Heimdall on MAC OS X help? - Galaxy S III Q&A, Help & Troubleshooting

Hey guys...
Anyone know where and what the pit file for the S3 is for Heimdall on mac os x? For XXELLA?
Thanks
Oli

whatever you're thinking of doing - don't do it, because you clearly don't know what you're doing. You'll end up with a useless piece of plastic.
What do you need the pit file for?

Glebun said:
whatever you're thinking of doing - don't do it, because you clearly don't know what you're doing. You'll end up with a useless piece of plastic.
What do you need the pit file for?
Click to expand...
Click to collapse
I need the pit file because it asks for one to flash a ROM using heimdall...
I need to use heimdall because I want to go back to XXELLA, I'm running MIUI at the moment but wanna go back to standard.
I do know what I'm doing, I'm fully capable using ODIN but never used heimdall before as I only have a mac at home.

I do know what I'm doing,
PIT files are generally on sammobile.com as part of the firmware .
Be 100% sure before using a PIT .
jje

I've just remembered, as I have my phone working again I can use Mobile ODIN, transfer the file across, PDA - then find the file and do it?
Is this correct?

In fact.
I downloaded the XXELLA zip file from sammobile
Do I put it in Kernel, recovery, system, data, cache, param, modem, hidden or ota/update zip?

Nobody?

Anyone?

Related

[Q] About the PIT file

Just a quick question about the PIT file. im not to savy about what it exactly is, from what i can tell it is the system file and atm all the current EU firmwares use EXT4.PIT.
Does this mean i never have to update the PIT file as long as the firmware uses EXT4.PIT?
im going to update my s2 to I9100XEKE1 later and when i flash it in odin i also put in the PIT file what would it do?
thanks
Crucio_
hope i dont get told off for bumping ^^ getting close to home time and was hoping to find out beforei get home.
thanks
Crucio_
Crucio_ said:
Just a quick question about the PIT file. im not to savy about what it exactly is, from what i can tell it is the system file and atm all the current EU firmwares use EXT4.PIT.
Does this mean i never have to update the PIT file as long as the firmware uses EXT4.PIT?
im going to update my s2 to I9100XEKE1 later and when i flash it in odin i also put in the PIT file what would it do?
thanks
Crucio_
Click to expand...
Click to collapse
Per the instructions in the thread, DO NOT TOUCH PIT FILE.
thank you for the responce pulser, i will leave the .PIT alone when i flash. Its like one of them things your told not to touch so you wanna touch it or at least learn more about it.
i'll just read more about it, but wont touch it. thanks again
Crucio_ said:
thank you for the responce pulser, i will leave the .PIT alone when i flash. Its like one of them things your told not to touch so you wanna touch it or at least learn more about it.
i'll just read more about it, but wont touch it. thanks again
Click to expand...
Click to collapse
A PIT file is just instructions explaining the partition layout. You must always use a PIT file matching the current partition layout (i.e. the orignal PIT file used to partition the device) unless you are repartitioning. If you are repartitioning then every you must re-download everything (PDA, CSC, MODEM, etc.). You also need to ensure the PIT file is compatible with what you are downloading. Some PIT files might use partitions too small, for example, for the firmware you are downloading.
Yep. Pit is just a layout of the drive, nothing more or less. If you reflash the same pit, you've done nothing. Its a partition which comes after the PBL and helps it locate a bootable SBL.
Question please regard PIT
Hope this is not too much of a thread drift but may relate potentially to the PIT file.
I think I may have unwittingly changed the PIT file when using ODIN.
I definitely placed a PIT file in the PIT window.....doh
Would this cause my WiFi to not work? I have tried a number of ROMs and they all work fine apart from the WiFi, which is always off and then shows error when you click to switch it on.
If this is the case that the PIT file has corrupted this, how should I go back and correct it?
Cheers

Modem push through Heimdall

Hello,
I've tried before, and was unsuccessful. I am on a small regional carrier and when flashing MIUI, my 3g or 1x data connection does not work and reception is very very poor due to being on a verizon radio. I have accuired my carreirs ODIN files, but running linux I use Heimdall. However, I've extracted the files and have the modem.bin file. When I flash this over my MIUI ROM, and try to reboot, I get some wiered error where MIUI wont even boot up. I don't remember the error and am at work currently(which is the reason for the spelling errors also, sorry).
My proccess is:
1. Install MIUI from stock
2. Boot and install Glitch V12
3. Flash new modem.bin through Heimdall using Atlas 2.2.1 pit file(a pit file is required correct?)
Am I doing something wrong? Is the correct way
1. Flash Phone to stock with carriers radio
2. Install MIUI
3. Yada Yada
Everything works currently but data, I have to connect to WIFI. Any suggestions for me?
I'm not positive because i'm on Verizon and have never had to do this but I believe using the pit file when you flash the modem is your problem..try doing everything you said in the same order but when it comes to the part about flashing the modem do not use the pit file that is used only when you repartition, so no needed for that
Sent from my SCH-I500 using XDA App
Correct me if I'm wrong(probably am), but don't you have to populate the .pit file portion in order for odin to flash?
Sent me alink to the modem.bin i will prepare a cwm flashable zip for you.
That would be awsome demetris, it'll be about 2 hours before I will be able to do that as I am currently at work. I'll post it up here soon. Thank you
kyleco said:
Correct me if I'm wrong(probably am), but don't you have to populate the .pit file portion in order for odin to flash?
Click to expand...
Click to collapse
nope you don't have to populate the pit section to flash..you just need to use the pda button only, (never the phone button) if you were using an official VZW rom.tar and you wanted to repartition, then you would use the pit section but unless your repartitioning, it's not a requirement for Odin to flash, and would actually cause problems using a pit file with out an official VZW.tar...which is why I think you were having the issues trying to flash a modem with a pit file.
Edit: i'm sorry I just realized the instructions I just gave were for Odin and you're using heimdal...or wait...are you using Odin or heimdal?? I would wait for the previous posters cwm zip, because i'm unsure of heimdal's exact instructions, unless you are using Odin? but I still think your problems stems from using the pit with the modem
Sent from my SCH-I500 using XDA App
I am using Heimdall, and now that I am at my laptop, you do have to load a .pit file in order to add a partion portion(such as a modem) here is the modem.bin file demetris. I really appreciate the .zip file man! I'm hoping this helps me. Now I just need to find a way to push my carriers prl file to my phone so it stops pushing to verizon update.
Demetris, if you know how to make a .zip for a prl file, here is the .prl for my also.
I owe you one for this,
Thanks everyone!
What fascinate you got there, it seems modem is bigger than galaxy s family,
i think is the verizon cdma and i need to know where that modem lies in the partition.
Anyway i made one with the stantard bml12 partition that all galaxy s modems are i hope is the same on cdma
Here it is:
http://www.multiupload.com/AL7IBCDKMB
Flash it with CWM.
If you need an odin one just ask
I've got the version version of the fascinate. I500. I'll give this zip a try. Thanks again

[Q] [Help] Samsung S2 - dont want custom rom - want to go back to stock

Hi guys,
Im having a difficult time finding out how i can get back to the nordic official samsung rom.
I have no idea what i should flash and if i need Odin or just use recovery..
So if there is a kind soul out there that can point me to the correct files, and explain it step by step, i will be forever gratefull!
Yes, I know there are some guides, and i have tried reading them.. But I dont want to **** this up, as I need the phone tomorrow for work :/
So, please, if you can help me, i will be very gratefull
Phone: Samsung Galaxy S2
Country: Norway
Check the model under the battery.
Go to sammobile.com and get your ROM for your region.
Or use checkfus downloader and get the ROM for Norway.
Also mind you, You can flash any region ROM for i9100 in your phone.
atifsh said:
Check the model under the battery.
Go to sammobile.com and get your ROM for your region.
Or use checkfus downloader and get the ROM for Norway.
Also mind you, You can flash any region ROM for i9100 in your phone.
Click to expand...
Click to collapse
Ok i now have the rom from Sammobile and Odin with a Pit file.
I must then go to download mode on phone, and what settings should i have when i now flash?
Should i use the PIT file?
The guide from sammobile was just a repair guide, didnt help me at all..
I have I9100XXLPQ_I9100OXXLPD_NEE.zip.
I have Odin.
What now?
Whatever you do, don't use the PIT file.
MistahBungle said:
Whatever you do, don't use the PIT file.
Click to expand...
Click to collapse
Ok..
But what do i need to do then?
I have the I9100XXLPQ_I9100OXXLPD_NEE.zip (should i extract it?).
And Odin ready.
Do I need more files?
Follow the flashing guide here: http://forum.xda-developers.com/showthread.php?t=1075278
Chris.
No don't use pit, don't know how you get that.
Just extract the zip file you will get tar.md5, put it in pda under Odin.
Also the file you got is ics, just to let you know, if that matters.
So this is how i understand it after reading alot.
1. Unzip the I9100XXLPQ_I9100OXXLPD_NEE.zip
2. Open Odin 1.83
3. Choose the unzipped file I9100XXLPQ_I9100OXXLPD_I9100XXLPQ_HOME.tar.md5 as PDA.
4. Flash without ticking ANY of the options in Odin.
5. Sucess??
Can someone PLEASE confirm?
Already linked above the guide
See exactly what to check what to uncheck
naikern said:
So this is how i understand it after reading alot.
1. Unzip the I9100XXLPQ_I9100OXXLPD_NEE.zip
2. Open Odin 1.83
3. Choose the unzipped file I9100XXLPQ_I9100OXXLPD_I9100XXLPQ_HOME.tar.md5 as PDA.
4. Flash without ticking ANY of the options in Odin.
5. Sucess??
Can someone PLEASE confirm?
Click to expand...
Click to collapse
Its a good idea to read that guide, but yeah that's how you do it, without clicking or unclicking any thing

[Q] Have I really bricked my S3 (EU) using HEIMDALL?

Hello all,
I'm hoping someone can advise me with the following problem. I bought a unlocked S3 in Belgium (no branding, network locks etc), and the other day I noticed the latest firmware I9300XXBLFB on http://forum.xda-developers.com/showthread.php?t=1646610
As I use OSX I found out that I needed to use Heimdall to flash it.
I download the ROM, unzipped it, then I renamed the tar.md5 to .tar extracted that which gave me the following files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img
system.img
Now the problem began with the PIT... I required one, and stupidly went off to google in search of an S3 .pit file.... which I found
So I selected the .pit, added the files to their relevant partition, and flashed....
Upon rebooting the phone had updated, however there was no factory reset, everything I had previously was there (to my surprise), but the system info showed the correct rom, baseband, blah blah.
Yesterday I noticed I could not access any internet services. Say I open GMail app, and tried to open a mail, it closed the app after a number of seconds (without displaying the mail contents btw).... no error, just back to the main screen.
I also had problems using 3G or WiFi... nether was stable.
So I reflashed yesterday evening.. at which point I found out how to read in my own .pit file off the phone... but of course I've flashed someone else's previously. I did an MD5 sum on the one I extracted off my phone, and also on the one I downloaded off the net and they still matched.
Still I had the same problems, so I thought perhaps I should drop down a ROM version.
I grabbed a zip file with I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 and proceeded to flash it.
Now the phone won't fully boot, it just sits in the Samsung animation and the blue LED pulsing.
I'm guessing I've stuffed up the PIT... the big question is now, what the hell should I do.
FYI I can still get to recovery mode and Odin mode.
Any help / advice would be really appreciated guys.
All the best and thanks in a advance
PS: I just this minute reflashed using Heimdall the I9300XXBLFB. Now it boots up, on first boot it said Updating Android optimsing applications 1/65 and proceeded thru to the point it asks me which language I want... this normal??
kuntstubble said:
Hello all,
I'm hoping someone can advise me with the following problem. I bought a unlocked S3 in Belgium (no branding, network locks etc), and the other day I noticed the latest firmware I9300XXBLFB on http://forum.xda-developers.com/showthread.php?t=1646610
As I use OSX I found out that I needed to use Heimdall to flash it.
I download the ROM, unzipped it, then I renamed the tar.md5 to .tar extracted that which gave me the following files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img
system.img
Now the problem began with the PIT... I required one, and stupidly went off to google in search of an S3 .pit file.... which I found
So I selected the .pit, added the files to their relevant partition, and flashed....
Upon rebooting the phone had updated, however there was no factory reset, everything I had previously was there (to my surprise), but the system info showed the correct rom, baseband, blah blah.
Yesterday I noticed I could not access any internet services. Say I open GMail app, and tried to open a mail, it closed the app after a number of seconds (without displaying the mail contents btw).... no error, just back to the main screen.
I also had problems using 3G or WiFi... nether was stable.
So I reflashed yesterday evening.. at which point I found out how to read in my own .pit file off the phone... but of course I've flashed someone else's previously. I did an MD5 sum on the one I extracted off my phone, and also on the one I downloaded off the net and they still matched.
Still I had the same problems, so I thought perhaps I should drop down a ROM version.
I grabbed a zip file with I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 and proceeded to flash it.
Now the phone won't fully boot, it just sits in the Samsung animation and the blue LED pulsing.
I'm guessing I've stuffed up the PIT... the big question is now, what the hell should I do.
FYI I can still get to recovery mode and Odin mode.
Any help / advice would be really appreciated guys.
All the best and thanks in a advance
Click to expand...
Click to collapse
UNZIP THE DOWNLOADED ROM ONCE FROM .RAR TO .TAR/MD5 FILE. AND PUT THE SINGLE .TAR FILE IN PDA SECTION IN ODIN AND FLASH IT. Really, start to read before you do anything
the instructions don;t mention requiring a pit, also, why remane .tar.md5 to .tar when the instructions say "Click PDA and select *.tar.md5". seeing as you can still connect with odin, you onlt have a soft brick and you can still use odin and flash something properly.
gee2012 said:
UNZIP THE DOWNLOADED ROM ONCE FROM .RAR TO .TAR/MD5 FILE. AND PUT THE SINGLE .TAR FILE IN PDA SECTION IN ODIN AND FLASH IT. Really, start to read before you do anything
Click to expand...
Click to collapse
Erm, think you need to read first... I said I use Heimdall because I'm on OSX.
OrbNRG said:
the instructions don;t mention requiring a pit, also, why remane .tar.md5 to .tar when the instructions say "Click PDA and select *.tar.md5". seeing as you can still connect with odin, you onlt have a soft brick and you can still use odin and flash something properly.
Click to expand...
Click to collapse
Once again, I'm using Heimdall not Odin. I'm on OSX not Windows.
Secondly the tar.md5 file is a tar file containing all the components that make the ROM.
kuntstubble said:
Erm, think you need to read first... I said I use Heimdall because I'm on OSX.
Click to expand...
Click to collapse
Oke, my bad. I don`t use heimdal so can`t help you.
Go to recovery (power on with pressing VOL-UP + HOME + POWER when the phone is off) and do a factory reset / wipe data.
This wasn't caused by using a .PIT, though: never use a .PIT ever again, never ever.
HellcatDroid said:
Go to recovery (power on with pressing VOL-UP + HOME + POWER when the phone is off) and do a factory reset / wipe data.
This wasn't caused by using a .PIT, though: never use a .PIT ever again, never ever.
Click to expand...
Click to collapse
Done that also, made no difference :-(
I don't care which ROM I recover correctly but I do want to get the phone working LOL
Use a windows pc and stop using mac?
Its really easy to fix your problem via Odin....
U can use usb jig to unbrick ur phone,and in the future,use odin for all the flashing on ur s3..
Sent from my GT-I9300 using xda app-developers app
pedja381 said:
U can use usb jig to unbrick ur phone,and in the future,use odin for all the flashing on ur s3..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Stupid reply USB Jig does not unbrick a phone .
ODIN how can the OP use Odin and why would you think its better than Heimdall ??? .
jje
OK the phone is running, but it's bizarre ...
Basically I'm connected to my WiFi signal, and Chrome works 100%... but the normal browser does'nt... just hangs, then closes.
GMail if I open it I can see all the mails, if I click on one, it just sits there with the circle going round, then closes, although if I scrolll thru all mails it does load more... very strange.
Seems any default apps that where installed have connection issues... It's really pi**ing me off....
Anyone?
BTW: *#1234# reports:
AP: I9300XXBLFB
CP: I93000XXLFB
CSC: I9300OXABLFB
It doesn't matter if you change .tar.md5 to .tar i always do it to.
What was the name of the pit you flashed?
Hi,
I downloaded GalaxyS3RootMac which contained a file called
s3pit.pit
MD5 (s3pit.pit) = c67ccbe3628793a9f0dba761c15e0896
Thats the one I used ... stupidly ... so I guess I overwrote mine own one...
I had this exact same thing with browser. That was caused eather from wrong csc or that I mistakenly flashed the firmware using phone field in odin and not pda. Try to change your csc to something else using *#272*IMEI#. That wipes the phone.
Tried what you recommend but still same problem
I choose BTC btw
It previously was on KOR
Sent from my GT-I9300 using xda premium
People read the damn topic before posting.
Usb jig is for accessing download mode, which he can do just fine without.
The phone is softbricked, not soft-hardbricked.
I've never used Heimdall but afaik it has caused issues in the past.
Is anyone you know using Windows or can you install Windows as Bootcamp on your Mac?
If so, please try again with Odin, but factoryreset your phone before and after.
Please also confirm you're actually on hardware i9300 or i9300T, not e.g. i9308
Sent from my GT-I9300 using xda premium
d4fseeker said:
People read the damn topic before posting.
Usb jig is for accessing download mode, which he can do just fine without.
The phone is softbricked, not soft-hardbricked.
I've never used Heimdall but afaik it has caused issues in the past.
Is anyone you know using Windows or can you install Windows as Bootcamp on your Mac?
If so, please try again with Odin, but factoryreset your phone before and after.
Please also confirm you're actually on hardware i9300 or i9300T, not e.g. i9308
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi, well you're completely correct I could go bootcamp although I prefer not to. If all else fails I'll do it that way. Sadly today I can't get my hands on a Windows system to use.
The phone is a Benelux model I believe (bought from Mobistar), under that battery it says i9300 from what I remember.
Cheers for the logical response
I got exactly the same problem as the OP with the S3, a Macbook Air on Lion, and Heimdall yesterday. I was frustrated but ended up trying Odin on a Windows 7 virtual machine to re-flash a stock firmware. It went through perfectly and I was saved.

brick the phone after flash with a wrong pit file

hi there,
i flash my phone with a wrong pit file, and i run into a problem. its already fixed again by my self, but i want to share my experience with you, maybe someone can use it too.
you can download stock- roms, odin and pit files for your phone on sammobile.com. i found a explanation on samdownloads.de with follow information's:
- pit file with 220 on the end is for 16gb version
- pit file with 322 is for 32bg version
- pit file with 329 is for 64gb version
HOLD ON! This information's are wrong for me, and that's why i ran into this problem.
so i download a rom, and i choose the 322 file for my device and start with the flash process. result from that was, that odin hangs on step, SET PARTITION, and that was it. before, i already deleted the other pit files, while i was thinking i didn't need it. so the first was, i investigate some times to find the pit files on the net again and i start to flash with all files, one after the other..
my phone hangs with 220 pit file, with 322 pit file but i get it successfully flashed with 329 file, which if i believe to samdownloads.de was the file for the 64gb version of the phone.
in my opinion and if i look on my experience right now, for international i9300 32bg version the right pit file was the 329. after flashing it again, my phone was again fully stock, everything was fine, my 25gb free space was there, so its fine.
maybe i can help someone with this information's..
m_adnan said:
hi there,
i flash my phone with a wrong pit file, and i run into a problem. its already fixed again by my self, but i want to share my experience with you, maybe someone can use it too.
you can download stock- roms, odin and pit files for your phone on sammobile.com. i found a explanation on samdownloads.de with follow information's:
- pit file with 220 on the end is for 16gb version
- pit file with 322 is for 32bg version
- pit file with 329 is for 64gb version
HOLD ON! This information's are wrong for me, and that's why i ran into this problem.
so i download a rom, and i choose the 322 file for my device and start with the flash process. result from that was, that odin hangs on step, SET PARTITION, and that was it. before, i already deleted the other pit files, while i was thinking i didn't need it. so the first was, i investigate some times to find the pit files on the net again and i start to flash with all files, one after the other..
my phone hangs with 220 pit file, with 322 pit file but i get it successfully flashed with 329 file, which if i believe to samdownloads.de was the file for the 64gb version of the phone.
in my opinion and if i look on my experience right now, for international i9300 32bg version the right pit file was the 329. after flashing it again, my phone was again fully stock, everything was fine, my 25gb free space was there, so its fine.
maybe i can help someone with this information's..
Click to expand...
Click to collapse
I've had my S3 since may 25th MAY and done tons of flashing of ROMS. Never have i ticked the pit as it was clearly mentioned in all the flashing tutorials. There is no need to do it and dont need to encourage others to do something which can hard brick their phones.
sak500 said:
I've had my S3 since may 25th MAY and done tons of flashing of ROMS. Never have i ticked the pit as it was clearly mentioned in all the flashing tutorials. There is no need to do it and dont need to encourage others to do something which can hard brick their phones.
Click to expand...
Click to collapse
100% agree stay away from PIT unless you really know what you are doing .
jje
sak500 said:
I've had my S3 since may 25th MAY and done tons of flashing of ROMS. Never have i ticked the pit as it was clearly mentioned in all the flashing tutorials. There is no need to do it and dont need to encourage others to do something which can hard brick their phones.
Click to expand...
Click to collapse
JJEgan said:
100% agree stay away from PIT unless you really know what you are doing .
jje
Click to expand...
Click to collapse
its only as a information, maybe somebody runs into the same problem..
It's true that's it's not advised to play with pit files, but I think it would be better if you explained to people why.
Pit files are to be used only when you need to restore partition layout on the phone. That means after you mess up partitions and not before. Bu some guys just ignore warnings like this.
PjotrFias said:
It's true that's it's not advised to play with pit files, but I think it would be better if you explained to people why.
Pit files are to be used only when you need to restore partition layout on the phone. That means after you mess up partitions and not before. Bu some guys just ignore warnings like this.
Click to expand...
Click to collapse
The why is generally that they use the wrong PIT files .
One of the stupid reasons why is going to forum xxxx downloading firmware from them then coming here to ask why has it broke my phone .
PIT mistakes for SG range are in the thousands not just the odd few .
jje
flashed a pit file and now my galaxy s2 is hard bricked
Hi
im new to xda. but having been trying to root my galaxy s2 I9100 through xda tutorials.
my problem started when i flashed a pit file with odin.and now i think its hard bricked. doesn't respond to anything, doesn't show on odin either. ive taken the battery out and have kept it like it for more than 6 hours, with no luck at all. but once i put in the battery to check it becomes hot. even bought a USB Jig and tried, nothing happened. please help as in my country we dont get warranty or we dont samsung service centers. I've tried so many ways to get my phone to life but have failed.. please help:crying:
Does the phone boot to download mode does Odin see the phone .
jje
JJEgan said:
Does the phone boot to download mode does Odin see the phone .
jje
Click to expand...
Click to collapse
nope nothing happens only gets hot..
boboschiyax said:
nope nothing happens only gets hot..
Click to expand...
Click to collapse
One source a USB Recovery Jig and try to enter download mode .Flash stock firmware .
That fails its a paid for service centre job .
jje
JJEgan said:
One source a USB Recovery Jig and try to enter download mode .Flash stock firmware .
That fails its a paid for service centre job .
jje
Click to expand...
Click to collapse
thanks but already did that. didn't work
boboschiyax said:
i think its hard bricked. doesn't respond to anything, doesn't show on odin either.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=32367917
pleaaaaaaaaaase help me !!
m_adnan said:
hi there,
i flash my phone with a wrong pit file, and i run into a problem. its already fixed again by my self, but i want to share my experience with you, maybe someone can use it too.
you can download stock- roms, odin and pit files for your phone on sammobile.com. i found a explanation on samdownloads.de with follow information's:
- pit file with 220 on the end is for 16gb version
- pit file with 322 is for 32bg version
- pit file with 329 is for 64gb version
HOLD ON! This information's are wrong for me, and that's why i ran into this problem.
so i download a rom, and i choose the 322 file for my device and start with the flash process. result from that was, that odin hangs on step, SET PARTITION, and that was it. before, i already deleted the other pit files, while i was thinking i didn't need it. so the first was, i investigate some times to find the pit files on the net again and i start to flash with all files, one after the other..
my phone hangs with 220 pit file, with 322 pit file but i get it successfully flashed with 329 file, which if i believe to samdownloads.de was the file for the 64gb version of the phone.
in my opinion and if i look on my experience right now, for international i9300 32bg version the right pit file was the 329. after flashing it again, my phone was again fully stock, everything was fine, my 25gb free space was there, so its fine.
maybe i can help someone with this information's..
Click to expand...
Click to collapse
i tried 4 pit files to repartition my samsung s3 i9300 but all the result is fault
my s3 now dead
please help me
i search google for all pit files of i9300 but no success
pleaaaaaaaaaaaaaaaaaaaaaaaaaaaaase can anybody help me!!
please help me i did the same thing i have note 3 of n9005 UAE version of 32gb and i flashed a wrong pit file (i.e i flashed N900A pit file in N9005 ) and i tried many pit files using Nand erase all in odin but its not working for me as it just erased the partion in my phone but its not repartioning i mean not replacing any pit file
and odin just showing me error all the time and flashing FAIL
Nothing you can do. If you flash a wrong pit file then your phone is broken. Hard bricked.
The only possibility for you is finding someone with a JTAG box. Try one of those phone repair shops. AFAIK, that's your only hope.
Flashing a wrong pit file is pretty much the worst possible thing you can do to your phone. How the hell did you manage to flash the wrong pit file? Didn't you double, triple, quadruple check that it was the correct file before flashing?
Please don't tell me that you knew that the file was meant for another phone? I've actually seen people do that... :facepalm:
Sent from my GT-I9300 using Tapatalk
NeilH1978 said:
Nothing you can do. If you flash a wrong pit file then your phone is broken. Hard bricked.
The only possibility for you is finding someone with a JTAG box. Try one of those phone repair shops. AFAIK, that's your only hope.
Flashing a wrong pit file is pretty much the worst possible thing you can do to your phone. How the hell did you manage to flash the wrong pit file? Didn't you double, triple, quadruple check that it was the correct file before flashing?
Please don't tell me that you knew that the file was meant for another phone? I've actually seen people do that... :facepalm:
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
It is possible because people usually think in terms of branding. Not aware different models may exist in different regions. Example the note gen1 has Korean and Chinese and US versions, each has a different model number.
XyRo7ec said:
please help me i did the same thing i have note 3 of n9005 UAE version of 32gb and i flashed a wrong pit file (i.e i flashed N900A pit file in N9005 ) and i tried many pit files using Nand erase all in odin but its not working for me as it just erased the partion in my phone but its not repartioning i mean not replacing any pit file
and odin just showing me error all the time and flashing FAIL
Click to expand...
Click to collapse
Here is the pit file for Note 3 SM-N9005 32gb varient.
HELP i think flashed the wrong .tar root file for my Galaxy J7 Pro
Hey man,
XDA doesn't trust me enough to let me make my own post and as I'm writing this I'm supposed to be studying for the 3 exams I will be having.
So,
I rooted my phone susing ODIN and the same root file a few months ago on Android 7.1 and it worked. I used it with TWRP recovery and everthing was fine.
Then the Android Oreo update was released for my phone, finally, and I hooked my phone up to my laptop and downloaded the firmware using Samsung's new Software called SmartThings.
Now I had stock ROM, but my device was recognized as rooted and modified, so couldn't use a few apps like Samsung Health and Pay. Then, without thinking, I put my phone in Download Mode and flashed the SAME .tar root file with ODIN, and now my phone won't boot to the pulsating Samsung logo and is stuck in the bootloader
wanted to say that Odin said PASS when .tar file was downloaded in the AP slot
In download mode,
Download Mode says:
Current Binary: Custom
System status: Official
FAP LOCK: OFF
OEM LOCK: OFF
Secure Download: Enabled
WARRANTY VOID: 1 (0x0303)
I have access to STOCK recovery and download mode, and I've already tried factory resetting phone and wiping cache. I don't want to take more rash steps without someone knowledgeable guiding me. and I cant find any other forum to post on because I'm not a high enough member.
I have fixed when up wrong file pit
My phone is samsung note9 128gb
When i try to up file pit on rom . I had loss my store from 128gb to 32gb
I don't find any solotion on web
And i have go to setting , open development setting. Choose lock OEM. After that my phone restart and recover to 128gb
Please share this solution . I hope it can help many people up wrong file pit and loss data store like me .
File up wrong pit file odin by Lock Oem
Recover Lost data store .

Categories

Resources