[MOD][JB]SystemUI Without Brightness control - Galaxy S Advance I9070 Themes and Apps

Installation:
replace old SystemUI.apk with this one using a root file manager. Dont forget to set permissions(rw-r--r--)
For the transparent one just rename it to SystemUI.apk and then this^
Maybe back up old SystemUI.apk if you want to.
Credits: Frapeti for black Statusbar

darrie1 said:
Installation:
replace old SystemUI.apk with this one using a root file manager. Dont forget to set permissions!
Maybe back up old SystemUI.apk if you want to.
Credits: Frapeti for black Statusbar
Click to expand...
Click to collapse
Can you share what tutorial you was using? Or you figure it out by yourself. I tried to do this, and I didn't get result. I want to know if I did it wrong. Thank you in advance. :good::good::good:
P.S. Nice work!!!

shut_down said:
Can you share what tutorial you was using? Or you figure it out by yourself. I tried to do this, and I didn't get result. I want to know if I did it wrong. Thank you in advance. :good::good::good:
Click to expand...
Click to collapse
When you get it right, make sure to keep taskbar transparent

i think is like another system apk's, you will need an root explorer (in my case root explorer) set R/W permisions then remane the old SystemUI.apk --> SystemUI.apk.bak then paste the SystemUI.apk (that you downloaded) after you pasted the file set permisions to rw-r-r after this reboot
P.S. If the SystemUI.apk isn't a good work you will have trouble after the reboot but if you have patience and if you move fast you will make to restore the old one ...

Brocky2011 said:
i think is like another system apk's, you will need an root explorer (in my case root explorer) set R/W permisions then remane the old SystemUI.apk --> SystemUI.apk.bak then paste the SystemUI.apk (that you downloaded) after you pasted the file set permisions to rw-r-r after this reboot
P.S. If the SystemUI.apk isn't a good work you will have trouble after the reboot but if you have patience and if you move fast you will make to restore the old one ...
Click to expand...
Click to collapse
That is ok, I have done something wrong when I tried to change code I think. I decompiled this SystemUI.apk, and there was no changes that I was doing then.

shut_down said:
Can you share what tutorial you was using? Or you figure it out by yourself. I tried to do this, and I didn't get result. I want to know if I did it wrong. Thank you in advance. :good::good::good:
P.S. Nice work!!!
Click to expand...
Click to collapse
I figured it out myself
What I did:
decompiled apk
go to /res/values/bools.xml
Changed this line:
<bool name="config_useBrightController">true</bool>
to
<bool name="config_useBrightController">false</bool>
recompiled apk.
pretty easy actually:angel:

darrie1 said:
I figured it out myself
What I did:
decompiled apk
go to /res/values/bools.xml
Changed this line:
<bool name="config_useBrightController">true</bool>
to
<bool name="config_useBrightController">false</bool>
recompiled apk.
pretty easy actually:angel:
Click to expand...
Click to collapse
Thanks. :good::good::good: LOL, and I was adding android:visibility="gone" to tw_status_bar_expanded.xml in part where is brightness slider mentoned. :angel::angel::angel:

Works great, both the black and transparent. Thanks for clearing the statusbar tho

Thanks for this ui. Can you make this? Hint for making 15 Toggle Quick Panel MOD.
Here http://forum.xda-developers.com/showthread.php?t=1876384.


digdarsan said:
Thanks for this ui. Can you make this? Hint for making 15 Toggle Quick Panel MOD.
Here http://forum.xda-developers.com/showthread.php?t=1876384.

Click to expand...
Click to collapse
I Tried it but SystemUI keeps force closing:banghead:, so i am unable to make this mod Work for our device for now
Sent from my GT-I9070 using xda app-developers app

darrie1 said:
I Tried it but SystemUI keeps force closing:banghead:, so i am unable to make this mod Work for our device for now
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Thanks for trying, keep trying. I am also trying. here also force close for systwmui.

Permssions
darrie1 said:
Installation:
replace old SystemUI.apk with this one using a root file manager. Dont forget to set permissions!
For the transparent one just rename it to SystemUI.apk and then this^
Maybe back up old SystemUI.apk if you want to.
Credits: Frapeti for black Statusbar
Click to expand...
Click to collapse
Permissions settings are rw-r--r-- ?

yea, u need to change the permission just like the stock SystemUI did..or else its not work..
the stock SystemUI read like this if you are using Root Explorer :-
User = read, write (tick)
Group = read (tick)
Others = read (tick)
let all option untick except those three above.
then reboot your phone..
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
dont forget to hit THANKS button if this help you :highfive:

KINGbabasula said:
Permissions settings are rw-r--r-- ?
Click to expand...
Click to collapse
Yes. Ive changed OP
Sent from my GT-I9070 using xda app-developers app

XXLY ONLY, not Sure about XXLZ. NOT WORKING ON XXLQ4.
I made a few more modifications:
Removed Google now button
Smaller toggles and new icons
Icons by tahapapun. Thank you
White pulldown thingy.
http://db.tt/AjWIXkPq
Verstuurd van mijn GT-I9070 met Tapatalk

darrie1 said:
I made a few more modifications:View attachment 1717821
Removed Google now button
View attachment 1717822
Smaller toggles and new icons
Icons by tahapapun. Thank you
White pulldown thingy.
http://db.tt/AjWIXkPq
Verstuurd van mijn GT-I9070 met Tapatalk
Click to expand...
Click to collapse
Are you using the new XXLQ4 firmware? cuz i'm using it and this mod don't work anymore (before flash XXLQ4 i was using XXLPY and was fine)

darie..just want to know..when compile SystemUI.apk..did u encounter translation error,but still the apk generated?is this normal?just wondering..thx..and if dont have such error..can u provided the tools which u use..thx vry much!

caroulx said:
darie..just want to know..when compile SystemUI.apk..did u encounter translation error,but still the apk generated?is this normal?just wondering..thx..and if dont have such error..can u provided the tools which u use..thx vry much!
Click to expand...
Click to collapse
Translation errors are normal, because you do not have translations for all. I was getting them, and still apk was working ok. :laugh:

shut_down said:
Translation errors are normal, because you do not have translations for all. I was getting them, and still apk was working ok. :laugh:
Click to expand...
Click to collapse
Oic..thx..anyway..if u or someone can help me with 15 toggles..here's the problem
:silly:

R: [MOD][JB]SystemUI Without Brightness control
I want to try can you send me the framework-res?
Sent from my GT-I9070 using xda app-developers app

Related

[MOD for P][VRTheme][ICS]Smaller Onscreen Button

Here is a little tutorial on how to get smaller onscreen navigation buttons... i was formely using On Screen Button Enabler App by Soheil_rf but tha buttons re too big for my liking so i explore here on xda & get solution.
Tools Needed:-
- Framework-res.apk from yur ROM
- Notepad++
- Apktool but yhu can also use ApkManager
Steps:::::::::::::::::::::::::::::
1. Copy yur framework-res.apk to Apktool folder
2. Install yur framework-res.apk for de/recompiling....
Code:
apktool if framework-res.apk
3. Decompile tha apk
4. Goto folder framework-res/res/values, Open bools.xml with Notepad++ & edit den save; change from false to true
Code:
<bool name="config_showNavigationBar">true</bool>
5. Goto folder framework-res/res/values, Open dimens.xml with Notepad++ & edit den save; i change tha Height & Width values
Code:
<dimen name="navigation_bar_height">35.0dip</dimen>
<dimen name="navigation_bar_width">32.0dip</dimen>
6. Recompile tha edited decompiled framework-res.apk
7. Voila & Flash.......:highfive::highfive::highfive:
Update:::::::::::
VRTheme mod added... just flash & enjoy, no need for editing!!! it should work for all Xperia P CM9/STOCK ROMs.
- On Screen Button (OSB)
- Auto-Rotation for Lockscreen
- Navigation bar pngs for SystemUI incase its not present in yur SystemUI....
Optional;
* check yur SystemUI.apk for tha files in Nav_bar.zip, if present den yhu dnt need it but if not copy all tha pngs to your SystemUI.apk [res/drawable-hdpi folder]
* i attach a flashable zip for yhu guys...... hope yhu guys dnt mind!:silly:
Hope tha tutorial is helpful......
Thanks:-
Evilsto
Abhinav2
XDA
Me
How to Enable Lockscreen Rotation
Additional.....
Steps:::::::::::::::::::::::::::::
1. Copy yur framework-res.apk to Apktool folder
2. Install yur framework-res.apk for de/recompiling....
Code:
apktool if framework-res.apk
3. Decompile tha apk
4. Goto folder framework-res/res/values, Open bools.xml with Notepad++ & edit den save; change from false to true
Code:
<bool name="config_enableLockScreenRotation">true</bool>
change from true to false
Code:
<bool name="lockscreen_isPortrait">false</bool>
5. Recompile tha edited decompiled framework-res.apk
6. Voila & Flash.......:highfive::highfive::highfive:
Thanks:-
Sandy
Me
thank you very much
Mtakween said:
thank you very much
Click to expand...
Click to collapse
thanks a ton buddy.........
Good work man :good:
Keep going
Best Regards,
AJ
alokbina is now Abhinav2
Abhinav2 said:
Good work man :good:
Keep going
Best Regards,
AJ
alokbina is now Abhinav2
Click to expand...
Click to collapse
thanks for helping & posting motivational comments!
Godbless...:highfive::good:
Just a correction....Well you included the bools.xml and dimens.xml within the vrTheme but not all roms will have same bools.xml and dimens.xml which may conflict with their framework...so just leave the vrTheme empty with the correct file structure and tell them how to add bools.xml and dimens.xml in it
Best Regards,
AJ
Abhinav2 said:
Just a correction....Well you included the bools.xml and dimens.xml within the vrTheme but not all roms will have same bools.xml and dimens.xml which may conflict with their framework...so just leave the vrTheme empty with the correct file structure and tell them how to add bools.xml and dimens.xml in it
Best Regards,
AJ
Click to expand...
Click to collapse
Okies brov..... but i guess it will work on all CM9 roms for Xperia P!
Nice work brov!!
But many devs already know this(me)!
Anyways Good for freshers......
Sent from my Xperia P using XDA-premium
sadiq23 said:
Nice work brov!!
But many devs already know this(me)!
Anyways Good for freshers......
Sent from my Xperia P using XDA-premium
Click to expand...
Click to collapse
i know but just for new members brov......
Would you mind doing The same for XU?
Strike_Riku said:
Would you mind doing The same for XU?
Click to expand...
Click to collapse
post yur framework file den i ll make it brov..... if yhu can get framework-res.apk from stock & cm9!!!
thanks!

[[BOOTANIMATION]]New BootAnim ADDED!!!

NEW BOOTANIMATION ADDED!!
Hi x8 users, i have resize this awesome bootanimation to fit our phone screen.
Nexus 4 Particles [coming soon]
Download link:
Nexus 10 Stock
Download link:Click Here
New GOOGLE Bootanimation
Download link:Click Here
Xperia Z Ultra Bootanimation
Download link:Click Here
Installation process:~
For CM base ROM>>
Rename it to "bootanimation.zip"
Using any root explorer, go to system/media/"paste here"
Set permission to rw rr ::>
Tick like this
x x _
x _ _
x _ _
Then, reboot.
Done~.
Credits >}>
@overhauling
If u guys have made such an awesome bootanimation, feel free to share your works to his thread,,
forum.xda-developers.com/showthread.php?t=2085023
And also share with us.
Anyone try this??
Fix link first please !
The link ain't working
I think you didn't set PUBLIC share the file
New bootanimation ADDED!!!
Feel free to enjoy it
Bump… … …
kreatonn said:
Bump… … …
Click to expand...
Click to collapse
X8's section not the best as it used to,
so many dumped X8. and so many lazy to touch.
since got powerful devices.

[App][sgyd] lollipop launcher (holo launcher themed)

Here i present you the LOLLIPOP LAUNCHER for our SGYD/SGY too...
steps-
- reboot to recovery with cwm
- then mount system, data, cache,etc
- then flash my my zip.....
- unpack/unzip my settingbackupzip
- now put my holo setting in sd card\hololauncher\settingsbakups
- restore setting from holo launcher (l setting bak)
- enjoy....
Credits-
_ LHANK BOEANA
_ JOKKO N
_ MY BRAIN
_ telll me if i forgot your name...
Nice one bro..
Its a droidbuster launcher?

Particle Effect Walkman Widget For JB, KK, CM12, CM12.1

Requirements
Superuser Mod
Build.prop
Home Xperia
1. Add Build.Prop
##Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v,m=y
2. Download
MusicWidget.apk
3. Copy to System App
Set Permission Reboot :laugh:
Ohh my goddd#### i was desperately waiting for this !!!
it is godd and working too flawlessly in aicp!!!
but the only thing which i didn't like is its sparkle effects colour it has only white colour could you tell us a way or include a colour changing option in new version??
Everytime i add walkman widget home xperia is force close im on stock jb rooted lbl
Sent from my C5303 using XDA Free mobile app
anisingh62 said:
Ohh my goddd#### i was desperately waiting for this !!!
it is godd and working too flawlessly in aicp!!!
but the only thing which i didn't like is its sparkle effects colour it has only white colour could you tell us a way or include a colour changing option in new version??
Click to expand...
Click to collapse
ok i will find out to change the color
xlance06 said:
Everytime i add walkman widget home xperia is force close im on stock jb rooted lbl
Sent from my C5303 using XDA Free mobile app
Click to expand...
Click to collapse
yeah add action widget freezee no responding
You must enter build.prop...
## Disable Bytecode Verification
dalvik.vm.verify-bytecode = false
dalvik.vm.dexopt-flags = v = n, o = v, m = y
vandiaz_sairavinz said:
ok i will find out to change the color
Click to expand...
Click to collapse
thanks alot brother u havr done a nice piece of work and please could you make or port stryder type rom. And could you add real xperia z3 systemui?
is it possible?
vandiaz_sairavinz said:
yeah add action widget freezee no responding
You must enter build.prop...
## Disable Bytecode Verification
dalvik.vm.verify-bytecode = false
dalvik.vm.dexopt-flags = v = n, o = v, m = y[/I already edit build.prop by adding that line but still Xperia home stop working
Sent from my C5303 using XDA Free mobile app
Click to expand...
Click to collapse
how i can edit the build.prop? @vandiaz_sairavinz
Fred_INA said:
how i can edit the build.prop? @vandiaz_sairavinz
Click to expand...
Click to collapse
open build.prop file in text editor through root explorer and add those lines,save and exit now restart your phone
Thanks bro
Works perfectly on stryflex.
Finally ?
vandiaz_sairavinz said:
Requirements
Superuser Mod
Build.prop
Home Xperia
1. Add Build.Prop
##Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v,m=y
2. Download
MusicWidget.apk
3. Copy to System App
Set Permission Reboot :laugh:
Click to expand...
Click to collapse
what are the permissions plz?
Any chance getting this for CM13?

[S905X2][ROM] Android 9 rom Collection

1. [ROM] Beelink GT1-Mini Volksware v.2.0_by_Sasvlad (Android 9.0) -> subforum
https://mega.nz/#!fwsUQSRQ!svi1RnL4R...vmvgA2GsrQ5G2c
(for me the best Android 9 rom for T95Q at the moment.. )
-------------------------------------------------------------------------------------------------------------------------
or 2. [ROM] Beelink GT1-Mini (and some others) AndroidTV v.2.0 by Sasvlad Android 9.0 ->subforum
https://mega.nz/#!flNRCaTQ!J2g1GnXxW...jWnaI0yxcS6pCU
------------------------------------------------------------------------------------------------------------------------
or 3. [ROM] Android 9 image for T95Q
ported from A95xF2 TvBox by Vasily_5 (4pda.ru)->
https://mega.nz/&xid=17259,1500004,1...XJGDbav9TysvYk
--------------------------------------------------------------------------------
or 4. New Android 9 rom by ALVATECH:
https://forum.freaktab.com/forum/tv-...9-0-pie-s905x2
Tested with my T95Q​​​​​
everything works fine. ..
(use 95x2 rom)
only LED is always on, but who cares..
Patch for T95Q and X96Max to control the serial remote control ->
(install with TWRP )
https://drive.google.com/file/d/15W-...ew?usp=sharing
______ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _: _ _
just install the image with USB burning tool.
working: WIFI, BT, Playstore ....all apps....
not working: stock remote -> new Patch (turn the box off and on! )
and LED is always on (blue)
---------------------------------------------------------------------
!!New Patch for T95Q and X96Max to control the serial remote control ->
(install with TWRP ) ->
https://mega.nz/#!7zBkxIzQ!thh7yjrjc...EHCH8vF9-c7AYM
---------------------------------------------------------------------------------------
tested and working good 4 me,
but u install it at ur own risk...
Will any of SASVLADS roms, work with Beelink GT-KING PRO S922X-H S/N: SA9H ????
As i like the look of the rom

Categories

Resources