hello
i have the following problem,
my phone wont boot into the os
but boots directly into recovery mode
ive tried to go to download mode and try the odin way, but my pc doesnt recognize my phone anymore
i tried installing the samsung drivers and samsung kies
(worked fine before i tried to flash new rom and install recovery cwm)
ive tried to flash another rom, it succeeds to install the rom but still boots in recovery mode
i also tried to install the stock firmware but it says an error: cant open emmc gt-i9001 (bad) seven
i cant try to use recovery 6 because i have no acces to the internal sd card
i use another phone to put the roms in the external sd card
have i overlooked something?
i have read the similar topics, and googled it, but no specific solution to this problem
i think ive tried everything, please help me
Have you tried a factory reset from the stock recovery?
twizzle654 said:
hello
i have the following problem,
my phone wont boot into the os
but boots directly into recovery mode
ive tried to go to download mode and try the odin way, but my pc doesnt recognize my phone anymore
i tried installing the samsung drivers and samsung kies
(worked fine before i tried to flash new rom and install recovery cwm)
ive tried to flash another rom, it succeeds to install the rom but still boots in recovery mode
i also tried to install the stock firmware but it says an error: cant open emmc gt-i9001 (bad) seven
i cant try to use recovery 6 because i have no acces to the internal sd card
i use another phone to put the roms in the external sd card
have i overlooked something?
i have read the similar topics, and googled it, but no specific solution to this problem
i think ive tried everything, please help me
Click to expand...
Click to collapse
try this
forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
thank for trying to help
@bodh
yes i have tried factory reset, it still boots into recovery
@dkmali
i already tried that way
but odin doesnt recognize my phone, how do i get that to work?
twizzle654 said:
thank for trying to help
@bodh
yes i have tried factory reset, it still boots into recovery
@dkmali
i already tried that way
but odin doesnt recognize my phone, how do i get that to work?
Click to expand...
Click to collapse
How did you get into this situation? DId you try flashing something that caused it? What preceded this issue?
calisro said:
How did you get into this situation? DId you try flashing something that caused it? What preceded this issue?
Click to expand...
Click to collapse
it happened when i installed recovery cwm
i still have the problem when i go into recovery mode, i cant get out
i used another pc to make odin work, i used a bootloader and the os got booted
so the issue is sort of fixed.. i just dont go into recovery mode again
appreciate the help!
twizzle654 said:
it happened when i installed recovery cwm
i still have the problem when i go into recovery mode, i cant get out
i used another pc to make odin work, i used a bootloader and the os got booted
so the issue is sort of fixed.. i just dont go into recovery mode again
appreciate the help!
Click to expand...
Click to collapse
I had this problem once to. On my HTC Flyer, nothing I could do to recognize the phone. I had to ditch the HTC Driver and tried every copy of the android drive I could find on XDA. I will see if I can find the file that worked for me. But in the interim you may want to try a few.
BTW I am not an expert. This worked for me and it sounds like the same situation to me. :fingers-crossed:
Here's a question: where'd you get the recovery? http://www.clockworkmod.com/rommanager, i don't see your device as supported. Also, i believe they're called universal naked drivers, that may be of help.
calisro said:
How did you get into this situation? DId you try flashing something that caused it? What preceded this issue?
Click to expand...
Click to collapse
bodh said:
Here's a question: where'd you get the recovery?, i don't see your device as supported. Also, i believe they're called universal naked drivers, that may be of help.
Click to expand...
Click to collapse
downloaded it on this forum in the i9001 section
yeah im trying that driver thing out right now thx
http://forum.xda-developers.com/showpost.php?p=20058157&postcount=1 if you havent found them.
and in this thread: http://forum.xda-developers.com/showthread.php?t=2129298, the cwm versions are removed.."CWM 6.0.2.7 is not save to use, you may damage your phone. "
so hopefully you tried these: http://forum.xda-developers.com/showthread.php?t=1843825
I am not a developer or anything & havent read many forums...but while playing with myTouch I did get stuck a few times.
Somethings I cant point out if u wanna try as a layman:
1. can u mount your sd card through recovery?
2. if you can than just pick another rom for your device and put it onto your sd card
3. wipe data & partition, wipe cache, delete davlik. some devices work ONLY with wipe script (for my friend only the wipe script worked)
4. dont use odin. go to cwm recovery & install zip from sd card & choose the rom (the 1 from step 2).
I think that should get u out safely....hope it helps
@bodh
i actually installed a cwm 5 version
maybe thats the cause of the whole problem
@indiankarmas
i did install multiple roms from the sd card, first cm9 then stock rom
but it doesnt really work
how i fixed the problem:
when i flashed cm9 and used the bootloader with odin to pass the recovery mode my phone booted the stock os
installing from the external sd didnt work, i just wiped my phone for nothing
it booted the stock os, i didnt want this but this made my pc recognize my phone
so i transferred the rom and gapps in the internal sd
got back to recovery mode and installed from internal sd
and used the bootloader again to pass the recovery mode
again, i appreciate you guys trying to help me out
Related
I shall try to explain the situation best I can.
A long time back, I rooted my S2, then I thought I would sell it, so I wanted to put it back to stock and unroot, which I did.
Now months later, I decided to root the phone once again and put another rom on.
To cut a long story short, currently my phone wont accept any roms of any kind.
If I install CM7, MIUI, Sensation Rom, all of them seem to install a kernel as well, which causes the phone to panic upon boot. Which puzzles me, because if they are made for the S2, then why are they causing problems with my phone?
The only kernel that works for me so far is CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4. This allows me to access the internal SD via usb and put on roms. But I can't install them. As every time I do, I just either get a kernel panic or a black screen. I even used this guide, which should be foolproof and all I get is a black screen.
My phone has been in this useless state for 24 hours now and I've googled until I feel asleep at the keyboard.
Im hoping someone can seriously help me with this, as I don't pretend to know what I'm doing.
I was on ICS before this happened.
If you want your phone back then use the method in cnet to get it working again
and about the roms issue, did you factory reset and full wipe your phone before installing a rom?
I reset and wiped everytime. If I follow the cnet instructions to the letter, it just hangs on the Galaxy S2 logo when you turn on the phone and doesn't go any further. The only solution is to put on the kernel I mentioned above to get access to the SD card on my pc.
I now have managed to get CM7 RC working, but that's not the one I wanted. I wanted to use the Sensation rom, but that installs its own kernel which my phone, for some odd reason, doesn't like.
My phone details now are:
CM Mod 7.2 RC1
Kernel 2.6.35.14-g68ea119
[email protected] #1
1.Boot into recovery
2.Full wipe
3.Wipe cache
4.Advanced->Wipe dalvik cache
5.Install sensation rom zip only
6.Reboot
7.Wait for 5 mins
I followed your instructions precisely. I then installed SensatioN_ROM_3.0_ICS_i9100.zip from this thread
It installed, installed a kernel, flashed modem and said done. I then rebooted and waited.
It comes up with the S2 logo with the triangle, fine but now It just shows a battery symbol with a circle in the middle. After a while it goes to black and then comes back. Like its rebooting over and over.
I unplugged the usb cable and instead of the batter I just get the logo with the triangle. That stays there for a while, goes to black and comes back. Over and over.
I can't even get to recovery. Only thing I can do now is go into download mode and start over, put on the kernel I know that works, install CM7 RC1 and then at least I have a phone. But why sensation rom doesn't work is a mystery to me.
X82X said:
I followed your instructions precisely. I then installed SensatioN_ROM_3.0_ICS_i9100.zip from this thread
It installed, installed a kernel, flashed modem and said done. I then rebooted and waited.
It comes up with the S2 logo with the triangle, fine but now It just shows a battery symbol with a circle in the middle. After a while it goes to black and then comes back. Like its rebooting over and over.
I unplugged the usb cable and instead of the batter I just get the logo with the triangle. That stays there for a while, goes to black and comes back. Over and over.
I can't even get to recovery. Only thing I can do now is go into download mode and start over, put on the kernel I know that works, install CM7 RC1 and then at least I have a phone. But why sensation rom doesn't work is a mystery to me.
Click to expand...
Click to collapse
Don't install anything else
Repeat the steps without any modem or anything
Any try to redownload the zip
How do I stop the install of the modem? The thread only shows one zip file and if I install that in recovery, it installs everything. I can't chose what parts to install. Do I have the wrong zip?
X82X said:
How do I stop the install of the modem? The thread only shows one zip file and if I install that in recovery, it installs everything. I can't chose what parts to install. Do I have the wrong zip?
Click to expand...
Click to collapse
Just install this zip by the method above
https://docs.google.com/open?id=0Bzv8B0L32Z8lZ2hSanUtVHpSb0tFUlhkRVQ1RFhEUQ
Nothing else
While it downloads from google, I just want to clarify.
Wipe data, wipe cache, wipe dalvik. Then I go to install zip from sd. Find SensatioN_ROM_3.0_ICS_i9100.zip, then it installs. But the last time I did this, it scrolls up saying it was installing file system, then flashing kernel, then flashing modem.
Am I doing something wrong here?
And that google link is slow as hell, quoting me 7 hours to download it. Got it from hotfile instead, going to try that one.
X82X said:
While it downloads from google, I just want to clarify.
Wipe data, wipe cache, wipe dalvik. Then I go to install zip from sd. Find SensatioN_ROM_3.0_ICS_i9100.zip, then it installs. But the last time I did this, it scrolls up saying it was installing file system, then flashing kernel, then flashing modem.
Am I doing something wrong here?
And that google link is slow as hell, quoting me 7 hours to download it. Got it from hotfile instead, going to try that one.
Click to expand...
Click to collapse
Yes it should work like that if you have a i9100
Done exactly as you said. I downloaded it from the hotfile link instead and installed it.
Came up with the same thing.
Cleaning Old System files
Installing System
Data Files
Symlinks
Flashing Kernel
Flashing Modem
Ready
Then I reboot and the same looping over and over. Can't access recovery. Only solution is using odin to flash the kernel I used before and be forces to use CM7 since nothing else works.
It's so confusing as Im using the same hardware as everyone else on the sensation rom thread, but it wont work for me. at all.
you sure you have i9100?
GT-I9100
I'm totally puzzled. MIUI doesnt work, Sensation doesnt work and stops me from using recovery. The only thing that works is kernel CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4.tar then install CM7 RC1 which upgrades the recovery to version 5 and the phone works. But only on CM7. If I try to install any other rom, it dies a death.
X82X said:
GT-I9100
I'm totally puzzled. MIUI doesnt work, Sensation doesnt work and stops me from using recovery. The only thing that works is kernel CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4.tar then install CM7 RC1 which upgrades the recovery to version 5 and the phone works. But only on CM7. If I try to install any other rom, it dies a death.
Click to expand...
Click to collapse
And don't tell me that you flash cf-root after flashing every rom from recovery
No, I only flash that when the rom seems to corrupt it. Like when installing sensation. The only way I can access the SD card to put on another rom is to install that kernel.
X82X said:
No, I only flash that when the rom seems to corrupt it. Like when installing sensation. The only way I can access the SD card to put on another rom is to install that kernel.
Click to expand...
Click to collapse
This is really weird
Maybe someone else can help you
Sent from my x10i using Tapatalk
ok lets try again........
1: forget everything [ideas you have.]
2: go into clockwork recovery
3: format every partition including system / boot [remove your sdcard before starting]
4: use odin and flash stock 2.3.6 LA2 [u can flash whatever you like] and let it boot.
5: now use cf-root and root your device [http://forum.xda-developers.com/showthread.php?t=1103399 ]
6: i assume you know your way from here.
note: its very important to format system / boot partions
if yo dont have cwm or you want to try from scratch heres the latest cwm
http://www.mediafire.com/?wkki6xahfhb3bim
Thanks for info. Just to clarify, the cf-root link contains loads of different ones. How do I properly know which one to use or doesn't it matter? And as for the stock 2.3.6 LA2, again, where do I find that? Reason I ask dumb questions is I don't want to assume and try the wrong one and come back here and complain when it was my fault, I just want to be 100% sure, so again sorry for the obvious questions.
I flashed I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME then CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5.
It seems to be working fine now with the default rom. However, when I go into recovery to say perform a backup or mount the sd card, It won't have any of it.
When I try to mount the sd card it just says "error mounting sd card" and when I mount usb storage it says "unable to open lunfile (no such file or directory)". So I don't want to try another rom yet.
X82X said:
I flashed I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME then CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5.
It seems to be working fine now with the default rom. However, when I go into recovery to say perform a backup or mount the sd card, It won't have any of it.
When I try to mount the sd card it just says "error mounting sd card" and when I mount usb storage it says "unable to open lunfile (no such file or directory)". So I don't want to try another rom yet.
Click to expand...
Click to collapse
lol when i said or what you want i meant from GB you flashed a ICS ROM. well do this and this time just do what i say......
use odin again and flash XILA2 . after boot dial *2767*3855# [a must]
after reboot you should be running a problem free ROM.
now from CF-root find LA2 and flash that now play with it a while and than you do whatever as now you know where and how to get back to working ROM.
plus after LA2 you will find everything on your phone works so any problem you get on other roms is not hardware
recovery issues should be fixed now. otherwise use odin and again flash that cwm file i posted earlier. you wont loose root
Download ROM from Here
This problem started when I was trying to root my phone with Rachmat3's method when it couldn't mount sd card... Although I tried I tried with many ways nothing happened... always the same message: failed mount /sdcard..
I managed to root it somehow and I flashed Resurrection remix 1.0.. So far so good.. I downloaded rom manager(don't know why exactly, just read that it was helpfull) and noticed that i had no clockworkmod so i flashed it by rom manager.. I guess this means that now I have it installed in my phone.. which means that if I reboot my phone into recovery mode it will launch cmd or if not through recovery mode i'll find it into sdcard and install it from there... Right??? Correct me if I'm wrong please... So although I see in Rom manager that I have clockworkmod it doesn't launch in recovery mode... even if I try reboot into recovery through Rom manager when it goes into recovery, stops after a while with this message can't found cache/update.zip.. So I think maybe the problem is that this file misses(I don't know why of course.. i sure not delete it myself on purpose) is there any way to download it manually and put it into cache throw root browser??? Dont know... just saying! Or I don't know... am I missing something????
If you want CWM recovery, you need to flash a kernel which includes it such as CF-root or any of the custom ones.
oinkylicious said:
If you want CWM recovery, you need to flash a kernel which includes it such as CF-root or any of the custom ones.
Click to expand...
Click to collapse
I used CF-root already... it's the only method I managed to root it cause i'm on ICS... I downloaded CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5.zip from this page.
I managed to get clockworkmod touch after all so guess my problem solved!!!
But still have no idea why showed that message...
I created this thread because I have looked all over and have been unable to find someone with the exact same issue(s).
I said "sort of" in the title because twrp is working. Ok, so before everyone asks if I have nvflash, the answer is no. I did not have the right version of firmware, and did not try to install it originally. Since I was able to install roms, I figured I was fine...oops.
Twrp is not properly installing roms. More on that later. I am getting to the asus splash screen that says my device is unlocked, but it is stuck there.
My last working rom was the deodexed stock JB rom from craig gomez. I installed it with goo and when I installed that, I lost custom recovery and root, so I decided to go back to a more custom rom so Titanium backup would work. When I did that, I tried also tried again to make nvflash work. I got through the first step, it said it was successful, except I never got the little message in the upper left corner that I was supposed to get. I did not think it was a big deal because my prime would still boot like normal.
Then I installed twrp 2.3.1.0 and I have tried flashing previous restore images. I have tried installing the roms on my sdcard. I cannot get past the asus splash screen.
If I try installing a rom with the force md5 check enabled, it does detect an md5 and then quits.
If I try intalling a rom without the force md5 check, i get an error that says E:Unable to mount '/staging'
When I try installing a backup everything seems to work okay, but then I get the same error E:Unable to mount '/staging'
When I try to install roms through fastboot, I get the following errors:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
When I try using adb, I do not see any devices.
I tried putting CWM on the prime to see if I could install from that instead, but it would not load after install.
I tried putting an older version of twrp on the prime, to see if that was the issue because I used to have an older version...I could not get that to load either...so I went back to this version.
Any ideas or suggestions would be awesome guys. I am stuck.
I even went to install the naked drivers again, and when I try to flash a different recovery, I get the <waiting for device> text that never goes away.
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
godlyitem said:
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
Click to expand...
Click to collapse
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
big time noob said:
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
Click to expand...
Click to collapse
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
godlyitem said:
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
Click to expand...
Click to collapse
Yeah, I thought that too, but fastboot does not work properly either...argh. I wish one of the gurus would chime in here.
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
Click to expand...
Click to collapse
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
godlyitem said:
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
That doesn't really help us. If possible, can you edit/delete your message so that the guys that might help do actually help? Don't want them to think this is done.
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
Click to expand...
Click to collapse
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
godlyitem said:
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
Click to expand...
Click to collapse
big time noob said:
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
Click to expand...
Click to collapse
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Thanks. That is what I needed to know.
I will see if I can make this work when I get back from work.
godlyitem said:
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Click to expand...
Click to collapse
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
Download the zip:
http://goo.gl/hiFHB
Goto to Twrp recovery and install the zip..Since it supports microsd u can transfer the zip to microsd.
Goto TWRP -> INSTALL -> CHOOSE EXTERNAL SD -> INSTALL THE ZIP
It will completely wipe the internal storage and then download the official STOCK JB FROM ASUS SITE and follow the same steps to install. Now install the latest twrp recovery using fastboot
big time noob said:
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
Click to expand...
Click to collapse
When I was doing the fullwipe the same errors happened to me.. But dont mind..I got errors like
1. No md5 file found
2. Mount error
3. Cannot find /staging
Just follow the above the steps ull get it right
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Yeah, I should have said I tried that first. I also tried the stock rom from asus. When that didn't work, I tried the stock rom deodexed I found in goo.
There are a bunch of permission errors going on inside my prime. When I go into the mount area, it will not let me mount the data to move it. Or, when I try to copy it over I get a failed message.
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Fixed?
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
big time noob said:
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
Click to expand...
Click to collapse
big time noob said:
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
Click to expand...
Click to collapse
You will have the jelly bean bootloader now so as long as you stick to it you should be fine. The only other thing I would suggest is check you version of twrp, you should be running the jelly bean version of it also. And if I am not mistaken, you need to be on ics to use nvflash (although I haven't checked the op recently so I could be wrong) so definitely stay away from that unless you downgrade.
I tried to do a search for this problem but search isn't working on XDA right now... So my problem is that I was trying to update my Hellybean ROM and when I wiped I must have wiped something I shouldn't have. The newest ROM was saved to my internal SD and after wiping it wouldn't reboot into TWRP so I tried CWM, which it did boot into but wouldn't load the old version of Hellybean on my ext sd. I tried to load a .tar file through ODIN to get the phone going again but it keeps failing when trying to load the MTP USB drives, so I am stuck! Anyone know what the problem might be?
I should add, when loading a tar file through ODIN, the phone reboots through the initial Samsung logo then goes to another and gets stuck there. I am thinking that it is not loading all of the files because of the USB drive not being installed?
You might try grabbing the modified CWM file from BlownFuze's AOKP thread and flashing it from your ext sd card. It will flash the newest roms. If all else fails you could try the emergency firmware recovery in Kies.
ovennon sus
Really now said:
You might try grabbing the modified CWM file from BlownFuze's AOKP thread and flashing it from your ext sd card. It will flash the newest roms. If all else fails you could try the emergency firmware recovery in Kies.
Click to expand...
Click to collapse
Through CWM it will see a couple of rom's on the ext sd but I get an error when it starts to flash. I tried Kies but when I plug in the USB it doesn't see the phone. I don't think it's bricked as I can get into download mode and cwm??
After getting some sleep I thought about what I did yesterday when flashing the rom. I had a longggg day at work and was tired and after wiping the phone I think I rebooted it before flashing the rom, I am almost positive I did that. It will be the last time I flash after a long, tiring day! Anyone ever reboot the phone after a wipe without flashing a rom first?
I don't know what tar file you were flashing thru odin but I do know when you flash back to stock it always hangs up on the first boot. Then you have to go into recovery and do a factory reset and boot up again. BlownFuze posted a handy guide on flashing the stock rom back in June. You might have a look at that and see if it's any help. http://forum.xda-developers.com/showpost.php?p=42806745&postcount=360
I got it figured out and fixed... the version of CWM was an old one, uploaded the newest one and got everything reloaded!!
Glad to hear that. Seems like the 4.3 roms are a bit more finicky about the recovery version you're on.
Really now said:
Glad to hear that. Seems like the 4.3 roms are a bit more finicky about the recovery version you're on.
Click to expand...
Click to collapse
I pulled a LOT of hairs out yesterday trying to figure it out, and it was such a simple fix! Thanks for your help!!!!
I'm glad I could give a little help. Happy flashing! :laugh:
This is my first time rooting my device and all that, I'm still a noob and forever will be.
anyway I followed the normal steps where you download Odin and everything went fine and my phone was still working now I had to update the CWM version to 6.0.4 or something so I downloaded the Kit-Kat compatible zip file and upgraded the version to what I wanted it to be.
Now I read in one of the steps that I need to backup my files and so I did but now I can't recover it and my phone doesn't turn on I'm stuck in CWM I can still see my files on the phone and when I restore it does name the files I already had but my phone does not work just goes black ...so either CWM or a black screen.
My PC does not recognize the phone, Kies doesn't either.
Did I nuke my phone?
Xyloto said:
This is my first time rooting my device and all that, I'm still a noob and forever will be.
anyway I followed the normal steps where you download Odin and everything went fine and my phone was still working now I had to update the CWM version to 6.0.4 or something so I downloaded the Kit-Kat compatible zip file and upgraded the version to what I wanted it to be.
Now I read in one of the steps that I need to backup my files and so I did but now I can't recover it and my phone doesn't turn on I'm stuck in CWM I can still see my files on the phone and when I restore it does name the files I already had but my phone does not work just goes black ...so either CWM or a black screen.
My PC does not recognize the phone, Kies doesn't either.
Did I nuke my phone?
Click to expand...
Click to collapse
i can't understand: are you able to access CWM (using the three button combination) or you can't even turn on your phone?
If you can access CWM, go in "mounts and storage" and select "mount USB storage", then connect your phone to the computer and see if it is recognized
1265 9885948
Never mind, I figured it out, thanks anyway
Hi all,
I am in the same situation, but can't figure it out.... I wanted to upgrade to Kitkat so I downloaded Supernexus 4.0 but the install from zip fails everytime I attempt it.. So I'm stuck in the CWM and I don't have a backup ROM to install...
I checked the md5 sum of the ROM, it's ok.
I wipe the /data partition, the cache and the dalvik cache before installing from zip..
I installed the last CWM version (v6.0.4.5).
I don't know what to do next because the only ROM I have in my phone is the supernexus 4.0 which cannot be installed and I cannot mount my phone using "mount USB storage" in CWM, my PC doesn't see the phone mass storage..
Any idea ?
Thanks,
Hervé
delh01 said:
Hi all,
I am in the same situation, but can't figure it out.... I wanted to upgrade to Kitkat so I downloaded Supernexus 4.0 but the install from zip fails everytime I attempt it.. So I'm stuck in the CWM and I don't have a backup ROM to install...
I checked the md5 sum of the ROM, it's ok.
I wipe the /data partition, the cache and the dalvik cache before installing from zip..
I installed the last CWM version (v6.0.4.5).
I don't know what to do next because the only ROM I have in my phone is the supernexus 4.0 which cannot be installed and I cannot mount my phone using "mount USB storage" in CWM, my PC doesn't see the phone mass storage..
Any idea ?
Thanks,
Hervé
Click to expand...
Click to collapse
Always keep a working kernel/rom .zip in you internal memory so if you are stuck you don't need to use Odin!
Try to use another USB port or another computer to see if it is recognized, or if you have a MicroSD load a rom on that and insert it in your phone.
if not, you have to use Odin and flash a kernel or rom using the pc.