Related
Currently I'm trying this guide:
Nook Tablet "One Click Root" + gapps ADB script
but I've been trying various guides all day. The drivers are there, debugging enabled, auto mount disabled, robot in the bottom corner but when I run ADB Devices, no dice. Anyone have any clues what the problem could be or atleast anyone else having this problem? At first I thought it might be because I was using a different USB cord but it still doesn't work even with the Nook cord
The problem you describe is almost guaranteed to be a problem on your computer and the driver installation.
For the folks here to help, they will need to know platform (PC or mac) and version of operating system.
If Windows, they will need to know how the device appears to Device manager. If it shows up as a disk drive - you will have to disconnect from the Nook side. ADB Composite should be good.
For either platform, confirm that adb_usb.ini is in the right place and modified correctly.
No, you're wrong dude above me.
OP: Run this in cmd prompt
Code:
echo 0x2080 > %username%\.android\adb_usb.ini
You need to have your nook tablet unplugged when you run that then you would see nook tablet in the device manager when you plug it back in.
Indirect said:
No, you're wrong dude above me.
OP: Run this in cmd prompt
Code:
echo 0x2080 > %username%\.android\adb_usb.ini
Click to expand...
Click to collapse
"Cannot find the path specified." But I can locate the file myself in that directory??
I'm running Windows 7 64-bit, device shows up as android phone>androud ADB interface.
My bad it's
Code:
echo 0x2080 > "%USERPROFILE%\.Android\adb_usb.ini
Check, still nothing in ADB, i did restart the server too. To be clear, the .ini file only has the "0x2080" line in it now, nothing else. I'm assuming that's ok because the other stuff was commented out anyway, am I right?
(thanks for your help! )
1) look in device manager now though, you need to install the drivers.
I still see it listed under android phone > android ADB interface and not mass storage or anything like that, you think that's still the problem though?
*Edit*
SUCCESS!! I uninstalled the "Android ADB Interface" and "Android Composite ADB Interface" appeared in its place!!(??) Whatever happened the device show up now. Thanks for the help and keep up the good work Indirect!
Indirect said:
My bad it's
Code:
echo 0x2080 > "%USERPROFILE%\.Android\adb_usb.ini
Click to expand...
Click to collapse
I was having problems seeing the Nook Tablet in adb devices, but this fixed it for me.
I was having the same issue for a bit, restarted my nook and it worked haha.
Sent from my BNTV250 using xda premium
This worked for me. Hopefully it helps.
While the nook is plugged in (mine showed the 2 "Disk Drives" and 2 Drive Letters under portable devices). Open Device Manager and delete/remove the 2 disk drives called "B&N NOOK Tablet USB Device" (this should also remove the weird drive letters under portable devices). Now go to Control Panel > Advanced System Settings > Hardware Tab > then click "Device Installation Settings". Change this setting to "No, let me choose what to do", and make sure "Never install driver software from Windows Update" is checked below that.
Now unplug and replug your NT, and you should now see an Android Composite device with the "!" next to it. You should now be able to install the custom drivers described in the other posts.
Essentially it seems windows is trying to "help" you by guessing at the drivers you want to use.
If this doesn't work, you can try to remove ALL android devices using the USBDeview Application that you can find http://www.androidsim.net/2009/08/how-to-1-how-to-install-usb-driver-on.html
I used USBDeview for the removal part just because I had a Kindle fire, HTC device, samsung device, all installed and I think they were fighting a little bit. I now have results from adb devices, and dare I say ROOT!?!?!
Hope this helps some of you!
Good post - Windows Vista especially, and Windows 7 somewhat, really think they know better than the user when it comes to drivers. Especially unsigned drivers in preference to signed ones...
I found that the best way to do this for people with this problem (such as me), is to go in Device Manager, expand the USB Mass Storage Device selection, search for the USB Mass Storage device of your Nook Tablet (easiest way would be to unplug any other external hd, sd card, ... so that there is only one USB Mass Storage device). At this point, right click and update driver and select the folder manually.
tsubus said:
I found that the best way to do this for people with this problem (such as me), is to go in Device Manager, expand the USB Mass Storage Device selection, search for the USB Mass Storage device of your Nook Tablet (easiest way would be to unplug any other external hd, sd card, ... so that there is only one USB Mass Storage device). At this point, right click and update driver and select the folder manually.
Click to expand...
Click to collapse
I just joined the forum to thank you! I spent hours looking for a solution and yours worked!
brices21 said:
While the nook is plugged in (mine showed the 2 "Disk Drives" and 2 Drive Letters under portable devices). Open Device Manager and delete/remove the 2 disk drives called "B&N NOOK Tablet USB Device" (this should also remove the weird drive letters under portable devices). Now go to Control Panel > Advanced System Settings > Hardware Tab > then click "Device Installation Settings". Change this setting to "No, let me choose what to do", and make sure "Never install driver software from Windows Update" is checked below that.!
Click to expand...
Click to collapse
Well I am stumped here, seriously. I can't get rid of the above mentioned 2 instances of "B&N NOOK Tablet USB Device" no matter what I do. Auto mount is off on the device and the device installation setting is already set to "No, let me choose what to do." Yet every time I plug the NT in- the computer kindly tells me it's "ready for use" and those two "B&N NOOK Tablet USB Device" listings are back. At this point I'm not sure I'm ever gonna be able to get the device to show up under ADB. The computer just won't seem to let it.
Any advice anyone might on this would be greatly, greatly appreciated.
maybe try what Indirect did here: http://forum.xda-developers.com/showthread.php?t=1363652
The website is below what I did to completely disable Windows from installing the Nook drivers every time it is plugged in. I also had the "Never install driver software from Windows Update" checked from Brices21's post but the drivers would still install everytime it is plugged in.
xxxx = http - still a noob, can't post links
yyy = www
xxxx://yyy.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/
I never actually installed the USB drivers that indirect provided, but "adb devices" still detected the NT when plugged in.
This was my whole process to get "adb devices" to detect the NT:
With the NT plugged in and device manager detecting the 2 Nook devices as drives and 2 Nook devices in "other devices" and with automount disabled and USB debugging enabled
I also ran the runmefirst.bat at some point in time previously, so the necessary files were created already
***** Pulled this from the website above******
* Go to Start–>Search type in gpedit.msc
* Click the file to open the Local Group Policy Editor and show Windows who is in control!!
* You want to go here: Computer Configuration->Administrative Templates->System->Device Installation. Click on the subfolder Device Installation on the left and on the right side you will see the possible restrictions.
* Right Click on Prevent Installation of Devices not described by other policy settings and edit this option, set it on ENABLED.
*************************************
From here the website says to reboot and set the option back to default. I did not reboot or set the option back.
* Going back into device manager, I uninstalled the drivers for the 2 Nook drive devices.
* Unplugged the NT
* Plugged the NT back in
Then I got the B&N NOOK Tablet USB Device with the broken symbol under "Other devices" in Device Manager
* Open cmd and run "abd devices" from the ntroot directory
The service should start and list the NT device as a bunch of numbers.
* From here you can run NookandZergy.bat to root the NT.
After rooting you can set the options in the gpedit.msc back to defaults.
I also tried installing the Indirect provided drivers as the USB mass storage device. Windows then detected the device as an Android ADB Composite device but "adb devices" from cmd prompt would not detect the NT. I ended up removing all of the drivers and repeating my steps to get "adb devices" to detect it again.
Hope this helps! It may not be the best solution but it was a workaround for me to get the NT rooted.
****Update*****
Just got home and tried to install the drivers and it worked this time. I was able to see the NT with "adb devices"
With the gpedit.msc edit intact, I plugged in the NT and Windows detected 2 broken Nook devices under "other devices" and a mass storage device under USB controllers.
* I uninstalled the driver for the mass storage device
* set the gpedit.msc back to "not configured"
* unplugged NT
* made sure debug mode was set and automount disabled
* plugged NT back in
Device manager showed a Mass Storage device under "Other devices"
* Update drivers for that device with the Indirect usb driver
* ran "adb devices" in cmd prompt and NT is detected.
So if there's anything to take away from my post...hopefully you can use the gpedit.msc to completely disable the autoloading of drivers.
Drivers Fixed!
Rooted! Got past driver issues (Android Composite ADB Interface appeared in Device Manager, adb still couldn't detect Nook). Thanks to all who have worked so many hours on this.
Here's what worked for me (using Windows XP 32 bit):
1. make sure "adb_ini" file contains "0x2080" and is located at "%USERPROFILE%\.android"
2. I had to manually edit my "path=" environment variable to include the above location - both in Control Panel->System->Advanced->Environment Variables and in cmd window.
3. carefully followed instructions on proper installation of drivers for "Android Composite ADB Interface". At this point, cmd window use of adb was able to detect Nook (as well as runmefirst.bat).
4. Continued with root process (i.e. NookandZergy.bat)
Hope this helps anyone still having driver issues.
Never had this issue using the trick mac method.
(I cannot post links at this time, a quick Google Search or a look at the Topic titled "Full Root")
The goal of this guide:
I rooted my family members Nook last night but got hung up for a few hours trying to get the ADB Drivers enabled. This is how I made it work. This guide will be expanded and improved once I have my own Nook Tablet (Jan 12th).
Things you need:
• Nook Tablet (Duh)
• USB cord to go between NT and Windows PC
• PC with Windows installed (Tested on XP and x64 Windows 7)
• TGPS_Launcher.apk Installed to your Nook
• ADB USB Drivers for Nook Tablet Extracted to C:\Ntroot on your PC
• USBDeView open on the Windows PC
Step 1:
Ensure that your Nook is version 1.4.0 and not 1.4.1. (I will expand this step later when I have a nook in my hand, I suggest a Google search if you do not know how to do this)
Step 2:
Find this thread on your Nook and download the TGPS_Launcher.apk to your device, then install it. This is well covered in many other threads. (Will expand this step when I have a nook in my hand)
You should now be able to allow USB Debugging, and disable Auto Mount. These settings can sometimes change without your permission, so always uncheck and recheck them to ensure they are properly set.
Step 3:
Plug in your Nook to your PC. Your nook should still respond to your commands, if it tell you in USB Mass Storage mode, then retry Step 2.
Go into your Device Manager. If your Nook shows up with a yellow explanation mark indicating an Error, then you’re in business and really don’t need this guide. All you need to do is update drivers from the file C:\Ntroot. However, assuming that your Nook shows up under Disk Drives and USB Mass storage, then ADB wont be able to see your Nook, please keep reading.
Step 4:
Time to start the USBDeview utility. This utility will open to a list of almost all the drivers your computer has for USB Devices. We are going to uninstall a few of them, namely anything that says “Android” “Nook” or in my case, “Motorola”. You do not need to remove any that specify ADB.
Near the top right hand side, you can sort drivers by when the device was last connected. Do this, then remove any utilities used when you plugged your nook in. Done? Ok, time to see if your work was for nothing.
Step 5:
Make sure once again that USB Debugging is turned on for your Nook. Unplug the Nook, then Unchecked USB Debugging and Check it again. Now plug your device back in and check in Device Manager. You will hopefully see one of two things:
A: You will see your nook with a yellow error icon next to it, which means you just need tell it to update from C:\Ntroot.
B: At the top of the device manager you will see Android Devices, and your nook will show up as Android Composite ADB Interface
If your Nook is still showing under disk drives and mass storage, then try steps 3 and 4 again. Still having trouble? Do a factory reset and try again from step 1.
You should now be able to run your rooting program!
(I feel this should be in the Dev forum, but this is my first post and I was not allowed. Perhaps a mod would like to move this topic?)
I plan on purchasing my own Nook on the 12th on Jan, at which point I will add pictures and expand on my guide. This guide is written from memory and will be edited and improved.
Please consider this guide an Alpha Version
Good write up!
The procedure worked fine on my laptop. When I did it on on my home PC I forgot to disable auto-mount and the Nook installed itself as mass storage. I was able to right click -> un-install all the USB Mass Storage entries (with the Nook unplugged), disable auto-mount, plug the Nook back in, and have it show up correctly.
In short, I did not need to use "USBDeView" as I was able to remove the diveres manually. I suppose if you have more than a handful for USB devices (I just have a Mouse, Keyboard, and printer) "USBDeView" might be helpful to determine which drivers to un-install...
The device manager is enough for most people, but there is a somewhat large number of us that are having trouble still. Possibly because of other devices we have installed before. (I dont understand how all the drivers work and I wont pretend to)
Some people have go so far as putting a fresh install on Windows on a partition of a PC.
I had this problem with both my laptop and my desktop, which surprised me. This worked on both the laptop and PC, so hopefully it can help other people.
I cant wait to get my own tablet on the 12, I will take lot of pictures and make this process more user friendly.
I did all of the steps several times and I still get WPD Driver for the portable device and mass storage for my Nook Tablet. I am guessing I am up a river without a paddle right now.
I will try it in Linux and/or try it on someone's Windows machine.
I am trying to install the drivers from Google's SDK package. So I browse to the correct folder, but device manager says "windows could not find driver software for your device".
Any suggestions? Is there any other set of drivers specifically for NT?
mtelesha said:
I did all of the steps several times and I still get WPD Driver for the portable device and mass storage for my Nook Tablet. I am guessing I am up a river without a paddle right now.
I will try it in Linux and/or try it on someone's Windows machine.
Click to expand...
Click to collapse
Did you sort by last time plugged in and delete all of those too? Have you re-checked and then re-un-checked automount/usb debugging and such?
This is interesting, you'll have to come back and let me know if you ever get it working on your PC. Maybe its a good excuse for a nice healthy re-format and reinstall of windows?
l3ft3r1s said:
I am trying to install the drivers from Google's SDK package. So I browse to the correct folder, but device manager says "windows could not find driver software for your device".
Any suggestions? Is there any other set of drivers specifically for NT?
Click to expand...
Click to collapse
I don't know if they are different, but I used the drivers specificly from the thread about rooting the NT. [I would post a link, but I'm typing from my phone]
You have the yellow error mark next to your device? If so you've almost got it!
The_Joe said:
I don't know if they are different, but I used the drivers specificly from the thread about rooting the NT. [I would post a link, but I'm typing from my phone]
You have the yellow error mark next to your device? If so you've almost got it!
Click to expand...
Click to collapse
Yeap, that did the trick, thanks. Drives installed successfully this time, but adb devices still returns nothing.
Thats very odd. It shows up in device manager as an ADB device?
If so, please try the NookandZergy file, then copy the results so we can try to farther assist
What devices have you rooted before?
I cannot help but feel I will be 100x more useful in a week when I have my device in hand...
adb error: device offline
This drove me nuts for at least a day. Turns out it is what happens when you are plugged into a USB 3.0 port on your PC side. Find out which USB is 2.0 (Front Panel for ZT Systems), use it and life suddenly gets really good.
The_Joe said:
Thats very odd. It shows up in device manager as an ADB device?
If so, please try the NookandZergy file, then copy the results so we can try to farther assist
What devices have you rooted before?
I cannot help but feel I will be 100x more useful in a week when I have my device in hand...
Click to expand...
Click to collapse
At last, after many different things I tried, I am getting a response to adb devices!
I tried disabling and uninstalling usb devices, uninstalling java 7 and installing java 6, re-installing android sdk, at last it worked. Sorry, I can't guess what the problem was :/
l3ft3r1s said:
At last, after many different things I tried, I am getting a response to adb devices!
I tried disabling and uninstalling usb devices, uninstalling java 7 and installing java 6, re-installing android sdk, at last it worked. Sorry, I can't guess what the problem was :/
Click to expand...
Click to collapse
The problem is sdk uninstall and use ccleaner to clean your PC and registries. Use the drivers provided in this forum
Sent from XDA using one of my Android Toys
Edited post to: Sorry to bother anyone, I found the problem. Thank you all for helping!
Well I have done everything and still get permission denials for copying and chmod on my Nook Tablet.
Took the Nook to work and tried it on a fresh machine. Everything went great. Drivers installed and everything ready for usb debug and non-automount and then I run into the same permission errors and being denied access to the folder for Zerk and no chmod.
Same issue no matter what machine. What is wrong with my tablet? I am re-rooting it from being automatically upgrade to 1.4.1. I get it to 1.4.0 with the SD card restore.
LadyPenley said:
Edited post to: Sorry to bother anyone, I found the problem. Thank you all for helping!
Click to expand...
Click to collapse
In the future don't delete your original, just post an edit with the fix. That way when someone else has a similar problem your post can help.
Sent from my BNTV250 using xda premium
mtelesha said:
Well I have done everything and still get permission denials for copying and chmod on my Nook Tablet.
Took the Nook to work and tried it on a fresh machine. Everything went great. Drivers installed and everything ready for usb debug and non-automount and then I run into the same permission errors and being denied access to the folder for Zerk and no chmod.
Same issue no matter what machine. What is wrong with my tablet? I am re-rooting it from being automatically upgrade to 1.4.1. I get it to 1.4.0 with the SD card restore.
Click to expand...
Click to collapse
Did you find a solution? Thats a problem I sadly dont know how to help with. I would start with:
-Check USBDeview and delete anything android/Nook/usb related. Delete just about everything.
-Restart the device
-Uncheck and recheck the USB Debugging boxes
-Recheck and uncheck the auto-mount box
-Test
-Try a different USB Port
-Try another PC
Thanks but didn't work.
thanks, Joe. I did exactly as you mentioined below and had the Android/Nook appear at the top of the Devices listing. However, the adb command still can't find the device. Any suggestions?
Stan White
*****************
The_Joe said:
(I cannot post links at this time, a quick Google Search or a look at the Topic titled "Full Root")
The goal of this guide:
I rooted my family members Nook last night but got hung up for a few hours trying to get the ADB Drivers enabled. This is how I made it work. This guide will be expanded and improved once I have my own Nook Tablet (Jan 12th).
Things you need:
• Nook Tablet (Duh)
• USB cord to go between NT and Windows PC
• PC with Windows installed (Tested on XP and x64 Windows 7)
• TGPS_Launcher.apk Installed to your Nook
• ADB USB Drivers for Nook Tablet Extracted to C:\Ntroot on your PC
• USBDeView open on the Windows PC
Step 1:
Ensure that your Nook is version 1.4.0 and not 1.4.1. (I will expand this step later when I have a nook in my hand, I suggest a Google search if you do not know how to do this)
Step 2:
Find this thread on your Nook and download the TGPS_Launcher.apk to your device, then install it. This is well covered in many other threads. (Will expand this step when I have a nook in my hand)
You should now be able to allow USB Debugging, and disable Auto Mount. These settings can sometimes change without your permission, so always uncheck and recheck them to ensure they are properly set.
Step 3:
Plug in your Nook to your PC. Your nook should still respond to your commands, if it tell you in USB Mass Storage mode, then retry Step 2.
Go into your Device Manager. If your Nook shows up with a yellow explanation mark indicating an Error, then you’re in business and really don’t need this guide. All you need to do is update drivers from the file C:\Ntroot. However, assuming that your Nook shows up under Disk Drives and USB Mass storage, then ADB wont be able to see your Nook, please keep reading.
Step 4:
Time to start the USBDeview utility. This utility will open to a list of almost all the drivers your computer has for USB Devices. We are going to uninstall a few of them, namely anything that says “Android” “Nook” or in my case, “Motorola”. You do not need to remove any that specify ADB.
Near the top right hand side, you can sort drivers by when the device was last connected. Do this, then remove any utilities used when you plugged your nook in. Done? Ok, time to see if your work was for nothing.
Step 5:
Make sure once again that USB Debugging is turned on for your Nook. Unplug the Nook, then Unchecked USB Debugging and Check it again. Now plug your device back in and check in Device Manager. You will hopefully see one of two things:
A: You will see your nook with a yellow error icon next to it, which means you just need tell it to update from C:\Ntroot.
B: At the top of the device manager you will see Android Devices, and your nook will show up as Android Composite ADB Interface
If your Nook is still showing under disk drives and mass storage, then try steps 3 and 4 again. Still having trouble? Do a factory reset and try again from step 1.
You should now be able to run your rooting program!
(I feel this should be in the Dev forum, but this is my first post and I was not allowed. Perhaps a mod would like to move this topic?)
I plan on purchasing my own Nook on the 12th on Jan, at which point I will add pictures and expand on my guide. This guide is written from memory and will be edited and improved.
Please consider this guide an Alpha Version
Click to expand...
Click to collapse
whitets said:
thanks, Joe. I did exactly as you mentioined below and had the Android/Nook appear at the top of the Devices listing. However, the adb command still can't find the device. Any suggestions?
Stan White
*****************
Click to expand...
Click to collapse
I had literally this exact same problem the 6th time I restored and flashed. IF im right, you just need to uncheck then recheck usb debugging.
Let me know if it works!
downloaded all the stuff from the thread. everything went smoothly. i watched the video step by step. after uploading the usbdrivers to my NT it said
"Android ADB interface" instead of "android composite ADB interface"
it shows up in my device manager as a nook tablet still.
i derped. so i thought it would be ok anyways and then tried to zerg rush the baster-ahem NT only to see that the Zerg didn't even find my device.
i promptly decided to just wipe everything from my nook and start fresh but also every single thing i tried has failed to get rid of that blasted "android ADB device" from the one click unroot thing to doing a 8 step reset thingy and just plainly reset and wipe data from the stock settings, and now many hours later i have had enough and decided to swallow my pride and flaunt the noob card. i need help. i must find a way to wipe everything or maybe i can take a step from here. i dunno. derpy derp.
windows 7 ultimate 64bit
nook tablet 8 gb sd card.
(^^this is how people write these things right?)
wagon_burner said:
downloaded all the stuff from the thread. everything went smoothly. i watched the video step by step. after uploading the usbdrivers to my NT it said
"Android ADB interface" instead of "android composite ADB interface"
it shows up in my device manager as a nook tablet still.
i derped. so i thought it would be ok anyways and then tried to zerg rush the baster-ahem NT only to see that the Zerg didn't even find my device.
i promptly decided to just wipe everything from my nook and start fresh but also every single thing i tried has failed to get rid of that blasted "android ADB device" from the one click unroot thing to doing a 8 step reset thingy and just plainly reset and wipe data from the stock settings, and now many hours later i have had enough and decided to swallow my pride and flaunt the noob card. i need help. i must find a way to wipe everything or maybe i can take a step from here. i dunno. derpy derp
windows 7 ultimate 64bit
nook tablet 8 gb sd card.
(^^this is how people write these things right?)
Click to expand...
Click to collapse
hm... well not sure if this is hidden anywhere in your description but did you try reinstalling the nook tablet drivers? since you have android adb device right now, uninstall that and if windows prompts you to restart you should do that. When you uninstall the adb drivers if there is a checkbox saying delete driver software for this device make sure to check that as well. basically what i am trying to say is you want to start fresh as in there should not be any reference to android or nook on your windows pc
another program that may be helpful is using usbdreview which is a program that monitors all devices with usb drivers. this may help is attempting to delete any reference to android and nook on your windows pc. hope this helps!
EDIT: just to add this tidbit in, if your having troubles with ADB, chances are it has nothing to do with your NT but rather with the drivers that Windows has installed already. There's a guide to installing ADB correctly, here's a link:
http://forum.xda-developers.com/showthread.php?t=1424563
ShinnAsuka said:
hm... well not sure if this is hidden anywhere in your description but did you try reinstalling the nook tablet drivers? since you have android adb device right now, uninstall that and if windows prompts you to restart you should do that. When you uninstall the adb drivers if there is a checkbox saying delete driver software for this device make sure to check that as well. basically what i am trying to say is you want to start fresh as in there should not be any reference to android or nook on your windows pc
another program that may be helpful is using usbdreview which is a program that monitors all devices with usb drivers. this may help is attempting to delete any reference to android and nook on your windows pc. hope this helps!
EDIT: just to add this tidbit in, if your having troubles with ADB, chances are it has nothing to do with your NT but rather with the drivers that Windows has installed already. There's a guide to installing ADB correctly, here's a link:
http://forum.xda-developers.com/showthread.php?t=1424563
Click to expand...
Click to collapse
thanks for the reply, tried it. i tried the process and my computer said itfound drivers for my device but couldn't install new drivers on my android ADB interface.
same problem i had previously.
wagon_burner said:
thanks for the reply, tried it. i tried the process and my computer said itfound drivers for my device but couldn't install new drivers on my android ADB interface.
same problem i had previously.
Click to expand...
Click to collapse
hm.. well if it keeps on auto installing generic drivers you will need to disable auto installation of drivers by windows. try looking through each of these links and see if it solves your problem. fyi you should uninstall all drivers relating to android and nook before proceeding
http://www.addictivetips.com/window...tomatic-driver-installation-in-windows-vista/
http://www.addictivetips.com/windows-tips/disable-windows-update-device-driver-search-prompt/
hope this helps
ShinnAsuka said:
hm.. well if it keeps on auto installing generic drivers you will need to disable auto installation of drivers by windows. try looking through each of these links and see if it solves your problem. fyi you should uninstall all drivers relating to android and nook before proceeding
hope this helps
Click to expand...
Click to collapse
well this is weird one atleast for me. i had all those settings on at the very start of the rooting process. and in the end i need to enable in the system config the USER to override the automatic driver install policy. so my anti install was thwarting me this entire time!!! ugh!!! total noob but we all gotta start somewhere. thanks to everyone for helping me out!
Hello All,
So there is very little documentation on the PX102 online as of yet, let alone AOCOS products in general (at least on english sites which I have scoured). First off, I'm currently using OSX 10.6.8 and have the current Android developer tools package that was downloaded from their site about three hours ago (just to be clear). The PX102 is running 4.1.1 and the tablet is a fresh restore (I had a number of apps downloaded but considered that some may have been interfering...).
I will be attempting to root via psneuter exploit from SuperOneClick v2.3.3, however in the terminal when I execute "adb devices" it returns "List of devices attached" with blank space underneath...
I have tried to kill/restart server, run "adb usb", and a couple other small things to no avail.
Yes, usb debugging mode is enabled as well.
I would really like to attempt/execute this all via OSX, however name an OS and I have it at my disposal...
I admit- I am a noob in various ways, especially to android as this is my first android device. Hoever, I also consider myself to be rather self sufficient in terms of sourcing knowledge and troubleshooting, which is why I humbly ask for guidance in this endeavor.
Also, feel free to ask me any questions about the PX102 (via PM only please! I dislike threads being fuddled with asides...).
I'm not seeing too many people claiming to have these tablets though there is quite a bit of interest in them.
Anyone?
For windows you can try rkbatchtool v1.5 to get the correct drivers
Rooted mine
I rooted mine, wasn't easy though.
First problem, you need a adb driver that works on this rockchip tablet that doesn't have a built in ADB driver. Also I didn't have much luck on the chinese language AOCOS forum.
The only way I found to get one is:
1) download and install the morborobo phone manager software from moborobo.com. Yes this is a risk to your pc. God knows what else it did to my pc.
2) let IT find a driver. It will download and install two unsigned drivers.
3) those drivers aren't enough. You need to generate adb_usb.ini in c:/Users/%username%/.android/adb_usb.ini (if you're on windows 7)
Installing the SDK does that automatically otherwise you need to run "android update adb" or something to generate it
4) put the vendor id at the end of adb_usb.ini in the case of AOCOS the vendor is 0x2207
I tried using a premade adb_usb.ini with all of the vendor ids. That didn't work. It worked when I put the right on only.
NOTE, that vendor ID exists nowhere online. I had to find it by reading it directly from the device using USBVIEW from http://digital.ni.com/public.nsf/allkb/335A90747734097886257070006415B9
5) Now you should have a working adb driver. Plug the machine in and type "adb devices". It should see yours
6) now comes the rooting.
Follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=1886460
The script is here: http://uploaded.net/file/0fpyh5c5
the videos showing how are here http://forum.xda-developers.com/showthread.php?p=33470626#post33470626
Note there IS a hacked adb driver that doesn't need a vendor ID, BUT it doesn't work for rooting, it's too old to have the restore feature you need for a jelly bean root.
The PX102 is cool, but mine has some problems:
1) the keyboard charge connector is bad, I have to send it back
2) the battery sucks... I'm sending back the tablet too, hopefully that will fix it
3) never drop one of these, mine only fell a couple feet and it's flaky now. :/
4) the camera is fake. It's not the 2mega pixels it says. It's super low quality and maybe vga. They put in bull**** fractal interpolation software to try to fake higher res
The keyboard is no where near as nice as a transformer, the tablet only rests on the keyboard and can fall off.
Still it's a nice machine. I have my memory cards formatted ext2 (from a previous tablet). I can mount them but the machine won't boot with an ext2 card plugged in. I have to take the card out, boot the machine, then plug it in and mount it.
I even managed to install GNU Gcc/ gnu tools
You can also try this: http://www.androidtablets.net/forum/rockchip-rk3066-tablets/46964-root-your-rockchip-3066-a.html
Or this: http://valentijn.sessink.nl/?p=382
Ok, I'm just going to ask it...
How do I set up SDK and ADB on my 3rd generation HDX 8.9. I find quite a few sets of instructions from 2011 but nothing seems up to date. And android studio is installing the driver in amazon.com which seems weird.
This is the latest I tried--here
I've searched and searched--I've tried several of these with no luck getting the pc to recognize the kindle.
Please no hateful replies--I've been at this for 2 days and I or really wouldn't ask.
Links would be really useful.
Thank you
Unless you are developing, you do not need android studio, jdk, or anything else. All you need to to do is download the sdk.
From here I am going to assume you are on Windows. Probably win 8 or 8.1?
Extract the sdk to a folder where you have write access.
Now find the folder called platform-tools in the sdk folder.
Now, in the Windows explorer bar, select all the text and type cmd
If you do this right, it will open a command window in the platform- tools folder.
If that is confusing, you can go to the sdk folder and then open the command prompt from the start window. Then type cd and drag the platform-tools folder to the command window.
Right now, all the devs are crying, because these are lazy shortcuts, but they work and save you from adding this folder to your path which is better programmatically, but a bit more involved.
Anyway, now you are where you need to be so, type
Code:
adb devices
And you should see your device, but, you probably won't. Stay tuned...
Sent from my KFTHWI using Tapatalk
You don't need to install the whole Android Studio suite — just the SDK Tools will suffice.
As for the Kindle Fire drivers...
https://developer.amazon.com/appsan...ing-up-the-ADB-Driver-for-Kindle-Fire-Devices
So, hopefully you got either a printout of your device, or you got a blank line like...
Code:
List of devices attached...
This is because you do not have the driver installed. If you get another error, either you are in the wrong folder, or you did not enable and on your device.
Code:
To enable adb on your device, click on the serial number in settings>device options 5 times and it will give you the developer options. Enable adb is a toggle there.
Alright, now we need the driver. Go to device manager in your computer and delete anything that looks android or kindle in nature. Unhook your tablet and reboot.
Download the HDX toolkit from the developers error forum and try the install drivers tool in it.
Reboot.
Now, making sure you have enabled adb on your device, open up a command prompt in platform-tools, and try the command again.
Code:
Adb devices
You should see your serial number.
If you have any issues, report back. I may have skipped a step or two as I am giving these directions from memory.
Good luck.
~Leko
Whew! Thank you! Doing this now.
Will update
Did I say thank you?!!!!
Update...After extracting the sdk zip file, platform tools is not showing up.
Downloading the installer file now...
Update2...found platform tools
Oh, my bad, I'm on windows 7...
Update--
The kindle died..thanks for all the input! Greatly appreciated:good:
lekofraggle said:
So, hopefully you got either a printout of your device, or you got a blank line like...
Code:
List of devices attached...
This is because you do not have the driver installed. If you get another error, either you are in the wrong folder, or you did not enable and on your device.
Code:
To enable adb on your device, click on the serial number in settings>device options 5 times and it will give you the developer options. Enable adb is a toggle there.
Alright, now we need the driver. Go to device manager in your computer and delete anything that looks android or kindle in nature. Unhook your tablet and reboot.
Download the HDX toolkit from the developers error forum and try the install drivers tool in it.
Reboot.
Now, making sure you have enabled adb on your device, open up a command prompt in platform-tools, and try the command again.
Code:
Adb devices
You should see your serial number.
If you have any issues, report back. I may have skipped a step or two as I am giving these directions from memory.
Good luck.
~Leko
Click to expand...
Click to collapse
So I am stuck adb devices--the line is blank
--ADB is enabled
--USB debugging is checked
--kindle driver installed
--portable device deleted in device manager
--SDK is set up C:\Program Files (x86)\Android\android-sdk\platform-tools
The driver installed in a separate file in program files as amazon.com which looks odd to me.
Maybe my path is wrong?
Update I've tried the method found here but after 2 tries with reboots, I'm still getting MTP device and portable device->fire. Each time i see the last one I delete it, reboot plug in again and portable device appears.
I've also tried Amazon instructions here
Anyone have any ideas?
Thanks in advance!
It sounds like you are on the right track.
Unplug your kindle, delete the devices again, and try this file.
http://forum.xda-developers.com/showthread.php?t=2665683
Use it just to install the drivers. (That is all it can do for you).
Then open a command prompt.
And plug your device in.
.
If the drivers are installed correctly, the path only matters to get adb to work (which the blank line tells you it is).
Also, there is a chance the devices will show up the same after the correct drivers are used. Mtp is able to run aside adb, but on Win 8 anyway, not fastboot (don't worry about fastboot).