Guyz i want to know that can i install Official jellybean of i9100 on my S2 i9100M Bell Canada.....waiting for reply thanx
BaCkkk said:
Guyz i want to know that can i install Official jellybean of i9100 on my S2 i9100M Bell Canada.....waiting for reply thanx
Click to expand...
Click to collapse
Yes, you can install the official 4.1.2 JB firmware released in Spain and other international markets.
Search the forums on how to flash the firmware to your phone.
To point you in the right directions, here are some points:
You will need to use Odin.
Download the official firmware from the links on this forum or sammobile .com
do i have to flash simple PDA file or i have to to give PIT file too with PDA???
dj_aj said:
Yes, you can install the official 4.1.2 JB firmware released in Spain and other international markets.
Search the forums on how to flash the firmware to your phone.
To point you in the right directions, here are some points:
You will need to use Odin.
Download the official firmware from the links on this forum or sammobile .com
Click to expand...
Click to collapse
do i have to flash simple PDA file or i have to to give PIT file too with PDA???
BaCkkk said:
Guyz i want to know that can i install Official jellybean of i9100 on my S2 i9100M Bell Canada.....waiting for reply thanx
Click to expand...
Click to collapse
For the record, throw the 'M' out. You have an i9100. All the 'M' says is you got your phone in Canada. Nothing special about the phone at all.
Sent from my Samsung GT-i9100M
ROM NeatRom Lite 4.2 XWLS8
Kernel Philz 4.22 XWLSD
Mods:
23 toggles blue w/rt clock
Automatic Call Recorder
NeatRom Boot Animation
jebuchanan said:
For the record, throw the 'M' out. You have an i9100. All the 'M' says is you got your phone in Canada. Nothing special about the phone at all.
Sent from my Samsung GT-i9100M
ROM NeatRom Lite 4.2 XWLS8
Kernel Philz 4.22 XWLSD
Mods:
23 toggles blue w/rt clock
Automatic Call Recorder
NeatRom Boot Animation
Click to expand...
Click to collapse
I actually flashed and rooted but i can't get out of it now. I think its due to the m dissappearing. the error i get when i try flashing is in an error in the file and the scripts last step while running is looking for i9100m i9100t i9100. apparently from the looks of it, it wasn't reading the model. this may be due to the fact that this is a new rom but its a bit odd. on speed mod kernel.
Related
I really F'ed up.
I was running ICS on my bell Galaxy S2 but I wanted to try the S3 rom that was released here. (Note that I am somewhat a stupid when it comes to android flashing). I installed a CF-root kernel (phone wasn't CWM at the time) but the phone didn't turn work - it would go to black screen.
So I tried a couple different kernels, nothing worked. Then I went crazy and flashing just about everything. Nothing has changed.
When I turn the phone on, it gets stuck at the Galaxy S II screen. When I go to download mode, it is like usual (no CWM, the standard one). And when I go into recovery, it says "Forced Upload, by key pressing".
What can I do now? I would like to just get the phone working at this point, official firmware that works with kies would be nice. S3 rom would be even better.
Whoever helps me solve this would be my hero. Serious.
EDIT: I am now on clockwork recovery if that helps.
flexmuzik said:
I really F'ed up.
I was running ICS on my bell Galaxy S2 but I wanted to try the S3 rom that was released here. (Note that I am somewhat a stupid when it comes to android flashing). I installed a CF-root kernel (phone wasn't CWM at the time) but the phone didn't turn work - it would go to black screen.
So I tried a couple different kernels, nothing worked. Then I went crazy and flashing just about everything. Nothing has changed.
When I turn the phone on, it gets stuck at the Galaxy S II screen. When I go to download mode, it is like usual (no CWM, the standard one). And when I go into recovery, it says "Forced Upload, by key pressing".
What can I do now? I would like to just get the phone working at this point, official firmware that works with kies would be nice. S3 rom would be even better.
Whoever helps me solve this would be my hero. Serious.
EDIT: I am now on clockwork recovery if that helps.
Click to expand...
Click to collapse
what's your phone model no? GT I9100, GT I9100M, GT I9100P, GT I9100T or GT I9100G?
Jokesy said:
what's your phone model no? GT I9100, GT I9100M, GT I9100P, GT I9100T or GT I9100G?
Click to expand...
Click to collapse
I9100M
flexmuzik said:
I9100M
Click to expand...
Click to collapse
You need to start all over again.
1. Download ICS firmware for BELL 19100M below:
Firmware Info
GT-I9100M - Canada (Bell)
PDA: I9100MUGLD3
CSC: I9100MBMCLD3
Version: 4.0.3
Date: 2012-04-23
Regions:
Download
2.
- Extract the zip file and flash the firmware via Odin.
- Flashing guide
Good luck
Jokesy said:
You need to start all over again.
1. Download ICS firmware for BELL 19100M below:
Firmware Info
GT-I9100M - Canada (Bell)
PDA: I9100MUGLD3
CSC: I9100MBMCLD3
Version: 4.0.3
Date: 2012-04-23
Regions:
Download
2.
- Extract the zip file and flash the firmware via Odin.
- Flashing guide
Good luck
Click to expand...
Click to collapse
Thank you so much. The phone works perfectly now!
If you know how to get it to the S3 rom (or just get the cool gesture features) that would be nice but if not I'll be happy on stock ICS until I learn a lot more about flashing.
flexmuzik said:
Thank you so much. The phone works perfectly now!
If you know how to get it to the S3 rom (or just get the cool gesture features) that would be nice but if not I'll be happy on stock ICS until I learn a lot more about flashing.
Click to expand...
Click to collapse
U'll never can flash different ROM for different device.. it will soft brick ur phone or worse... but u can flash any s3 mods/themes for s2 u reach it at s2 mods/themes section.
Sent from my GT-I9100 using xda app-developers app
If you want to stay safe, always browse i9100/i9100M forums dont get out of it, Seems like you are Newb so much please read all stickies in Q/A and General Thread
[India Only] Wifi Router for Sale [600 INR]
Peace
Hit Thanks & It will Disappear
Sent from S II Running Fully Modified Official ICS 4.0.4
Next Device: Upcoming Nexus
Adam Hui said:
U'll never can flash different ROM for different device.. it will soft brick ur phone or worse... but u can flash any s3 mods/themes for s2 u reach it at s2 mods/themes section.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Too late, I already did. It works really well except most of the new features (motion and all that) is missing .
Still a good ROM though. To clarify, it's the S3 ROM that was modified to fit the S2. I found it through google.
I just want to say thank you to this forum for telling me how to root. get super su, cwm, flash kernals install cool jelly bean roms, even transform my m250s to a i9100 and unlock the sim. now here is my questions how do i transform my cellphone back to an skt m250s(korean version) what kind of roms do i need. i didn't make a backup before the transformation to the i9100. any help would be appreciated or any leads on where to go.
Sorry for the Edit:
I want to go from M250S --->I9100 ---> back to M250S(SKT) NOT M250K(Olleh KT) or M250L(LGU+)
If you want to revert back, go to sammobile.com and download a firmware there flash the .tar file using odin
Sent from my GT-I9300 using xda premium
sammobile only has the files for M250K the one i'm looking for is M250S
if you had spent a few minutes searching by typing this:
Samsung ms250s firmware, it would have led you to :
http://www.apkforandroids.com/samsung-m250s-firmware/
Cosmic Blue said:
if you had spent a few minutes searching by typing this:
Samsung ms250s firmware, it would have led you to :
[ururl]
Click to expand...
Click to collapse
i did spend a few minutes searching. and i did find that file. so instead of assuming help would have been more appreciated. i need the pit file. the pit file i found makes my phone into a olleh kt s2. not an skt s2. i also need the csc tar file. at bootup it still says i9100
you need to be a member of this forum
i found the list of stock firmwares for your model
http://gsmsolution.biz/forum/android_os/9613-korean_shw_m250s_galaxy.html
...and all i did was googling it:victory:
dbswjdgh27 said:
I just want to say thank you to this forum for telling me how to root. get super su, cwm, flash kernals install cool jelly bean roms, even transform my m250s to a i9100 and unlock the sim. now here is my questions how do i transform my cellphone back to an skt m250s(korean version) what kind of roms do i need. i didn't make a backup before the transformation to the i9100. any help would be appreciated or any leads on where to go.
Sorry for the Edit:
I want to go from M250S --->I9100 ---> back to M250S(SKT) NOT M250K(Olleh KT) or M250L(LGU+)
Click to expand...
Click to collapse
Hi! I want to know what kind of procedure did you performed about converting M250S to I9100?
Because i have Galaxy S anycall M110s and maybe you can help me to convert it to i9000.
Thank you!
sent using "Creed 3.5+merruk kernel"
davidroid03 said:
Hi! I want to know what kind of procedure did you performed about converting M250S to I9100?
Because i have Galaxy S anycall M110s and maybe you can help me to convert it to i9000.
Thank you!
sent using "Creed 3.5+merruk kernel"
Click to expand...
Click to collapse
I used the following.
remember to take out the spaces inbetween
wecanfixyour mobile.com/2012/02/sch-m 250s-succesf ully-debrand-to-i9100.html
dbswjdgh27 said:
i did spend a few minutes searching. and i did find that file. so instead of assuming help would have been more appreciated. i need the pit file. the pit file i found makes my phone into a olleh kt s2. not an skt s2. i also need the csc tar file. at bootup it still says i9100
Click to expand...
Click to collapse
I'm having the same issue. After I flash M250S firmware, it boots saying i9100 and stuck there Did you find a solution?
Kasun Anuradha said:
I'm having the same issue. After I flash M250S firmware, it boots saying i9100 and stuck there Did you find a solution?
Click to expand...
Click to collapse
this seem to be a one way trip. i also have a M250S that was converted to i9100 and now im fighting to get it back to M250S. i have the M250K pit file and the i9100 pit file but nothing i do will get the phone to flash via odin back to M250S. maybe i have to use RIFF or MEDUSA box to get it back to normal
I have a Samsung I9300, I'm in the US, and and on T-Mobile, it has the stock ROM, but rooted with Chainfire's CF-Root 6.4. The S3 has downloaded the OTA Jellybean update, and I have postponed it for now. My question is, can I apply the update ? and then just re-root with CF-Root, or will the update fail?
Thanks
I wouldn't apply the ota as it can fail with any root applied incl cf root. You could update through kies and reapply cf root or flash the official firmware for your phone through Odin. If ya need a hand finding out which official firmware ya need do the following:-
Dial *#1234# into your keypad and post results.
Sent from my GT-I9300 using xda premium
It shows:
AP: I9300UBBLG2
CP: I9300UBLG2
CSC: I9300UUBBLG2
I believe that firmware is Brazilian but using sammobile.com to check for brazilian versions I dont see a JB update for any of the brazilian carriers handsets or the unbranded version :/
If u have kies you could do the update through it, it updates the same as if u flash through odin and wont wipe anything. You could also use "checkfus" from playstore it should identify your phone and firmware version and allow u too download.
I had a similar problem, and I thought I could try to get Jelly Bean by flashing a custom Jelly Bean ROM. Now I want to go back to stock ROM (flashed custom ROM's performance is awful), so I downloaded the corresponding stock ROM from sammobile, but what I found was a very large (1,2Gb) tar.md5 file and a SS_Dl.dll file.
So the question; is it normal for it to be that big? and, how do I flash it with odin... which thing goes where? which pit should I use? do I put the 1,2Gb file in PDA? should I tick re-partition? bootloader?? Please, help
(Current ROM is DarkyROM III v6.0, and my android phone is a spanish yoigo i9300, so according to sammobile my stock is I9300XXBLFB_I9300YOGBLF1_YOG)
Myscha said:
I had a similar problem, and I thought I would try a Custom jellyBean ROM. Now I want to go back to stock ROM, so I downloaded the corresponding stock ROM from sammobile, but what I found was a very large (1,2Gb) tar.md5 file.
So the question; is it normal for it to be that big? and, how do I flash it with odin... which thing goes where? which pit should I use? do I put the 1,2Gb file in PDA? should I tick re-partition? bootloader?? Please, help
(Current ROM is DarkyROM III v6.0, and my android phone is a spanish yoigo i9300, so according to sammobile my stock is I9300XXBLFB_I9300YOGBLF1_YOG)
Click to expand...
Click to collapse
Go here - This is a guide for using Odin etc -
http://forum.xda-developers.com/showthread.php?t=1671969
badassballer said:
Go here - This is a guide for using Odin etc -
http://forum.xda-developers.com/showthread.php?t=1671969
Click to expand...
Click to collapse
Much appreciated, I'll try not to break anything
Myscha said:
Much appreciated, I'll try not to break anything
Click to expand...
Click to collapse
No problem! Enjoy!
OK, a slight variation on the question:
S3 I9300 on T-mobile, stock ROM, rooted w/ CF 6.4. Can I use Mobile Odin Pro to flash the JB update that the phone has downloaded (update.zip sitting in /cache) checking everoot to keep root, and do the update this way, rather than using kies to update and the re-root?
And if so, what happens to the CWM recovery that is installed, does it get over written with stock recovery?
Thanks
Hi im a noob. i got my s3 in the past 2 days, i have a problem about my battery.. it last 24 hours or less. im on stock.. how to update or root this phone? anyone could help me.
Android version: 4.0.4
Baseband version: I9300DXLH1
Kernel version 3.0.15-928452
THANKS
iamjavin said:
Hi im a noob... how to update or root this phone? anyone could help me.
Click to expand...
Click to collapse
Hi nOObie, I used to be a [email protected]@b like you but there are a lot of tutorials how to root an s3. Especialy you can search it on Youtube. I followed this tutorial video http://www.youtube.com/watch?v=kbzMHVdV_Vc and got my s3 rooted. You do the same as well.
Cheers
I'm using i9003dxlh1 (rooted) .. Wanted to upgrade to jellybean.. But.... Using software update (in the phone settings) and finish downloaded.. And install.... BUT nothing happens.... But... My message font becoming bigger.... Version of the firmware is still 4.0.4... Pls help
Sent from my GT-I9300 using xda premium
i have galaxy s2 rooted phone
and the triangle still there
Android version 2.3.5
kernel I9100JPKJ2-
i can't find the stock ICS firmware >>>>i have tried Kies and lots of sites >>>
can i use any costum ics rom ?????
and if yes
witch one ???
kilouhm said:
i have galaxy s2 rooted phone
and the triangle still there
Android version 2.3.5
kernel I9100JPKJ2-
i can't find the stock ICS firmware >>>>i have tried Kies and lots of sites >>>
can i use any costum ics rom ?????
and if yes
witch one ???
Click to expand...
Click to collapse
Try sammobile for stock ICS roms
GT-I9100 powered by
NeatRom Lite 4.0
Philz kernal 3.81
Many40's battery tweaks
cnjax said:
Try sammobile for stock ICS roms
GT-I9100 powered by
NeatRom Lite 4.0
Philz kernal 3.81
Many40's battery tweaks
Click to expand...
Click to collapse
there is nothing there
kilouhm said:
i have galaxy s2 rooted phone
and the triangle still there
Android version 2.3.5
kernel I9100JPKJ2-
i can't find the stock ICS firmware >>>>i have tried Kies and lots of sites >>>
can i use any costum ics rom ?????
and if yes
witch one ???
Click to expand...
Click to collapse
If you are just looking for the latest firmware for your phone you can use CheckFus to find and download it.
kilouhm said:
there is nothing there
Click to expand...
Click to collapse
There are hundreds of GT-i9100 firmwares on sammobile.com. from 2.3.3 up to 4.1.2.
ctomgee said:
There are hundreds of GT-i9100 firmwares on sammobile.com. from 2.3.3 up to 4.1.2.
Click to expand...
Click to collapse
i knows that.....
but does all I9100 firmware work with my phone
or
i need a specific one ??
i asked the Q from the first place to know that
kilouhm said:
i knows that.....
but does all I9100 firmware work with my phone
or
i need a specific one ??
i asked the Q from the first place to know that
Click to expand...
Click to collapse
Interesting - 'cause you said "there is nothing there", which seems to contradict that you knew.
But anyways - JPKJ2 appears to be for the Middle East region. So if you care about having Middle Eastern languages, then stick to one from that region.
Otherwise, as long as your phone model is I9100, then it shouldn't matter what region the firmware comes from, as long as it is specifically for an I9100. Just make sure you don't use an I9100G firmware. Though, I have heard of people having issues with firmwares for the China region. I can't speak on that personally though, as I've never tried one.
kilouhm said:
i have galaxy s2 rooted phone
and the triangle still there
Android version 2.3.5
kernel I9100JPKJ2-
i can't find the stock ICS firmware >>>>i have tried Kies and lots of sites >>>
can i use any costum ics rom ?????
and if yes
witch one ???
Click to expand...
Click to collapse
Once u go to Sam mobile u have to use filter like
1 select android
2 smartphone
3 model number
4 your country..
Select appropriate values and u will see list of android versions
Download and flash through odin
Secondly u can also install custom roms
Just do search in question and answer stickies...
Sent from my GT-I9100 using xda premium
Hi,
I need to unroot my Samsung Galaxy S3 and I am unable to find the Stock ROM for my I9300 (India). Do I need to install Stock ROM of any other region. I have checked in Samfirmware already.
Can someone tell me if I'm doing something wrong here?
Grim_R3apeR said:
Hi,
I need to unroot my Samsung Galaxy S3 and I am unable to find the Stock ROM for my I9300 (India). Do I need to install Stock ROM of any other region. I have checked in Samfirmware already.
Can someone tell me if I'm doing something wrong here?
Click to expand...
Click to collapse
Stock 4.1.2 (INU)
Stock 4.1.2 (INS)
I don't know the difference between those two product codes (inu and ins) but both are same version.
RazorMC said:
Stock 4.1.2 (INU)
Stock 4.1.2 (INS)
I don't know the difference between those two product codes (inu and ins) but both are same version.
Click to expand...
Click to collapse
I was looking for Stock 4.3.2
Grim_R3apeR said:
I was looking for Stock 4.3.2
Click to expand...
Click to collapse
Try this: http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=INU#firmware
OR
http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=INS#firmware
Here is the latest version!!
This is the newest MULTI-CSC package!!
*EDITED* Posted wrong link! :/
Sorry!! I posted wrong link by mistake!! THIS is for India!!
CSC-ODD_I9300XWUGML4_I9300ODDGML4_2363855_REV00_user_low_ship
Not registered on network
Getting not registered on network error after every time I reinstall the firmware.Please help me.How to solve that?