This is my first post. I wanted to post a reply on a forum where I saw people asking about this problem but because I have not yet posted enough I was unable to post on that forum.
I have a Galaxy S3 I9300, rooted and running Resurrection Remix v3.1.2 with JellyBean 4.1.2 and kernel version 3.0.31-Siyah-1.7rc1+. I love Resurrection Remix and was really disappointed with Samsung's Touchwizz UI, even the JellyBean 4.1.1 version. Today while using the camera I encountered an error. It started when I tried to take a picture and the a popup appeared, "Unfortunately Gallery has stopped". I tapped OK and then tried to reopen the camera but got the following error: "Camera Error: Cannot connect to camera," after which the camera app closes.
I have seen posts about this here: http://forum.xda-developers.com/showthread.php?p=36491568 and I am aware that you can flash a custom camera app: http://forum.xda-developers.com/showthread.php?t=1746611, which I will try. I also saw some people say that upgrading to the latest version of Resurrection Remix fixes the problem, but I don't want to do that because, correct me if I'm wrong, but the ROM is still work in progress and not ready for daily use. I tried clearing just gallery's app data but that did not work for me and I did not want to do a complete data wipe or reflash the ROM.
I found a quick solution if you are also encountering this problem. Power off and boot into recovery mode (hold volume up, home and power buttons until you see the recovery screen). Using the volume up and down button to navigate options and the home button to select options select the following: wipe cache -> yes, wipe cache -> reboot phone now. The phone will reboot and then you will be able to use the camera again.
Related
Hi. This is first time I rooted and changed something to my phone's core system. I bootloaded through Flashtool and got in the newest kernel, ROM and GApps from this thread: http://forum.xda-developers.com/showthread.php?t=1613017 and my baseband is 77 (http://www.mediafire.com/?1oyztnqww22bgek). Things looked fine and my system was working as it should. But soon I was starting to see these bugs:
Screen moving from left to right and back at recovery menu on vol up/down press. Not a big bug though, still possible to work with the menu and read the text.
No lockscreen. Tried all the lockscreen options at settings, but power button still just turns the screen on and off. I can only see the lockscreen right after I reboot my phone and before I enter the PIN, the wheel works as I've set it but then I can't get into the lockscreen anymore.
Strange menu button functionality. Firstly, when I was in the home screen and pressed the menu button, a menu with system settings popped up. Now nothing happens, for both HW and SW buttons. Since the time it worked I was just messing with settings but I'm sure I didn't disable anything like that.
Browser and Google Play not working, Play says RH-01 error, browser just crashes. GMail works.
Tilt not working properly. It did after the fresh install, but now it works only for menus, not for homescreen like it did before. I've tried running a widesecreen-only game but it's being displayed in normal, portrait mode- with errors. Enabling/disabling the tilting didn't help.
And I believe that there are more bugs I didn't mention. I did everything as told in this article http://www.theandroidsoul.com/aokp-xperia-neo/, just with getting the newest links instead of the ones provided. I installed the Hallon version of AOKP and I was running GB 2.3.4 before, if that helps. And like I said- I am doing it for the first time so I am quite new to these things, so firstly sorry if I didn't mention anything important and please describe the steps about how to fix it a little bit more detailed. Thanks!
Hi..
That ROM is legend sometimes ago,and dont have problems like you said.
The step I did was like this :
1. Flash full firmware ICS(.ftf file)with flashtool.
2.Flash kernel
3. Flash ROM
4. Flash Gapps
5. Flash Add-on if any
Enjoy
Sent from my Xperia Neo V
MT15i_4.1.B.0.587_Global.ftf ICS firmware and hallon kernel flashed through Flashtool, then rebooted into system. Then in revocery I wiped cache, dalvik and reseted to factory, installed the newest AOKP ROM, installed GApps, booted into system. My screen is still moving from sides as the screen refreshes in recovery. But after booting, still the same issues persist...
Inside the old recovery,screen dancing is known issue,try Flash other kernel,no harm changing kernel.
Can you provide,Aokp ROM version and kernel you have..
Sent from my Xperia Neo V
AOKP Hallon JB Milestone 1
I tried the CM10.1 and my recovery menu fixed but the bugs weren't fixed, so then I flashed the CM10 and my recovery menu changed again, now with black background and again, fixed animations. But then my device bricked so I flashed again the MT15i_4.1.B.0.587_kernel.ftf.
Couldn't you just send me links to a working combination of kernel-firmware with AOKP? The requirements says I need baseband 72/77, do you have any links or tips for these? I've tried several combinations but just none really worked, now I am on stock laggy JB 4.0.4 and I have no idea what to try now...
Hi,
I'm on PA 3.56, Baseband 1545VRUAMDK, kernel 3.4.0-cyanogenmod-gba 15d0b, build pa_jfltevzw-userdebug 4.2.2 JDQ39
My Full Screen mode becomes disabled whenever i enter into any app, and then back to enabled when returning to the home screen (details below). I understand the ROM is still in development, but if anyone can advise a fix to this prior to the next release it would be greatly appreciated.
Three days ago I installed PA version 3.56 on my Verizon Galaxy S4 via clockwork recovery. I had been using the Pie controls without any bugs for about 24 hours and then I began to notice that the full screen mode would disable when I enter into any application, then back to enabled when I return to the home-screen. I know it is not the specific application that is incompatible with pie because i can enable full screen while in the app and it works. I've ruled out any frozen applications by defrosting and the problem persists.
Additionally, this may or may not be related, but when i reboot, re-start launcher, or restore hybrid preferences, i can then not go back into hybrid properties until i restore paranoid preferences via titanium. I am prompted 'unfortunately settings has stopped.' Occasionally the same thing happens to system UI, and always to the camera. I can not use camera on PA 3.56
After this happened, i noticed also that even when I checked 'enable search button on pie controls,' in the toolbar settings, the search button would not be present until i restored hybrid preferences, and then disappear again after some time. When I restore hybrid preferences and reboot, startup occasionally hangs at samsung galaxy. I have to do a battery pull to reboot.
Any insight appreciated
Just flashed the uXylon rom to a brand new N4, using CWM.
The problems I'm getting are:
Browser tries to open and does opening animation and short press vibration, but doesn't open
Navigating/Navigation ring hovers over home button and home button unusable, though vibrates on press
Trying to download GApps or anything else through Goo.im or CWM just doesn't work.
I tried looking through the uXylon official thread and couldn't find any answers, and tried the basics of going through settings and wiping cache & dalvik. None of this did a thing, and the N4 Toolkit by Mark Skippen couldn't even reflash the stock ROM.
Absolutely anything I'm missing would be extremely appreciated.
Hello,
I would like to apologize in advance if the question was posted before, the description is too brief or anything like that since it is my first post here (although I had searched for similar questions but didn't find any with a proper solution).
After installing CM10.2 with GApps on my Galaxy S2 i9100 (actually, before that I tried Firefox OS which messed up my /data, had to repartition manually and it helped then) I tried to install - and run - Triangle Away, but it froze. Then I made a terrible mistake imo: I rebooted. After that (I mean, after flashing CM again since it didn't work at all) I got an issue with the screen going black after unlocking the phone or apps freezing (running launcher, going to 'system settings' etc; tested on Trebuchet, haven't tried any other launcher so far). I also had a problem (again) with broken datafs, but used patched PIT from somewhere in here, I will edit out that post and paste the url to the thread.
Another thing that should be mentioned is that that status/notification bar is working without any problems when the launcher freezes, and when the screen goes black the 'back' and 'menu' buttons give feedback when pressed (they make the phone vibrate but when I press volume up/down there is no sound).
I've already tried doing wipe data/factory reset, cleaning cache and dalvik and wiping system with flashing CM again but without any progress. Also wanted to check adb logcat, but I cannot get into usb debugging settings (launcher freezes when 'system settings' is pressed).
What could be the solution?
Thank you very much for any answers!
Hi guys,
Please help me out. I wanted to change memory so my Samsung Galaxy Tab 10.1 (WiFi) runs faster and Install KitKat ROM on Galaxy Tab 10.1! I followed this video :How to Install KitKat ROM on Galaxy Tab 10.1! - "i cant post the link because am new"
"
I manage to do everything, but I did mistake of using twrp and erase everything.
Now when my galaxy starts it stops at the "Samsung Galaxy TAb 10.1" screen.
When I reboot holding off button and up arrow - nothing happens
When I reboot holding off button and down arrow it goes back to twrp
Even my computer doesnt detect it any more. Can anyone please help me.
Thank you
chuuu143 said:
Hi guys,
Please help me out. I wanted to change memory so my Samsung Galaxy Tab 10.1 (WiFi) runs faster and Install KitKat ROM on Galaxy Tab 10.1! I followed this video :How to Install KitKat ROM on Galaxy Tab 10.1! - "i cant post the link because am new"
"
I manage to do everything, but I did mistake of using twrp and erase everything.
Now when my galaxy starts it stops at the "Samsung Galaxy TAb 10.1" screen.
When I reboot holding off button and up arrow - nothing happens
When I reboot holding off button and down arrow it goes back to twrp
Even my computer doesnt detect it any more. Can anyone please help me.
Thank you
Click to expand...
Click to collapse
Hello I am new in this forum. And i have the same problem.
"E:System is not installed - preventing reboot!"
I am able to push the on/off button and to turn in the following 2 options.
1.) DOWLOADING MODE
2.) TWRP TEAMWIN RECOVERY PROJECT VERSION 2.2.0 (within this I have many options like, install, backup, restore, Wipe, Mount Settings, Advanced and so on.)
If i only turn on the Tablet P7500 i get errore message at the screen:
"FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN"
I have installed KIES but the TABLET has been recognised!!
I wanted to install ROM of this post
Thanks for your help in advance.
AAMMJJ31 said:
Hello I am new in this forum. And i have the same problem.
"E:System is not installed - preventing reboot!"
I am able to push the on/off button and to turn in the following 2 options.
1.) DOWLOADING MODE
2.) TWRP TEAMWIN RECOVERY PROJECT VERSION 2.2.0 (within this I have many options like, install, backup, restore, Wipe, Mount Settings, Advanced and so on.)
If i only turn on the Tablet P7500 i get errore message at the screen:
"FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN"
I have installed KIES but the TABLET has been recognised!!
I wanted to install ROM of this post
Thanks for your help in advance.
Click to expand...
Click to collapse
Your best bet in my opinion, is reinstalling the stock firmware with Odin and your tablet in download mode. From there you can start re-rooting and reflashing a custom recovery.
I know, it's a lot of lost time, but at least you'll be able to flash your custom ROM at end
Olivier V said:
Your best bet in my opinion, is reinstalling the stock firmware with Odin and your tablet in download mode. From there you can start re-rooting and reflashing a custom recovery.
I know, it's a lot of lost time, but at least you'll be able to flash your custom ROM at end
Click to expand...
Click to collapse
Thanks, DONE and Working again.
I installed Android 5.1.1 Lollipop from here but im my case very unstable many crashes, maybe i did something wrong.
Wifi does not work and the other side very often frozen images.
I would only to speed a littble bit up my TAB P7500
Thanks.
I have the same ROM installed on my tablet and WiFi is working fine here. However there are the Google play services that keep crashing when it automatically updates itself to the latest version. There's pretty much nothing you can do to stop it, except for uninstalling the Google play services and replacing it with the last version that worked, over and over again...
I don't remember what version that was exactly but it's mentioned in the same thread where you got the custom ROM from.
Unless Google decides to fix what it broke all the devices running an Nvidia tegra 2 SoC are left in the cold.
What I'm going to say now is probably not what you'll be wanting to hear, it's time to look for a new tablet