Hi,
i have tried the flash of the 2.05 eu rom using goldcard method with flash drive (my mp3 reader).
i have made the goldcard with ETERIMG.nbh and started the phone in USB Host Mode.
The phone read the content, it does not remain in "Enter USB Host MODE" but i have red on the screen (very short time to read info):
"Loading"
"checking"
after that the flash does not start but retrun to spl screen.
What do you thinks is the problem ???
Thank for the help!
hi,
might be the flash drive?...
i made it successfully with T-Flash USB-Card-Reader and SanDisk 2GB Micro-SD
Nothing to do
It start uploading but it fail the check (not allowed), i don't know why.
Hello at all......
I came from Germany, so sorry for my bad english.......
From a Friend, i get an Lenovo A660 Android Phone, this Phone died during an update he made......
Only shows the lying Android with the sign.
I can boot it with luck, but then the Homescreen is lost, i only can make preferences.
I load the custom rom from cybermouse, get into the recoverymode and get a failure message ''not signed''
Then i can find the original rom, but i get the message about boot failure, sometimes i can install from sd card, but nothing happens.
i sit here on osx.........any ideas for an Apple boy, to solve this problem, and recover that phone ?????
Hi, I don't know if this is still up to date, ... anyway:
Theres a step by step instruction in cybermaus thread: http://forum.xda-developers.com/showthread.php?t=1874403
"Instructions:
By default, the ROM will not overwrite USERDATA or FAT. If you want a clean slate, first extract empty.userdata.rar and/or empty.fat.rar
- Read bgcngm flash tutorial.
- Read it again
- Start Flash Tool (v3.1222, in my Dev-Host)
- Load scatter file
- Take out USB cable and replace battery
- Press the download button in the flash tool
- Connect the USB cable
- Wait for the flashing to complete"
The most important thing is: http://bm-smartphone-reviews.blogspot.com/2012/05/mt6575-flashing-tutorial.html
You have to flash your phone first before you can install a custom rom!
(I don't know how to do it on osx... I've done it on Win with my Lenovo A660 and it worked!)
Greetz
At first guys, excuse me if the topic isnt at right place but i cant find the right section.
So i have a Prestigio Multipad 8.0 HD (PMP5588C).I think i have bricked it.I erased NAND with Amlogic Image Burning Tool and now the device wont boot.The screen is black even when im charging it.I wont boot at all.I tried to boot in recovery but no succsess.Ive tried to boot it normally and in recovery (even when i charged it 10 hours usually it charges for 4 hours) but the screen is black.When i connect it with Power and Vol- buttons it shows up in the device manager as M6-CHIP and ive installed the drivers so now is World Cup Device.Ive tried to use Amlogic Image Burning Tool again but it fails on load spl.Any ideas?
Thanks in advance!
Best regards, Stoio.
Im sorry for my English but im from Bulgaria.
Unbrick amlogic tablets
Hello stoio
I have almost the same Tablet. It's a Prestigio PMP5580C, for me it is labeld as Intenso Tab 814, but they are completely the same. I have tried to find the u-boot.bin in the stock firmware, but I didn't sucess yet. I've downloaded several tools which allows me to make my 16 GB MicroSD card recognized as a 512 MB SD card, there I have to put the files on it to unbrick my tablet, it's amlogic (like my username) (someone told me that this is the chipset). It has a TOSHIBA TC58TEG6DCJTA00 NAND flash chip of 8 GB capazity. I also need help by getting my tablet unbricked.
In the future Inwant to learn with this amlogic based tablet how to create custom ROM's, recoveries and custom boot splash screens.
Thanks for any help, I reall appreciate your help,
Please note that I'm from Germany and my English is not good as it should used to be, but I have a dictionary (as a normal book) where I can get good communication with you. I like the idea of using english only.
Every Image (.img) were made with the dd command, I need to look inside in the images and open the content, I used a hex editor and tried to strip off the 2k of data, but I can't success. I'm using this tutorial:
I'm using this hex editor under linux: Okteta
I don't know how to delete the 2k of data. I need to know what content the partitions have to unbrick my amlogic based tablet, cause I'm seeing still the white android robot, and the charging battery or charged plugin picture, but this tablet doesn't have a bootloader or recovery so I'm out of ideas, the only way for me is to use a microsd card like an live cd to automatically let this tablet flash stock firmware, but where is it? Please help me out, I meight be wrong, it's possible that different repairing ways exist, too.
When you sew through flash tool formatted the phone memory and it became polnіm brick-a piece of iron. The computer sees it. Help me find a firmware flash tool for my phone. Tried many times to sew rekoveri through flash tool - there is no phone when I sew. I think it's about a scatter or rekoveri. Thanks for the help, I wait a clue what to do next.
Stock firmware is needed for the phone to flash through the Flash tool
Click to expand...
Click to collapse
HELP
Hello, help revitalize brick !!!! Maya v.1, trying to reallocate memory using meteos-mtk6589-rom-edit-4gb, outcome-brick, with a hard, even the computer does not detect ustroystvo..pytalsya poke through a joint venture flash tulz- campaign formatnul flash and NVRAM ... But !! _ have a backup of all with TWRP helped !!!!. Thanks in advance
: Путать:
Flash Tool saw the phone, try to format fleshtulom - formatted (formatnul and all the RAM and flash), when you try to drive there rekaveri and bottles - draws a mistake, tried to fill in the files of the sink-not the correct firmware skatter..kto give a link to the firmware that would fully pour it through a flash tool !!! PLEASE))
: Путать:
And so I suffer more, again found in the header flash Toole, the new formatted all that you can, try to flash tool pour rekoveri about this oshibka.BROM ERROR S_DL_GET_DRAM_SETTING_FAIL (5054) ..that do next .... error figured -with connect it connects, then falls off the phone-flasher can not properly complete the process ... Guys at Prep is a backup through fleshtul for my phone? IMEI and whatever else I then change my self-important launch. left without a phone, a pancake
By the way when stitching rekaveri in Device Manager first defined as MTC device starts flashing, then turns off and appears as a DA USB VCom port - and immediately the error takes Th for crap .....
Unpack the rom to a folder then unpack SPFT start SPFT, Select and load scatter file from rom folder, press download,Then connect the powered off V785 phone to the usb cable.
Original Stock rom
http://www.mediafire.com/download/hoaken3645l0r3c/ot-V785-2AVDEG1_Original_SPFT_ROM_by_bRkA.7z
flash tool
http://www.mediafire.com/download/q5zrm94o4in1ga8/SP-Flash-Tool-v3.1344.0.212.7z
bricked my vodafone 785
hello...do i have a hard brick {vodafone smart mini 4:crying::crying:}?i flashed wrong boot image then i formatted with sp tools by mistake(i know,dump hey) so now i think my backup is corrupt,most files short...so can u pliz upload a sp flash tool backup plllizz i beg u...or preloader file....thanx
MTK Flash Tool dump of Alcatel OneTouch 4033 ...........Just build prop edit it back to vodafone 785 once flashed if it bugs you. <<<< What is the format of this file ??? OK ARC compressed managed it...
I've got bricked Vodafone 785 and I think only spflash will help me but I don't have any stock rom
Please help ?
EDIT:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
H_C_K said:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
Click to expand...
Click to collapse
Check it out:
gsmpro.com.pl/serwis/item/190-vodafone-785-smart-4-mini-naprawa-firmware-imei-polskie-menu-usuwanie-blokad-root
HEELP!!!
I was trying to put the nav bar (qemu.hw.mainkeys=0) in the build.prop file and rebooted the phone and iit is boot loop. What can I do? I haven´t CWM because I didnt find it, and I dont find the drivers of the phone.
Please help me it is a new phone ( 2 weeks) and my mum wont ever buy me a smartphone anymore .:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Is there a way to get fota updates for this device as a regular download through pc? If so, could someone please point me to the location? I need the latest update zip for this phone (i think from nov/dec 14) in german.
HI, I followed the instructions above, but I can't get the o.s. Just have the clockworkmod recovery now, so the vodafone 785 doesn't start. I also tried to put the backup folder into my extsd but I'm not able to restore the smartphone from the backup you uploaded (from cwm recovery), because it says "no file". Please can you help me?
Does this work? Anyone confirm?
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting.
Link
---------------------------------------------------------
Click to expand...
Click to collapse
Hello guys.
I really need this file to restore my phone can someone reupload it somewhere or pm me a link?
Thanks in advance.
I have a new vodafone smart 4 mini UK PAYG with 4.4.2
and another with 4.2.2.
Cant get it to update to same as other one ie 4.2.2 to 4.4.2
using OTA as both say they are uptodate.
Am newbie.
I guess copy firmware from one to the other somehow
and pass a copy to stock firmware archives.
Phone is DEAD. Don't Flash Flashtool File...
Can anyone explain what is to be done is phone is dead ? Totally confused !
I create fw 4 you
ex.ua/163049604103
Anyone? VF785 stock rom?
suslix78 said:
I create fw 4 you
ex.ua/163049604103
Click to expand...
Click to collapse
Where is the file please I need it.
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fu
" CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting."
Any chance we can get a re-up of this ROM, link is dead. Thanks!
Vodafone smart 4 mini doesn't start
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
wigor75 said:
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
Click to expand...
Click to collapse
somebody please help
there are away by sd card if anyone can plz pm me umor.raihan skype
Thank you very much, it unbrick the phone and add Arabic language
there is Arabic language in it .
this is not working for me what exactly is supposed to happen when you plug in phone?