hiii guys i really want to upgrade my ZP300+ to 4.2 or 4.1 as i m really pissed off with the battery drain bug of 4.0.4. can i flash my zp300+ with ZP950 ROM OS 4.1.2 Pls Help guys
bump!!!!!
bump!!!!!!!!!!
Bump guys ¡!¡! Is forum dead
Sent from my ZP300+ using Tapatalk 2
Zopo zp300+ support
Tarun93 said:
Bump guys ¡!¡! Is forum dead
Sent from my ZP300+ using Tapatalk 2
Click to expand...
Click to collapse
Hi buddy,
There is very little help at the moment on xda for zp300+ it seem's I am not sure why it is not better supported since it's quite a good phone
There is help out there for general MTK6577 devices but not much that's specific to our device. The zopo forum is useful but seems to be a bit of a closed club I have tried 3 times to register and they never send me a confirmation email
I will up load the ROM's I have but I am affraid they are all based on 4.0.4. I have the Lewa rom (seems ok) cm9 multi language rom (not tried it yet) & Baidu OS rom (not tried it yet)
ROMS Here
Regards bigrammy.
PS: Dont forget to thanks if I helped :good:
thanx
bigrammy said:
Hi buddy,
There is very little help at the moment on xda for zp300+ it seem's I am not sure why it is not better supported since it's quite a good phone
There is help out there for general MTK6577 devices but not much that's specific to our device. The zopo forum is useful but seems to be a bit of a closed club I have tried 3 times to register and they never send me a confirmation email
I will up load the ROM's I have but I am affraid they are all based on 4.0.4. I have the Lewa rom (seems ok) cm9 multi language rom (not tried it yet) & Baidu OS rom (not tried it yet)
ROMS Here
Regards bigrammy.
PS: Dont forget to thanks if I helped :good:
Click to expand...
Click to collapse
sorry if m acting like a noob by pls are those custom ROMs with custom kernels ??? are they of zp300+ or zp300 ??
Tarun93 said:
sorry if m acting like a noob by pls are those custom ROMs with custom kernels ??? are they of zp300+ or zp300 ??
Click to expand...
Click to collapse
Hi Tarun93,
Yes they are all custom ROM's. The Lewa rom which I am using at the moment is rooted with su pre-installed already I have no doubt cm9 ROM will also be rooted and probably has su too and yes they are for the zp300+ as requested in your title
thanx
bigrammy said:
Hi Tarun93,
Yes they are all custom ROM's. The Lewa rom which I am using at the moment is rooted with su pre-installed already I have no doubt cm9 ROM will also be rooted and probably has su too and yes they are for the zp300+ as requested in your title
Click to expand...
Click to collapse
i got into BBS zopo fourm :good::highfive:
*EDIT* dude one last stupid question how do you install these things
Tarun93 said:
i got into BBS zopo fourm :good::highfive:
*EDIT* dude one last stupid question how do you install these things
Click to expand...
Click to collapse
Copy the zip to your sdcard then flash with cwmr or twrp recovery
hmm strange
hmmm i asked that bcoz i already tried that but i was unable to flash it i tried the CM9 one and i found the ROM is giving a error i also installed the lewa rom it good :thumb:
Tarun93 said:
hmmm i asked that bcoz i already tried that but i was unable to flash it i tried the CM9 one and i found the ROM is giving a error i also installed the lewa rom it good :thumb:
Click to expand...
Click to collapse
I was beginning to think you were a total noob with that question and had visions of having to start from the beginning :laugh:
Yes there is a problem in the updater.script path META-INF\com\google\android in fact there are 2 updater.script files in the zp300x cwm9 rom I do not know why there are two maybe it's normal or maybe some one has edited it and left the original in the file
Normally all you have to do is extract the updater.scrip and using notepad++ if on windows OS delete the first few lines of the script getprop as in this example from the zp300x rom you would only delete the first two lines highlited in blue.
Looking at other updater.scripts and comparing them I would try using the smaller updater.script first but maybe the zp300x rom may require further investigation first before flashing
assert(getprop("ro.board.platform") == "MT77_H950_ICS" ||
getprop("ro.board.platform") == "MT77_H950_ICS");
show_progress(0.950000, 50);
format("ext4", "EMMC", "/system", "0");
mount("ext4", "EMMC", "/dev/block/mmcblk0p3", "/system");
package_extract_dir("recovery", "/system");
package_extract_dir("system", "/system");
symlink("Roboto-Bold.ttf", "/system/fonts/DroidSans-Bold.ttf");
symlink("Roboto-Regular.ttf", "/system/fonts/DroidSans.ttf");
symlink("aee_aed", "/system/bin/debuggerd");
symlink("busybox", "/system/bin/[", "/system/bin/[[", "/system/bin/cp",
"/system/bin/grep", "/system/bin/killall", "/system/bin/tail",
"/system/bin/vi",
"/system/bin/xargs");
symlink("mksh", "/system/bin/sh");
symlink("p2p_mt6620.ko", "/system/lib/modules/p2p.ko");
symlink("toolbox", "/system/bin/cat", "/system/bin/chmod",
Regards bigrammy.
Were did you get the Custom ROMs from buddy ???? i just installed the CM9 ROM have MY fingers crossed :| CM 9 keeps crashing and there is nothing custom in that rom i mean i could not see anything
now i m trying the last one :|
Tarun93 said:
Were did you get the Custom ROMs from buddy ???? i just installed the CM9 ROM have MY fingers crossed :| CM 9 keeps crashing and there is nothing custom in that rom i mean i could not see anything
now i m trying the last one :|
Click to expand...
Click to collapse
I have not tried that ROM as I said in the original post so I have no idea also with the two updater.scrips in the ROM it seem's a little suspect or unfinished so don't bother with it :laugh:
I am happy with the lewa ROM and seems to working OK for me :good: I just had to tweak the power setting with setcpu for root & it now seems almost perfect smooth, quick and a acceptable Battery life :victory:
bigrammy said:
I have not tried that ROM as I said in the original post so I have no idea also with the two updater.scrips in the ROM it seem's a little suspect or unfinished so don't bother with it :laugh:
I am happy with the lewa ROM and seems to working OK for me :good: I just had to tweak the power setting with setcpu for root & it now seems almost perfect smooth, quick and a acceptable Battery life :victory:
Click to expand...
Click to collapse
did you overclock you zp300+ ?? i thought only if one had custom kernel he/she can overclock the phone ??? LEWA music player it crashes when i try searching a song some apps crash if i try to multi task but rarely you have any solution for this ?? and BTW the camera auto focus have you faced a problem with that ??? it seem that my camera aint focusing well the images are very blur
Tarun93 said:
did you overclock you zp300+ ?? i thought only if one had custom kernel he/she can overclock the phone ??? LEWA music player it crashes when i try searching a song some apps crash if i try to multi task but rarely you have any solution for this ?? and BTW the camera auto focus have you faced a problem with that ??? it seem that my camera aint focusing well the images are very blur
Click to expand...
Click to collapse
Hi,
I have not overclocked the phone I just used setcpu to manage the power settings to save battery. With setcpu you can do things like when the screen is off setcpu will limit the cpu to 500mhz instead of the stock 1001mhz there by saving some juice click here for more info
My camera seem's to be working just fine so I cannot advice you on that one maybe just check the setting
Yes the stock music player seems to have some bugs It plays music fine and has not crashed when I tried it but I think its more reliant on the data connection. Mine will not show any album art also there is Chinese writing in the app.
I know it may not help you but I use Poweramp paid for version and that never misses a beat & is by far the best music player I have tried.
There are lots of free players out there :good: and even poweramp has a free trial version warning though once tried you will not use any other player Poweramp :laugh:
If you continue to have problems I suggest you do a total wipe from recovery so factory reset, wipe cache, wipe dalvik cache, flash the ROM then before you boot back to system wipe the cache & dalvik cache again. When flashing ROM's some things from the previous flash get left behind & that can cause problems. SO wipe wipe wipe :laugh: Needless to say backup first.
Also fresh from the oven for you is TWRP v2.4.2.0 latest version thanks to yuweng for that here :good: I will replace the one in the TWRP folder with this version :good: use the same link for it.
PS: The ROM gets better with time. As the cache builds up it gets quicker smoother & battery improves so give it a chance.
Need help to download from zopo forum
Hi Tarun93
Can you or someone please be so kind to give me the link to this ROM over here on the zopo forum Lewa ROM
I am not registered there so I can not see the download link :crying:
ROM may be different to the one I have because they seem to have fixed some bugs which my version seems to have. :fingers-crossed:
Also @michfood as released this apk for our mtk6577 phones here it may help with better power management so give him a thanks.
Thanks in Advance. bigrammy
there seems to be a rom here:
http://forum.zopomobileshop.com/thread-335-1-1.html
Will this phone work on T-mobile?
blerd said:
Will this phone work on T-mobile?
Click to expand...
Click to collapse
Works on t-mobile UK not sure about the USA or any other country but the phone is normally unlocked so it would just be a matter of checking the band spec's of the phone then checking the band of t-mobile in your country.
See Here
Also See attached img.
Related
Hi everybody ,,, this is my new ROM based on FRG33, Stok, app2sd supported
everything is working no issue at all, if this rom have any issue this mean i don't notice it, so u can post it here
THIS IS A BIG THANKS FOR GEO411M, HE HELPED ME ALOTTTT AND LET ME USE HIS ROM TO GET SOME STUFF FROM IT AND GUIDE ME TO GET APP2SD DONE, SO MUCH THANKS DUDE
This ROM support Arabic perfect, all apps is up to date, this is some pics from the ROM
DOWNLOAD HRER
Hey man so far so good.. I flashed it a few hours ago so im looking at the battery life. Seems to be running smooth at this point will keep ya posted.
One of the fastest roms I'v used so far, thanks for the efforts. If anything comes up we'll keep you updated ^^
Noticed that once you type ل and ا connected, it adds a "space".
how do you enable apps2sd? no modinstall?
i dont have this issue, i don't know why if u look at ce4arab i bosted a pic showed i don't have this issue, i posted also the Arabic.zip the one i am using
andredabomb92 said:
how do you enable apps2sd? no modinstall?
Click to expand...
Click to collapse
it's already included dude to the rom, u don't need modinstall, but u can install it just in case
NICEGYPT said:
it's already included dude to the rom, u don't need modinstall, but u can install it just in case
Click to expand...
Click to collapse
oh okay, i installed it anyways...thx tho
hello every body....
this is first time to me in this forum and i'm new on android world
please i need your help
i have an official update 2.1 update1 at my mobile and i dont need any rom coz i tried many roms there is all have a bug i prefer to be at this firmware.
but the point that i need to have multi touch i cant play angrybird and what about overclock can i get it how ?!?!
please i need help with links and files
I feel so sad when i read things like this.........
freedompals said:
hello every body....
this is first time to me in this forum and i'm new on android world
please i need your help
i have an official update 2.1 update1 at my mobile and i dont need any rom coz i tried many roms there is all have a bug i prefer to be at this firmware.
but the point that i need to have multi touch i cant play angrybird and what about overclock can i get it how ?!?!
please i need help with links and files
Click to expand...
Click to collapse
Next time use search functions on forums before posting like these.
There are threads regarding multitouch development. As of now we don't have this feature yet.
When playing angry birds, I don't use two fingers to play. I can play with single touch with no problems though lol.
Overclocking, use ROMs developed neither by owain94, slade 87, D4rKn3sSyS. Not all custom ROMs have major bugs. The said developers created custom ROMs we can use daily.
or once again use the search function to search on how you can overclock your phone without installing custom ROMs.
Lastly, don't forget those people who created ROMs that you will be using
fictionworld said:
Next time use search functions on forums before posting like these.
There are threads regarding multitouch development. As of now we don't have this feature yet.
When playing angry birds, I don't use two fingers to play. I can play with single touch with no problems though lol.
Overclocking, use ROMs developed neither by owain94, slade 87, D4rKn3sSyS. Not all custom ROMs have major bugs. The said developers created custom ROMs we can use daily.
or once again use the search function to search on how you can overclock your phone without installing custom ROMs.
Lastly, don't forget those people who created ROMs that you will be using
Click to expand...
Click to collapse
sorry sir I did not mean to offend Programmer....i respect him
but really i tried a lot of rom's through i follow the instruction but i faced a lot of bugs and so many restart issue
about the post i wrote it coz there is many subject and you will lost in forum
sorry again
freedompals said:
sorry sir I did not mean to offend Programmer....i respect him
but really i tried a lot of rom's through i follow the instruction but i faced a lot of bugs and so many restart issue
about the post i wrote it coz there is many subject and you will lost in forum
sorry again
Click to expand...
Click to collapse
I'm just telling no need to say sorry lol. I'm just a regular user of their custom ROM too lol. XD
Hmm. Before we customize our ROM we need to know first what's the requirements. What ROMS did you use? And what are your kernel version, android version and build number? You said you're on stock ROMs at the moment right? please do correct me if I'm wrong. xD
ok man thats clear
i followed the instruction every once i install rom i tried
MiniCM6-1.0.0
xCyanogenMini 7
and others i didnt remeber
but alway have so many reboots
i have now
2.1 update 1
m76xx-tsncjolym-53404015
2.1.1.a.0.6
hmm call me noob but uhh, your phone's a mini pro?
MiniCM6-1.0.0
I think the problem is that you are using ROMs which is only made for xperia mini. That's why you're getting a lot of bugs.
Please do correct me if I'm wrong.
Currently I use slades87 work, and its xCyanogen6 for mini pro. It works perfectly for me. Why won't you try that? The infos you gave me suited it actually.
no sir my phone is x10 mini not pro
what's are the exact problems that you are experiencing?
did you do a factory reset before installing the rom?
-factory reset
-wipe stats wipe dalvik-cache
-wipe cache
then try installing custom rom.
do you still have xrecovery installed?
open the zip file of your rom you want to flash with winrar
browse to /system/lib/modules/
highlight x8oc.ko and hit delete
copy zip to your sd again
reflash
be happy
Why need to do this??
Can I do in running room?
slade87 said:
open the zip file of your rom you want to flash with winrar
browse to /system/lib/modules/
highlight x8oc.ko and hit delete
copy zip to your sd again
reflash
be happy
Click to expand...
Click to collapse
axpira said:
Why need to do this??
Can I do in running room?
Click to expand...
Click to collapse
This is only if you have reboots, cuz if you have still reboots on froyo rom, you SHOULD delete overclock module !
x8oc.ko - this module can overclocks Your phone. Overclocking means that it's CPU runs faster than it is for. It is working for someones and do not work for others (!). Could bring dangerous unstableness, reboots.
Wise advice to delete it, but I can't understand why overclock a modROM by default? (if this is the case)
.x.x.x.Peria said:
x8oc.ko - this module can overclocks Your phone. Overclocking means that it's CPU runs faster than it is for. It is working for someones and do not work for others (!). Could bring dangerous unstableness, reboots.
Wise advice to delete it, but I can't understand why overclock a modROM by default? (if this is the case)
Click to expand...
Click to collapse
i've installed a few roms for my mini pro, they came with the max clock at 600mhz, only the overclocked version of slade87 MiniCM came with the max clock at 710 mhz. i don't know any rom for mini (not pro), but i think it should be similar
is possible to add the FM Radio in the rom [ROM 4.1.2] JellyBam - 20121030 [AOKP + CM10 + PARANOID] [3 ROM in 1] [SPACEDROID]
thank you very much
Yes, use Spirit FM.
I apologize
but can you explain how to do this
where can i download the app
or how to make the installation of the spirit fm
thank you
Long awaited answer...
Hitxman said:
I apologize
but can you explain how to do this
where can i download the app
or how to make the installation of the spirit fm
thank you
Click to expand...
Click to collapse
Well, first thing to do is to make an account over at google.com.
next, when all is done with creation of your account, you go over at the nearest playstore ( http://play.google.com/store ) and you click on the search button wich should look much like an magnifying glass and you should enter these as your keywords:
"Spirit FM" (without quotes) and as a search result you will be offered with the much wanted app... You should then click on it and when it opens, you click on install and, voila! You've got it!
Sorry for the sarcasm but I had to do it..
No hard feelings! The instructions are quite explanatory so you should use them!
Have fun listening!
Hitxman said:
is possible to add the FM Radio in the rom [ROM 4.1.2] JellyBam - 20121030 [AOKP + CM10 + PARANOID] [3 ROM in 1] [SPACEDROID]
thank you very much
Click to expand...
Click to collapse
Just update to the latest version 20121101, the change logs claim to have FM Radio now :good:
WiFi Problem!!
When I try to switch wifi on, It is stuck on Turning on wifi..
Please help ASAP.!!!!
kewlkeval said:
When I try to switch wifi on, It is stuck on Turning on wifi..
Please help ASAP.!!!!
Click to expand...
Click to collapse
Reboot and it should be fine
Sent from my potato.
if none of the top comments work.
try downloading a flashable zip and use clockworkmod to flash it, or try to get the apk of it.
07112012 - Jellybam
Hi guys, newbie in the house.
Well basically im new to the custom rom world,well i just flashed jellybam 30102012 last week and saw the new update.
Then i flashed the new one(07112012),i cant boot. Stuck in the boot logo stage.
Help me out?
emzeeraj said:
Hi guys, newbie in the house.
Well basically im new to the custom rom world,well i just flashed jellybam 30102012 last week and saw the new update.
Then i flashed the new one(07112012),i cant boot. Stuck in the boot logo stage.
Help me out?
Click to expand...
Click to collapse
wipe data/factory reset through cwm
Hi,
I would like to prompt that starting from 11.18 update there is no longer way to choose profiles in power off menu when lockscreen is active.
I've no sufficient messages to post in JellyBAM official topic. I hope iGio reads here too.
Battery Drain
I have recently installed the Jellybam Rom on my Galaxy S2, everything is working fine but the battery is draining out almost at the rate of 1% per minute. in nearly 2 1/2 - 3 hours the phone is dead. Please help.
Thanks
:crying::crying::crying::crying::crying::crying::crying:
raasesh said:
I have recently installed the Jellybam Rom on my Galaxy S2, everything is working fine but the battery is draining out almost at the rate of 1% per minute. in nearly 2 1/2 - 3 hours the phone is dead. Please help.
Thanks
:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
whats your kernel?
Terens said:
whats your kernel?
Click to expand...
Click to collapse
My Kernel is 3.0.15-CM-g39df795
installing ip
Hi, guys
I'd like to try the new JellyBAM rom, so find the file put on the internal storage, boot in clockworkmode, and started. everything went well , arrived to the finish. the phone not started up, tried again, but the same situation.and over this I just can start the download mode.
I was on stock rom with clock work mode kernel. Maybe I did soemthing wrong , but what ???
Hopefully I can put back a stock rom with ODIN... after I would like to try again this ROM. Any ideea sugestion how to do it?!
cszabo said:
Hi, guys
I'd like to try the new JellyBAM rom, so find the file put on the internal storage, boot in clockworkmode, and started. everything went well , arrived to the finish. the phone not started up, tried again, but the same situation.and over this I just can start the download mode.
I was on stock rom with clock work mode kernel. Maybe I did soemthing wrong , but what ???
Hopefully I can put back a stock rom with ODIN... after I would like to try again this ROM. Any ideea sugestion how to do it?!
Click to expand...
Click to collapse
after installing jelly bam and if goes into bootloop, just pull the battery and insert. the rom then should complete installing. If you read the jellybam thread about 30 pages back, this method was mentioned.
stucked again
Cosmic Blue said:
after installing jelly bam and if goes into bootloop, just pull the battery and insert. the rom then should complete installing. If you read the jellybam thread about 30 pages back, this method was mentioned.
Click to expand...
Click to collapse
thx for yor reply, I read lots of pages, not all,but I think is too late now. So I coud manage to go back to my stock rom, the phone working OK.
I stucked again Now I need to root my phone , I did it a couple of monts ago, and was no problem ,but now that metod not work anymore...
I dont understand why...
cszabo said:
thx for yor reply, I read lots of pages, not all,but I think is too late now. So I coud manage to go back to my stock rom, the phone working OK.
I stucked again Now I need to root my phone , I did it a couple of monts ago, and was no problem ,but now that metod not work anymore...
I dont understand why...
Click to expand...
Click to collapse
just flash siyah 4.1.5 kernal and your phone will be rooted as siyah roots the phone.
Cosmic Blue said:
just flash siyah 4.1.5 kernal and your phone will be rooted as siyah roots the phone.
Click to expand...
Click to collapse
Now looks more better , I already have instlaled jellybam... will see how its working:fingers-crossed:. thank you for your help
Battery Drain
Does anybody suffer from more than average battery drain on JellyBam? It seems to lose battery way faster than ResurrectionRemix. (I have latest versions of both roms + Doriman 7.27) And btw JellyBam also hangs a lot with Doriman 7.28.
Primary Rom: ResurrectionRemix 3.1.2
Secondary Rom: JellyBam 1.2.0
Kernel: Dorimanx 7.xx
Hello there
Here is the the CM11 made for X10
Still be in alpha 1 as not everything's working
Nearly same bugs as Evervolv 4.4.2 as bugs are due to kernel
Recovery access is working, sdcard mount only in recovery .
To download the ftf file it's here
To enter recovery mod :
wait the 2nd vibration
tap the screen
Don't forget to check "no final verification" in flashtool
Sources are available here on github
Only for unlocked bootloader device
First boot can be long, but cpu frequency is 998 so no problem with oc
Credits : CM Team, FXP for initial repo (tell me if I forgot someone
Good job.
"Envoyé depuis mon C6903 avec Tapatalk"
Tof37, you're the best!
Thanks How about 2.6 kernel? It will act better definetly.. Wish to see what kitkat could realy do on x10..
Thanks a lot
FeraVolt said:
Thanks How about 2.6 kernel? It will act better definetly.. Wish to see what kitkat could realy do on x10..
Thanks a lot
Click to expand...
Click to collapse
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Tof37 said:
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Click to expand...
Click to collapse
as you can see the SurfaceFlinger is the problem ..
W/SurfaceFlinger( 1182): getting VSYNC period from fb HAL: 6535947
W/SurfaceFlinger( 1182): no suitable EGLConfig found, trying a simpler query
F/SurfaceFlinger( 1182): no suitable EGLConfig found, giving up
F/libc ( 1182): Fatal signal 6 (SIGABRT) at 0x0000049e (code=-6), thread 1182 (surfaceflinger)
chack your sources..
Tof37 said:
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Click to expand...
Click to collapse
Thanks dude.. I know my kernel boots but without display.. I said that graphical part needed to be updated to work on 4.x roms since current kernel setup is very "mutant" (GB KGSL - new FB - Tripple Buffering - 32bpp & many many more things..). You may just try to replace whole KGSL and Video/MSM folders with board config & misc updates from scritch v21 kernel.. we will loose 32bpp.. but i think it will be enough... one more thing.. I didn't updated msm_mdp.h it's old. because new verion starves double more PMEM than default and returns black & white camera.. so my video folder is tuned that way.. So i believe it's totally kernel fault.. BUT this setup works perfectly on GB. Maybe you realy can bypass/modify current surfaceflinger.. since current kernel setup is that what i realy want to see in 4.x roms.. I belive that there we will have HW video recording working super fine..
Also I wish to advice you LegacyXperia CM11 sources.. This project is created to be close as much as possible to original CM11 development but is optimized for legacy xperia devices (2011)(things like default browser..torch..data..etc).. Thank you very much...
Boots without problems.
Attached the following dmesg log.
If there's something you're looking for in specific let us know.
Thank you for your ongoing hard work.
Finally got sdcard mount and ums working... will update device tree later .
Got boot with an "old" 2.6.29 kernel.
Have to fix wifi and bt now....
Sent from my XT890 using xda app-developers app
Maybe this is just me, or does anyone also have their sdcard almost wiped out while using this ROM? I'm not sure what caused it, but all that I know is that a lot of my files are missing ever since I booted into this ROM. I remember wiping the data with the recovery from this kernel, but again, I am not sure if that is the cause of it. If not, it might be something else that I did before that, that is why I need to know if anyone else experienced the same thing as me.
I'm not expecting anything from a pre-alpha build, but the fact that it boots and we have a hope alone fascinates me.
Hzu said:
Maybe this is just me, or does anyone also have their sdcard almost wiped out while using this ROM? I'm not sure what caused it, but all that I know is that a lot of my files are missing ever since I booted into this ROM. I remember wiping the data with the recovery from this kernel, but again, I am not sure if that is the cause of it. If not, it might be something else that I did before that, that is why I need to know if anyone else experienced the same thing as me.
I'm not expecting anything from a pre-alpha build, but the fact that it boots and we have a hope alone fascinates me.
Click to expand...
Click to collapse
Strange issue ... didn't noticed that ...
As sdcard was only recognised and mounted in recovery + you may have app installed on your sd, wiping data should be the cause.
Can't be rom installation cause sd is not mounted / recognized in user land.
As Hzu asked, did someone else had this issue ?
Tof37 said:
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
No it must have been something in his phone, i did not have any problems, rom buted fine, and when i returned to feras v37 everything was ok.
Tof37 said:
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
I also do not have any problem with this ROM. Some thing is wrong with him..................................
Kornelije23 said:
No it must have been something in his phone, i did not have any problems, rom booted fine, and when I returned to feras v37 everything was ok.
Click to expand...
Click to collapse
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Dr Goodvibes said:
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Click to expand...
Click to collapse
How good is that room compaired to feras v37, i have tried x10s v9 a long time ago, so is it worth trying it again ?
Tof37 said:
Strange issue ... didn't noticed that ...
As sdcard was only recognised and mounted in recovery + you may have app installed on your sd, wiping data should be the cause.
Can't be rom installation cause sd is not mounted / recognized in user land.
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
Kornelije23 said:
No it must have been something in his phone, i did not have any problems, rom buted fine, and when i returned to feras v37 everything was ok.
Click to expand...
Click to collapse
kamalyaadav said:
I also do not have any problem with this ROM. Some thing is wrong with him..................................
Click to expand...
Click to collapse
Dr Goodvibes said:
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Click to expand...
Click to collapse
I see, thank you for your responses. Something must have happened before I flashed the ROM. Well, a lot of things happened, but I'm glad it's not this ROM that caused it.
Kornelije23 said:
How good is that room compaired to feras v37, i have tried x10s v9 a long time ago, so is it worth trying it again ?
Click to expand...
Click to collapse
um since this alpha alot of things dont work like the wifi/camera/audio/bluetooth/many applications.......and as such is not suited for daily use but its snappy and for a alpha is quite stable .
Any progress bro ????????
or we should forget about this rom, because this is too much wait.
Can someone tell what work/doesn't work, wifi work?
Adigo18 said:
Can someone tell what work/doesn't work, wifi work?
Click to expand...
Click to collapse
Well ...
As wrote in op the rom boots, calls sms mms seem to work but wifi not ...
No camera and many other things don't work.
Since may didn't made any progress with kernel / kitkat based rom due to personnal reasons.
However, this project is not stopped, just can't when I'll be able to do work on it ... sorry
Well..
There's some roms for gts5282 and maybe u guys already tried those out.
Amongst them,one of the most lightweight rom is FAKE_SLIMKAT.
This rom is already $mooth enough to use.But if u guys want ur phone more smooth,just do as I say.
First dload the rom from here..
MAIN THREAD : http://forum.xda-developers.com/galaxy-star/development/update-custom-rom-4-2-2-fakeslimkat-t2955068
Start ur job...
Flash this rom via cwm 6.0.3 or twrp 2.6.3
Latest Cwm for gts5282 : http://forum.xda-developers.com/gal.../recovery-cwm-6-0-5-1-samsung-galaxy-t3235242
After flashing that rom flash this kernel before reboot.
ZD KERNEL V5 :
http://forum.xda-developers.com/gal...ernel-codename-croco-kernel-19-march-t3058404
Now reboot ur phone.
Setup everything.
Then go to root explorer and go to system/app.
Delete holo launcher hd and holo notifier.
Replace it with ur launcher(whatever u like).
But i recommend u to replace with SecLauncher2 by argha.
Dload launcher from here : http://forum.xda-developers.com/galaxy-star/themes-apps/mod-t3134511
Now after replacing launcher,delete bloats that u dont want on ur phone.
I deleted gapps(xcept phonesky nd google login service) coz i dont need them.
Now go to recovery and flash this pure performance hd.
Dload pphd : http://forum.xda-developers.com/showthread.php?t=2295010
Flash this and reboot ur phone.
Now use greenify to freeze apps and save battery/ram.
Credit : To all those guys who dedicating their times to make our phone a little better.
NB : AFTER DOING THIS,MY GTS5282 NEVER USED MORE THAN 220MB RAM,THOUGH I INSTALLED 14 APP WITH 4 BIG GAME ON MY PHONE.
SO,WHY DONT U GIVE IT A TRY...
I dont think remove some gapps from system may smooth ur phone. Couse if you deleted some of the gapps. Some apps will start fc. I dont think thats a good idea.
RendyAK said:
I dont think remove some gapps from system may smooth ur phone. Couse if you deleted some of the gapps. Some apps will start fc. I dont think thats a good idea.
Click to expand...
Click to collapse
I said to keep some.
So that other apps doesnt show fc's.
Thanks for ur feedback.
Hmm alright.
RendyAK said:
Hmm alright.
Click to expand...
Click to collapse
thanks
RendyAK said:
I dont think remove some gapps from system may smooth ur phone. Couse if you deleted some of the gapps. Some apps will start fc. I dont think thats a good idea.
Click to expand...
Click to collapse
attachment added.
This is after installing 14 dloaded app.
ram 138/459
anyone tried¿¡¿¿???
Many threads covering similar topics de-bloating / Pure Performances
ε=мc² said:
Many threads covering similar topics de-bloating / Pure Performances
Click to expand...
Click to collapse
coz its necessary on a phone like gts5282
Did what you say but my gts5282 uses 250mb ram and pphd disables animations which not looking good otherwise thank you
Sorry for my bad english
halfpsycho said:
Did what you say but my gts5282 uses 250mb ram and pphd disables animations which not looking good otherwise thank you
Sorry for my bad english
Click to expand...
Click to collapse
well ...
there shouldnt be any problem.
I attached sshots as proof..
138/459
Hmm, from where should I start... First of all, that kernel combined with that rom is the worst combination ever. Everyone knows that the kernel is made for stock rom and works best with it, not to mention that the overclocking is totally not working even if it somehow worked it doesn't explain why you have low used ram because the overclocking is only effects CPU. Back to the point where you mentioned the low used ram as something "good" while indeed it's not. Ram is where program get stored so the more your ram is full the faster your phone will run. So I'm sorry but this thread is fake af.
Stanwar said:
Hmm, from where should I start... First of all, that kernel combined with that rom is the worst combination ever. Everyone knows that the kernel is made for stock rom and works best with it, not to mention that the overclocking is totally not working even if it somehow worked it doesn't explain why you have low used ram because the overclocking is only effects CPU. Back to the point where you mentioned the low used ram as something "good" while indeed it's not. Ram is where program get stored so the more your ram is full the faster your phone will run. So I'm sorry but this thread is fake af.
Click to expand...
Click to collapse
I don't want to argue with u here.
I will open a new thread to make things clear.
UNWANTED CACHED SERVICES MAKES PHONE SLOWER AND CLEARING RAM FREES THEM.
reserved
BatDroid said:
Well..
There's some roms for gts5282 and maybe u guys already tried those out.
Amongst them,one of the most lightweight rom is FAKE_SLIMKAT.
This rom is already $mooth enough to use.But if u guys want ur phone more smooth,just do as I say.
First dload the rom from here..
MAIN THREAD : http://forum.xda-developers.com/galaxy-star/development/update-custom-rom-4-2-2-fakeslimkat-t2955068
Start ur job...
Flash this rom via cwm 6.0.3 or twrp 2.6.3
Latest Cwm for gts5282 : http://forum.xda-developers.com/gal.../recovery-cwm-6-0-5-1-samsung-galaxy-t3235242
After flashing that rom flash this kernel before reboot.
ZD KERNEL V5 :
http://forum.xda-developers.com/gal...ernel-codename-croco-kernel-19-march-t3058404
Now reboot ur phone.
Setup everything.
Then go to root explorer and go to system/app.
Delete holo launcher hd and holo notifier.
Replace it with ur launcher(whatever u like).
But i recommend u to replace with SecLauncher2 by argha.
Dload launcher from here : http://forum.xda-developers.com/galaxy-star/themes-apps/mod-t3134511
Now after replacing launcher,delete bloats that u dont want on ur phone.
I deleted gapps(xcept phonesky nd google login service) coz i dont need them.
Now go to recovery and flash this pure performance hd.
Dload pphd : http://forum.xda-developers.com/showthread.php?t=2295010
Flash this and reboot ur phone.
Now use greenify to freeze apps and save battery/ram.
Credit : To all those guys who dedicating their times to make our phone a little better.
NB : AFTER DOING THIS,MY GTS5282 NEVER USED MORE THAN 220MB RAM,THOUGH I INSTALLED 14 APP WITH 4 BIG GAME ON MY PHONE.
SO,WHY DONT U GIVE IT A TRY...
Click to expand...
Click to collapse
Sir! I am using cm 13 gts-5282 and I flashed this kernel (zd kernel v5) in my rom but it is not booting. which roms does this kernel supports? What to do ????? please help me!
Mohsin Pathan said:
Sir! I am using cm 13 gts-5282 and I flashed this kernel (zd kernel v5) in my rom but it is not booting. which roms does this kernel supports? What to do ????? please help me!
Click to expand...
Click to collapse
cm 13 don't have extra kernels
zd supports in JB roms
BatDroid said:
cm 13 don't have extra kernels
zd supports in JB roms
Click to expand...
Click to collapse
Sir plz tell me which rom I should flash so that I can use this zd kernel.
Mohsin Pathan said:
Sir plz tell me which rom I should flash so that I can use this zd kernel.
Click to expand...
Click to collapse
All stock or stock modded roms
Zd kernel is too old
u can try psych.halfs kernel with cm11 installed
BatDroid said:
All stock or stock modded roms
Zd kernel is too old
u can try psych.halfs kernel with cm11 installed
Click to expand...
Click to collapse
Sir I downloaded this kernel (psych.halfs) from one source then I flashed it with cm11 rom but that didn't work
Can u please upload link of rom with a kernel? :victory:
I just want a feature of double tap to wake no matter any kernel, no matter any rom just this feature I need sir!
Note:- And one thing to tell you is i m flashing these particular roms as secondary rom in my ext-sdcard.
Mohsin Pathan said:
Sir I downloaded this kernel (psych.halfs) from one source then I flashed it with cm11 rom but that didn't work
Can u please upload link of rom with a kernel? :victory:
I just want a feature of double tap to wake no matter any kernel, no matter any rom just this feature I need sir!
Note:- And one thing to tell you is i m flashing these particular roms as secondary rom in my ext-sdcard.
Click to expand...
Click to collapse
I don't think any of this kernel supports d2w feature