart upto the data area.
Hi,
During "Prepare blocks for Flash Tool" the process shows errors.
See this screen:
http://img835.imageshack.us/img835/9698/mtkdroidtoolserror.jpg
Best regards
Maybe its the 6589 after all, hard to say. I heard it's the firmware they used on the first release that's the problem, but who knows really, will find out the truth in the end. Someone reported that elixir 2 found the correct specs and that its MT6589 just that 2 cores are not being used on the firmware. Unfortunately I don't have the phone any more as I gave it away as a gift to my friend so can't perform any tests or grab the ROM data you need. If it is only dual core, I doubt any resellers would of even known, resellers are not so tech savy, they just sell the specs what they are told when they purchase from factories.
The ability to diagnose specs is fairly limited for a reseller. When I had the phone in my possession I watched a few review vids to find out more info and one was from the reseller you mentioned and funnily enough they did an antutu and it showed up as dual core, so it's not like they are trying to hide that antutu says that.
Good luck in your quest!
hello.
I think we have the same goophne.
I read with mobileuncletools:
Ok root (superuser already installed)
CPU
Processor = 7 ARMV processor rev. 0 (V7L)
= MT6589 hardware (really?)
KERNEL
Version3.0.13 = linux kernel (root @ versionserver-desktop) (gcc version 4.4.3 (GCC)) # 1 SMP PREEMPT fri 8 March 2013 14:13:50 CSt
OS
Brand = alps
Models = iPhone5
Product = mobitak77_m01_ics2
Display = ALPS.ICS2.MP.V1.18
SCREEN
Width = 480
Higth = 854
Density = 240 Dpi
RAM MEMORY
Mem total = 1922480Kb
it is very nice and is very fast (1536MHz (x2) with AnTuTu Benchmark 8540) but I have a problem. the phone does not mount sd card.
gabriele75 said:
hello.
I think we have the same goophne.
I read with mobileuncletools:
Ok root (superuser already installed)
CPU
Processor = 7 ARMV processor rev. 0 (V7L)
= MT6589 hardware (really?)
KERNEL
Version3.0.13 = linux kernel (root @ versionserver-desktop) (gcc version 4.4.3 (GCC)) # 1 SMP PREEMPT fri 8 March 2013 14:13:50 CSt
OS
Brand = alps
Models = iPhone5
Product = mobitak77_m01_ics2
Display = ALPS.ICS2.MP.V1.18
SCREEN
Width = 480
Higth = 854
Density = 240 Dpi
RAM MEMORY
Mem total = 1922480Kb
it is very nice and is very fast (1536MHz (x2) with AnTuTu Benchmark 8540) but I have a problem. the phone does not mount sd card.
Click to expand...
Click to collapse
good jod
Hi Gabriele75,
I have the same phone as well, where did you buy yours?, my SD card died and I had to replace it (used a 16g instead), can you read the card when put in a computer? Personally I would replace it with a 16g or 32g then try resolving the mounting problem it may be a faulty card.
Just wondering if you have made a full ROM back up using SP Flash or MTK Droid? If you have or are willing too, please upload to a freeware site with a link on here please for those of us that need a copy to revive our phones.
kind regards
Hi friends!
Unfortunately, my concerns are justified....
- Linux kernel is only 3.0.13 is too low to run Android 4.1 let alone 4.2. You need a 3.4.0 kernel for Jelly Bean.
- It is the only MTK6589 phone available to support 3G outside of 850/2100. Those frequencies are for the MTK6577, which does support those bands.
- CPU Model: Dual Core A7… Bit weird, isn’t it meant to be a quad core chip?
- Invalid GPU SGX531, which just happens to be the MTK6577 GPU. The MTK6589 chipset uses the SGX544. The chipset comes with CPU, GPU, and the modem all together you cannot chop and change them.
- Processor works on ~ 1.5Ghz. Every credible MTK6589 device (THL W8, Zopo, etc) is 1.2Ghz.
Can you verify this for videos on youtube ...
I sent the phone back to the seller.
Best regards,
onakvee said:
Hi friends!
Unfortunately, my concerns are justified....
- Linux kernel is only 3.0.13 is too low to run Android 4.1 let alone 4.2. You need a 3.4.0 kernel for Jelly Bean.
- It is the only MTK6589 phone available to support 3G outside of 850/2100. Those frequencies are for the MTK6577, which does support those bands.
- CPU Model: Dual Core A7… Bit weird, isn’t it meant to be a quad core chip?
- Invalid GPU SGX531, which just happens to be the MTK6577 GPU. The MTK6589 chipset uses the SGX544. The chipset comes with CPU, GPU, and the modem all together you cannot chop and change them.
- Processor works on ~ 1.5Ghz. Every credible MTK6589 device (THL W8, Zopo, etc) is 1.2Ghz.
Can you verify this for videos on youtube ...
I sent the phone back to the seller.
Best regards,
Click to expand...
Click to collapse
You bought a fake of a fake. There is NO MTK6589 in an iPhone fake available. I made a backup of such thing with MTKDroid, you can download it here:
http://www.filefactory.com/file/46rs1lht4uep/n/iPhone_130125_backup_130417-152744_zip
In fact you may bought a device with mtk6575 and 480 x 854 pixel.
dragon-tmd said:
You bought a fake of a fake. There is NO MTK6589 in an iPhone fake available. I made a backup of such thing with MTKDroid, you can download it here:
http://www.filefactory.com/file/46rs1lht4uep/n/iPhone_130125_backup_130417-152744_zip
In fact you may bought a device with mtk6575 and 480 x 854 pixel.
Click to expand...
Click to collapse
Hi,
thank you for your answer!
Also, I figured it out ...
I sent the phone back to the seller. I waiting for a refund...
Best regards!
dragon-tmd said:
You bought a fake of a fake. There is NO MTK6589 in an iPhone fake available. I made a backup of such thing with MTKDroid, you can download it here:
http://www.filefactory.com/file/46rs1lht4uep/n/iPhone_130125_backup_130417-152744_zip
In fact you may bought a device with mtk6575 and 480 x 854 pixel.
Click to expand...
Click to collapse
He has this http://www.fastcardtech.com/Goophone-i5-N2-V2 with MTK6577 and 854x480 screen.
Anyone know where I can get rom for goophone i5 n2 v2? thank you.
JankyLV said:
Anyone know where I can get rom for goophone i5 n2 v2? thank you.
Click to expand...
Click to collapse
Have you been here?
http://www.needrom.com/mobile/goophone-n2/
MayhemVC said:
Have you been here?
http://www.needrom.com/mobile/goophone-n2/
Click to expand...
Click to collapse
Yes, but it's not the same model.
For reference:
http://www.fastcardtech.com/Goophone-i5-N2-Lte
http://www.fastcardtech.com/Goophone-i5-N2-V2
I'm on the same boat. I bought a fake of a fake too. All I want is a rom for the Goophone i5 N2 V2 to see if the phones atleast any use..
Cheers
Dan
Someone please test asphalt 8 on qhd mtk6589 quad core phone on high graphic settings and tell me if it lags
I have bought android chinese mobile phone and I need someone to guide me on how to install custom ROM on it. I have been searching for the last 4 days on all websites that support chinese clone phones trying to find a ROM for my phone but I have realized that my phone is not a clone of any other phone, it is simply chinese android phone without any brand name or private fake brand names.
The phone has the following specs:
Fabricante: G+ Modelo: S6 Chipset: MTK6595, CPU: 2.5GHZ Architecture: ARM Cortex-A7 Oct-Core, Ram: 4MB, Memory: 16MB , Android:4.4.3 (with lots of chinese apps) - Obs.: Antutu
I can install custom recovery and root the phone, this is not a problem at all. The problem I'm facing is finding a ROM for my phone. So, What I need is, just a ROM that will work on my phone. Since my phone doesn't belong to any brand name!
Q- Can I just flash any ROM of those chinese ROMS that are available on the internet for MTK6595 without changing the current kernel on the phone? as I believe all chinese phones that run same MTK chipset number has the same interface and everything else!
Q- Is there a universal ROM that can just be installed on any device without touching the kernel (just like installing windows on your computer)?
In your reply, please make sure your reply is detailed and don't make me guess steps in between.
Thank you
Dears, Help needed urgently
last week i was in a business trip to china and i bought a box called T1Box , 8G ram and 64GB internal memory , when i got back to my country i found that t's a full Chinese box with kitkat 4.4.2 and there is no play store or any other apps , i managed to add apps by usb but play store didn't work and youtube also and what worked was only the shareit , i sent the play store and youtube on share it but it also didn't work , i tried to hard reset the box by the button on the av hole by pressing on it and unplug and plug the power but for sorry the box do not turn on while am pressing on it , i installed an app called cpuz and found that it's not rooted , so can any one help me here installing playstore and apps or resetting the box to the original or how to root it and install another android version , here are some info attached from the box , hope you can help me here
proccessor 8X ARM Cortex-A7 @ 1.01 GHZ
GPU Mali-400
T1BOX ( Dolphin-FVd-p2)
manufacturer Allwinner
hardware sun 8i
Board Exdroid
root access No
Java VM Dalvik1.6.0
Kernel armv7l
kernel version 3.4.39 (20181217)
thanks alot in advance
now i flashed a wrong rom and the power do not come up can any one provide me with stock rom for allwinner h2+ ?
Rooting Allwinner H3 TVBOX
try this image
https://mega.nz/file/GMh2TaqS#gUYrsvsLIH2WqVPe08lQrU_kBzpgTMAXFXIvdtM0knA
it comes with android 7.0
but it is unrooted. I need help to gain root access to it. Thanks
you can also try this image:
https://mega.nz/file/qUpgzSbZ#MXC5ZH9Md0S3-jXEWdVrYdMo_KqyW2Tl1aZOGmBZvQg
it is rooted but with android 4.x.x