So was running an old version of PA 2.16 by Th3Bill and I kept having a problem where Apollo would crash. So I decided I was going to do a clean install of the newest version of PA 2.99 Final. Verify the MD5 and install with the guide on his page here: http://th3bill.com/?page_id=150
Making sure I have the proper CWM Recovery and Aroma Prep installed. At first it took the ROM, but it kept hanging a few seconds after boot and then rebooting infinitely. Tried doing a complete wipe and starting the process over. Now it CWM Recovery locks up and the screen glitches out during the ROM install at 40%. I tried the CM10 ROM it does the same thing. I tried to restore my backup of PA 2.16 and it took the files, but it just looped endlessly. Lastly I tried restoring a backup of a GB ROM and that booted and worked perfectly, but I'd prefer to get back on JB.
Anyone know what could be wrong and where I should start?
Related
SO I retartedly tried to restore from a nandroid after changing AOKP versions, and now even though I have wiped everything and done droidstyle's guide again, I install my THS Build 2 ICS ROM, and after I installed it, my phone just keeps booting into recovery, when I click "reboot system now" it just reboots into recovery. Any suggestions?
-------------------------------------------------------------------------------------------
Edit: After trying a couple other things, I decided to install AOKP Milestone 6, and then GApps, and voila, it booted :?
You should try THS build 1.
Hello, I'm having a bit of an issue here I can't install a ROM after trying CM10.1.
I was using CM10, up until awhile, when I deiced to give CM 10.1 a try (Alpha build I'm aware of the risks).
I have installed CM10.1 using Rom Manager Premium. The installation progress went smooth without any errors, before installing I've made a backup of my current ROM.
Once CM10.1 finished optimizing application it started giving errors, that it can't load up Setup Wizard stopped from working, I have rebooted into CMW, wiped Dalvik cache and user data, I have booted up again, and was still was getting the same error, so I decided to restore my previous ROM.
But when I have booted up into CWM, I have discovered that the backup I made isn't there, not on the Internal memory and not on the SD card.
The issue I'm having is that I can't instal CM10 back, when ever I try to install CM10 ROM ZIP using CMW from external SD I get an error (Status 7)
Is there any ODIN CM10 installation route?
Thank you!
Update 1:
I have manged to flash The Official Rom, But it can't boot up, it seems like it's stock on the animation screen, the animation moves, but doesn't boot up. What might be the issue?
Update 2:
Solved the problem by wiping use data, and resting it to factory settings.
Update 3:
Got it fixed, everything is running like it used to be. Shame that I lost all my personal DATA, specially the DICM folder :/
So I was able to successfully root my AT&T HTC One X and decided I wanted to install the CM 10 ROM (1st ROM install). I did all the data backups with Titanium, downloaded the latest zip files from cyanogenMod (both the 12/13 and 12/14 nightly versions), transferred them to my phone, booted into recovery (TWRP), did a back-up, did a system wipe, flashed the ROM and then did a reboot. However, when it boots it gets stuck in the boot-up screen (bootloop) and doesn't do anything. I have read on this and it keeps saying to wipe system data again and flash the ROM again and it keeps doing this. I want to install this ROM, but I need some help. Any suggestions on what I did wrong?
Do I need to manually flash the boot.img file or should I only need to transfer the zip to my phone and install after wiping/doing a factory reset?
Well, that didn't work either as the zip file failed completely during install. So I downloaded the latest "stable" version just for giggles and wiped everything again and did an install. Just like before, the install was successful and on reboot it locks up on the boot screen. I am at a loss on what to do.
Hey buddy, i had cm10 running on my HOX, when i did it i had to flash the boot img through fastboot as well.
I found a tutorial on youtube by cursed forever helpful, sorry I'd post a link but my thread counts not high enough yet
So up until today I was running this rom: http://forum.xda-developers.com/showthread.php?t=1912596
It was getting really buggy, so I decided to update to the latest CM10.1 nightly. I updated safestrap to the latest version, and I saw that on the changelog for the CM nightlies that the rom could be installed on any slot. For some reason, there was no rom slot 1, even though that's what I had the current rom installed on. I made a backup of the stock rom slot, wiped system/cache/factory reset, and installed CM 10.1 on the stock slot. That didn't boot up. So I tried to restore my backup. My backup of my current rom didn't show up, but the initial stock rom backup that I made when I first rooted the phone showed up, so i wiped everything again and tried to boot from that. On that, the boot animation showed up and went through, but it sat there for a few minutes without booting, so I did a hard reset and went back into recovery. I then made a romslot-1, wiped for precaution, then tried to install the cm nightly. The install went fine, but when I try to boot, the phone just vibrates initially like it's going to boot up, but there is no boot animation or anything on the screen, and it just sits there. Is there anything I can do to get this thing up and running again? I am not at the least opposed to returning it to stock, but I'm not sure if I need to restore to stock ICS or JB, since I'm pretty sure the rom I had running was using the ICS kernel. Here's the link to the rom I just tried to install: http://forum.xda-developers.com/showthread.php?p=39330661&highlight=boot#post39330661
Any help on the matter would be greatly appreciated.
I've been having a problem getting any 4.3 ROM to boot after the initial boot. I've seen a few other people with the same problem and I can't figure out a fix. Thought I'd ask the general Q&A.
I've used Beanstalk and Carbon (great ROMs) a few carbon 4.3 nightlies and Beanstalk 4.3.00. I installed their 4.3 builds (after checking sums to verify download) flash gapps, wipe cahce/dalvik and boot up. Set up goes great and rom runs great. but even without installing any other apps, using no backups or anything if I reboot it sticks on samsung screen and can't get past it. Every time, I even rebooted without finishing setup and wouldnt advance past samsung.
I even flashed 4.3 rom and gapps, let it reinstall apps from market then booted to recovery and made a backup. Then could'nt reboot. But if I wipe and restore the backup it will boot fine the 1 time, but again any attempts to reboot stick on samsung screen. Wiping cache/dalvik from recovery does not help, fix permissions from recovery does not help.
Anybody have this problem and find a fix?
Ok, I tried slim bean beta 2, no luck, tried ktoons kernel, no luck. Guess I'm staying with 4.2.2 until there is some movement on this issue.