Hi everyone
Can anybody plz help me I have uninstall OS of Samsung Galaxy Nexus I9250 from Team Win Recovery Project (TWRP) and I have no backup of it to ? can any body plz help me because i am have quite bad feeling of it. I don't care which of data I just want my phone live again. plz help !!!!
Flash a different ROM?
- - - - - - - - - - - - - - - - - - - - - - - - - -
LIFE! A ONE TIME OPPORTUNITY TO MAKE OR BREAK!
@2432%
Lifehacker7 said:
Flash a different ROM?
- - - - - - - - - - - - - - - - - - - - - - - - - -
LIFE! A ONE TIME OPPORTUNITY TO MAKE OR BREAK!
Click to expand...
Click to collapse
but how i gona connect to phone ? there is no OS in it sir
how i gona do communication between my phone and PC ?
softmfq said:
but how i gona connect to phone ? there is no OS in it sir
how i gona do communication between my phone and PC ?
Click to expand...
Click to collapse
May be this works.
Can you get to the recovery? Twrp?
Download the ROM and try to push it via ADB. ( have you enabled debugging?) If it had external card, you could have put the rom on that and put it back. (i know it doesn't have)
- - - - - - - - - - - - - - - - - - - - - - - - - -
LIFE! A ONE TIME OPPORTUNITY TO MAKE OR BREAK!
@2432%
Lifehacker7 said:
May be this works.
Can you get to the recovery? Twrp?
Download the ROM and try to push it via ADB. ( have you enabled debugging?) If it had external card, you could have put the rom on that and put it back. (i know it doesn't have)
- - - - - - - - - - - - - - - - - - - - - - - - - -
LIFE! A ONE TIME OPPORTUNITY TO MAKE OR BREAK!
Click to expand...
Click to collapse
what are the steps for adb plz list them to ....!!!!
this is my big brother phone and he gone kill me for wiping out its OS so plz plz plz help me
man I am doomed
softmfq said:
what are the steps for adb plz list them to ....!!!!
this is my big brother phone and he gone kill me for wiping out its OS so plz plz plz help me
man I am doomed
Click to expand...
Click to collapse
Usb debugging has to be enabled for this to work.
adb tutorial
Make sure you download the correct ROM.
- - - - - - - - - - - - - - - - - - - - - - - - - -
LIFE! A ONE TIME OPPORTUNITY TO MAKE OR BREAK!
To enable usb debugging, if it is not, you also need to learn fastboot. By doing this, you can boot a custom recovery, which in turn enables debugging and adb, which in turn may teach you something if your brother has not yet.
@2432%
bodh said:
To enable usb debugging, if it is not, you also need to learn fastboot. By doing this, you can boot a custom recovery, which in turn enables debugging and adb, which in turn may teach you something if your brother has not yet.
Click to expand...
Click to collapse
it has team win recovery project and from there i was able to get my phone connect via sideload but now another problem that I am facing is that when i push any ROM to phone it usually didn't detect it. Phone is not accepting ROMs. I guess I am skipping MD5 part. What is the purpose of MD5 ? and how i gona use it ?
MD5 verifies the integrity of a file, it is a file hash. What doesn't detect? adb devices does not show connected? Where does sideload push the rom to? Excuse me, but im accustomed to doing things manually.. Im guessing its going to depend on the version of operating system, as well as the version of twrp. Do you have a factory rom from https://developers.google.com/android/nexus/images? I have not yet used twrp either, so excuse me there also.
this thread should fix your issue, at least the no os issue, nevermind your brother's data. http://forum.xda-developers.com/showthread.php?t=1626895
Related
Hello
Flashtool can be downloaded on the Flashtool Homepage
As Flashtool was originally developped for X10, you can find a lot of information on the Original X10 Flashtool thread
Major update for 0.6.8.0 : Ability to now install CWM from Flashtool on locked bootloader for LT15/LT18.
Fastboot now works fine under linux
Major feature for 0.6.5.0 is Linux and Windows editions, Drag&Drop for FTF files.
Major new feature : Fastboot toolbox for 2011 line devices.
Please post fastboot issues here in this thread
hey ppl we have added support for all new Xperia 2011 devices...
Code:
ST17 - coconut - ACTIVE
LT15 - anzu - ARC
LT18 - ayame - ARC S
WT19 - satsuma - LIVE WALKMAN
ST15 - smultron - MINI
SK17 - mango - MINI PRO
MT15 - hallon - NEO
MT11 - haida - NEO V
R800 - zeus,zeusc - PLAY
MK16 - iyokan - PRO
ST18 - urushi - RAY
this update will feature fastboot support!!!
check 1st post for more info and follow link to get latest files!!!
also any issue related to fastboot should be posted in the corresponding device threads...
will make stuff easier for us
hope u guys understand
P.S.: the fastboot toolbox is easy to use... in case some users are having issues using it i will create a small tutorial later...
regards,
DooMLoRD
Thanks for this but it always says that "Device connected with USB debugging off" and in fact USB debugging is ON !!
My device is xperia mini pro SK17i
Rami1987 said:
Thanks for this but it always says that "Device connected with USB debugging off" and in fact USB debugging is ON !!
My device is xperia mini pro SK17i
Click to expand...
Click to collapse
Can you try this :
1 - Exit Flashtool
2 - go to x10flasher_lib folder inside Flashtool install folder and edit driverid.properties
3 - remove all lines except this one : flash1=VID_0FCE&PID_ADDE
4 - Restart flashtool
So now we can flash costum kernels even if we dont have fastboot on device right?
Doomlord you should reall make a tut for this.
Thanks in advance
zousoum96 said:
So now we can flash costum kernels even if we dont have fastboot on device right?
Doomlord you should reall make a tut for this.
Thanks in advance
Click to expand...
Click to collapse
if ur bootloader isnt unlocked then u cant flash kernels...
ok i will make a tutorial for this over weekend...
DooMLoRD said:
if ur bootloader isnt unlocked then u cant flash kernels...
ok i will make a tutorial for this over weekend...
Click to expand...
Click to collapse
how come x10 mini pro can flash kernel with locked bootloader? is it not the same process? if not, would it be possible to flash the way they do?
batjon said:
how come x10 mini pro can flash kernel with locked bootloader? is it not the same process? if not, would it be possible to flash the way they do?
Click to expand...
Click to collapse
those devices have hacked bootloaders to support flashing custom kernels...
since new xperia 2011 device already support fastboot there is no need to hack their bootloaders... simply unlock them... the official or unofficial way
DooMLoRD said:
those devices have hacked bootloaders to support flashing custom kernels...
since new xperia 2011 device already support fastboot there is no need to hack their bootloaders... simply unlock them... the official or unofficial way
Click to expand...
Click to collapse
ah ok, thanks for clarifying.
I'm new to the new mini pro so please pardon my ignorance.. I've been reading through the forum and even though it is possible to unlock the bootloader on a branded phone (like i have), it is not possible to enable fastboot on the branded phone? For people who have this problem is it going to be forever impossible to flash custom kernels?
thanks
Thanks for the info i have unlocked my bootloader with the hardware trick
so now i can flash costum kernels and roms
Thank you Doom so much
Here is a small update that resolves the following issue :
Device not recognized correctly when plugged.
https://github.com/downloads/Androxyde/Flashtool/Flashtool-0.5.1.0-update.exe
Thank you so much for the update.. I will check it up..
Androxyde said:
Can you try this :
1 - Exit Flashtool
2 - go to x10flasher_lib folder inside Flashtool install folder and edit driverid.properties
3 - remove all lines except this one : flash1=VID_0FCE&PID_ADDE
4 - Restart flashtool
Click to expand...
Click to collapse
EDIT: for clarification, I have the same issue with the same phone.
I don't have the driverid.properties file in that folder.
shall I create one? EDIT - I tried that, didn't do ****. Something wrong with my install?
dryhte said:
I don't have the driverid.properties file in there.
shall I create one? EDIT - I tried that, didn't do ****. Something wrong with my install?
Click to expand...
Click to collapse
Install 0.5.0.0 then install 0.5.3 update and you shouldn't have anymore problems.
the driverid.properties file is removed with the 0.5.3 update. No more used.
Androxyde said:
Install 0.5.0.0 then install 0.5.3 update and you shouldn't have anymore problems.
the driverid.properties file is removed with the 0.5.3 update. No more used.
Click to expand...
Click to collapse
I just installed flashtool for the first time, (0.5.0.0 with 0.5.3.0 over it) and I had the same issue, that flashtool does not recognize my usb debugging settings.
dryhte said:
I just installed flashtool for the first time, (0.5.0.0 with 0.5.3.0 over it) and I had the same issue, that flashtool does not recognize my usb debugging settings.
Click to expand...
Click to collapse
once your device is plugged, go to Help -> Check drivers and give me the output please ?
Androxyde said:
once your device is plugged, go to Help -> Check drivers and give me the output please ?
Click to expand...
Click to collapse
Hi,
I changed from MTP to MSC which didn't seem to help at first, but now when I reconnect, more is recognized.
I'll still give you the output:
(with MSC)
Code:
24/006/2011 15:06:15 - INFO - <- This level is successfully initialized
24/006/2011 15:06:18 - INFO - Device connected with USB debugging on
24/006/2011 15:06:20 - INFO - Connected device : SK17
24/006/2011 15:06:21 - INFO - Installed version of busybox : BusyBox v1.18.4 (2011-04-04 18:40:20 CDT) multi-call binary.
24/006/2011 15:06:21 - INFO - Android version : 2.3.3 / kernel version : 2.6.32.9-perf
24/007/2011 15:07:50 - INFO - List of connected devices (Device Id) :
24/007/2011 15:07:50 - INFO - - USB\VID_0FCE&PID_6166\42583930324B43415332: OK
24/007/2011 15:07:50 - INFO - List of ADB devices :
24/007/2011 15:07:50 - INFO - - 42583930324B43415332
24/007/2011 15:07:50 - INFO - List of fastboot devices :
(with MTP)
Code:
24/013/2011 15:13:28 - INFO - Device connected with USB debugging off
24/014/2011 15:14:16 - INFO - List of connected devices (Device Id) :
24/014/2011 15:14:17 - INFO - - USB\VID_0FCE&PID_5166\42583930324B43415332: OK
24/014/2011 15:14:17 - INFO - List of ADB devices :
24/014/2011 15:14:17 - INFO - List of fastboot devices :
I also think a short intro with what you can do with the program, and what types of files you need for that purpose, and what state your phone needs to be in in order to do it all, would help a lot...
EDIT: e.g. how to put the phone in flashmode (I know there's a picture, but it doesn't seem to work for me... probably since my 'back' button is a capacitative button in stead of a proper one)
thanks
dryhte said:
EDIT: e.g. how to put the phone in flashmode (I know there's a picture, but it doesn't seem to work for me... probably since my 'back' button is a capacitative button in stead of a proper one)
thanks
Click to expand...
Click to collapse
we will try n create a list for all devices (flashmode entry, fastboot entry)
dryhte said:
Hi,
I changed from MTP to MSC which didn't seem to help at first, but now when I reconnect, more is recognized.
I'll still give you the output:
(with MSC)
Code:
24/006/2011 15:06:15 - INFO - <- This level is successfully initialized
24/006/2011 15:06:18 - INFO - Device connected with USB debugging on
24/006/2011 15:06:20 - INFO - Connected device : SK17
24/006/2011 15:06:21 - INFO - Installed version of busybox : BusyBox v1.18.4 (2011-04-04 18:40:20 CDT) multi-call binary.
24/006/2011 15:06:21 - INFO - Android version : 2.3.3 / kernel version : 2.6.32.9-perf
24/007/2011 15:07:50 - INFO - List of connected devices (Device Id) :
24/007/2011 15:07:50 - INFO - - USB\VID_0FCE&PID_6166\42583930324B43415332: OK
24/007/2011 15:07:50 - INFO - List of ADB devices :
24/007/2011 15:07:50 - INFO - - 42583930324B43415332
24/007/2011 15:07:50 - INFO - List of fastboot devices :
(with MTP)
Code:
24/013/2011 15:13:28 - INFO - Device connected with USB debugging off
24/014/2011 15:14:16 - INFO - List of connected devices (Device Id) :
24/014/2011 15:14:17 - INFO - - USB\VID_0FCE&PID_5166\42583930324B43415332: OK
24/014/2011 15:14:17 - INFO - List of ADB devices :
24/014/2011 15:14:17 - INFO - List of fastboot devices :
I also think a short intro with what you can do with the program, and what types of files you need for that purpose, and what state your phone needs to be in in order to do it all, would help a lot...
EDIT: e.g. how to put the phone in flashmode (I know there's a picture, but it doesn't seem to work for me... probably since my 'back' button is a capacitative button in stead of a proper one)
thanks
Click to expand...
Click to collapse
The problem is that all these case can be detected by program by I go on step by step and each time someone get stuck, I get some info and I go one step further
My goal is that flashtool will detect correctly how your device is connected and give the advice itself
OK thanks guys (by the way, my phone is not unlocked, maybe that's why I couldn't get to flash mode?)
Hi
I have a x10i and a red light just flashes when i connect the usb to computer or to charger.
I have tried to flash it but i get this error
25/014/2013 20:14:39 - INFO - Device connected in flash mode
25/016/2013 20:16:51 - INFO - Flash canceled
25/026/2013 20:26:40 - INFO - Selected X10i_3.0.1.G.0.75_3-UK_GENERIC_1232-9592.ftf
25/026/2013 20:26:40 - INFO - Preparing files for flashing
25/027/2013 20:27:10 - INFO - Please connect your device into flashmode.
25/027/2013 20:27:11 - INFO - Opening device for R/W
25/027/2013 20:27:12 - INFO - Reading device information
25/027/2013 20:27:12 - INFO - Unable to read from phone after having opened it.
25/027/2013 20:27:12 - INFO - trying to continue anyway
25/027/2013 20:27:13 - INFO - Start Flashing
25/027/2013 20:27:13 - INFO - Processing loader
25/027/2013 20:27:13 - INFO - Checking header
25/031/2013 20:31:37 - INFO - Ending flash session
25/031/2013 20:31:37 - ERROR - Error in processHeader : 995 : The I/O operation has been aborted because of either a thread exit or an application request.
25/031/2013 20:31:37 - ERROR - Error flashing. Aborted
25/031/2013 20:31:39 - INFO - Device disconnected
If you need any more info let me no.
Any help would be great.
lberryman said:
Hi
I have a x10i and a red light just flashes when i connect the usb to computer or to charger.
I have tried to flash it but i get this error
25/014/2013 20:14:39 - INFO - Device connected in flash mode
25/016/2013 20:16:51 - INFO - Flash canceled
25/026/2013 20:26:40 - INFO - Selected X10i_3.0.1.G.0.75_3-UK_GENERIC_1232-9592.ftf
25/026/2013 20:26:40 - INFO - Preparing files for flashing
25/027/2013 20:27:10 - INFO - Please connect your device into flashmode.
25/027/2013 20:27:11 - INFO - Opening device for R/W
25/027/2013 20:27:12 - INFO - Reading device information
25/027/2013 20:27:12 - INFO - Unable to read from phone after having opened it.
25/027/2013 20:27:12 - INFO - trying to continue anyway
25/027/2013 20:27:13 - INFO - Start Flashing
25/027/2013 20:27:13 - INFO - Processing loader
25/027/2013 20:27:13 - INFO - Checking header
25/031/2013 20:31:37 - INFO - Ending flash session
25/031/2013 20:31:37 - ERROR - Error in processHeader : 995 : The I/O operation has been aborted because of either a thread exit or an application request.
25/031/2013 20:31:37 - ERROR - Error flashing. Aborted
25/031/2013 20:31:39 - INFO - Device disconnected
If you need any more info let me no.
Any help would be great.
Click to expand...
Click to collapse
What are you flashing? A custom kernel?
You need an unlocked bootloader
+make sure that drivers are installed
sent via ULTIMATE GB beta
Hi
Thanks for quick reply but i am unsure on what you mean
I have got this phone off a friend it was on 3 network it has never been flashed rooted ETC but he got a new phone and he hasnt used this phone in about a year and when he put it on charge to turn it on it just started flashing red light.
I firstly tried a new battery but no luck
then i got told to use fashtool to flash it using the generic 3 uk firmware, but if you could link me to a guide/tutorial of how and what i need to do it will be greatly appreciated
lberryman said:
Hi
Thanks for quick reply but i am unsure on what you mean
I have got this phone off a friend it was on 3 network it has never been flashed rooted ETC but he got a new phone and he hasnt used this phone in about a year and when he put it on charge to turn it on it just started flashing red light.
I firstly tried a new battery but no luck
then i got told to use fashtool to flash it using the generic 3 uk firmware, but if you could link me to a guide/tutorial of how and what i need to do it will be greatly appreciated
Click to expand...
Click to collapse
It's out of charge! !!!!
Just plug the charger. & wait about 5 minutes then press power button.
Hit;if nothing changed try a new charger, last solution is Sony service center cause its not a software problem.(if you didn't flash a rom)
sent via ULTIMATE GB beta
jay-z-s said:
It's out of charge! !!!!
Just plug the charger. & wait about 5 minutes then press power button.
Hit;if nothing changed try a new charger, last solution is Sony service center cause its not a software problem.(if you didn't flash a rom)
sent via ULTIMATE GB beta
Click to expand...
Click to collapse
Ok thanks for the help ill post back if anything works
http://forum.xda-developers.com/showthread.php?p=28235021
http://forum.xda-developers.com/showthread.php?p=10879507
Hello everyone!
I don't know if this is the right place to post this, but here goes nothing:
I'm trying to update from version 32.0.A.6.152 to 32.0.A.6.200. When it completes downloading the update, it just stops and says: "Could not verify" and no other details.
And yes, I've unlocked the bootloader, if that matters. I'd really love to have the update, is there any workarounds or solutions for this?
Thanks in advance!
E: So there was a subsection for questions too... Silly me. Mods please move?
Kallu609 said:
Hello everyone!
I don't know if this is the right place to post this, but here goes nothing:
I'm trying to update from version 32.0.A.6.152 to 32.0.A.6.200. When it completes downloading the update, it just stops and says: "Could not verify" and no other details.
And yes, I've unlocked the bootloader, if that matters. I'd really love to have the update, is there any workarounds or solutions for this?
Thanks in advance!
E: So there was a subsection for questions too... Silly me. Mods please move?
Click to expand...
Click to collapse
I'm not entirely sure so anyone,correct me if I'm wrong, but I think the reason it won't install is because of root and/or unlocked.
You can download via xperifirm and flash via flashtool.
If u don't know how, try to search a bit because there are plenty of guides about it.
BTW, when u open this thread in browser you can click the triangle "!" button below your post to report it for thread moving.
I could do that too but I prefer to tell you so you can request a moving yourself
langeveld024 said:
I'm not entirely sure so anyone,correct me if I'm wrong, but I think the reason it won't install is because of root and/or unlocked.
You can download via xperifirm and flash via flashtool.
If u don't know how, try to search a bit because there are plenty of guides about it.
BTW, when u open this thread in browser you can click the triangle "!" button below your post to report it for thread moving.
I could do that too but I prefer to tell you so you can request a moving yourself
Click to expand...
Click to collapse
Thanks for the helpful reply! I think that's all I need to hear. Reported post & changed title to solved.
Kallu609 said:
Thanks for the helpful reply! I think that's all I need to hear. Reported post & changed title to solved.
Click to expand...
Click to collapse
I still need some help with the Flashtool. Did I build the .ftf right if I choose everything but the .ta files (following this guide)? Also, which things should I wipe when selecting firmware? There's APPS_LOG, DIAG, SSD and USERDATA.
Also, does this seem like a good output when starting?
Code:
31/044/2015 16:44:53 - INFO - Flashtool Version 0.9.19.8 built on 24-09-2015 22:00:00
31/044/2015 16:44:53 - INFO - Executing search strategies to find proxy selector
31/044/2015 16:44:54 - INFO - No proxy found for IE. Trying next one
31/044/2015 16:44:54 - INFO - No proxy found for firefox. Trying next one
31/044/2015 16:44:54 - INFO - No proxy found for java. Trying next one
31/044/2015 16:44:55 - INFO - Syncing devices from github
31/044/2015 16:44:57 - INFO - Scanning devices folder for changes.
31/045/2015 16:45:17 - INFO - Pulling changes from github.
31/045/2015 16:45:19 - INFO - Devices sync finished.
31/045/2015 16:45:27 - INFO - Device connected with USB debugging off
31/045/2015 16:45:27 - INFO - For 2011 devices line, be sure you are not in MTP mode
31/046/2015 16:46:57 - INFO - Device connected with USB debugging on
31/046/2015 16:46:57 - ERROR - Cannot identify your device.
31/046/2015 16:46:57 - INFO - Selecting from user input
31/047/2015 16:47:08 - INFO - Connected device : E58XX
31/047/2015 16:47:08 - INFO - Installed version of busybox : N/A
31/047/2015 16:47:08 - INFO - Android version : 5.1.1 / kernel version : 3.10.49-perf-g83fc9bc / Build number : 32.0.A.6.152
My device I think is in MTP mode currently, does it affect the flashing?
I'd really appreciate the help, I'm very beginner in flashing roms and don't want to brick my phone.
Hello..
Please Help... i am not very good in sofware but i always keen in learning and XDA forum gave me knowledge best required in android world. With this confidence i had success in rooting galaxy n7000, asus max, galaxy plus ... with sony xperia z2 i was skeptical but i took the challenge, i unlock the phone and followed the steps for rooting "(Tool) (Locked & Unlocked BL) root and recovery for 23.5.A.1.291 WITHOUT downgrade ! by By rocker00," and boom goofed up. I tried to flash ftf stock with flash tool it gives error root access denied. Pulling my hair what to do i tried to figure out but in vain. I send the phone to service centre they say that mother board , battery issue has to be replaced estimated charges so high that i could buy new phone. My gut feeling, this being software issue can be solved. Hence, i plug again to Flash tool where it gave me report as under. The phone does not response to any buttons but when connected the led light red blinks indicating battery charging. the flash tool giving report.... hence its still breathing.. how to make it active and playfull wondering.. Hoping forum can do the magic for me.....
01/041/2017 17:41:54 - INFO - <- This level is successfully initialized
01/041/2017 17:41:56 - INFO - Flashtool Version 0.9.23.1 built on 11-01-2017 15:12:00
01/041/2017 17:41:56 - INFO - Executing search strategies to find proxy selector
01/041/2017 17:41:56 - INFO - No proxy found for IE. Trying next one
01/041/2017 17:41:56 - INFO - Strategy firefox failed trying next one : No Firefox installation found
01/041/2017 17:41:56 - INFO - No proxy found for java. Trying next one
01/041/2017 17:41:56 - INFO - Syncing devices from github
01/041/2017 17:41:57 - INFO - Opening devices repository.
01/041/2017 17:41:57 - INFO - Scanning devices folder for changes.
01/042/2017 17:42:07 - INFO - Pulling changes from github.
01/042/2017 17:42:08 - INFO - Quietly closing devices repository.
01/042/2017 17:42:08 - INFO - Devices sync finished.
01/042/2017 17:42:08 - INFO - Loading devices database
01/042/2017 17:42:08 - INFO - Loaded 94 devices
01/042/2017 17:42:08 - INFO - Starting phone detection
01/042/2017 17:42:13 - INFO - Device connected with USB debugging on
01/042/2017 17:42:14 - INFO - Connected device : Sony Xperia Z2
01/042/2017 17:42:14 - INFO - Installed version of busybox : N/A
01/042/2017 17:42:14 - INFO - Android version : 6.0.1 / kernel version : 3.4.0-perf-g43ea728 / Platform : 32bits / Build number : 23.5.A.1.291
01/042/2017 17:42:14 - INFO - Root access denied
skhozema said:
...
I tried to flash ftf stock with flash tool it gives error root access denied...
Click to expand...
Click to collapse
Tried with userdata wiped too? And make sure you plugged in your phone to the driver-installed-flashtool-installed computer in flash mode (download mode).
...
motherboard , battery issue has to be replaced estimated charges so high that i could buy new phone. My gut feeling, this being software issue can be solved. Hence, i plug again to Flash tool where it gave me report as under. The phone does not response to any buttons but when connected the led light red blinks indicating battery charging.
Click to expand...
Click to collapse
If LED was blinking red, it is no sign for charging, instead it indicate kernel error (soft brick), follow my advice above and see if it works.
iXaidyiu said:
Tried with userdata wiped too? And make sure you plugged in your phone to the driver-installed-flashtool-installed computer in flash mode (download mode).
If LED was blinking red, it is no sign for charging, instead it indicate kernel error (soft brick), follow my advice above and see if it works.
Click to expand...
Click to collapse
I have not tried to wipe user data. Should i do it? and if so please advise how to .
skhozema said:
I have not tried to wipe user data. Should i do it? and if so please advise how to .
Click to expand...
Click to collapse
Yes you definitely should.
In flashtool menu, you have to INCLUDE all and EXCLUDE none when flashing a FTF.
Please use flashtool v0.9.18.6 for stable result.
iXaidyiu said:
Yes you definitely should.
In flashtool menu, you have to INCLUDE all and EXCLUDE none when flashing a FTF.
Please use flashtool v0.9.18.6 for stable result.
Click to expand...
Click to collapse
Thanks thankyou ... its done i am so happy i thought i would lose this junk but you made it revive.. ..i thankyou once again and appreciate your time to address my problem. I have attached the log file of ftf flash for your perview. Please take a glance .
thank you very very much
Old habits die hard... i would like to root request for your guidance...
skhozema said:
Thanks thankyou ... its done i am so happy i thought i would lose this junk but you made it revive.. ..i thankyou once again and appreciate your time to address my problem. I have attached the log file of ftf flash for your perview. Please take a glance .
thank you very very much
Old habits die hard... i would like to root request for your guidance...
Click to expand...
Click to collapse
Glad to hear that my suggestion help you out, please use the dedicated thanks button to give thanks
so, i wanna flash android kitkat on my xperia ultra z using flashtool, but everytime i try, i get a error like: this bundle is not valid!
i dont have a bundle because i already have a ftf bundle! is this a driver issue? or is my device even supported? also this is the log:
28/059/2022 18:59:21 - INFO - Flashtool Version 0.9.18.3 built on 10-20-2014 08:00:00
28/059/2022 18:59:21 - INFO - Executing search strategies to find proxy selector
28/059/2022 18:59:21 - INFO - No proxy found for IE. Trying next one
28/059/2022 18:59:21 - INFO - Strategy firefox failed trying next one : No Firefox installation found
28/059/2022 18:59:21 - INFO - No proxy found for java. Trying next one
28/059/2022 18:59:22 - INFO - Syncing devices from github
28/059/2022 18:59:22 - INFO - Scanning devices folder for changes.
28/059/2022 18:59:38 - INFO - Changes have been found. Doing a hard reset (removing user modifications).
28/059/2022 18:59:38 - INFO - Pulling changes from github.
28/059/2022 18:59:38 - INFO - Devices sync finished.
28/059/2022 18:59:41 - INFO - Device disconnected
28/001/2022 19:01:45 - ERROR - root : this bundle is not valid
28/001/2022 19:01:45 - INFO - Selected Bundle for Sony Xperia Z Ultra (C6843). FW release : 14.6.A.1.236. Customization : Customized BR
28/001/2022 19:01:45 - INFO - Preparing files for flashing
forgot to point out, its not the flashtool for s1 devices or whatever, its the sony mobile flasher by androxyde
The error is for the rooting option, just wait for it to prepare the files and after a few minutes it should show you the pop up window to connect your phone and hold the buttons.
Also 9.18 had some problems I'd recommend using 9.15 for flashing Kitkat.
bipolarbit said:
The error is for the rooting option, just wait for it to prepare the files and after a few minutes it should show you the pop up window to connect your phone and hold the buttons.
Also 9.18 had some problems I'd recommend using 9.15 for flashing Kitkat.
Click to expand...
Click to collapse
thanks! i will be sure to try. if i have any updates (aka errors) i will be sure to comment!
forgot to say, the touch of my xperia doesnt work (probably explained wrong, i cant touch my phone, i can only control it with a mouse, lol) gonna try this today, wish me luck!
hcaptcha said:
forgot to say, the touch of my xperia doesnt work (probably explained wrong, i cant touch my phone, i can only control it with a mouse, lol) gonna try this today, wish me luck!
Click to expand...
Click to collapse
I wish you luck, if you've replaced your broken display before it doesn't work with custom roms. Only the stock roms and a few custom ones based on stock will work. Also saw someone using Xperia companion to fix things but you have re-lock your bootloader.
bipolarbit said:
I wish you luck, if you've replaced your broken display before it doesn't work with custom roms. Only the stock roms and a few custom ones based on stock will work. Also saw someone using Xperia companion to fix things but you have re-lock your bootloader.
Click to expand...
Click to collapse
(sorry for late reply) thank you! i havent done this (yet) because of i dont want to brick my device, and just because i am procrastinating