Relocked bootloader after s-off - Verizon HTC Droid Incredible 4G LTE

I accidentally hit the factory reset option while in the bootloader. After this my phone would not boot past the HTC splash screen, and I couldn't boot into the recovery (it would just boot loop). So, I decided to reflash the RUU to get out of the loop, This worked fine except for the fact that now in the boot loader the "dirty racun" banner has been replaced with the "locked" banner and I can't install a custom recovery, when I type in the fastboot command to push a recovery I get an error saying it failed. Anyone have any ideas? I was going to redo the bootloader unlock script that team fireballas wrote but I couldn't log into htcdev.com to get the unlock.bin file. I also retried the rabies shot from unlimited.io but it said the racuns had already been released. It appears that I have s-off but the bootloader is locked again.
Sent from my KFTT using xda app-developers app

You need to download the eng hboot (dirtyracun) from unlimited io website and flash it you can easily do this through the bootloader by naming the zip PJ53IMG and booting into the boot loader or you can do it through fastboot.

Related

phone won't boot - request HELP !!!

hi all
Forgot to charge my EVO 3D (CDMA) and battery completely drained. Even after using another fully charged battery my phone goes to bootloop - just shows the HTC logo and reboots again and again. Here is what I have:
hboot : 1.5 (S-ON)
radio : 1.06.00.1216
ota : 2_17.651_5
(I am using this phone in India activated on Reliance)
As the phone doesn't boot I can't access it thru adb to give command 'adb reboot bootloader'
I can get bootloader by pressing vol_down+power
When I run the 2_17.651_5 RUU (exe) from my computer while phone is on fastboot, it completes successfully without errors. But still on reboot it just stays at the htc screen and reboots (guess it's becoz stock kernel not getting flashed as the phone is s-on)
kindly help to get back my phone boot again
thanks and regards
ananth
R.I.P
Sent from my HTC.EVO.3D.Xda Premium
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
jdeoxys said:
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
Click to expand...
Click to collapse
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
ananth001 said:
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
Click to expand...
Click to collapse
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Sent from my PG86100 using Tapatalk
megabiteg said:
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Click to expand...
Click to collapse
thanks. extracted boot.img from freeza's kernel and flashed from fastboot after unlocking. But still doesnt solve problem. Can you give me a link for boot.img
Pleassssssse HELP !!!!!!
I have the exactly the same problem, a full reboot result in boot loop, and can not fix it by now.
I guest the phone is rooted before OTA, so OTA can not flash kernel successfully because the wrong signature, and the phone will not boot because the wrong kernel.
I have tried ruu, fastboot boot recovery.img and etc, all failed.
The key point is that, the phone is rooted and you tried OTA. HTC OTA must have a stupid bug, it can not recovery from a partial update, or automatically roll back becasuse of the partial update, dem!
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
ananth001 said:
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
Click to expand...
Click to collapse
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I wonder the same thing all I saw was 1.5
Sent from my PG86100 using xda premium
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Reliance has both CDMA as well as GSM service in India. Mine is a Reliance CDMA MDN.
thanks and regards
reaper24 said:
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Click to expand...
Click to collapse
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
ananth001 said:
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
Click to expand...
Click to collapse
Have you tried to just run the RUU like you said boot turn debug on .... Then go to hboot flash your recovery...
Then fastboot boot recovery.img.
This should work I have unrooted my phone 3 times already in the past month Trial and Error on my part adb always found my phone...
I am tryin to figure out what is going wrong on the last part with TWRP...
Since you said after you do that it was a no go? What happend ? Adb should still be working since you just flashed the recovery...
Anyways I hope you get it solved man I am tryin to figure this problem out.
Do you have a rom already ready to be flashed on your SD card?
Problem is, since i’m not able to android boot I can't reboot bootloader from adb, as I can't connect adb without the phone normal booting. When I boot it just stays at the HTC white screen.
I have flashed twrp recovery from fastboot, but when I give command 'fastboot boot <twrpxxxxx>.img it just boots back to the HTC splash screen
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Android Cowboy said:
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Click to expand...
Click to collapse
As I mentioned in earlier post, have tried flashing PG86IMG.zip from bootloader, but still phone doesn't boot properly and is in a bootloop.
You've used the following file and done these exact steps and allowed the phone to boot to full stock OS? (assuming 2.17.651.5 is correct version)
OPTION 2 - RUU.zip info:
I prefer the .exe version but xHausx’s “FULL” PG86IMG_2.17.651.5.zip may work for you (must be renamed PG86IMG.zip). Make sure you have plenty of battery/charge left!
- (XDA) Xhausx full PG86IMG.zip RUU images (651.5 zips)
PG86IMG_2.17.651.5.zip http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564
MD5: 8F82C2D8F98C077AF775266064BACB5D
From Scrosler's zip Directions : http://forums.androidcentral.com/htc-evo-3d-rooting-roms-hacks/107641-how-return-100-stock-all-versions.html
Scrosler; said:
USE ONLY FOR EMERGENCY PURPOSES. THIS OVERWRITES EVERYTHING!!!!
**THIS WILL RETURN YOU TO FRESH OUT OF THE BOX**
You will not need any special drivers loaded, etc...
1.Download the stock ROM ZIP image from here: and rename it "PG86IMG.zip"
2.Copy it to SD Card
3.Reboot phone into hboot mode by holding volume down and then press power.
Keep volume down held until you boot into hboot mode.
4.In hboot mode the phone will scan the SD card with the image. Once it finds it will ask you if you want to update. Press "Power" to update.
5.Wait.... For a while. When it gets to "system" it will loop a few times. Its quite nerve wracking actually but after about 5 or 6 times it will complete.
6.Once the entire flash is complete it will prompt you to "press power to reboot." Press power and your phone will reboot to 100% stock ROM.
Click to expand...
Click to collapse

Problems flashing recovery to LTEvo

So I am trying to the command line to flash TWRP to my phone via Fastboot. However, when I try to do it it says "Sending" and just hangs there. It doesn't actually flash the recovery image. As far as I can tell my bootloader is unlocked. I ran a root on my phone and my bootloader has the "Tampered" label on it when I boot into fastboot. Also, I downloaded the recovery file directly from Team Win's website. So I know the file is good to go.
Does anyone have any suggestions?
Reboot everything and double check drivers. Other than that someone more knowledgable will have to chime in.
Concordium said:
So I am trying to the command line to flash TWRP to my phone via Fastboot. However, when I try to do it it says "Sending" and just hangs there. It doesn't actually flash the recovery image. As far as I can tell my bootloader is unlocked. I ran a root on my phone and my bootloader has the "Tampered" label on it when I boot into fastboot. Also, I downloaded the recovery file directly from Team Win's website. So I know the file is good to go.
Does anyone have any suggestions?
Click to expand...
Click to collapse
Tampered signifies that you ran root. Underneath that message it will say locked or unlocked. If it doesn't say unlocked, then you need to rerun the process for the HTC unlock.

[FIX] & [DOWNGRADE HBOOT] - Stupid Bootloop with HBOOT 1.58 EVO 3D - UPDATED 1-7-13

[FIX] & [DOWNGRADE HBOOT] - Stupid Bootloop with HBOOT 1.58 EVO 3D - UPDATED 1-7-13
My friend's phone had the annoying bootloop problem. I'm posting this because after a lot of searching, I found nothing to fix the bootloop, just people asking about it. Here's a simply fix.
BOOTLOOP FIX:
If you already tried unlocking/ and you're still S-On, then set everything back to stock:
Flash the attached stock recovery,
fastboot oem lock to be locked again.
Use the latest RUU to update the phone.
At this point the stock, locked phone should function normally.
I have busted this phone a ton of times trying to get different recoveries and roms to work, and this method has always fixed the bootloop.
At this point you can try whatever tutorial you like to downgrade or customize the phone...and if it breaks, hopefully this method will still work for you. If it doesn't work the first time, try running the RUU a second time. Or third.
CUSTOM RECOVERY:
If you want to unlock and install custom stuff:
Use the HTC Dev unlock method.
Fastboot install CWM Recovery v5.8.0.1 from their website -
The ONLY recovery that I've found to be compatible with HBOOT 1.58 is CWM v5.8.0.1. Everything else leaves the phone in an infinite bootloop. Maybe others have had different experiences.
To fastboot install the CWM recovery, rename the file to recovery.img (for simplicity) and type in a command prompt (same directory as fastboot and recovery.img):
fastboot flash recovery recovery.img
Then, to enter into recovery, either pull the battery and enter recovery through the bootloader menu, or type in:
fastboot boot recovery.img
This should get you into the working CWM recovery. If it doesn't, it's because HTC hates people that buy their phones.
If you feel like giving up and running stock, all you need to do is reflash the stock recovery, and relock the phone using fastboot oem lock - and now it should run the stock rom...and if it doesn't, then rerun the RUU. Tedious.
HBOOT Downgrade & S-Off:
If you have: Stock 2.89 RUU / Locked / S-On
Unlocked with HTC Dev method
Flash CWM 5.8.0.1 from the CWM website:
fastboot flash recovery recovery.img - then
fastboot boot recovery.img (to enter recovery)
Flash the SetMainVersionLOW.zip file attached (thanks ramjet73)
Relock the phone with: fastboot oem lock
Use the Unknownforce/closeone hboot downgrade with live CD using the 2.89 RUU's rom.zip (from windows temp folder) renamed to PG86IMG.zip - go to the Unknownforce/closeone thread for this part: http://forum.xda-developers.com/showthread.php?t=1563342
Then flash the standard 1.13 RUU on your windows system (may also work with the PG86IMG.zip method, have not tested)
Then use revolutionary 0.4pre4 to S-Off
Finally, you need to flash a custom recovery which you can do from revolutionary, or from fastboot as listed above. Once the recovery is installed, you should be able to install a compatible custom rom and kernel.
You bootloader screen should now say REVOLUTIONARY on top instead of UNLOCKED or RELOCKED etc... and show HBOOT 1.40.1100.
Thanks to Unkownforce, closeone, and ramjet73 for making this possible.
PS. Screw up your phone at your own risk.
In case anybody was wondering, the RUU I've been using is the latest one at the time of this post: RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe
If by "reset s-on" you mean to switch s-off to s-on using the "write secureflag 3" command, then there is no need to do that., you can directly run RUU.exe on S-OFF and any recovery (hboot needs to be one of the stock versions I guess, I dont know for sure).
And I dont know if theres any relation with hboot version and recovery but TWRP and 4ext recovery works for every hboot. And if you are s-on, you dont always have to flash boot.img seperately using fastboot if you turn smartflash on.
mnomaanw said:
If by "reset s-on" you mean to switch s-off to s-on using the "write secureflag 3" command, then there is no need to do that., you can directly run RUU.exe on S-OFF and any recovery (hboot needs to one of the stock versions, I dont know for sure).
And I dont know if theres any relation with hboot version and recovery but TWRP and 4ext recovery works for every hboot. And if you are s-on, you dont always have to flash boot.img seperately using fastboot if you turn smartflash on.
Click to expand...
Click to collapse
Yeah, don't ever do the write secure flag command. That's bad news. Running a ruu will not s- on, and you're better staying s-off
Sent from my PG86100 using xda app-developers app
Reset s-on, and
fastboot oem lock to be locked again.
Click to expand...
Click to collapse
As others have mentioned, this is completely unnecessary. Once you're s-off htc's unlock is a non-issue and you can run any RUU you wish to at any time.
I know of no reason whatsoever where someone would need to set S-ON once it's off.
xHausx said:
As others have mentioned, this is completely unnecessary. Once you're s-off htc's unlock is a non-issue and you can run any RUU you wish to at any time.
I know of no reason whatsoever where someone would need to set S-ON once it's off.
Click to expand...
Click to collapse
@xHausX
Totally agree. The only reason to set S-ON once S-OFF is achieved is to return to 100% stock for warranty service or to sell the phone.
Nice to see you in these parts again and Happy New Year!
@joshdv
The CWM recovery version (6.0.1.4) you attached to the OP gives an error about accessing mmcblk0p34 when used with the engineering (ENG) bootloader, which a lot of Evo 3D users have installed to run GB or AOSP based ROM's. The current version of TWRP2 (2.3.3.0) has a similar error about the misc partition and I don't know if those errors will affect anything else or not. Apparently those errors are caused by variations in the emmc partition layouts with different bootloaders.
I prefer to use 4EXT which doesn't show any errors once cache+dalvik are formatted.
ramjet73
I updated the OP. I read somewhere else that it was necessary, this phone was never S-Off, so I wasn't sure.
Thanks
Everytime i run the ruu for my 3d it will finish as it has completed and boot. But whenever i remove my battery to switch it with a secondary, i used to do this before bed every night, i get a bootloop and cant boot untill i boot into bootloader and select the recovery option which wipes the phone and boots untill then next time i remove the battery. Why wont the RUU fix this? ive ran it multiple times. And also whenever im in the stock recovery and i select factory reset or any of the options i get "invalid option" "sucess rebooting by reason oem-00" what does this mean!?! can this be my sd? cause i cant mount cache recovery command or mount anything in recovery for that matter. if i need an sd ill buy one. just dont wanna find out its not my sd. and ive run the RUU about 7 times in total and nothing helps. thanks
ramjet73 said:
@joshdv
The CWM recovery version (6.0.1.4) you attached to the OP gives an error about accessing mmcblk0p34 when used with the engineering (ENG) bootloader, which a lot of Evo 3D users have installed to run GB or AOSP based ROM's. The current version of TWRP2 (2.3.3.0) has a similar error about the misc partition and I don't know if those errors will affect anything else or not. Apparently those errors are caused by variations in the emmc partition layouts with different bootloaders.
I prefer to use 4EXT which doesn't show any errors once cache+dalvik are formatted.
ramjet73
Click to expand...
Click to collapse
Yeah, I put WIP because it still never worked right, it was just the only one that ever actually loaded. I still hate this phone, I wish HTC was as nice as Samsung. It's so easy to work with Samsung, I always get mad trying to work around HTC's crippling B.S. Still better than Motorola though.
bootloop in my Htc Evo 3D hboot 1.53.007
How do you flash the stock recovery?
jcthelight said:
How do you flash the stock recovery?
Click to expand...
Click to collapse
put your phone into the bootloader by holding the volume down key while turning it on.
Assuming you have the sdk tools, or some basic set like QADERSO.zip:
select fastboot from the bootloader menu, then connect it to your computer with a usb cable (should change to fastboot usb)
in a command prompt (or terminal window, depending on your OS)
Go into the folder containing both fastboot and the recovery.
Type in: fastboot flash recovery recovery.img (rename the stock recovery included in the OP to just recovery.img)
Once that is complete, you will have the stock recovery.
joshdv said:
put your phone into the bootloader by holding the volume down key while turning it on.
Assuming you have the sdk tools, or some basic set like QADERSO.zip:
select fastboot from the bootloader menu, then connect it to your computer with a usb cable (should change to fastboot usb)
in a command prompt (or terminal window, depending on your OS)
Go into the folder containing both fastboot and the recovery.
Type in: fastboot flash recovery recovery.img (rename the stock recovery included in the OP to just recovery.img)
Once that is complete, you will have the stock recovery.
Click to expand...
Click to collapse
i have hboot 1.53 with s-on stuck on bootloop and i did as u said i flashed stocked recovery from temp folder from ruu-ics-35-ara.exe still my phone is in boot loop. Even i tried oem lock and run ruu.exe file upto 65% process goes fine then suddenly shows 100% process complete and reboot device(still stuck on bootloop).... plz give me suggestion to get rid of this thing.....
"RUU_SHOOTER_U_ICS_35_S_HTC_ARA_3.28.415.2_Radio_11.77.3504.00U_11.25.3504.06_M_release_264795_signed.exe"
joshdv said:
put your phone into the bootloader by holding the volume down key while turning it on.
Assuming you have the sdk tools, or some basic set like QADERSO.zip:
select fastboot from the bootloader menu, then connect it to your computer with a usb cable (should change to fastboot usb)
in a command prompt (or terminal window, depending on your OS)
Go into the folder containing both fastboot and the recovery.
Type in: fastboot flash recovery recovery.img (rename the stock recovery included in the OP to just recovery.img)
Once that is complete, you will have the stock recovery.
Click to expand...
Click to collapse
I'm a little confused. I've never rooted this phone so it's completely stock. My phone keeps powercycling. When I type in "fastboot flash recovery recovery.img" my cmd prompt tells me FAILED (remote: signature verify fail).
Any suggestions?
Re: [FIX] & [DOWNGRADE HBOOT] - Stupid Bootloop with HBOOT 1.58 EVO 3D - UPDATED 1-7-
Dang it! Why does it seem like developers have quit developing fully functioning roms for this phone? I live in a good 4g area so those roms without it are out of the question for me. And the others are having major issues with cameras, video playing, text messaging that keep it from being a daily....
And after using jellybean these ICS roms feel very incomplete even though they're more functional. I know you developers are busy people but please, can ICS get freshened up. Or just ignore me if y'all think the camera/text thing will be resolved very soon.
Sent from my PG86100 using xda premium

Help stuck in bootloader <SOLVED>

So I was on Mean bean but I was told I would need to go s-off or relock to get caught up with 3.16
Since I'm on win8 64Bit I chose to relock
So This is what I did
I booted into fact boot
Via ADB I rean fastboot OEM lock
It would then only boot and reboot into fastboot?
I ran the 3.15 RUU and it completed successful but it will not boot only into fast boot.
Any ideas?
Should mention
****Tampered****
****Relocked****
HBOOT 2.09
Progress so far
I unlocked phone again via htcdev.com
Phone is rebooting to Meanbean?
Ok it finally rebooted and looks like all is ok!

Stuck Fastboot-can't flash RUU to return to stock

I was in the process of returning my dna to stock so that I could sell it. I performed the OEM lock function which resulted in my bootloader screen looking what what is in the attached picture. After this I attempted multiple, multiple times to install the RUU.exe on my Mac Mini running Windows 7 in bootcamp mode (not virtualization). Each time it popped up an error saying that it couldn't install. At this point, even after flashing the 1.15 hboot I'm still mostly stuck int he bootloader. My operating system no longer boots. I really only have fastboot access and no idea how to get out of this situation.
I've tried to flash a custom recovery so that at least I could flash a rom, but whenever I try to fastboot it over I get an error saying "FAILED <remote: not allowed>". So if I can't flash a recovery ROM, and I can unlock my bootloader again, and I can't boot into a ROM, what can I do. I spent the last 6 hours trying to find an answer and I'm totally out of options now.
doctajay said:
I was in the process of returning my dna to stock so that I could sell it. I performed the OEM lock function which resulted in my bootloader screen looking what what is in the attached picture. After this I attempted multiple, multiple times to install the RUU.exe on my Mac Mini running Windows 7 in bootcamp mode (not virtualization). Each time it popped up an error saying that it couldn't install. At this point, even after flashing the 1.15 hboot I'm still mostly stuck int he bootloader. My operating system no longer boots. I really only have fastboot access and no idea how to get out of this situation.
I've tried to flash a custom recovery so that at least I could flash a rom, but whenever I try to fastboot it over I get an error saying "FAILED <remote: not allowed>". So if I can't flash a recovery ROM, and I can unlock my bootloader again, and I can't boot into a ROM, what can I do. I spent the last 6 hours trying to find an answer and I'm totally out of options now.
Click to expand...
Click to collapse
You need to unlock again in order to flash back a custom recovery. You also need to have the stock splash screen before you ruu. Had the exact same issue you had. Stock h-boot, stock splash screen and relock and all should be good.
That is my main problem. All of the unlock methods require me to load load an apk to change the CID. I can't do that in fastboot. Is there another unlock method I'm missing that allows you to do it from the fast boot mode?
Sent from my LG-D800 using Tapatalk
if u have your original unlock code from htc dev I think u can fastboot flash that code to unlock again. its in the forum somewhere just not sure where it is.
try this thread, good luck
http://forum.xda-developers.com/showthread.php?t=2160677
You don't have to run a apk to change the cid just Google change cid commands, you do it through adb change it to 22222222 then redo the HTC dev to get your unlock.bin again if u don't have it.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
doctajay said:
I was in the process of returning my dna to stock so that I could sell it. I performed the OEM lock function which resulted in my bootloader screen looking what what is in the attached picture. After this I attempted multiple, multiple times to install the RUU.exe on my Mac Mini running Windows 7 in bootcamp mode (not virtualization). Each time it popped up an error saying that it couldn't install. At this point, even after flashing the 1.15 hboot I'm still mostly stuck int he bootloader. My operating system no longer boots. I really only have fastboot access and no idea how to get out of this situation.
I've tried to flash a custom recovery so that at least I could flash a rom, but whenever I try to fastboot it over I get an error saying "FAILED <remote: not allowed>". So if I can't flash a recovery ROM, and I can unlock my bootloader again, and I can't boot into a ROM, what can I do. I spent the last 6 hours trying to find an answer and I'm totally out of options now.
Click to expand...
Click to collapse
You device most likely can't downgrade due to having a locked device. Have you tried flashing the 2.07 ruu
Thank you for all of the replies. Actually the change of the CID command might have worked but I didn't see that reply before I had tried another method found in this thread: http://forum.xda-developers.com/showthread.php?t=2570548.
I was truly stuck in fastboot and couldn't flash a custom recovery at all. Well I used the advice from a previous thread and edited the firmware .zip posted in the first post of this thread: http://forum.xda-developers.com/showthread.php?t=2314771. I had initially tried to flash the .zip posted but when I tried to boot into the recovery it wouldn't work. So I opened the .zip file without extracting it and removed the recovery.img from the .zip, I then took the TWRP custom recovery and inserted it into the .zip (if you extract the zip this will not work; you need to use software that can edit a zip without extracting it. On the Mac, which I was using, I used Spring). I renamed the TWRP recovery to "recovery.img" to match what I had previously deleted.
Then I flashed this edited firmware.zip by using the following command in usb fastboot mode (here's the link for my edited file):
fastboot oem rebootRUU
fastboot flash zip YOUREDITEDFILE.zip
fastboot reboot
This then allowed me to boot into recovery. I thought I had figured it out and could now sideload a ROM using the "adb sideload" command and flash some type of ROM that would boot. This failed miserably; it would allow me to push the file, but the install would always fail before it completed.
So then I found this thread here: http://forum.xda-developers.com/showthread.php?t=2570548. I first flashed the two .zip files that were posted in post #44. then I flashed the full RUU posted in post #1. This gave me a bootable stock ROM. Praise God!!!
Finally I went back to this thread: http://forum.xda-developers.com/showthread.php?t=2293919, and flashed the following code.
Code:
adb devices (your device should be listed)
adb reboot bootloader
fastboot devices (your device should be listed)
fastboot oem writesecureflag 3
fastboot reboot-bootloader
*verify you are locked s-on
fastboot reboot
Not sure why I had such a terrible time, but I'm glad its over and the DNA is finally sold. Thank you for all your help!
trying to restore my dna back to stock
I got my dna locked again and now I am running the ruu file and i am stuck at 6%. Can someone help please!! Tried it by double clicking the ruu file and running it like that, and i also ran it in administration and both ways i am stuck at 6%

Categories

Resources