TCP View for Android - Android Q&A, Help & Troubleshooting

Hello! I want to know if there is any app which works like TCPView by Sysinternals for Windows.
I simply want to disconnect active data connections, no matter if wifi or mobile data.
Does such a tool exists?
Edit: i found tools like net tools withhin i can show but dont close active connections.
Also alogcat seems to only show data connections.
Sent from my SGSIII using my Keyboard

redplate said:
Hello! I want to know if there is any app which works like TCPView by Sysinternals for Windows.
I simply want to disconnect active data connections, no matter if wifi or mobile data.
Does such a tool exists?
Edit: i found tools like net tools withhin i can show but dont close active connections.
Also alogcat seems to only show data connections.
Click to expand...
Click to collapse
I'd recommend some firewall app. Just closing a connection will not hinder the app to re-open it again. Using a firewall app, you can make sure the connection stays closed.
The shell command netstat shows active connections.

Thank you. Im alrdy using avast fw with whitelist mode and it works as it should.
I was asking because some apps dont start until they got an internet connection (even if they dont need one) or it takes rly long till connection times out so they can start.
So i thoight i could block them going online and disconnect the pending connection which is -listening- to some port and waiting for connection.
Sent from my GT-I9300 using Tapatalk 2

Related

GPRS shortcuts

My work has a GPRS connection through O2 and we had to setup some manual settings (which was a nightmare!!) to make this work. However, we can still surf the net if we connect to O2 GPRS.
So in summary, we have 2 GPRS connections. 1 for O2 which is used for surfing the net, and 1 for the company I work for (let's call them XDA plc for legal reasons....).
You might ask that why don't we just have 1 connection because we receive emails and check network stuff through the XDA plc connection but we can't surf the net using this one, so this is why we have the O2 connection as well. Everyone following this.
So to jump between the connections involves a long way for a shortcut by using the Settings-Connections-Connections icon and changing the settings. I noticed under Program-GPRS Connections there are various shortcuts. So after all this drivel.... here is the question.
Does anyone know how to make a new shortcut which I could apply our personal settings to?
Much Appreciated
Keith
No for a lie down.... phew :?
So, if I got your correctly, you have a secured GPRS connection to the XDA plc that doesn't allow access to the internet for security reason, and another normal GPRS connection to surf the internet ... right ?
Ok, this is a typical setup for highly secured LANs to reduce the possibility of virus attacks.
My advice is to check with your network administrator the possibility to add a firewall on a proxy server in your LAN to allow you to surf the internet (I 'm sure it came to their mind but they know better than me of course )
Or, you can setup the normal connectivity on your XDA to access the internet through O2, and set the xda plc GPRS connection to the "Work" connection and adjust your network application on the XDA to use this connection instead of the normal one.
So, if I got your correctly, you have a secured GPRS connection to the XDA plc that doesn't allow access to the internet for security reason, and another normal GPRS connection to surf the internet ... right ?
Why couldn't I have put it like that............... Yes
Or, you can setup the normal connectivity on your XDA to access the internet through O2, and set the xda plc GPRS connection to the "Work" connection and adjust your network application on the XDA to use this connection instead of the normal one.
I'm afraid it is the 'Or' as our IT guys cringe at the thought we even have an XDA....
There are 3 selections that you can make in the Connections (under settings) window.
1. When needed, automatically connect to The Internet using these settings:
2. When needed, automatically connect to Work using these settings:
3. My network card connect to:
1 is Work Settings
2 is Work Settings
3 is Work
The Work Settings have the secure GPRS settings (XDA plc).
I would have thought that I could have selected:
1. Internet Settings
2. Work Settings
3. Work
But when I use Active sync it will try to connect to O2 instead of XDA plc. It's the same when using IE. It will connect to XDA plc if 1,2 & 3 are set to Work. I've tried various other combinations to no avail.
My thinking was that if I could create a shortcut, like in Programs-GPRS Connections, then I could jump between the 2 without going through a long process.
Cheers
But when I use Active sync it will try to connect to O2 instead of XDA plc. It's the same when using IE. It will connect to XDA plc if 1,2 & 3 are set to Work.
Click to expand...
Click to collapse
oh, i think i got ur point. up to my info, internet settings will be used whenever the device is connected 'wirelessly' .. if ur exchange server is in the xda plc LAN, then activesync will use the internet settings ... and Work settings is used whenever the xda is in the cradle ... IE will use it only if the 'pass through' option is checked and there is a proxy to the internet.
you should create another 'connection' under internet settings but using the access point of xda plc ... u will still have to select the proper 'modem' under internet settings manually
leave the work settings empty and it will be auto configured if u sync with ur exchange server from the cradle
you should create another 'connection' under internet settings but using the access point of xda plc ... u will still have to select the proper 'modem' under internet settings manually
Click to expand...
Click to collapse
Does that not defeat the point though? If the work settings are already setup, I'm as well selecting between that and Internet settings instead of jumping further into the settings?
I thought there might be someway to create a shortcut in Programs-GPRS Connections therefore I could get these shortcuts to the today screen and then select whichever one I need.
If you use WM2003 you can click the connection strength symbol in the header to connect and disconnect to the different services. They should both be listed in the bubble that pops up.
oh, i think i got ur point. up to my info, internet settings will be used whenever the device is connected 'wirelessly' .. if ur exchange server is in the xda plc LAN, then activesync will use the internet settings ... and Work settings is used whenever the xda is in the cradle ... IE will use it only if the 'pass through' option is checked and there is a proxy to the internet.
Click to expand...
Click to collapse
I think what your problem is that you are using a server name on your corporate LAN that has full-stops in it. These are interpreted by the XDA as an internet address, and therefore the Internet connection is used.
What you need to do to get around this is to put in some exceptions.
Go into Settings -> Connections -> Advanced -> Select Networks
Then click on the exeptions button, and click on Add URL
Then put in the name of your server (or the domains that your company uses). Good examples are:-
*.xda.com
mailserver.xda.com
That should sort it for you, so you can then set the Internet to connect to the Internet, and Work to connect to Work.
I think what your problem is that you are using a server name on your corporate LAN that has full-stops in it. These are interpreted by the XDA as an internet address, and therefore the Internet connection is used.
Click to expand...
Click to collapse
But I can't use the XDA plc to access the Internet and I can't use O2 Mobile Web to access XDA plc for email, etc.
Interesting point though but I can't think where this si useful unless I've missed your point.
The only solution I can see is to create these shortcuts which no-one, so far, seems to know how to do.
Thanks for all your help so far,
cheers
keith :wink:
Would this help?
http://pdaphonehome.com/forums/showthread.php?s=&threadid=4958
Interesting point though but I can't think where this si useful unless I've missed your point.
Click to expand...
Click to collapse
Sorry - I think you have missed my point.
You have two connections - the Internet and Work.
Work is normally used for any Corporate LAN type stuff, and the Internet for everything else.
The XDA decides that you need to connect to and use Internet if the address contains full-stops (i.e. URLs like http://www.abc.com). If it doesn't, then the Work setting is used.
I think the problem is that your work server is setup as something like email.abc.com, so the XDA decides that this is an internet address and uses the Internet connection settings.
What I do is setup O2 Mobile Web as my Internet connection, and my corporate LAN as the Work connection. Then, I add into the exceptions list the name of my corporate LAN email server (email.abc.com, or even *.abc.com). This tells the XDA that when using the address email.abc.com to use the Work settings instead of the Internet settings and hey-presto it sorts itself out!
The only challenge then comes when, like me, you have a 3rd connection (WAP/MMS), at which point you do have to manually choose between which Internet connection setting to use, but for just the 2 it works fine.
Hope this helps!
Would this help?
http://pdaphonehome.com/forums/showthread.php?s=&threadid=4958
Click to expand...
Click to collapse
I took a look and this could be one of the answers I'm looking for however,,,,
Go into Settings -> Connections -> Advanced -> Select Networks
Then click on the exeptions button, and click on Add URL
Click to expand...
Click to collapse
Now I understand where you are going with this. But I can only select the following menu:
Settings -> Connections
There is no advanced menu.
Can you point me in the right direction?
Cheers
cant recall if it's the same with 2002 if you are using that, that is
start button
choose settings
choose the tab called connections
click the icon called connections
choose the tab called advanced
it's in the buttom of the dialog in the connections dialog
it's in the buttom of the dialog in the connections dialog
Click to expand...
Click to collapse
uh oh... there's no tab for advanced, just dialling locations and connections.
Maybe it would have helped if I had mentioned Pocket PC 2002.. Sorry.
Anyone else know where this menu may be?
Cheers
Keith
i think you see the stuff in the normal dialog in menu
it's where you choose what network you are on
as in <gprs>
or <wap> og <mms>
or <Wifi> or <Usb Lan using ActiveSync passthough>
or ............
those you dont see but need you will have to make yourself
much in the same way as you manualy set up grps
you then just choose the one you want to use at a given time and
thats pretty much it really
you then just choose the one you want to use at a given time and
thats pretty much it really
Click to expand...
Click to collapse
I would have hoped that the advanced menu would either be somewhere else on PPC2002 or at least be called something else. It appears that there is no easy answer to this.
This is really the crux of the problem where I have to keep going to Settings/Connection/Connections and changing everything back and forth.
What I have noticed about using the GPRS connection shortcuts, progrma/gprs connections, is that they change all the settings over automatically which means I have to change them back. So if it can do this then we must be able to create a shortcut which will change them back. Where this info is kept, I don't know.
it's pretty much the same situation you are facing if you are using a laptop with a modem and lan and have to change between them
maybe you can look for some 3th party software
sppda said:
enu would either be somewhere else on PPC2002 or at least be called something else. It appears that there is no easy answer to this.
Click to expand...
Click to collapse
What you're looking for is there in WM2003.
If an upgrade to 2003 is not an option you might want to give SPBs GPRS Monitor a try. I think it will let you connect/disconnect to different networks from the popup that is shown when you klick the connection icon in the task bar.
Download a trial at:
http://www.spbsoftwarehouse.com/products/gprsmonitor/?en
I've downloaded this software and I'll give it a try. Looks like good quality software too. Anyone tried the Today plug-in? versus other today plugins?
How do you upgrade to WM2003? Is it like a PC OS where you purchase the OS and install it? Sorry for newbie question....
After much serching and trialling I eventually forund RasMan software which provides the dial in switching that I need.
Now I can leave all the settings for my companies GPRS (so I can Activesync) and by using RasMan, I can dial up the O2 Mobile Web and surf to my hearts content.
Knew I would get there in the end.......
Cheers

[ISSUE] How to prefer Wi-Fi to 3G

I have a HTC Fuze. The last few ROMS that i have been using (Energy, RRE, Tael), all the Apps always use the 3G internet to do their work even if a much faster Wifi is connected. Is there any way to make all apps(including things like email) globally prefer the Wifi when available? Also I dont want to have to keep changing settings to do this, It simply needs to be "If Wifi available use it, else use 3G"
Thanks in advance.
What i did was to go to start>settings>connections>advanced>select networks and change the default connection to the internet to "My work network", rather than my 3G network. This way, if theres any connection to the internet needed, my phone will use my wifi connection. The problem with this, however, is that when you dont have a wifi connection available, the phone will not connect to the internet unless you change the above setting back to your 3G network. If anyone knows a better way, please let us know
no i cant keep switching. thats too much trouble. there must be a better way.
redskilldough said:
What i did was to go to start>settings>connections>advanced>select networks and change the default connection to the internet to "My work network", rather than my 3G network. This way, if theres any connection to the internet needed, my phone will use my wifi connection. The problem with this, however, is that when you dont have a wifi connection available, the phone will not connect to the internet unless you change the above setting back to your 3G network...
Click to expand...
Click to collapse
Does it automatically connect to WiFi when a known network is within range even when the phone is in sleep? If yes, does it disconnect once not in use for a while?
k.electron said:
no i cant keep switching. thats too much trouble. there must be a better way.
Click to expand...
Click to collapse
As far as I know there is no way to do it automatically. You can use one or the other but they must be switched manually. All HTC phones have always worked this way. Maybe if the demand was high enough which apparently it is not a Chef could come up with an app that would do it. But for now you must do it manually.
rexian said:
Does it automatically connect to WiFi when a known network is within range even when the phone is in sleep? If yes, does it disconnect once not in use for a while?
Click to expand...
Click to collapse
no i leave wifi off normally to conserve battery.
Solarenemy68 said:
As far as I know there is no way to do it automatically. You can use one or the other but they must be switched manually. All HTC phones have always worked this way. Maybe if the demand was high enough which apparently it is not a Chef could come up with an app that would do it. But for now you must do it manually.
Click to expand...
Click to collapse
that is extremely failurous. not preferring the fastest internet connection is major fail. did not know that.
My phone does this automatically. It uses the WiFi whenever it's on. If the WiFi is off, it uses the data connection.
Maybe I'm understanding it wrong?
|Jason8| said:
My phone does this automatically. It uses the WiFi whenever it's on. If the WiFi is off, it uses the data connection.
Maybe I'm understanding it wrong?
Click to expand...
Click to collapse
what the heck? how? u must help me find out..
i think it does prefer wifi over 3g in WM 6.5...!!
to check it out here is wt i've done....turn data connection off...check that its on in the notification manager "when u click on the task bar"..then run any app that needs internet " opera, msn messenger, email...etc" while this app is online..
now there r two ways to check it
1-the notification manager & see if it turned to 3g data connection...if so u should find a timer running in ur service provider section, if not then its only using wifi
2-check the communication manager & see if it turned the data connection on, if its off then its using wifi...
thats how it is with my touch pro...i'm using energy rom nov. 08 build
Indeed it prefers wifi connections 2 data, but You have to :
1. Have Known wifi spots in range
2. Keep wifi connection on, while in stand by
Keep in mind that if a program starts to use the data connection it wont change to use the wifi one. So firstly connect and then open programs.
wakady said:
i think it does prefer wifi over 3g in WM 6.5...!!
to check it out here is wt i've done....turn data connection off...check that its on in the notification manager "when u click on the task bar"..then run any app that needs internet " opera, msn messenger, email...etc" while this app is online..
now there r two ways to check it
1-the notification manager & see if it turned to 3g data connection...if so u should find a timer running in ur service provider section, if not then its only using wifi
2-check the communication manager & see if it turned the data connection on, if its off then its using wifi...
thats how it is with my touch pro...i'm using energy rom nov. 08 build
Click to expand...
Click to collapse
firiel said:
Indeed it prefers wifi connections 2 data, but You have to :
1. Have Known wifi spots in range
2. Keep wifi connection on, while in stand by
Keep in mind that if a program starts to use the data connection it wont change to use the wifi one. So firstly connect and then open programs.
Click to expand...
Click to collapse
apparently its some sort of combo of this. i am using 6.5. any apps that have been using 3g continue with it. and i have to go to the comm screen and turn off data to force new apps to consume wifi. which isnt too bad, certainly not as bad as going to the network options. i would wish they made this a bit more seamless like with the desktop technology, i can switch from wired to wireless lan without even dropping a skype call.
firiel said:
Indeed it prefers wifi connections 2 data, but You have to :
1. Have Known wifi spots in range
2. Keep wifi connection on, while in stand by
Keep in mind that if a program starts to use the data connection it wont change to use the wifi one. So firstly connect and then open programs.
Click to expand...
Click to collapse
now i have discovered a new problem. even if i open the app after i have wifi turned on and data turned off, some apps just dont want to use the wifii.
Bing maps and google maps for example just tell me there is no internet.
this is really pissing me off, whats the point of having wifi on a phone if the apps wont use it. i dont really care about the google location service if the data is through the internet, but atleast turn on.
lame.

Wireless Tether

I've never used wireless tether on my phone, but recently tried to. I'm running the Lightning Bolt 2.7 rom and I'm using Wireless Tether for Root Users. I hit "press to start tethering" and everything seems fine. I'm granted SU permission and it displays "press to stop tethering" which leads me to believe that the program is working correctly. I have 3G connection but I'm getting 0.0kb down and up and I'm unable to discover my Eris with any other device (my wife's Eris, PC, or laptop). Am I doing something wrong?
Install another wifi tethering program? Make sure you're using wifi tethering and not usb tethering...
Hungry Man said:
Install another wifi tethering program? Make sure you're using wifi tethering and not usb tethering...
Click to expand...
Click to collapse
I think I've tried every free wifi tether app in exsistence. I've heard tetherWifi works but I don't want to pay $9 to test it...wish they'd let you try b4 you buy.
Stupid question, but do you have wifi turned on?
If so, there is an option in the settings of wireless tether app that's called enable access-control. If this is checked then you have to grant priviledges to the devices that you wish to connect to your phone. You will have to slide the notifications window down and then select the notification about some device that is trying to connect to your phones wifi. After you select that notification you must grant the priviledge before it will work.
Good Luck!!
geske001 said:
Stupid question, but do you have wifi turned on?
If so, there is an option in the settings of wireless tether app that's called enable access-control. If this is checked then you have to grant priviledges to the devices that you wish to connect to your phone. You will have to slide the notifications window down and then select the notification about some device that is trying to connect to your phones wifi. After you select that notification you must grant the priviledge before it will work.
Good Luck!!
Click to expand...
Click to collapse
I had my wifi turned off but I've tried turning it on and off. I enabled access-control, disabled it, turned bluetooth PAN tether on and off, and I've changed the settings to each of the different LAN network settings. Each time I return to the main page I'm seeing 0.0kB down and up. When I scan for wifi connections with my wife's phone, it never sees my Eris. I've even tried manually adding the wifi network on her phone by entering "AndroidTether" manually as the SSID which is what my phone says the SSID is. It adds it to her wifi networks but says that it is "Not in range, remembered".
Question - When you turn on Wireless Tether, before you connect any devices to it, does your phone display any kB going down or up? Or do you have to actually connect to a device to start pushing a signal?
You might need to start over. Do not mess with anything other than changing your SSID and enabling Access control. Do not use bluetooth for confusion reasons. When you connect with your wireless laptop watch for the access request, slide your notifications and then accept your device. You should be ok. Do not try to complicate things. Just KISS!!
PM me if you have any other questions!
That's my problem. I can't get other devices to even attempt to connect to my phone. The only notification I ever see is "tethering is currently running". I get superuser permission whenever I turn on tethering or change any settings that require it to restart tethering. But I never get any kB down or up and no other device ever recognizes the wifi connection.
Whenever I get an access control notification, it DOES NOT pop up. It is displayed subtly at the top of the phone and I have to slide my finger from the very top of the screen down to the bottom, and then the notification menu fully comes up. I then click the access control notification and check the device that is trying to access wifi through my phone. You have to pay close attention.
You could try to click on the menu button by your home button and select access control, and see if anything tries to attach. You will need to check the box for the device and then accept.
Good Luck!
geske001 said:
Whenever I get an access control notification, it DOES NOT pop up. It is displayed subtly at the top of the phone and I have to slide my finger from the very top of the screen down to the bottom, and then the notification menu fully comes up. I then click the access control notification and check the device that is trying to access wifi through my phone. You have to pay close attention.
You could try to click on the menu button by your home button and select access control, and see if anything tries to attach. You will need to check the box for the device and then accept.
Good Luck!
Click to expand...
Click to collapse
I understand that I have to view my notifications to see the notification. But there is never one there. No device sees a wifi signal because the phone isn't pushing one. It's my understanding that the app should be pushing a wifi signal that other devices can see and try to connect to. When I'm on my laptop or my wife's phone and I scan for a wifi network I DO NOT see my phone and therefore the device does not attempt to connect to my phone (and there is not a notification if I slide my finger down at the top of my phone to allow a connection).
The question I have is: when you begin tethering (BEFORE ANY DEVICE HAS CONNECTED OR ATTEMPTED TO) do you have kb's going down or up? Someone answering this simple question would help me tremendously!
Thanks!
Sent from my FroyoEris using XDA App
To answer your question, no. if nothing is connected to the tether then the connection has no need to upload or download info.
MJL99 said:
To answer your question, no. if nothing is connected to the tether then the connection has no need to upload or download info.
Click to expand...
Click to collapse
Ok, thanx. That means my probem lies in the connection, not the actual tethering.
Sent from my FroyoEris using XDA App
joshw0000 said:
Ok, thanx. That means my probem lies in the connection, not the actual tethering.
Sent from my FroyoEris using XDA App
Click to expand...
Click to collapse
What version are you running? I'm not running a froyo rom so I havent been up to date on what works and what doesnt, but have you looked thru all the froyo rom threads to see if anyone else has had a tether problem? On aloysius, I have version 1.6 and it works fine, get info transfer up and down after I connect with my laptop. If you have access control enabled, you will need to authorize your device that is connected, if you can find it in wireless networks.
Is wireless tether bundled with the rom? You said you have tried all versions that you could find but I still have a feeling its the version of wireless tether you have, but it could also be that all versions you found are only compatible with 2.1.
Heres all I could find:
Wireless Tether
I'm on KaosFroyo v24. So I tried opening wireless tether and running it. I started it and did a wifi scan on my wife's phone. Still nothing. I got on the laptop and ran about a half dozen scans and it finally saw and connected to my phone, at which point data was streaming up and down. I had just assumed before since no data was streaming and I couldn't connect initially that something was wrong.
I still can't connect with my wife's phone (which was what I used most for testing) but I got it working.
Thanks to everyone for your help!!!
Sent from my FroyoEris using XDA App

Allshare and my firewall

Cant get allshare to work, tried every way possible. Only thing I can think of is some sort of setting with my wireless router, firewall maybe. I have a belkin wireless n router, what settings should I be looking at when I log into the router?
Edit: fixed issue, it was windows firewall
What programs should i grant access?
I use Eset Smart Security, and if i make an exception for WMP it is not enough, but if i temporary disable the fire, everithing works perfect, but i cant leave firewall off.
hadesz said:
What programs should i grant access?
I use Eset Smart Security, and if i make an exception for WMP it is not enough, but if i temporary disable the fire, everithing works perfect, but i cant leave firewall off.
Click to expand...
Click to collapse
I strongly don't suggest disabling your firewall, however, if you really want to use Allshare and your firewall doesn't allow it, I would assume there's an option to allow certain programs through, so I guess you're stuck with testing which programs to let through...
if ur using windows u need to have windows media, player open for allshare to even recognize your computer.
Then somewhere in media player theres a option which lets your computer ask or always allow then it'll start working
If not then idk
Sent from my SGH-T959 using XDA App
well how did you fix the problem.
have the same exact problem. how did you solve it?
Bronk93 said:
Cant get allshare to work, tried every way possible. Only thing I can think of is some sort of setting with my wireless router, firewall maybe. I have a belkin wireless n router, what settings should I be looking at when I log into the router?
Edit: fixed issue, it was windows firewall
Click to expand...
Click to collapse

[Q] Tethering with rooted ICS phone

I have searched extensively on Google, and XDA but can't find the right answer.
I want to tether my phone. I can do this directly in Android but my current carrier brings up a message in the browser saying it's not supported on my current plan.
I'm addressing this, but in the mean time I'm curious if there is a way round it, hypothetically.
I have seen some Apps, such as ClockWork Mod Tether, but since my phone is rooted I wondered if there is a more elegant solution that doesn't involve any software to be added to my PC.
I read about using TB to freeze a specific App/Process but couldn't find any details.
Any advice would be great,
thanks
helppme said:
I have searched extensively on Google, and XDA but can't find the right answer.
I want to tether my phone. I can do this directly in Android but my current carrier brings up a message in the browser saying it's not supported on my current plan.
I'm addressing this, but in the mean time I'm curious if there is a way round it, hypothetically.
I have seen some Apps, such as ClockWork Mod Tether, but since my phone is rooted I wondered if there is a more elegant solution that doesn't involve any software to be added to my PC.
I read about using TB to freeze a specific App/Process but couldn't find any details.
Any advice would be great,
thanks
Click to expand...
Click to collapse
HOW have you not heard of android wifi tether? One of the first reasons I had for rooting the first Android phone I got.
There's also Barnacle Tether, available on the play store.
Guess Barnacle is gone... but there are other tethering apps on the play store though.
And I'm wrong again. Barnacle is still there, but doesn't show up when I search from my phone. How curious.
Since your phone is rooted you can download wireless tether.
Google it and you will easily find the download link or even directly via the play store.
Sent from my GT-I9100 using xda premium
ctomgee said:
HOW have you not heard of android wifi tether? One of the first reasons I had for rooting the first Android phone I got.
There's also Barnacle Tether, available on the play store.
Guess Barnacle is gone... but there are other tethering apps on the play store though.
And I'm wrong again. Barnacle is still there, but doesn't show up when I search from my phone. How curious.
Click to expand...
Click to collapse
I appreciate the reply, but if you read my post again the issue I'm having is not an app to enable wifi tether directly on the handset, it's that the packet data is being detected as not from the phone so I get a message, on the computer, in the internet browser saying my priceplan doesn't include tethering. I cant get around this 3 website redirect. So, I need a way to tether, without the network knowing... The apps you mention work when the block is at the phone level I believe.... This is something different Three is doing..
Please correct me if I'm wrong though...
Oh, and as for the apps not showing up, the mobile phone providers asked google to block these apps for certain customers.. if you connect to a wifi network when in flight mode, and go the google market, you should still be able to see them...
panoramixmeister said:
Since your phone is rooted you can download wireless tether.
Google it and you will easily find the download link or even directly via the play store.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
same issue, this app doesnt get around they way three is detecting tether usage :-(
helppme said:
I appreciate the reply, but if you read my post again the issue I'm having is not an app to enable wifi tether directly on the handset, it's that the packet data is being detected as not from the phone so I get a message, on the computer, in the internet browser saying my priceplan doesn't include tethering. I cant get around this 3 website redirect. So, I need a way to tether, without the network knowing... The apps you mention work when the block is at the phone level I believe.... This is something different Three is doing..
Please correct me if I'm wrong though...
Oh, and as for the apps not showing up, the mobile phone providers asked google to block these apps for certain customers.. if you connect to a wifi network when in flight mode, and go the google market, you should still be able to see them...
Click to expand...
Click to collapse
I WAS on wifi.
And did you ACTUALLY download the tether app and try, or were you using the tether built into the settings of Android? Because it sure doesn't sound like you downloaded the app...
And I don't have tethering on my carrier plan, but the tether app works just fine for me.
ctomgee said:
I WAS on wifi.
And did you ACTUALLY download the tether app and try, or were you using the tether built into the settings of Android? Because it sure doesn't sound like you downloaded the app...
And I don't have tethering on my carrier plan, but the tether app works just fine for me.
Click to expand...
Click to collapse
Initially when I first posted I was trying the built in app but I downloaded the app you suggested anyway, but it didn't work. would connect to the computer but no data connection. Unsure if its an app problem or still a three problem, but I don't see how this app would fix the three problem. Does it somehow mask the PC data connection??? I couldn't see anything in the settings or set up that suggest that it would, it just looks like a more feature rich wifi hotspot app?? In addition I found mention that that others with my issue have also tried these apps like barnacle and it didn;t resolve the problem....
helppme said:
I have searched extensively on Google, and XDA but can't find the right answer.
I want to tether my phone. I can do this directly in Android but my current carrier brings up a message in the browser saying it's not supported on my current plan.
I'm addressing this, but in the mean time I'm curious if there is a way round it, hypothetically.
I have seen some Apps, such as ClockWork Mod Tether, but since my phone is rooted I wondered if there is a more elegant solution that doesn't involve any software to be added to my PC.
I read about using TB to freeze a specific App/Process but couldn't find any details.
Any advice would be great,
thanks
Click to expand...
Click to collapse
They can suspend your service if they discover you are doing tethering on your device if you are not alowed in your current plan.
I Hope you wont have any issues.
Otherwise it is possible that the sim card lock the feature even on rooted phone when detect thetering or it is impossible ?
jsmasterx said:
They can suspend your service if they discover you are doing tethering on your device if you are not alowed in your current plan.
I Hope you wont have any issues.
Otherwise it is possible that the sim card lock the feature even on rooted phone when detect thetering or it is impossible ?
Click to expand...
Click to collapse
yes I suppose they could do, but like I say I'm resolving this with my contract. It's more that I'm curious how they are doing it, and on principle don't like being told what I can and can't do
It can't be a sim lock.
I just tried tethering a Macbook, and amazingly that worked!.. SO, It must be something to do with the Packet Headers I'm guessing.. Or they are doing some other more detailed packet sniffing... It means there is definitely a software route around it... Need a clever developer to read this thread
I guess clockworkMod Tether might work, but I want a solution without a PC install..
helppme said:
yes I suppose they could do, but like I say I'm resolving this with my contract. It's more that I'm curious how they are doing it, and on principle don't like being told what I can and can't do
It can't be a sim lock.
I just tried tethering a Macbook, and amazingly that worked!.. SO, It must be something to do with the Packet Headers I'm guessing.. Or they are doing some other more detailed packet sniffing... It means there is definitely a software route around it... Need a clever developer to read this thread
I guess clockworkMod Tether might work, but I want a solution without a PC install..
Click to expand...
Click to collapse
That doesn't make any sense. If it works with a mac book, it should work with your windows machine too. Unless your windows machine has some kind of proxy?
ctomgee said:
That doesn't make any sense. If it works with a mac book, it should work with your windows machine too. Unless your windows machine has some kind of proxy?
Click to expand...
Click to collapse
no proxy.. I'm as confused as you. The headers are different on a mac though, Unix based system... Need to know how 3 detect at a network level its not phone data... this difference with a mac must be a clue...
pda net 3.50. Had to install pc software.. Is a USB tether solution.. but it works, so will do, until I get my price plan sorted.... Still would like a more elegant wifi solution though.. Come on you clever devs, .... SCRATCH that :-(((( It worked for 5 mins, now it comes up with same message in the internet Browser.. damn it!!! three are too smart :-(
helppme said:
pda net 3.50. Had to install pc software.. Is a USB tether solution.. but it works, so will do, until I get my price plan sorted.... Still would like a more elegant wifi solution though.. Come on you clever devs, .... SCRATCH that :-(((( It worked for 5 mins, now it comes up with same message in the internet Browser.. damn it!!! three are too smart :-(
Click to expand...
Click to collapse
Try proxoid.
ctomgee said:
Try proxoid.
Click to expand...
Click to collapse
They are blocking the port 80.. they sent you to their walled garden page. I think its on your provider proxy side now
Sent from my GT-I9100 using Tapatalk
jsmasterx said:
They are blocking the port 80.. they sent you to their walled garden page. I think its on your provider proxy side now
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Is there a way around this. What do you mean by, on the provider proxy side?
Shortly after PDA net stopped working, I was also getting the three message on the browser directly on my phone.. after about an hour, my phone web browser started working normall again :-(
helppme said:
Is there a way around this. What do you mean by, on the provider proxy side?
Shortly after PDA net stopped working, I was also getting the three message on the browser directly on my phone.. after about an hour, my phone web browser started working normall again :-(
Click to expand...
Click to collapse
When you use thetering, you embark to the provider internet network.
for example my provider is Bell Canada and their proxy is web.wireless.bell.ca
this one is for the device internet
for the thetering one they use another configuration settings when i connect my device to the computer.
What happen is when you plug your device to the computer, a signal is sent to the provider stating you entered in thetering mode. You don't have access to thetering so your internet connection is limited to the walled garden of the provider stating you are not subscrided to the service. Thats why i think they blocked the port 80 on your device and redirect you to that page.
Now for the Macintosh story.. It is not impossible that you can connect without problem with a mac and safari. I know a lot of people emulating a handled device with the Mac and the safari browser and those peeps didnt had a thetering plan.
The differences came with the drivers installed. Mac OS one are quite different in term of functionality than windows, thats why maybe the provider is able to sniff more easily people using windows but i am not a senior programmer. I am currently taking courses to become one but for now it is only suppositions. If i am wrong feel free to correct me but I am quite sure about what i am saying and that's why you dont have issues with a mac
jsmasterx said:
When you use thetering, you embark to the provider internet network.
for example my provider is Bell Canada and their proxy is web.wireless.bell.ca
this one is for the device internet
for the thetering one they use another configuration settings when i connect my device to the computer.
What happen is when you plug your device to the computer, a signal is sent to the provider stating you entered in thetering mode. You don't have access to thetering so your internet connection is limited to the walled garden of the provider stating you are not subscrided to the service. Thats why i think they blocked the port 80 on your device and redirect you to that page.
Now for the Macintosh story.. It is not impossible that you can connect without problem with a mac and safari. I know a lot of people emulating a handled device with the Mac and the safari browser and those peeps didnt had a thetering plan.
The differences came with the drivers installed. Mac OS one are quite different in term of functionality than windows, thats why maybe the provider is able to sniff more easily people using windows but i am not a senior programmer. I am currently taking courses to become one but for now it is only suppositions. If i am wrong feel free to correct me but I am quite sure about what i am saying and that's why you dont have issues with a mac
Click to expand...
Click to collapse
This sounds correct to me. I'm pretty annoyed though. Only had the contract a month, I was told I could move onto a more expensive plan within contract if I needed more allowance etc.. Phone up 3, not only do they not let you PAY MORE for a different plan, but they also don't let anyone shift onto the one plan ever, unless its a new contract.. So basically **** them... so even if I want to pay extra for tethering I can't... absolute nonsense...
I had the same issue with three. I downloaded masqued crusader from play store. Activated it and then started wireless/usb tether. It worked. That was a while back tho. On a payg sim card on a galaxy s on gb. Its worth a try though.
Sent from my GT-I9100 using XDA

Categories

Resources