I ended up in the AT&T forum through scott's cleanrom link, downloaded and installed that version of Paranoid Android which worked minus the cell service.. I realized this and tried to install the Verizon version with still no cell service. I've flashed the Verizon modem, no dice. Recocevered with TWRP to stock with root and still no cell service. I was sure flashing the modem would have fixed it..
Any advice would be greatly appreciated!
fixed:
ok so I flashed to my nandroid of Cleanrom and a pop-up appeared prompting me to "switch to global mode" I said ok and the network reconnected.. phew.
Get the hidden menu enabler tool and do ##rtn# from the hidden menu, then get the phone info app for the s3 and use it to force cdma/evdo/lte mode
WarlockLord said:
Get the hidden menu enabler tool and do ##rtn# from the hidden menu, then get the phone info app for the s3 and use it to force cdma/evdo/lte mode
Click to expand...
Click to collapse
Could you explain to me exactly where to get the hidden menu enabler and the phone info app? are they in the playstore? I saw hidden menu enabler in the playstore but wasnt sure if that was what I needed. and what are the steps to get cdma/lte working? Thanks!!
cnotes2019 said:
Could you explain to me exactly where to get the hidden menu enabler and the phone info app? are they in the playstore? I saw hidden menu enabler in the playstore but wasnt sure if that was what I needed. and what are the steps to get cdma/lte working? Thanks!!
Click to expand...
Click to collapse
here you go
http://forum.xda-developers.com/showthread.php?t=2077653
And this method will help me get back CDMA/lte service on my note 2 running beans rom? I get signal bars but no data. I have my IMEI intact but dont have a eri. Not sure what that is but it's not available under settings. Thanks !
att rom
zodduska said:
I ended up in the AT&T forum through scott's cleanrom link, downloaded and installed that version of Paranoid Android which worked minus the cell service.. I realized this and tried to install the Verizon version with still no cell service. I've flashed the Verizon modem, no dice. Recocevered with TWRP to stock with root and still no cell service. I was sure flashing the modem would have fixed it..
Any advice would be greatly appreciated!
fixed:
ok so I flashed to my nandroid of Cleanrom and a pop-up appeared prompting me to "switch to global mode" I said ok and the network reconnected.. phew.
Click to expand...
Click to collapse
do you have the modem file ?
I made the same mistake the other day except I flashed an N7105 aosp rom. Same thing it booted but borked my cell service. I had a backup of the stock rom that I restored to then had to go to settings, mobile networks and click lte/cdma and my service came back.
zodduska said:
I ended up in the AT&T forum through scott's cleanrom link, downloaded and installed that version of Paranoid Android which worked minus the cell service.. I realized this and tried to install the Verizon version with still no cell service. I've flashed the Verizon modem, no dice. Recocevered with TWRP to stock with root and still no cell service. I was sure flashing the modem would have fixed it..
Any advice would be greatly appreciated!
fixed:
ok so I flashed to my nandroid of Cleanrom and a pop-up appeared prompting me to "switch to global mode" I said ok and the network reconnected.. phew.
Click to expand...
Click to collapse
Have you tried to odin flash back to stock? This may work....you'll lose root access + phone will be locked again.
I'm glad you fixed.
I can't hold it back.... I have to say this and I hope you understand.
You are a complete idiot.
Sent from my SCH-I605 using xda premium
Related
Hi,
First post on XDA so bare with me on this.
Have flashed my TELUS Note 717D with a few different ROM's over the last few days. With the news that Sammy will be pushing out official ICS in the next week or so I am trying to get my Note A$S back to stock including the correct radio file.
This is where I have come unstuck. I have all the correct files but for some reason I can't get my LTE back. Yes it was working prior to my loading new ROM's and also after I went testing. Had the soft bricking issue yesterday & managed to get that resolved but since then no LTE nada.
Loaded the full TELUS recovery (found here http://forum.xda-developers.com/showthread.php?t=1585440 ) and then the TELUS kernel.
Still no LTE. I have the GB & ICS radio files & now can’t get the recover to load any zip files as I get a error at the first screen.
Any help would be greatly appreciated.
Mike
I went thru this yesterday... i
I flashed the ATT stock rom/system from these boards, then downloaded the three part Telus file..when assembled its about 1 Gb...
After flashing ATT, I cleared dalvik, flashed the Telus stock.. Then i did a factory reset, and i was back.
I'm still running a non stock modem file.. But all is functioning.
Sent from my SGH-I717D using XDA
getting LTE now?
Everything is working but the lack of LTE is missing.
I am in downtown Vancouver & out address has a in building LTE system so coverage is not a problem.
Can you confiem that you have LTE? do you have the isp.telus.com apn too?
Mike
still having issues
I can flash the AT&T ROM with no problems using odin. when I reboot into recovery I am getting a error that wont allow me to use the power button and select the reset option.
The power button works because I can press and hold to reboot the phone but the white triangle with ! mark is in the moddle of the screen. With out that I am unable to do the resetting & clearing of the cache.
Any thoughts?
telephonemike said:
I can flash the AT&T ROM with no problems using odin. when I reboot into recovery I am getting a error that wont allow me to use the power button and select the reset option.
The power button works because I can press and hold to reboot the phone but the white triangle with ! mark is in the moddle of the screen. With out that I am unable to do the resetting & clearing of the cache.
Any thoughts?
Click to expand...
Click to collapse
Yeah.. Unfortunately my skillset definitely into the "knows just enough to be dangerous" category..
What 'recovery' is currently in the phone? Stock recovery? A CWM type recovery? I ask because I had an issue once previously where the power button wouldn't let me select items.. but I was able to use one of the four soft buttons on the bottom front of the phone to execute the same command. Once it was the 'home' button.. on my current recovery software it's the search button oddly enough.
What happens when, from the phone dialpad after a normal boot, you key : *#2263# ?
Do you get the Band preference menu?
What's selected? What happens if you pick 4 (LTE) and then 7 (LTE ALL) ?
And have you done a factory reset on the phone after any of these flashes? (I didn't see where you had so I askl)
Lastly -- in the SETTINGS / WIRELESS & NETWORK / MOBILE NETWORKS menu.. do you have "NETWORK MODE" menu item that the stock Canadian i717 device has the AT&T device does not?
I'll add here as a postscript.. it may not matter ... if the update includes an updated radio file.. all this worrying over it may not much matter once the update comes?
knoxster said:
Yeah.. Unfortunately my skillset definitely into the "knows just enough to be dangerous" category..
What 'recovery' is currently in the phone? Stock recovery? A CWM type recovery?
I have CWM v5.5.0.4 installed which works but wont let me installed the radio file. Bombs out with errors.
When I flash the TELUS stock GB Kernel, I get the standard recovery which wont even let me see the radio file.
What happens when, from the phone dialpad after a normal boot, you key : *#2263# ?
I thought this was a At&t thing only? But that said I did try to the number and got a recorded annc saying that is was not a valid number.
Do you get the Band preference menu?
Yes I have the correct options and its set to use all the HSPA types & LTE too.
And have you done a factory reset on the phone after any of these flashes? (I didn't see where you had so I askl)
Yes I did the reset to factory in CWM after the At&t ROM flash and after I loaded the TELUS ROM too. I did had to load a different kernel to allow the CWM recovery but then installed the TELUS stock kernel after.
I'll add here as a postscript.. it may not matter ... if the update includes an updated radio file.. all this worrying over it may not much matter once the update comes?
Click to expand...
Click to collapse
Thanks for all the help so far
Mike
Well, I have the same CWM .. I can't flash any of the supposedly flashable CWM modem files.. errors out part way thru. Weird.
I'm uploading my Telus Stock image that I used to Google drive.. I'll pm you the link once its up.
Sent you the links.
Also -- I managed to get the Bell Radio CWM file loaded on my Telus device from the thread located in this forum. (STOCK BELL thread)
There is now a Rogers stock thread and hopefully they'll have a Telus thread that will have a modem file that loads as well as the Bell one did. I can't imagine the differences are that great.
success
we have LTE!!!
Huge thanks for your help here. Flashing the BELL LTE radio file has now enabled the LTE in my telus note.
A little embarrassing as I work at telus but shhhhhhhhhhhhhhhh.
XDA Dev site is the best for anything Andriod.
telephonemike said:
we have LTE!!!
Huge thanks for your help here. Flashing the BELL LTE radio file has now enabled the LTE in my telus note.
A little embarrassing as I work at telus but shhhhhhhhhhhhhhhh.
XDA Dev site is the best for anything Andriod.
Click to expand...
Click to collapse
Yay!... See? Occasionally the blond leading the blind .. something good can come from it!
Plus I managed to get my modem back to stock as well .. I was using that T769 modem that was tweaked for Note use.. and all the Telus CWM modem files I would try to flash in ...just errored out.
I talk to Rogers and apparently there's the 401 sim that's not lte capable. They told me to go back to the store to get the 403 sim with lte capable, maybe that should help fix the problem. I'll give an update tmr once I get the new sim.
Does anyone know where I can find the Rogers radio or modem file? I found the radio but it says installation aborted when I try to flash CWM. I flash the Rogers modem file and the log shows me a installation success but it's i717M which is Bell, not Rogers. Can anyone give me a proper Rogers working link? also, apparently Radio and Modem is the same thing, it's just people playing with words, or I'm I getting it wrong? Thank you.
andronikal659 said:
I talk to Rogers and apparently there's the 401 sim that's not lte capable. They told me to go back to the store to get the 403 sim with lte capable, maybe that should help fix the problem. I'll give an update tmr once I get the new sim.
Does anyone know where I can find the Rogers radio or modem file? I found the radio but it says installation aborted when I try to flash CWM. I flash the Rogers modem file and the log shows me a installation success but it's i717M which is Bell, not Rogers. Can anyone give me a proper Rogers working link? also, apparently Radio and Modem is the same thing, it's just people playing with words, or I'm I getting it wrong? Thank you.
Click to expand...
Click to collapse
Why do you ask when you have already posted in that thread?
http://forum.xda-developers.com/showthread.php?p=26232608#post26232608
Agoattamer said:
Why do you ask when you have already posted in that thread?
http://forum.xda-developers.com/showthread.php?p=26232608#post26232608
Click to expand...
Click to collapse
sorry. I wasn't sure I was at the right forum. should I delete the post? btw how do I get alert for reply that people made after me instead of bookmarking every page? Thanks.
Here is the link to the Rogers Modem, http://www.mediafire.com/?ol9yzmmjx8uayh5
you can always flash your modem using adb to push the back to the phone just follow this thread
http://forum.xda-developers.com/showthread.php?t=1506212
Thanks guys. I'll stick with the .zip files to flash in CWM for now as I'm not comfortable with adb yet. One missing letter and it can fail to boot or whatever...
My network settings switched to gsm, they should be "cdma", im sprint cust and live in US. Ill change setting back to cdma, as soon as I back out 1 screen then go back in the setting will have auto changed back to gsm. I tried to do a recovery and phone would not load recovery (fail). I have found out that the install_recovery.sh file is nowhere on the phone. I just tried unlocking bootloader which was successful and then flashed cwm 5.0.2.7photon3 and sunfire-user-2.3.4-4.5.1A-1_SUN-198-7-CM-release-keys-signed-Sprint-US. Also cleared phone a few times and anyway booted up then and it was still auto switching itself to gsm after Id change it to cdma. Im stumped, could anyone help me, or does any1 possibly have idea what might be causing this. I also tried flashing radio from "halfevildruid" thread, that did not work either. PLEASE HELP, WOULD REALLY APPRECIATE THANKS. I hope I posted in correct place, sorry if not. I looked around for quite awhile so it would be in correct place.
*#*#4636#*#*
Select "Phone information"
scroll down to "Select preferred network type" and select CDMA Auto (PRL)
Reboot
Q-In settings/about phone what is you PRL?
Q-Which radio did you flash?
Also install_recovery.sh removes CWM on every reboot and replaces it with stock recovery. So do you want a locked phone or unlocked phone? If you want unlocked then you do not want install_recovery.sh.
Have you tried to flash the stock sbf and starting over?
Lokifish Marz I will get info and post back shortly, thanks for the quick reply.
reply
Lokifish Marz said:
*#*#4636#*#*
Select "Phone information"
scroll down to "Select preferred network type" and select CDMA Auto (PRL)
Reboot
Q-In settings/about phone what is you PRL?
Q-Which radio did you flash?
Also install_recovery.sh removes CWM on every reboot and replaces it with stock recovery. So do you want a locked phone or unlocked phone? If you want unlocked then you do not want install_recovery.sh.
Click to expand...
Click to collapse
Thanks you for the reply Lokifish,
I hope I am replying back the correct way ( hitting the quote button), anyways I have now got the cm 9 6282012 installed on phone and seems to be working good except my phone is still set on gsm and when Im going to apn's there is no info there it is blank. I went into phone info #*#*4636*#*# and change the setting to "cdma auto prl" and reboot the phone and its still on gsm. I have noticed something in the forums, should I flash the beta 3.1 cm9 file? (which I have not done, but I have flashed the gapps file though) and if so should that be done after flashing the cm9 6282012?
by the way im running cm9 and I go into settings/ about phone/ I don't find any prl. nor do I find it in the *#*#4636#*#* either. Would greatly appreciate any help please
still stuck
mquezada21 said:
Have you tried to flash the stock sbf and starting over?
Click to expand...
Click to collapse
Thanks for the reply As far as I know I had thought that this was the original SBF, do you know if that is correct?
1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_6-CM-release-keys-signed-Sprint-US.sbf Anyways I had tried this file but didn't have any luck.
As of now I have cm9 installed and running except for my sprint cdma network, I do have wifi. but in apn settings it is just blank.
I have a question along the same line. I recently rooted my mopho, keep having an issue installing bootstrap recovery. It seems to continually load when I try to install recovery. Also superuser keeps denying access to system recovery install. Idk if it had to do with the continually loading or if it's a separate issue. I even went in and allowed access with no help still. I'm tring to keep 4g, so I'm staying locked for the time being. Just such a pain, coming from htc evo 4g & 3D.... Never again will I buy moto. Should have done some research before buying. Any help is greatly appreciated.
Sent from my MB855 using xda app-developers app
Hi,
I've updated the phone to the newer firmware from KIES, and the phone was connected to the WIFI network but signal connection keeps switching on and off, is there anyway to fix this issue so I can have a stable connection?
Have test with my iPhone and Ipad, both connectect to the same WIFI and only my samsung S3 having this problem.
PS: WIFI power saver mode is already <<off >>, keep Wifi on during Sleep mode is set to <<always>>, Network notification is <<un-tick>>
This is my current ROM (Rooted)
AP: I9300BUBLG3
CP: I9300BULG2
CSC: I9300VFGBLG3
settting > wireless & network > more > mobile network > automatic connections > sprint connection optimizer.. unchecked?
This is the international version is Samsung S3, I can't find such settings.
Sent from my GT-I9300 using xda app-developers app
I had the same issue when I reverted to stock. I thought it was this and that but really, all I did was
Backed up everything
Well mine was rooted and stuff so I triangled away the flash counter, probally dont need that if your on stock anyways
I wiped everything from the phones settings, back and restore, reset
I then booted up in recovery, doesnt matter if you are cwm or stock recovery, wipe again plus cache
Now I loaded up Odin and flash the original stock rom for my phone, I waited till it was complete, I then updated it through settings till I got to the latest update and then started reinstalling my apps from google play store or whenever else I had apps. So far all is well and no wifi issues.
Other advise would be instead of all the above, wait for another update or flash a new modem. That also worked for me when I was running another countries stock rom, Bad wifi, so I flashed my countries modem and it was fine! so good luck!
go to dialler
*#0011# will take you into Service Mode
click on menu
click on wifi
you will see a button that says "on" click on it
it will say off this stops the wifif connect/dis-connect problem.
If you shut down your phone you have to reset it to off.
jetbruceli said:
I had the same issue when I reverted to stock. I thought it was this and that but really, all I did was
Backed up everything
Well mine was rooted and stuff so I triangled away the flash counter, probally dont need that if your on stock anyways
I wiped everything from the phones settings, back and restore, reset
I then booted up in recovery, doesnt matter if you are cwm or stock recovery, wipe again plus cache
Now I loaded up Odin and flash the original stock rom for my phone, I waited till it was complete, I then updated it through settings till I got to the latest update and then started reinstalling my apps from google play store or whenever else I had apps. So far all is well and no wifi issues.
Other advise would be instead of all the above, wait for another update or flash a new modem. That also worked for me when I was running another countries stock rom, Bad wifi, so I flashed my countries modem and it was fine! so good luck!
Click to expand...
Click to collapse
This was the latest stock rom from KIES update (also rooted). But thanks for the reply, I'll try to flash different ROM and see what will happen.
colint3 said:
go to dialler
*#0011# will take you into Service Mode
click on menu
click on wifi
you will see a button that says "on" click on it
it will say off this stops the wifif connect/dis-connect problem.
If you shut down your phone you have to reset it to off.
Click to expand...
Click to collapse
I already set it <<off>>, still having issue with the wifi.
superfilm968 said:
I already set it <<off>>, still having issue with the wifi.
Click to expand...
Click to collapse
I've got the exact same problem. Do you have a BT Home Hub 3 by any chance?
I've just rooted mine so am going to try and flash a new modem and see if this fixes the issue
jonjuk said:
I've got the exact same problem. Do you have a BT Home Hub 3 by any chance?
I've just rooted mine so am going to try and flash a new modem and see if this fixes the issue
Click to expand...
Click to collapse
Sorry I don't have BT Home HUB 3, my connection is very simple, just connecting the S3 to a DrayTek Vigor2710Vn Router via Wifi. Please let me know the result after you flash with a new modem. If is working, please provide the link and file name where you got your file so I can flash it too.
Thanks!!!!
***By the way, what ROM version are you using at the moment? Please provide your AP, CP and CSC details if is different to my S3. ***
Repeat Modem has nothing to do with WiFi.
jje
I had the exact same issue, but ONLY after rooting the device (which I did just a day or two after I got it). I tried every possible fix, flashed new roms 3 or 4 times, wiped data and everything else in recovery, but no luck.
However, my final solution was to simply follow a guide to unroot the device, which I did today - and it did indeed work, I guess this issue is mainly happening to rooted phones, for unknown reason. Until I know this is fixed with an update (maybe in 4.1 JB), I won't be rooting this device again.
Link to guide on how to unroot
Are there actually people who can't fix it like me?
Also done everything I possible could but never got wifi working again.
Returned it to Samsung. I unrooted it and flashed the firmware again with KIES.
The day after there was also an official update for the BENELUX I guess. Also updated this with KIES.
So is it still possible they see that the modem was changed?
haenraets said:
Are there actually people who can't fix it like me?
Also done everything I possible could but never got wifi working again.
Returned it to Samsung. I unrooted it and flashed the firmware again with KIES.
The day after there was also an official update for the BENELUX I guess. Also updated this with KIES.
So is it still possible they see that the modem was changed?
Click to expand...
Click to collapse
did you reset the flash counter?
haenraets said:
Are there actually people who can't fix it like me?
Also done everything I possible could but never got wifi working again.
Returned it to Samsung. I unrooted it and flashed the firmware again with KIES.
The day after there was also an official update for the BENELUX I guess. Also updated this with KIES.
So is it still possible they see that the modem was changed?
Click to expand...
Click to collapse
Yeah as the guy above me said, you always have to reset the flash counter before unrooting (as this requires superuser access).
If you don't do this, it's easy to see the phone has been modified in either download mode or by checking status in settings.
After successfully unrooting you'll also have to re-enter CWM recovery and wipe data+cache.
After doing this you'll see the device being "normal" and it should show "stock" in download mode.
ph10m said:
Yeah as the guy above me said, you always have to reset the flash counter before unrooting (as this requires superuser access).
If you don't do this, it's easy to see the phone has been modified in either download mode or by checking status in settings.
After successfully unrooting you'll also have to re-enter CWM recovery and wipe data+cache.
After doing this you'll see the device being "normal" and it should show "stock" in download mode.
Click to expand...
Click to collapse
Forgot to mention it but I did this yes.
I also think KIES would not update when this is not a zero.
Ok so ive been running Hyperdrive for a while now without any problem. Today I decided to try Carbon. After flahing and booting I noticed that I had a little white triangle over my signal bars and a roaming notification in my pull down. At this point I have no signal only wifi. Tried restoring both of my nandroids but they boot up with the same problem.. Anyone know how this can be fixed?
Sent from my SCH-I545 using xda app-developers app
more info
Jeff Zaugg said:
Ok so ive been running Hyperdrive for a while now without any problem. Today I decided to try Carbon. After flahing and booting I noticed that I had a little white triangle over my signal bars and a roaming notification in my pull down. At this point I have no signal only wifi. Tried restoring both of my nandroids but they boot up with the same problem.. Anyone know how this can be fixed?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
So, do you still have IMEI in your "about phone" settings? Or all they all zeros or unknowns? Carbon 4.2 or 4.3? You didn't include enough information for me to really be helpful. but, to me it sounds like you lost your IMEI and thus cannot get a signal or APN.
I think it was carbon 4.2. Sorry not a 100% sure though. I've since then oden the me7 update but unfortunately it didnt fix the problem. Oh and yes theres a long number there its not all zeros or unknown
Sent from my SCH-I545 using xda app-developers app
Jeff Zaugg said:
Ok so ive been running Hyperdrive for a while now without any problem. Today I decided to try Carbon. After flahing and booting I noticed that I had a little white triangle over my signal bars and a roaming notification in my pull down. At this point I have no signal only wifi. Tried restoring both of my nandroids but they boot up with the same problem.. Anyone know how this can be fixed?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I too am having this issue. Also from flashing Carbon rom 20130909-0127-jfltevzw.
What I have tried. (with data wipes in between)
Flashing another AOSP rom (CM 10.2 to be exact, latest nightly)
Flashing TW rom
Odin back to stock
Restored TW stock backup
A friends sim card to see if my sim had fried.
My phone as well reports an IMEI and a phone number. I dealt with the S3 issue a few times and the factory format dialer code always worked for me.
Took the phone to a Samsung booth at my local best buy. The guy there (believe it or not) was not an idiot. His phone was running CM as well. He attempted to force the latest update through and he said that his SMART (Samsung Multi something something tool) failed to recognize my device. He said he was able to tell it was flashed at some point (although i feel like this part was BS) and he was able to tell me that some config file or identifier file was missing/corrupt from the device. He recommended a Verizon insurance claim. He said that the SMART software (which according to him is basically a frontend for ODIN) could not identify what device was plugged in.
I investigated the install script for the rom and it appeared normal. I didn't notice any line that modified anything outside of /system.
I cannot apply the update the my phone grabs. I am still on MDK. The update will begin to flash and get about 2/3 done then fail (I believe it says verified failed) and then reports a error code 402 back to the OS once it reboots.
IMEI is present and valid. ERI is 5. PRL is 15233. Phone number is present and valid. IMEISV is 00.
Any suggestions or help is greatly appreciated.
erismaster said:
I too am having this issue. Also from flashing Carbon rom 20130909-0127-jfltevzw.
What I have tried. (with data wipes in between)
Flashing another AOSP rom (CM 10.2 to be exact, latest nightly)
Flashing TW rom
Odin back to stock
Restored TW stock backup
A friends sim card to see if my sim had fried.
My phone as well reports an IMEI and a phone number. I dealt with the S3 issue a few times and the factory format dialer code always worked for me.
Took the phone to a Samsung booth at my local best buy. The guy there (believe it or not) was not an idiot. His phone was running CM as well. He attempted to force the latest update through and he said that his SMART (Samsung Multi something something tool) failed to recognize my device. He said he was able to tell it was flashed at some point (although i feel like this part was BS) and he was able to tell me that some config file or identifier file was missing/corrupt from the device. He recommended a Verizon insurance claim. He said that the SMART software (which according to him is basically a frontend for ODIN) could not identify what device was plugged in.
I investigated the install script for the rom and it appeared normal. I didn't notice any line that modified anything outside of /system.
I cannot apply the update the my phone grabs. I am still on MDK. The update will begin to flash and get about 2/3 done then fail (I believe it says verified failed) and then reports a error code 402 back to the OS once it reboots.
IMEI is present and valid. ERI is 5. PRL is 15233. Phone number is present and valid. IMEISV is 00.
Any suggestions or help is greatly appreciated.
Click to expand...
Click to collapse
Pretty sure I'm having the same issue. I updated from an older carbon nightly to the latest and now my device won't activate in any ROM.
I have fixed this issue.
I flashed the latest cm nightly again WITHOUT THE SIM CARD INSERTED TO THE DEVICE. Went into settings > more... > mobile networks > changed CDMA subscription to NV. Reboot phone with the Sim in the phone now. Go back to mobile networks. If it hasn't changed back to RUIM/SIM subscription do so now. Reboot again. Device should be working again.
For me messages came I'm after changing back to RUIM/Sim but I had no signal reported. Rebooting brought that back.
Hope this helps someone.
Sent from my Nexus 7 using xda app-developers app
erismaster said:
I have fixed this issue.
I flashed the latest cm nightly again WITHOUT THE SIM CARD INSERTED TO THE DEVICE. Went into settings > more... > mobile networks > changed CDMA subscription to NV. Reboot phone with the Sim in the phone now. Go back to mobile networks. If it hasn't changed back to RUIM/SIM subscription do so now. Reboot again. Device should be working again.
For me messages came I'm after changing back to RUIM/Sim but I had no signal reported. Rebooting brought that back.
Hope this helps someone.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I can confirm this worked for me with the latest Carbon. Thanks for the help, nice to have a network connection again, lol.
erismaster said:
I have fixed this issue.
I flashed the latest cm nightly again WITHOUT THE SIM CARD INSERTED TO THE DEVICE. Went into settings > more... > mobile networks > changed CDMA subscription to NV. Reboot phone with the Sim in the phone now. Go back to mobile networks. If it hasn't changed back to RUIM/SIM subscription do so now. Reboot again. Device should be working again.
For me messages came I'm after changing back to RUIM/Sim but I had no signal reported. Rebooting brought that back.
Hope this helps someone.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much, this worked like a charm for me, except i used a Carbon stable release instead of CM
hiya guys,
I've been having a lot of problems the past couple days..
I ordered my note 3 straight from Sprint. When I got it, I flashed custom recovery and flashed Freezas stockish ROM. The phone came loaded with NAB so I installed the
NAB version of the ROM, well there was some missing menus in settings, like tethering and such.. So I flashed stock nc5 and flashed his engineering boot loader. Ugraded my firmware to nc5. Flashed the nc5 version of the ROM and still the same settings.. No WiFi calling in settings, no tethering options at all.. I got curious and decided to flash KitKatkiller to see if it had the same problems, it was the same thing in the settings in kitkatkiller except it showed the ROM manager and stuff that was added into the ROM. But was missing tethering.. I hit WiFi hotspot in the toggle like I did on freezas ROM and it said hotspot not supported..
But josh's ROM is deodexed with that mod included.
What is going on?
Try this
Johnnysauur said:
hiya guys,
I've been having a lot of problems the past couple days..
I ordered my note 3 straight from Sprint. When I got it, I flashed custom recovery and flashed Freezas stockish ROM. The phone came loaded with NAB so I installed the
NAB version of the ROM, well there was some missing menus in settings, like tethering and such.. So I flashed stock nc5 and flashed his engineering boot loader. Ugraded my firmware to nc5. Flashed the nc5 version of the ROM and still the same settings.. No WiFi calling in settings, no tethering options at all.. I got curious and decided to flash KitKatkiller to see if it had the same problems, it was the same thing in the settings in kitkatkiller except it showed the ROM manager and stuff that was added into the ROM. But was missing tethering.. I hit WiFi hotspot in the toggle like I did on freezas ROM and it said hotspot not supported..
But josh's ROM is deodexed with that mod included.
What is going on?
Click to expand...
Click to collapse
Similar things have happened for me, I've found that un-rooting doing a factory reset back to stock OEM rom then rooting again and flashing your preferred custom rom fixes things.
Hope this helps,
Topaz
topaz91385 said:
Similar things have happened for me, I've found that un-rooting doing a factory reset back to stock OEM rom then rooting again and flashing your preferred custom rom fixes things.
Hope this helps,
Topaz
Click to expand...
Click to collapse
I'll try that. Out of curiosity I opened a phone up at work to see if it had tethering on stock and the note 3 I opened had the same settings my note 3 has.. So I dont know what the problem is.. I wonder if those settings dont show up unless the phone is activated on the network.
Sent from my SPH-L710 using XDA Free mobile app
Re
Yeah not sure about Stock rom if it had tethering setting or not I always flash custom right away.
Johnnysauur said:
I'll try that. Out of curiosity I opened a phone up at work to see if it had tethering on stock and the note 3 I opened had the same settings my note 3 has.. So I dont know what the problem is.. I wonder if those settings dont show up unless the phone is activated on the network.
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
Tethering and hotspot are both in my stock rom tho they don't work they are in setting
People in g2 forum had same thing. ... If the phone was never activated on sprint it would not have tether ....
Sent from my SM-N900P using Xparent BlueTapatalk 2
I have the exact same issue...
No hotspot & tethering in menu/connections....
Any solution?
You guys might try here http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159
Hi guys I know your problem.
Csc stuff needs stock recovery to be proberly applied in my experience. I can factory reset phone to different csc (XAS for example) and have sprint hotspot and usb tethering options removed from menu.
Set csc to SPR and power off phone. Power back on to stock recovery and you should see something along the lines of "applying csc SPR"
If menus have not been added at this point factory reset may be in order with correct csc applied.
Once you have these menus added in THEN odin the custom recovery you want.
Good luck!
idone said:
Hi guys I know your problem.
Csc stuff needs stock recovery to be proberly applied in my experience. I can factory reset phone to different csc (XAS for example) and have sprint hotspot and usb tethering options removed from menu.
Set csc to SPR and power off phone. Power back on to stock recovery and you should see something along the lines of "applying csc SPR"
If menus have not been added at this point factory reset may be in order with correct csc applied.
Once you have these menus added in THEN odin the custom recovery you want.
Good luck!
Click to expand...
Click to collapse
Thanks for reply Idone
I used galaxytool.apk it shows XAS
Actually it(SM-N900P) is flashed to Reliance CDMA here in india to use it with RCDMA RUIM
Device is Stock, as it can be seen in status.
Someone told me that it is not activated on Sprint so no boot logo of sprint & no tethering & Hotspot option without activation on sprint,
My device's rom is NC5 Stock Rooted
I m new to all this, so pls suggest me step by step guide to get hotspot option.
https://www.dropbox.com/s/5m36ajooqx6f2ur/Screenshot_2014-09-10-14-47-01.png?dl=0
Thanks
If your phone is flashed to another carrier and you didn't do it yourself you probably just want to leave it how it is.
XAS wont display sprint boot and power down animations. The phone comes with 4 different ones. sprint, samsung, boost, and virgin that can all be set. XAS gives you the samsung one.(like debranded phone)
But yea unless you know the process to setup the phone for reliance or have someone who can do it again for you I would advise to leave it alone.
But if you are brave take an nv backup in dfs or qpst's software download (even better would be to dd these partitions [mmcblk0p12 13 &18]) and only then take the steps I mentioned previously with the stock recovery. Alternately get a nandroid from someone on the same software version. You will probably want to have sprintdm.apk removed to be safe. Either way take nv backup before moving forward especially if you don't know how to flash a phone to reliance.
**edit**
Go into apn's and write down your settings for them. and BE ADVISED the "enable hotspot" in my app is for phones on Sprint only!
Once you get the menu items added we (should hopefully) be able to enable them.
idone said:
If your phone is flashed to another carrier and you didn't do it yourself you probably just want to leave it how it is.
XAS wont display sprint boot and power down animations. The phone comes with 4 different ones. sprint, samsung, boost, and virgin that can all be set. XAS gives you the samsung one.(like debranded phone)
But yea unless you know the process to setup the phone for reliance or have someone who can do it again for you I would advise to leave it alone.
But if you are brave take an nv backup in dfs or qpst's software download (even better would be to dd these partitions [mmcblk0p12 13 &18]) and only then take the steps I mentioned previously with the stock recovery. Alternately get a nandroid from someone on the same software version. You will probably want to have sprintdm.apk removed to be safe. Either way take nv backup before moving forward especially if you don't know how to flash a phone to reliance.
**edit**
Go into apn's and write down your settings for them. and BE ADVISED the "enable hotspot" in my app is for phones on Sprint only!
Once you get the menu items added we (should hopefully) be able to enable them.
Click to expand...
Click to collapse
Hello Idone
Sorry for getting too late in reply!!
I have changed its csc to SPR through galaxyapktools
I have opened it selected SPR and tap install.
But nothing added in MENU(HOTSPOT & TETHER)
There is two folders added named Sprint & Sprint featured, But both are blank
As i tap those folders, it shows + mark to add apps in these folders.
Any suggesation?
Thanks
mahesh.yadav said:
Hello Idone
Sorry for getting too late in reply!!
I have changed its csc to SPR through galaxyapktools
I have opened it selected SPR and tap install.
But nothing added in MENU(HOTSPOT & TETHER)
There is two folders added named Sprint & Sprint featured, But both are blank
As i tap those folders, it shows + mark to add apps in these folders.
Any suggesation?
Thanks
Click to expand...
Click to collapse
Yes see my post here http://forum.xda-developers.com/showpost.php?p=55720274&postcount=165
You need to boot once to stock recovery to have these menus added properly.
Let me know how it goes!
idone said:
Yes see my post here http://forum.xda-developers.com/showpost.php?p=55720274&postcount=165
You need to boot once to stock recovery to have these menus added properly.
Let me know how it goes!
Click to expand...
Click to collapse
oops!!!
Mistake...
I have changed its NV to "RUIM only" after changing it to SPR.
I have rebboted in stock recovery right now.
Pressed powe+volume up+home button
Get into stock recovery
Pressed power button to reboot....
But no luck....
Should i have to change CSC again through galaxytool.apk/Preconfigure/SPR/INSTALL?
It's now showing SPR as i can see in preconfigure.
Thanks
mahesh.yadav said:
oops!!!
Mistake...
I have changed its NV to "RUIM only" after changing it to SPR.
I have rebboted in stock recovery right now.
Pressed powe+volume up+home button
Get into stock recovery
Pressed power button to reboot....
But no luck....
Should i have to change CSC again through galaxytool.apk/Preconfigure/SPR/INSTALL?
It's now showing SPR as i can see in preconfigure.
Thanks
Click to expand...
Click to collapse
Odin stock tar for the exact software version you are on now and then reboot to recovery. If mps_code is set to SPR before odin'ing the tar you will get these menus added.
Hello @idone
I have read in xda LG G2 forums that replacing carrier folder of unactivated phone with sprint activated devices enable csc features.
If this can be done with SM-N900P?
Thanks