Hi, I have a unlocked unbranded S2,
About Phone:
Model Number: GT-I9100
Android Version: 4.0.4
Baseband Version: I9100XXLQ6
Kernel Version: 3.0.15-I9100XWLPT-CL941023 [email protected] #3 SMP PREEMPT Fri Jul 27 18:08:15 KST 2012
Build Number: IMM76D.XWLPT
Kies:
PDA:LPT / PHONE:LQ6 / CSC:LPA (XEU)
Kies says I have latest firmware. But if I wanted to manually update to JellyBean, which version do I use? The Nordic Countries?
Thank you very much.
Yes, LSD.
Sent from the Matrix
Beware of the DEA.
Sent from the little guy
u got 2 options. first is: wait until kies says there is an upgrade for your phone (would be lsd) or u flash lsd from this forum here manually.
Related
I have purchased a new SIII for my wife but it has a Vodafone-modified/branded ROM on it. I have been trying to figure out which ROM I should use to get a non-branded stock ROM on the SIII (like I did for my SII), but I get lost in the alphabet soup. Which stock ROM can I use here in Australia?
The phone currently report (when doing *#1234#):
AP: I9300TDUALE6
CP: I9300TDULE6
CSC: I9300TVAUALE6
"About Device" reports:
Model Number: GT-i9300T
Android version: 4.0.4
Baseband version: I9300TDULE6
Kernel version: 3.0.15-CL554509-user
[email protected]#1
SMP PREEMPT Sun May 13 11:52:35 KST 2012
Build number: IMM76D.I9300TDUALE6
neoculture23 said:
I have purchased a new SIII for my wife but it has a Vodafone-modified/branded ROM on it. I have been trying to figure out which ROM I should use to get a non-branded stock ROM on the SIII (like I did for my SII), but I get lost in the alphabet soup. Which stock ROM can I use here in Australia?
The phone currently report (when doing *#1234#):
AP: I9300TDUALE6
CP: I9300TDULE6
CSC: I9300TVAUALE6
"About Device" reports:
Model Number: GT-i9300T
Android version: 4.0.4
Baseband version: I9300TDULE6
Kernel version: 3.0.15-CL554509-user
[email protected]#1
SMP PREEMPT Sun May 13 11:52:35 KST 2012
Build number: IMM76D.I9300TDUALE6
Click to expand...
Click to collapse
omega rom is the best so far... make sure you root the phone first but..
rizky77 said:
omega rom is the best so far... make sure you root the phone first but..
Click to expand...
Click to collapse
I looked through samfirmware.com but could not see a ROM tagged as "Omega". Am I looking in the wrong place?
And I'm pretty certain I have rooted her phone already... well, I went though the motion and SU is installed... but the proof will be when I try to flash an entire ROM, of course.
You will find the Omega from here in our development section for the S3.
http://forum.xda-developers.com/forumdisplay.php?f=1566
Tapped That
Hey there,
After 2 years I've decided to root my SGS2, Ive been through flashing with nokia's and that kind of things. However, Im a total NOOB in android rooting.
My problem is the following:
I've updated my phone to ICS 4.0.4 (biggest mistake of my life).
Now I've searched everywhere to find a root manual for my Firmware-version, but I keep coming up with german sites (I'm Dutch).
Google translate does its work like a piece of sh**, so I've lost all of my faith.
After some crappy translating, I read something about a hard-brick of this firmware.
My question is: Wich version is safe to root on my phone?!
Info about my phone:
Carrier: T-mobile
Model: GT-I9100 (ofcourse)
Android version: 4.0.4
Baseband version: I9100BOLP7
Kernel version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Fri Aug 24 17:36:36 KST 2012
Build number: IMM76D.BOLPM
I hope my question isn't a dumb one, if so, I'm sorry!
soulcap said:
Hey there,
After 2 years I've decided to root my SGS2, Ive been through flashing with nokia's and that kind of things. However, Im a total NOOB in android rooting.
My problem is the following:
I've updated my phone to ICS 4.0.4 (biggest mistake of my life).
Now I've searched everywhere to find a root manual for my Firmware-version, but I keep coming up with german sites (I'm Dutch).
Google translate does its work like a piece of sh**, so I've lost all of my faith.
After some crappy translating, I read something about a hard-brick of this firmware.
My question is: Wich version is safe to root on my phone?!
Info about my phone:
Carrier: T-mobile
Model: GT-I9100 (ofcourse)
Android version: 4.0.4
Baseband version: I9100BOLP7
Kernel version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Fri Aug 24 17:36:36 KST 2012
I hope my question isn't a dumb one, if so, I'm sorry!
Click to expand...
Click to collapse
dwnld the .tar file of the latest siyah kernel and flash the same thro 'ODIN' to root ur phone
since custom kernels like siyah are safe without any brick bug
Sun90 said:
dwnld the .tar file of the latest siyah kernel and flash the same thro 'ODIN' to root ur phone
since custom kernels like siyah are safe without any brick bug
Click to expand...
Click to collapse
Allright! that's a quick awnser!
I'll look into it! Many thanks!
Im still not sure wich one I should use, the siyah version I've found is from May, is that a good version?
And how about this one: http://forum.xda-developers.com/showthread.php?t=1804619
I wanted to know If I could get this on my phone!
Thanks in advance!
soulcap said:
Im still not sure wich one I should use, the siyah version I've found is from May, is that a good version?
And how about this one: http://forum.xda-developers.com/showthread.php?t=1804619
I wanted to know If I could get this on my phone!
Thanks in advance!
Click to expand...
Click to collapse
check the link below for the latest Siyah kernel ma8
SiyahKernel S2-v4.1.5
and for that rom link u posted, Yes u can install the same after u have rooted ur phone successfully though
I too have this same problem. I have the following stats:
Carrier: AT&T
Model: GT-I9100
Android version: 4.0.4
PDA: I9100BULPG
Phone: I9100BULP8
CSC: I9100VODLPB
Baseband version: I9100BULP8
Kernel version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Thu Sep 13 10:45:25 KST 2012
Build number: IMM76D.BULPG
I want the Siyah kernel, but before I can flash that, I need root! Chainfire hasn't made the file that roots this specific firmware yet, so how do I root it?
Many Thanks
FirebirdStud said:
I too have this same problem. I have the following stats:
Carrier: AT&T
Model: GT-I9100
Android version: 4.0.4
PDA: I9100BULPG
Phone: I9100BULP8
CSC: I9100VODLPB
Baseband version: I9100BULP8
Kernel version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Thu Sep 13 10:45:25 KST 2012
Build number: IMM76D.BULPG
I want the Siyah kernel, but before I can flash that, I need root! Chainfire hasn't made the file that roots this specific firmware yet, so how do I root it?
Many Thanks
Click to expand...
Click to collapse
Flashing Siyah will also root your phone. Just make sure you use the correct version of Siyah for your model and version of Android.
You do not need to root your phone to flash Siyah kernel.
When you flash Siyah you will get root. Here's what you do:
#download siyah kernel
#Boot phone to download mode
#Open Odin and connect phone
#put siyah kernel .Tar file in PDA section of Odin.
#click start.
It is extremely difficult to brick your phone flashing a kernel in Odin.
Good luck
Sent from my GT-I9100 using xda app-developers app
Thanks! I used the PhilZ method before seeing this, and worked great!
Not a realy noob for android, but for a first time, I own S II I9100 and need it to root.
Spent reading forum 2 days about how to root device and even everything is perfectly explained, I'm still having issue.
Ok, to root, I need insecure kernel, right?
Tried to find my.............and nothing.
Phone is updated to 4.0.4, when I go to about phone tab, this is what I get from :
Model number: GT-I9100
Android version: 4.0.4
Baseband version: I9100XXLQ6
Kernel version: [email protected]#3
SMP PREEMPT Wed Aug 22 22:55.24 KST 2012
When I do *#1234#, this is what I get
PDA: I9100XWLPW
Phone: I9100XXLQ6
CSC: I9100DBTLPI
Would someone be, please, so kind and help me find out which kernel I need to find in order to root my phone !!!
Many Thanks guys.
menphisag said:
Not a realy noob for android, but for a first time, I own S II I9100 and need it to root.
Spent reading forum 2 days about how to root device and even everything is perfectly explained, I'm still having issue.
Ok, to root, I need insecure kernel, right?
Tried to find my.............and nothing.
Phone is updated to 4.0.4, when I go to about phone tab, this is what I get from :
Model number: GT-I9100
Android version: 4.0.4
Baseband version: I9100XXLQ6
Kernel version: [email protected]#3
SMP PREEMPT Wed Aug 22 22:55.24 KST 2012
When I do *#1234#, this is what I get
PDA: I9100XWLPW
Phone: I9100XXLQ6
CSC: I9100DBTLPI
Would someone be, please, so kind and help me find out which kernel I need to find in order to root my phone !!!
Many Thanks guys.
Click to expand...
Click to collapse
Hi,
Flash PhilZ-CWM6 kernel from here: http://www.mediafire.com/?k9j877v7k3z7sr8. Go to stock recovery (turn off the phone and press at the same time volume up + home + power) and use flash update zip option. Regards
Sent from my GT-I9100 using xda premium
hi, im new to this modding and flashing. I currently have a galaxy s2 locked on orange uk, i know i have an "insane" chip using eMMC app which says i can brick my s2 if i flash a kernel.
What do I do?
Android version 4.0.4
baseband: I9100XXLQ6
Kernel: 3.0.15 I9100XWLPT- CL941023 [email protected] #3 SMP PREEMPT fri jul 27 18:08:15 KST2012
build number: IMM76D.XWLPT
what do i need to do, should i use odin and cynamod?
mendespas said:
hi, im new to this modding and flashing. I currently have a galaxy s2 locked on orange uk, i know i have an "insane" chip using eMMC app which says i can brick my s2 if i flash a kernel.
What do I do?
Android version 4.0.4
baseband: I9100XXLQ6
Kernel: 3.0.15 I9100XWLPT- CL941023 [email protected] #3 SMP PREEMPT fri jul 27 18:08:15 KST2012
build number: IMM76D.XWLPT
what do i need to do, should i use odin and cynamod?
Click to expand...
Click to collapse
If you want to be 100% safe, don't screw with it, and just use your phone normally.
If you flash a safe kernel you'll avoid brick bug.........
mendespas said:
hi, im new to this modding and flashing. I currently have a galaxy s2 locked on orange uk, i know i have an "insane" chip using eMMC app which says i can brick my s2 if i flash a kernel.
What do I do?
Android version 4.0.4
baseband: I9100XXLQ6
Kernel: 3.0.15 I9100XWLPT- CL941023 [email protected] #3 SMP PREEMPT fri jul 27 18:08:15 KST2012
build number: IMM76D.XWLPT
what do i need to do, should i use odin and cynamod?
Click to expand...
Click to collapse
look into the siyah kernel. which is what most people used to root there 4.0.4. once you flashed the kernel and have clock work mod, flash a custom jb. be careful.
hello guys
i'm a new android addict recently i installed many apps that request root access but i observed that my phone ,Galaxy S2, is unstable. so i would flash it with out problems but there is 2 thing ( and hope they are the last things :victory: ) i want to know what is the correct firmware should i download to flash it???
in "about device" option in settings i found this:
Model number: GT-i9100
baseband version: I9100XXMS4
Kernel version: 3.0.31-1418025
[email protected]#3
SMP PREEMPT Wed Sep 25:18:29:28
KST 2013
and the build number : JZ054K.I9100XWMS1
1 quetion more: is there any phone break risks if i flash my phone by a compatible/incompatible rom???
thanx and sorry for my bad english