Related
So like most users, I was very excited to hear about the ICS leak by Football since I've been waiting MONTHS for some sort of development on that.
Getting impatient on waiting for CM9 and Evervolv builds for the Amaze, I really wanted to try this new leak for T-Mobile. So I figured that in order to do that, I must get S-Off.
It seemed like a tedious process so I've been holding it off for a while. Now that I've got a copper wire and everything, I wanted to do the deed once and for all.
So I accidentally flashed a stock rom (which I thought was a good thing since the instructions said I needed a stock rom), but I seem to have lost root access. Superuser runs, but battery calibration says I need to have root first and Titanium Backup doesn't work. However, my phone still says unlocked and I can still run ClockworkMod Recovery. The S-Off program tells me that there's an error. Is there anyone that can help?
bri.kwong94 said:
So like most users, I was very excited to hear about the ICS leak by Football since I've been waiting MONTHS for some sort of development on that.
Getting impatient on waiting for CM9 and Evervolv builds for the Amaze, I really wanted to try this new leak for T-Mobile. So I figured that in order to do that, I must get S-Off.
It seemed like a tedious process so I've been holding it off for a while. Now that I've got a copper wire and everything, I wanted to do the deed once and for all.
So I accidentally flashed a stock rom (which I thought was a good thing since the instructions said I needed a stock rom), but I seem to have lost root access. Superuser runs, but battery calibration says I need to have root first and Titanium Backup doesn't work. However, my phone still says unlocked and I can still run ClockworkMod Recovery. The S-Off program tells me that there's an error. Is there anyone that can help?
Click to expand...
Click to collapse
Well you are on T-mobile so you have two choices here. you can S-off if you want to have total freedom or you can revert your phone to stock and relock your bootloader and flash it and then re-unlock again. but remember flashign this without s-off may prevent you from getting s-off later on.
Ray196 said:
Well you are on T-mobile so you have to choices here. you can S-off if you want to have total freedom or you can revert your phone to stock and relock your bootloader and flash it and then reunlock again.
Click to expand...
Click to collapse
Well, I can't flash the PH85IMG without S-Off, right? Because on the HBoot screen, it would load the file but i wouldn't be asked if I wanted to install it. So I had no idea what to do. I thought I had to have S-Off to install it. Does this really mean I've lost root even though my phone says unlocked and I can run Clockworkmod?
bri.kwong94 said:
Well, I can't flash the PH85IMG without S-Off, right? Because on the HBoot screen, it would load the file but i wouldn't be asked if I wanted to install it. So I had no idea what to do. I thought I had to have S-Off to install it. Does this really mean I've lost root even though my phone says unlocked and I can run Clockworkmod?
Click to expand...
Click to collapse
you can if you lock your boot loader and revert the phone to stock.
Ray196 said:
you can if you lock your boot loader and revert the phone to stock.
Click to expand...
Click to collapse
Well, how do i revert it to stock and reroot it exactly?
bri.kwong94 said:
Well, how do i revert it to stock and reroot it exactly?
Click to expand...
Click to collapse
i think you can use this. http://forum.xda-developers.com/showthread.php?t=1493905
bri.kwong94 said:
Well, how do i revert it to stock and reroot it exactly?
Click to expand...
Click to collapse
Pretty sure you just use fastboot to lock, open a command prompt with your phone attached in debugging mode, type in fastboot oem lock, then install the stock rom listed in the development section. (If I am wrong on this, someone please feel free to correct me.)
Hi Guys,
I feel strange, in that I have been rooting phones since the g1 (and literally every other android device on tmobile & sprint since then) and I've never run into this:
I was running Eternity rom, but wanted to send the device in for a warranty repair, so I followed the available instructions to take my Evo3d back to stock. Everything seemed to go fine, except that now the phone will ONLY boot into the bootloader.
I did re-lock the bootloader as per the instructions here on xda, so now at the top of the screen i get:
Relocked
Security Warning!
and S-On ( i was never s-off)
Does anyone know of a way to get me back up and running? Btw, it was the PG86IMG.zip ruu 2.17 u flashed.
Im in a big jam here now...no phone for work purposes
wards.jfasa said:
Hi Guys,
I feel strange, in that I have been rooting phones since the g1 (and literally every other android device on tmobile & sprint since then) and I've never run into this:
I was running Eternity rom, but wanted to send the device in for a warranty repair, so I followed the available instructions to take my Evo3d back to stock. Everything seemed to go fine, except that now the phone will ONLY boot into the bootloader.
I did re-lock the bootloader as per the instructions here on xda, so now at the top of the screen i get:
Relocked
Security Warning!
and S-On ( i was never s-off)
Does anyone know of a way to get me back up and running? Btw, it was the PG86IMG.zip ruu 2.17 u flashed.
Im in a big jam here now...no phone for work purposes
Click to expand...
Click to collapse
im going to say a bad ruu re unlock and start over i dont know if its on xda too but on scotts roms site it has info to lock without the re locked showing good luck
I am having the same problem, but I found a way around it. If I boot the kernel through fastboot it will boot up. (You'd need to re unlock). My hboot doesn't really work anymore..
------
3(d)vo one s
Newts my hero.
evo bryan said:
im going to say a bad ruu re unlock and start over i dont know if its on xda too but on scotts roms site it has info to lock without the re locked showing good luck
Click to expand...
Click to collapse
Im not even sure at this point how to re-unlock it. i am wondering if i should have flashed to an older ruu though.
How do I extract the kernel from the ruu? or is there a download available? I have searched....just cannot find it.
wards.jfasa said:
How do I extract the kernel from the ruu? or is there a download available? I have searched....just cannot find it.
Click to expand...
Click to collapse
flashimage gui is able to do it inside android, im guessing it stores it in a tempory folder, let me see if i can find the temp folder where it stores before rebooting to flash it...........brb
did you check this post http://forum.xda-developers.com/showthread.php?t=1627897
This helped me out when I was Juopunutbear S-OFF'ing my phone. But I was at Hboot 1.50.
http://androidforums.com/evo-3d-all...mware-upgrade-ruu-flash-unbricking-guide.html
Pretty good guide.
wards.jfasa said:
Hi Guys,
I feel strange, in that I have been rooting phones since the g1 (and literally every other android device on tmobile & sprint since then) and I've never run into this:
I was running Eternity rom, but wanted to send the device in for a warranty repair, so I followed the available instructions to take my Evo3d back to stock. Everything seemed to go fine, except that now the phone will ONLY boot into the bootloader.
I did re-lock the bootloader as per the instructions here on xda, so now at the top of the screen i get:
Relocked
Security Warning!
and S-On ( i was never s-off)
Does anyone know of a way to get me back up and running? Btw, it was the PG86IMG.zip ruu 2.17 u flashed.
Im in a big jam here now...no phone for work purposes
Click to expand...
Click to collapse
The security warning is because you are using a custom rom so will not be able to use the RUU through the bootloader.
What you need to do is download the RUU_Shooter_S_Sprint_WWE_2.17.651.5_Radio_1.06.00. 1216_signed.exe from here
http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209
If you then run that exe while your phone is in fastboot and connected to your pc it will factory reset your phone and put you back on stock rom and kernel.
I successfully installed Fresh Evo LTE 5.3.1 on my phone.
One of the suggestions is to update the Radio but I'm having a tough time doing that.
Here are my specs:
HBOOT 1.15.0000
S-ON
FreshEVO 5.3.1 ROM
I went to the link from the FreshEVO LTE 5.3.1 page to update the radio and have tried the following to install the Radio:
Attempt 1
Downloaded the Full Firmware zip file
Rename it "PJ75IMG"
Place it in the root of my SD card
Reboot into Bootloader
The PJ75IMG.zip file is detect but I only get 'Parsing PJ75IMG.zip' and then the Fastboot, Recovery, etc. options are displayed.
Attempt 2
From the same page where I downloaded the Full Firmware zip file, I also tried:
Download the Boot.img Only (signed) file
Flash it through the command prompt while in Fastboot ("fastboot flash boot boot.img")
Go into Bootloader
The PJ75IMG.zip is detected but still get the "Parsing..." message and nothing else happens.
Attempt 3
I have also tried going into my TWRP recovery and installing the Full Firmware zip AND the Radio 1.12.11.0809 Only.zip file but the installation fails.
Any pointers or a link to a video or a post would be much appreciated.
Thanks and sorry if this is a duplicate post but I really couldn't find any post that showed step-by-step process.
revert to stock and accept the ota, you can then fastboot recovery again and reflash. hboot 1.15 can not directly flash any firmware
edit: you may have to relock your hboot but ive seen users state they didnt. if you decide to relock the phone you will have to unlock the bootloader again to enable fastboot
om4 said:
The easiest way to update your firmware is to revert to stock and accept the ota, you can then fastboot recovery again and reflash
Click to expand...
Click to collapse
I don't have my stock backup anymore.
I've heard stuff about using RUU or something like that. Any quick guide on how to revert back to stock?
DO NOT UNROOT TO ACCEPT THE OTA OR RUU
I'd highly suggest just staying with your current radios and waiting for S-OFF before trying to update the radios. You can still flash the new ROMS in the meantime
You cannot update radios or firmware with Hboot 1.15 or 1.19------->Thats why it is suggested and not required
Rxpert said:
DO NOT UNROOT TO ACCEPT THE OTA OR RUU
I'd highly suggest just staying with your current radios and waiting for S-OFF before trying to update the radios. You can still flash the new ROMS in the meantime
You cannot update radios or firmware with Hboot 1.15 or 1.19------->Thats why it is suggested and not required
Click to expand...
Click to collapse
Thanks for the warning.
Since I'm pretty new to all this, I'll play it safe and stick to what I have.
sorry guys internet crapped out and i got stuck trying to post lol. rxpert has a point but with so much negativity about s-off never coming I'm starting to consider taking the OTA.
also you should always have a back up, its your go to solution when nothing else seems to be working since its a back up of when everything was new and working be it stock or custom
The new radios aren't worth losing the possibility, no matter how small
Sent from my EVO using Tapatalk 2
True...
om4 said:
sorry guys internet crapped out and i got stuck trying to post lol. rxpert has a point but with so much negativity about s-off never coming I'm starting to consider taking the OTA.
also you should always have a back up, its your go to solution when nothing else seems to be working since its a back up of when everything was new and working be it stock or custom
Click to expand...
Click to collapse
Just so I am clear, I too am 1.5 so if have my orginal rom, (the one after I unlocked my bootloader) i can restore it and accept the OTA without having to relock my phone? (it wont brick):good: Or do i have some other steps to take, I read the don't panic instructions, but it only mentioned what the OTA does ( relocks with a new rom) but nothing about what happens if I don't relock before I accept the OTA, I know i seem a bit slow, 4g lte isn't as interesting as OG 4g without S-off.
RamesisX said:
Just so I am clear, I too am 1.5 so if have my orginal rom, (the one after I unlocked my bootloader) i can restore it and accept the OTA without having to relock my phone? (it wont brick):good: Or do i have some other steps to take, I read the don't panic instructions, but it only mentioned what the OTA does ( relocks with a new rom) but nothing about what happens if I don't relock before I accept the OTA, I know i seem a bit slow, 4g lte isn't as interesting as OG 4g without S-off.
Click to expand...
Click to collapse
I havent yet done it myself but users have said they didnt need to relock, how ever as captain said there is no real need to update right now. If you decide to go ahead it would be a good idea to relock ( fastboot oem lock ) just to make sure, you can unlock afterwards. I neglect to mention this in my guide because most phones now are on 1.19 anyway and those still on 1.15 are holding out for soff
You will want to have the stock recovery to take the ota. Most people do this by relocking and running the ruu
Once again, I'm providing the info but I don't recommend it
Sent from my EVO using Tapatalk 2
Rxpert said:
You will want to have the stock recovery to take the ota. Most people do this by relocking and running the ruu
Once again, I'm providing the info but I don't recommend it
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I am still researching how to relock without issues. I have my orginal rom but still leary about the entire relocking process. I was hoping i could restore to orginal sense rom, then take the OTA. otherwise I am looking for the simplest way to accompish the relocking task, but frankly nothing is easy when i comes to playing around with 4g lte, except it is rather difficult to brick. With my luck i might succeed in that LMAO
:good::laugh:
RamesisX said:
I am still researching how to relock without issues. I have my orginal rom but still leary about the entire relocking process. I was hoping i could restore to orginal sense rom, then take the OTA. otherwise I am looking for the simplest way to accompish the relocking task, but frankly nothing is easy when i comes to playing around with 4g lte, except it is rather difficult to brick. With my luck i might succeed in that LMAO
:good::laugh:
Click to expand...
Click to collapse
there is no simpler method for relocking hboot, simply fastboot oem lock
om4 said:
there is no simpler method for relocking hboot, simply fastboot oem lock
Click to expand...
Click to collapse
Used that and it worked great.
Evo 4G LTE
h-boot 1.19, s-on, HTCDev unlocked
I am trying to get ICS on my Amaze. I am with Telus and have an S-On phone
I am trying to use this method
Originally Posted by superevilllama View Post
flash stock recovery
relock phone (fastboot oem lock)
flash rom update in bootloader (rename ruu to ph85img.zip, place on sd card and boot to bootloader)
unlock with htc tool
flash custom recovery
flash superuser package
done!
Click to expand...
Click to collapse
But i do not have the stock recovery and unsure how to get it.
I tried skipping the step and just going from re-locking phone to updating from bootloader but I get a CID incorrect error.
Any help is appreciated, I have never had so much trouble updating a ROM
PS.
I wasn't aware so much was needed to upgrade from my BulletProof ROM to this ROM, I just flashed like I would have before and now I am in an HTC Boot loop
dibarreir said:
I am trying to get ICS on my Amaze. I am with Telus and have an S-On phone
I am trying to use this method
But i do not have the stock recovery and unsure how to get it.
I tried skipping the step and just going from re-locking phone to updating from bootloader but I get a CID incorrect error.
Any help is appreciated, I have never had so much trouble updating a ROM
PS.
I wasn't aware so much was needed to upgrade from my BulletProof ROM to this ROM, I just flashed like I would have before and now I am in an HTC Boot loop
Click to expand...
Click to collapse
It's right in the stickies man...
http://forum.xda-developers.com/showthread.php?t=1575550
Sent from my
NRGized amaze
powered by Faux
I went through that, but the RUU is an exe, or do I rename the OTA zip file to PH85IMG.
When I went through this process it loaded PH85IMG, did the check and then nothing. Never asked me to update or anything. I wouldn't have posted to ask for help if I didn't need it.
dibarreir said:
I went through that, but the RUU is an exe, or do I rename the OTA zip file to PH85IMG.
When I went through this process it loaded PH85IMG, did the check and then nothing. Never asked me to update or anything. I wouldn't have posted to ask for help if I didn't need it.
Click to expand...
Click to collapse
No. Connect your phone and flash the EXE. PH85IMG is ONLY for T-Mobile Users. Everyone else uses an EXE.
LMAO some things never change
Good luck with ICS
Sent from my SGH-T999 using Tapatalk 2
Thanks for your help! I have never felt like such a noob....I swear I am actually good with tech lol
So I managed to get my phone flashed, thanks for all of your help, but I thought the flash was suppose to upgrade me to ICS, but it installed a stock 2.3.4 I am so confused. After flashing the EXE am I suppose to use the OTA.zip? If so, from what I am reading I need to S-OFF.
I tried installing CM9 after the flash and I am able to boot, but once its loads and begins the initial setup it freezes on the Select Language screen and reboots. I have searched the forum and no luck.
Hi guys.
I was trying to do one of two things. Either get to stock ICS with the RUU or get to an older stock version so that my phone would update itself.
I ran the ICS RUU and ran into an issue. Im on Hboot 2.28 Radio 2.23.10.0123r/2.23.10.0124r
I am S-On and relocked to get run the RUU.
I got an error as it said the Hboot version is older. Now I am stuck on the Bootloader with TAMPERED, RELOCKED, and Security Warning.
I should have known that I potentially had a leaked Hboot version but it was so long ago I forgot.
What can I do? Iv been googling and searching threads without much luck. Do I have to S-off? Can I S-off from this position? The other issue I keep running into is dead file links.
brownsfan said:
Hi guys.
I was trying to do one of two things. Either get to stock ICS with the RUU or get to an older stock version so that my phone would update itself.
I ran the ICS RUU and ran into an issue. Im on Hboot 2.28 Radio 2.23.10.0123r/2.23.10.0124r
I am S-On and relocked to get run the RUU.
I got an error as it said the Hboot version is older. Now I am stuck on the Bootloader with TAMPERED, RELOCKED, and Security Warning.
I should have known that I potentially had a leaked Hboot version but it was so long ago I forgot.
What can I do? Iv been googling and searching threads without much luck. Do I have to S-off? Can I S-off from this position? The other issue I keep running into is dead file links.
Click to expand...
Click to collapse
So I think I found out what I did. 2.28 is the Global version. I must of rooted that version and flashed roms. I wanted to unroot and get back to stock software version.
Where should I go from here? Is there an RUU for the ICS Global? I can not seem to find one.
Have you tried unlocking the bootloader again?
Edit: I searched for a long time (a few days ago) but couldn't find any information on S-Off, not going back to stock for people on the latest OTA. I'm not the best person to give advice, but if you're on the current OTA, I don't think you can use the RUU.exe.
Also, you can't downgrade if you're S-On - only upgrade..
Sent from my ADR6425LVW using xda app-developers app
Thingula said:
Have you tried unlocking the bootloader again?
Edit: I searched for a long time (a few days ago) but couldn't find any information on S-Off, not going back to stock for people on the latest OTA. I'm not the best person to give advice, but if you're on the current OTA, I don't think you can use the RUU.exe.
Also, you can't downgrade if you're S-On - only upgrade..
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Yes I can unlock again and that does get me unstock from the boot screen but still cant get where I want. Hmm.
I wonder if you can fastboot-flash the older kernels, using a computer, then flash the old stock ROM, lock the bootloader, then run an RUU.. Can anyone confirm this? Sounds too simple to work on an HTC phone.
Edit: No, of course that doesn't work. Sorry, I can't really offer any more help.. I'll have to just hope that someone more knowledgeable can take over.
Sent from my ADR6425LVW using xda app-developers app
Be prepared, I get rather long winded.
If you were on the most current 4.05.605.14 with S-on which based on what you list as the radios and hboot is what it appears you were on, then you are in a difficult spot. The really bad news is the only RUU you would be able to use is the 4.05.605.14 and no one has admitted to being able to get ahold of. The most current one available is 3.14.605.12 but that is useless to you. You would have to S-off to go back to stock but would have to have a working rom to do it. It's not impossible but it aint easy. I just had to do it about a month ago when I was trying to S-off my replacement Rezound. It came with the most current stock ROM and I didn't bother reading up on the current ControlBear method. In the past, you had to have a rooted rom in order to S-off. So of course, I unlocked the bootloader, flashed AmonRa 3.15 and then used superuser to root it and then went about trying to S-off. I couldn't find my previous windows based versions of ControlBear so I went about making a live cd ubunto disk and trying to S-off. It wouldn't work. Then I read the unlimited.io site instructions and found that the current version needs the unrooted stock rom to succeed. I really never paid attention to unrooting before because if I had to do it, I could always just run the factory wipe and root would be gone but not this time. It kept showing that I was rooted. So I tried wiping data, cache, dalvik cache, and after that didn't work, I wiped the system. Very bad move on my part. Now I couldn't get past the bootloader. I thought I was done for because I knew with S-on, there was no going back and the global rom RUU was still not available.
After trying all kinds of things I ended up
1. downloading the 4.05.605.14 stock rooted rom listed HERE (Thanks MicroMod777) in the Rezound Development section.
2. Then downloaded the current firmware.zip from HERE (Thanks Flyhalf205) and then extracted the recovery.img along with the hboot .nb0 file from it.
3. I then created 2 separate custom ph98img.zip for each so I could always reinstall the stock hboot and the stock recovery.img.
4. I extracted the boot.img from the rooted rom and flashed that first. I don't remember if I did it via adb in fastboot usb or with another ph98img.zip and then
5. I made sure that my bootloader was unlocked and then installed AmonRa as the recovery
6. Then used AmonRa to flash the stock rooted zip file. I then wiped the cache 3 times and the dalkvik cache 3 times.
I let the phone reboot and I was back to a working phone.!!! Then I found out that it was rooted with SuperSu which gives you the option of doing a full permanent unroot which I did. I then put that ph98img that I had made that had the stock recovery.img on it and flashed that in the bootloader. After rebooting I now had a fully stock phone and proceeded to do the S-off. I left the bootloader unlocked as directed by the unlimited.io site. I had limited experience with ubunto but found THIS PAGE that helped walk me through it. I followed it exactly and ended up with an S-off phone. One thing that wasn't clear to me was how to open a terminal in ubunto but I figured that out after trial and error. IIRC, I clicked on the home tab on the left and then in the search box, typed terminal. The first icon that was shown was a terminal emulator and I used that for the commands.
Now I still wasn't finished. I ended up relocking the bootloader but didn't like the relocked and tampered flags that were showing. So I ended up running the most recent RUU (3.14.605.12 found HERE and I now had a ***LOCKED*** bootloader and then let the phone reboot. After it rebooted, I hit the home key and bypassed the setup. I then got into settings and then into software update and let it update. It did a small update and then had to repeat the reboot, bypass setup, and software update. This time it did the global update. I let it reboot but this time, I ran the setup. Once I was up and running, I again went into bootloader and reinstalled AmonRa and used the 3.16 version and made sure to do a nandroid before doing anything further. After that, I got ahold of SuperSu 1.51 and flashed that in the AmonRa recovery. I now had a ***LOCKED*** stock rooted Rezound and several nandroid backups of both fully stock and rooted. Which turned out to be a great idea because not even 3 weeks later after this, the phone started malfunctioning (power button) and a problem with the camera so it got replaced and I had to put it back fully stock. I was already setup for this. I unrooted, put the stock recovery back on, and made it S-on. When the replacement came, I immediately unlocked it, did the S-off (only took one try), relocked, ruu'd back to 3.14.605.12, updated to global rom, flashed AmonRa, and restored with my most recent rooted nandroid. and I am back up and running a whole lot sooner...
I hope this helps.
Very much so! Thank you. If I could hit the thanks button 10x I would.
Im sure im not the only only to have the Hboot 2.28 issue.
hey man you still around ? i need some help with a situation like this
dust906 said:
hey man you still around ? i need some help with a situation like this
Click to expand...
Click to collapse
I replied to you in your thread.
S-On Locked stock !
mikeyk101 said:
Be prepared, I get rather long winded.
If you were on the most current 4.05.605.14 with S-on which based on what you list as the radios and hboot is what it appears you were on, then you are in a difficult spot. The really bad news is the only RUU you would be able to use is the 4.05.605.14 and no one has admitted to being able to get ahold of. The most current one available is 3.14.605.12 but that is useless to you. You would have to S-off to go back to stock but would have to have a working rom to do it. It's not impossible but it aint easy. I just had to do it about a month ago when I was trying to S-off my replacement Rezound. It came with the most current stock ROM and I didn't bother reading up on the current ControlBear method. In the past, you had to have a rooted rom in order to S-off. So of course, I unlocked the bootloader, flashed AmonRa 3.15 and then used superuser to root it and then went about trying to S-off. I couldn't find my previous windows based versions of ControlBear so I went about making a live cd ubunto disk and trying to S-off. It wouldn't work. Then I read the unlimited.io site instructions and found that the current version needs the unrooted stock rom to succeed. I really never paid attention to unrooting before because if I had to do it, I could always just run the factory wipe and root would be gone but not this time. It kept showing that I was rooted. So I tried wiping data, cache, dalvik cache, and after that didn't work, I wiped the system. Very bad move on my part. Now I couldn't get past the bootloader. I thought I was done for because I knew with S-on, there was no going back and the global rom RUU was still not available.
After trying all kinds of things I ended up
1. downloading the 4.05.605.14 stock rooted rom listed HERE (Thanks MicroMod777) in the Rezound Development section.
2. Then downloaded the current firmware.zip from HERE (Thanks Flyhalf205) and then extracted the recovery.img along with the hboot .nb0 file from it.
3. I then created 2 separate custom ph98img.zip for each so I could always reinstall the stock hboot and the stock recovery.img.
4. I extracted the boot.img from the rooted rom and flashed that first. I don't remember if I did it via adb in fastboot usb or with another ph98img.zip and then
5. I made sure that my bootloader was unlocked and then installed AmonRa as the recovery
6. Then used AmonRa to flash the stock rooted zip file. I then wiped the cache 3 times and the dalkvik cache 3 times.
I let the phone reboot and I was back to a working phone.!!! Then I found out that it was rooted with SuperSu which gives you the option of doing a full permanent unroot which I did. I then put that ph98img that I had made that had the stock recovery.img on it and flashed that in the bootloader. After rebooting I now had a fully stock phone and proceeded to do the S-off. I left the bootloader unlocked as directed by the unlimited.io site. I had limited experience with ubunto but found THIS PAGE that helped walk me through it. I followed it exactly and ended up with an S-off phone. One thing that wasn't clear to me was how to open a terminal in ubunto but I figured that out after trial and error. IIRC, I clicked on the home tab on the left and then in the search box, typed terminal. The first icon that was shown was a terminal emulator and I used that for the commands.
Now I still wasn't finished. I ended up relocking the bootloader but didn't like the relocked and tampered flags that were showing. So I ended up running the most recent RUU (3.14.605.12 found HERE and I now had a ***LOCKED*** bootloader and then let the phone reboot. After it rebooted, I hit the home key and bypassed the setup. I then got into settings and then into software update and let it update. It did a small update and then had to repeat the reboot, bypass setup, and software update. This time it did the global update. I let it reboot but this time, I ran the setup. Once I was up and running, I again went into bootloader and reinstalled AmonRa and used the 3.16 version and made sure to do a nandroid before doing anything further. After that, I got ahold of SuperSu 1.51 and flashed that in the AmonRa recovery. I now had a ***LOCKED*** stock rooted Rezound and several nandroid backups of both fully stock and rooted. Which turned out to be a great idea because not even 3 weeks later after this, the phone started malfunctioning (power button) and a problem with the camera so it got replaced and I had to put it back fully stock. I was already setup for this. I unrooted, put the stock recovery back on, and made it S-on. When the replacement came, I immediately unlocked it, did the S-off (only took one try), relocked, ruu'd back to 3.14.605.12, updated to global rom, flashed AmonRa, and restored with my most recent rooted nandroid. and I am back up and running a whole lot sooner...
I hope this helps.
Click to expand...
Click to collapse
This guide was FREAKING AWESOME. It led me to finally after 2 years go S-Off (wire trick) to do RUU, etc. Have to return phone and have already got replacement. Crossed my fingers and everything looks stock stock stock !