Hi guys,
I have an S2 which I installed JB v5.. On to and all seemed OK except I had an issue with the screen going blank during calls. I posted a ? On the forum and some suggested Siyah Kernel which I downloaded to solve the prob......... Prob now is when ever I reboot it comes up with System UI has stopped. This in itself isn't a real issue because I can use CWM and reboot back to original back up of ICS.
My question is why would this be happening, is it a matter of just trying another Kernel (to solve my original prob of the blank screen)
I would like to keep Siyah and use JB if possible as they appear good but I am very new to all this so any suggestions are appreciated
Thanks
JB = JellyBam..? Which version of Siyah did you try? It's important you flash the right one Look at the changelog on www.gokhanmoral.com.
Sent from the Matrix
In the CWM try to wipe dalvik, wipe cache, file permission,wipe factory reset. then restart again
rapnix said:
In the CWM try to wipe dalvik, wipe cache, file permission,wipe factory reset. then restart again
Click to expand...
Click to collapse
Why do a factory reset if it's just a kernel/flash-issue? It seems he just flashed the wrong version.
Sent from the Matrix
Phone stats
Thanks for the replays
Phone stats
kernel -3.0.31-Siyah-S2-v5.0.1+
android Version-4.0.4
Let me know if you need any more info
I was pretty sure I'd only downloaded the correct stuff but it was late at night
Thanks
Phone Stats
Thanks for the replays
Phone stats
kernel -3.0.31-Siyah-S2-v5.0.1+CWM
android Version-4.0.4
jB-jelly Bam-5.2.0_i9100Stable
CWM-SuperSU -v0.99
Let me know if you need any more info
I was pretty sure I'd only downloaded the correct stuff but it was late at night
Thanks
Morieson said:
Thanks for the replays
Phone stats
kernel -3.0.31-Siyah-S2-v5.0.1+CWM
android Version-4.0.4
jB-jelly Bam-5.2.0_i9100Stable
CWM-SuperSU -v0.99
Let me know if you need any more info
I was pretty sure I'd only downloaded the correct stuff but it was late at night
Thanks
Click to expand...
Click to collapse
Try kernel v4 instead. If you still have issues you will need to wipe data/factory reset. You can backup everything via Titanium Backup Pro.
If you still have issues you will need to use a kernel/rom cleaning script like these. Once you have cleaned rom/kernel of old leftover files you can do a fresh install of rom then kernel.
Related
hey guys i hope i put this in the right section... anyways, i was using cm7.1 stable on my fascinate with the stock kernel that came with it, which was awesome i must say. but recently i decided to try out the glitch kernel 13.1 as ive heard its even faster and overclocks better. and it is lol, its reallllll freakin fast but now my wifi wont work. worked perfectly on the other kernel but now when i hit the button to turn on the wifi, nothing happens, it kinda lights up and just stays there and wifi never turns on. does anyone have any work arounds for this? i really want to keep this kernel because its damn stable and fast but wifi is my only issue.
thanks guys
toggle airplaine mode off/on
Make a Nandroid, the wipe data. (restore the Nandroid if it doesn't work) I had this problem on my Iconia Tab after I did a dirty flash.
am I reflashing the kernel or cm7? I tried to airplane mode toggle and it just says error when I try to enable wifi in the settings menu
Don't reflash anything, just wipe data & dalvik.
did nandroid backup and cleared dalvik and did factory wipe, still no dice. am i missing something? did i get a corrupted kernel install file or something?
username8611 said:
did nandroid backup and cleared dalvik and did factory wipe, still no dice. am i missing something? did i get a corrupted kernel install file or something?
Click to expand...
Click to collapse
I've seen this before... I only have a minute to type this. There is a kernel cleaning script you can get.. by lippol I believe. Sorry to send you on the hunt. If that don't work, backup all your apps/data and do a full wipe (just wipe, not flash) on the phone and reflash kernel.
-Maniac
what does a kernel cleaning script do? theres an option to clean the kernel in the glitch kernel, is that the same? ive reflashed the glitch kernel too after reclearing dalvik and factory reset and still no wifi. would using a kernel cleaner do anything after reflashing?
ok i decided to go ahead and try the script, i was able to find it without a problem. cleared cache, ran it, and reflashed a redownloaded kernel and........ it works!! thanks so much guys!
username8611 said:
ok i decided to go ahead and try the script, i was able to find it without a problem. cleared cache, ran it, and reflashed a redownloaded kernel and........ it works!! thanks so much guys!
Click to expand...
Click to collapse
Sweet. You're welcome. That's my good deed for today!.
-Maniac
Pretty much copy and paste, but I have updated it with latest info.
geokilla said:
So this is weird... In four days, the ROM or phone has froze on me about half a dozen times now. The first time when I was setting it up by as I had just done a flash of the ROM. While setting it up, the phone decided to suddenly slow down all of a sudden to a crawl, up to the point where everything started to get washed out and freeze on me. Force restart by holding Volume Up + Power was the only solution to fix it. Just now, my sister had it connected to her computer and was transferring music over into the internal SD when suddenly, the same thing happened. Again, only solution was to force restart. Anyone have this happen to them before? Everything is completely stock except that we're on Dorimanx 5.3 kernel. Then the other times, it would either slow down and freeze in the CWM Recovery Menu, or when she is texting, playing games, etc. There aren't that many apps installed at all. Reflash of kernel doesn't solve the problem.
Click to expand...
Click to collapse
Could it be that I need to flash the phone with official ICS + bootloader + PIT? I jumped straight from stock Gingerbread to custom ICS.
geokilla said:
Pretty much copy and paste, but I have updated it with latest info.
Could it be that I need to flash the phone with official ICS + bootloader + PIT? I jumped straight from stock Gingerbread to custom ICS.
Click to expand...
Click to collapse
try doing a wipe data/factory reset as that is normally a fix to these kind of problems. Also clear cache and dalvik and that should fix the problem!
geokilla said:
Pretty much copy and paste, but I have updated it with latest info.
Could it be that I need to flash the phone with official ICS + bootloader + PIT? I jumped straight from stock Gingerbread to custom ICS.
Click to expand...
Click to collapse
Do not use the .pit file unless you understand 100%sure about what you are doing. That's probably the easiest way to bork your device.
Edit: try flashing a different kernel. Try dark knight or fluxi. I think it would solve your issues
Sent from my GT-P7510 using xda premium
I would get an official rom, and flash it with odin, (no repartition is required) then install your fav. custom rom
just my 2 cents
FWX
UltimateAnas said:
try doing a wipe data/factory reset as that is normally a fix to these kind of problems. Also clear cache and dalvik and that should fix the problem!
Click to expand...
Click to collapse
I can't wipe data/factory reset in CWM for some reason when I first tried to install the custom ROM. Never tried again... I wonder if it's because my I9100 is brickable.
I have cleared cache and dalvik cache but no luck. It even slowed down and froze in CWM Recovery.
kilometers4 said:
Do not use the .pit file unless you understand 100%sure about what you are doing. That's probably the easiest way to bork your device.
Edit: try flashing a different kernel. Try dark knight or fluxi. I think it would solve your issues
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
I know what I'm doing. Flashed with PIT many times before on my Captivate. Haven't tried PIT on her I9100 though. I haven't broken my phone with PIT yet, even though there's quite a few PITs out there lol.
I've read of others running the same combo as me, but they're fine so I wonder what else could cause this...
FireWalkerX said:
I would get an official rom, and flash it with odin, (no repartition is required) then install your fav. custom rom
just my 2 cents
FWX
Click to expand...
Click to collapse
The ICS ROM from the Q&A Sticky should work right? Her I9100 is brickable so.... Gotta be careful.
Flash a stock rom, go to sammobile.com and find one then try again?
Sent from my GT-I9100 using XDA Premium
If I helped you press thanks!
format cache/data/system , then make all wipes , then put your phone in download mode , flash a stock ROM from samfirmware.com , then root your phone !
Running the latest Dorimanx 5.5 kernel and still getting the same problem. In fact, I noticed that if you set it to Performance under Kernel Tweaks in Recovery, the problem is more apparent. Setting it to default causes the issue too.
guys i have a funny issue wonder if i can get some help. I flashed FlappJaxx Beta 3 and had a bad down load or something so anyway tons of reboots and nothing just the non stop vibrate.. well i i finally got it back to the down load screen after pulling the battery several times. and got it Odin back to unrooted and turn on followed the unroot instruction well i left it stock and have had same issue where i click something and it flashes and just vibrates over and over until i pull battery.. well is this phone dead is there a fix?
I odin back again and same thing im going to odin back to stock again then do a stock root and flash another room but its doing the stupid reboot over and over vibrate thing even with the non-rooted stock rom. i just can't seem to find any direction on how to fix this or is it just a lost cause. wanted it to hold on till Note 2 hit shelves but looks like a s3 in my futures.
OK didnt work still FC and boot looping this time i installed Kies and put in download mode and updated the firmware and im getting same thing. GOSH DOGGIT hahaha.. Yea i need some advise i tried everything ive read i must be missing something somewhere.
i guess no one has ever had this before? still no solution i have tried everything format the internal disc but want to know if i do that will i be able to flash odin back to stock any help there?
walkerkd said:
i guess no one has ever had this before? still no solution i have tried everything format the internal disc but want to know if i do that will i be able to flash odin back to stock any help there?
Click to expand...
Click to collapse
First of all, I'm no pro at this stuff but I feel your pain.
It sounds like you are getting stuck in a boot loop of sorts.
What I would do if I was you, after flashing a rom, go back into Recovery mode on the phone and clear out the cache partion, wipe Dalvik cache, and then wipe data/factory reset. After that, reboot your phone - it should start up normally. This is what I do to my phone to get it to function as it should.
Hope that helps
i went in to the advance tab and formatted everything hahah.. it juts wiped and odin back to stock again bout to wipe it and try to odin root see if i can get it done. worth a try ive tried to much stuff im bout to take phone out get my 338 tape to a zombie target and have some fun!
walkerkd said:
i went in to the advance tab and formatted everything hahah.. it juts wiped and odin back to stock again bout to wipe it and try to odin root see if i can get it done. worth a try ive tried to much stuff im bout to take phone out get my 338 tape to a zombie target and have some fun!
Click to expand...
Click to collapse
What language are you using here? I have no idea what you are saying.
kmacsouris said:
First of all, I'm no pro at this stuff but I feel your pain.
It sounds like you are getting stuck in a boot loop of sorts.
What I would do if I was you, after flashing a rom, go back into Recovery mode on the phone and clear out the cache partion, wipe Dalvik cache, and then wipe data/factory reset. After that, reboot your phone - it should start up normally. This is what I do to my phone to get it to function as it should.
Hope that helps
Click to expand...
Click to collapse
Agreed ...
When returning to stock via Odin ...you must reboot into your recovery and wipe data and factory reset the device prior to rebooting.
Even though you wiped prior to flashing the stock Odin .tar image.
These devices stay dirty even after wiping data on occasion ...g
gregsarg said:
Agreed ...
When returning to stock via Odin ...you must reboot into your recovery and wipe data and factory reset the device prior to rebooting.
Even though you wiped prior to flashing the stock Odin .tar image.
These devices stay dirty even after wiping data on occasion ...g
Click to expand...
Click to collapse
Yea i think thats what happen. it was not a clean wipe but i think i got it now i have gotten two fc & reboot i can live with that. thanks you guys for your help.
walkerkd said:
Yea i think thats what happen. it was not a clean wipe but i think i got it now i have gotten two fc & reboot i can live with that. thanks you guys for your help.
Click to expand...
Click to collapse
Boot into your recovery, and "fix permissions "...then reboot.
That should clear up the rest of the issues ...g
gregsarg said:
Boot into your recovery, and "fix permissions "...then reboot.
That should clear up the rest of the issues ...g
Click to expand...
Click to collapse
oh really? wow i didnt even think about that im wiping again and flashing odin to stock but this time after it boots i will wipe factory reset. then root factory reset and fix permissions. thank for the help!
Always welcome ....
Fixing permissions is overlooked a lot ...
And the wrong permissions will cause FC's all over the build ..
I always fix permissions after any flash or modification ....it's just a good habit to get into ...IMHO ...g
Hi guys,
First off, I am new here, so this may not be the best place for this question.
Now, for my question. I have a galaxy s2 and I have tried flashing the Neat Rom on it. However, it always end up in a bootloop. I think the reason is that the factory reset option in ClockWorkmod from rom manager DOES NOT delete all the data in my phone.
So the questions are:
1) Does the data in my phone (like photos etc) need to be deleted to ensure a smooth install?
2) If yes, then how do I make sure when I am in recovery mode (is that what it is called?), the factory reset deletes ALL data.
3) Is this the only thing that causes the bootloop (I have followed all the steps that need to be followed, including wiping data)
I am pretty desperate for flashing a new ROM, because my stock one devours battery.
Any help would be appreciated,
Thanks,
Saltymount
Saltymount said:
Hi guys,
First off, I am new here, so this may not be the best place for this question.
Now, for my question. I have a galaxy s2 and I have tried flashing the Neat Rom on it. However, it always end up in a bootloop. I think the reason is that the factory reset option in ClockWorkmod from rom manager DOES NOT delete all the data in my phone.
So the questions are:
1) Does the data in my phone (like photos etc) need to be deleted to ensure a smooth install?
2) If yes, then how do I make sure when I am in recovery mode (is that what it is called?), the factory reset deletes ALL data.
3) Is this the only thing that causes the bootloop (I have followed all the steps that need to be followed, including wiping data)
I am pretty desperate for flashing a new ROM, because my stock one devours battery.
Any help would be appreciated,
Thanks,
Saltymount
Click to expand...
Click to collapse
Wipe cache and dalvik cache and after flashing, if it bootloops, take battery out, boot to recovery and flash it again.
It helped for me.
Reply
monkeywithbanana said:
Wipe cache and dalvik cache and after flashing, if it bootloops, take battery out, boot to recovery and flash it again.
It helped for me.
Click to expand...
Click to collapse
Well thanks for taking time to help me with that, but I tried it already and it didn't help. Basically what I need is to be able to COMPLETELY wipe the data off my phone before I flash the ROM. My assumption is that, as I said before, the data in my phone is not being wiped away. This is so as, after flashing back stock ROM with Odin (after the bootloop) , all my data, like files, photos etc is all there. And I have read up some information about flashing and I do realise that you cannot have any data on the phone before flashing because the new OS(?) cannot read it or something.
Anyway thanks,
Saltymount
Hey all,
I have yet to find the solution so if one of you 72 people who have seen this question could help, that'd be good.
Sent from my GT-I9100 using xda app-developers app
Thanks Like Hell
Hey monkeybanaana,
After a lot of different tries (millions maybe), and sighing and convincing myself that your method will not work, I just gave it a shot. And what do you, know it worked! Thanks man, I am trying out Neatrom for s2 right now.
Thanks again,
Saltymount
Sent from my GT-I9100 using xda app-developers app[/QUOTE]
I know you guys have had a lot of these questions, but I need help.
I rooted my S2 the other day with jeboo kernel v1.2a I believe. I installed CWM v0.99 aswell. It was all working fine until I went on to the Superuser app on my phone and said something about binary needed updating. So I continued thinking nothing off it. But now my phone is stuck in the boot loop and I don't really know what to do... I have looked around for answers but I am quite confused by it all.
I cannot enter recovery mode but I can enter download mode. I tried installing the jeboo kernel again but nothing happened. I was going to try installing a stock kernel but I don't know what version my phone is.
All of this probably doesn't make sense because to be honest, I don't really know what I'm talking about...
I would greatly appreciate any help!
Thanks.
Download stock rom from Samfirmware, flash with Odin = clean slate. How ? Thread stickied near top of Q&A.
flash another kernel
vinny_ said:
I know you guys have had a lot of these questions, but I need help.
I roted my S2 the other day with jeboo kernel v1.2a I believe. I installed CWM v0.99 aswell. It was all working fine until I went on to the Superuser app on my phone and said something about binary needed updating. So I continued thinking nothing off it. But now my phone is stuck in the boot loop and I don't really know what to do... I have looked around for answers but I am quite confused by it all.
I cannot enter recovery mode but I can enter download mode. I tried installing the jeboo kernel again but nothing happened. I was going to try installing a stock kernel but I don't know what version my phone is.
All of this probably doesn't make sense because to be honest, I don't really know what I'm talking about...
I would greatly appreciate any help!
Thanks.
Click to expand...
Click to collapse
if you are talking about your phones os version then it is jelly bean.
flash another kernel with disabled emmc brickbug(Syiah,speedmod,dorimanx...etc)via odin as recovery comes preinstalled then do a wipe data/factory reset.
Link to siyah kernel:
http://forum.xda-developers.com/showthread.php?t=1555259
Link to speedmod kernel:
http://forum.xda-developers.com/showthread.php?t=2140192
link to dorimanx kernel:
http://forum.xda-developers.com/showthread.php?t=1617219
and if you want to know what is emmc brickbug here is a link:
http://forum.xda-developers.com/showthread.php?t=1756242
i hope it helps and i hope i didnt break the forum rules.
LYandroid said:
if you are talking about your phones os version then it is jelly bean.
flash another kernel with disabled emmc brickbug(Syiah,speedmod,dorimanx...etc)via odin as recovery comes preinstalled then do a wipe data/factory reset.
Link to siyah kernel:
http://forum.xda-developers.com/showthread.php?t=1555259
Link to speedmod kernel:
http://forum.xda-developers.com/showthread.php?t=2140192
link to dorimanx kernel:
http://forum.xda-developers.com/showthread.php?t=1617219
and if you want to know what is emmc brickbug here is a link:
http://forum.xda-developers.com/showthread.php?t=1756242
i hope it helps and i hope i didnt break the forum rules.
Click to expand...
Click to collapse
Omg thank you so much. This worked and got the phone out of the boot loop! Now do you recommend wiping date/factory data or leaving it how it is?
vinny_ said:
Omg thank you so much. This worked and got the phone out of the boot loop! Now do you recommend wiping date/factory data or leaving it how it is?
Click to expand...
Click to collapse
as long as you chose a safe kernel from emmc brickbug you can safely perform a wipe data.
LYandroid said:
as long as you chose a safe kernel from emmc brickbug you can safely perform a wipe data.
Click to expand...
Click to collapse
Could you explain what emmc brickbug is?
I don't really want to perform a factory reset - is it recommended to do one?
Thanks.
Edit: Downloaded emmc brickbug check from the play store. Says"NO. Sane chip." I'm guessing that's good news?
there is no risk of emmc bug
vinny_ said:
Could you explain what emmc brickbug is?
I don't really want to perform a factory reset - is it recommended to do one?
Thanks.
Edit: Downloaded emmc brickbug check from the play store. Says"NO. Sane chip." I'm guessing that's good news?
Click to expand...
Click to collapse
emmc brickbug is a bug with internal storage(internal storage chip)witch makes phone dead if you perform a wipe data/factory reset with CWM or restore a nandroid backup(mostly with ICS 4.04 ROMs)it happens to some Samsung phones(edit:even S3 but in different case it causes sudden death[it also means phone dead but it happens even if you didn't perform wipe data or restore nandroid backup]from no reason).
But since your phone is sane chip,you are LUCKY,there is absolutely no risk of emmc brickbug.
Only perform wipe data/factory reset in case of bootloop (especially when flashing new ROM)or when the phone hangs.
Sorry for bad english.
LYandroid said:
emmc brickbug is a bug with internal storage(internal storage chip)witch makes phone dead if you perform a wipe data/factory reset with CWM or restore a nandroid backup(mostly with ICS 4.04 ROMs)it happens to some Samsung phones(edit:even S3 but in different case it causes sudden death[it also means phone dead but it happens even if you didn't perform wipe data or restore nandroid backup]from no reason).
But since your phone is sane chip,you are LUCKY,there is absolutely no risk of emmc brickbug.
Only perform wipe data/factory reset in case of bootloop (especially when flashing new ROM)or when the phone hangs.
Sorry for bad english.
Click to expand...
Click to collapse
Thanks for the explanation, so I don't need to wipe data/factory reset?
vinny_ said:
Thanks for the explanation, so I don't need to wipe data/factory reset?
Click to expand...
Click to collapse
no, there is no need to wipe data/factory reset
LYandroid said:
no, there is no need to wipe data/factory reset
Click to expand...
Click to collapse
Thank you very much for you help sir!
vinny_ said:
Thank you very much for you help sir!
Click to expand...
Click to collapse
you are welcome
Get your model number from beneath your battery for starters. That's a requirement
Sent from my GT-I9100M using XDA Premium 4 mobile app