Hi guys, i bricked my phone when i tried to relock bootloader with flashtool(BLRelock). Now my phone don`t start(led don`t blink, phone don`t vibrate). What should i do? Need help.
adyfabregas04 said:
Hi guys, i bricked my phone when i tried to relock bootloader with flashtool(BLRelock). Now my phone don`t start(led don`t blink, phone don`t vibrate). What should i do? Need help.
Click to expand...
Click to collapse
just flash a kernel with flashtool
You got a hardbrick, never relock bootloader on custom kernel.
I can`t flash a kernel `cause my phone don`t start. And I don`t know what to do...
Your battery is charged??
IF NOT HARD BRICK. if have warranty go to sony center or tell a lie about your phone, your phone reset and dont turn on again something similar xd. If dont have warranty the fix is via JTAG and you need to pay for it.
adyfabregas04 said:
I can`t flash a kernel `cause my phone don`t start. And I don`t know what to do...
Click to expand...
Click to collapse
you can flash a kernel even if it can't boot by pressing back button while connecting usb cable...
isko95 said:
you can flash a kernel even if it can't boot by pressing back button while connecting usb cable...
Click to expand...
Click to collapse
I cant do this cause my phone dont start up . I tried the trick with battery removed... remove batery, pres back button, connect batery and pres power button, but dont start . Its dead
adyfabregas04 said:
I cant do this cause my phone dont start up . I tried the trick with battery removed... remove batery, pres back button, connect batery and pres power button, but dont start . Its dead
Click to expand...
Click to collapse
Did u try what i said?
isko95 said:
Did u try what i said?
Click to expand...
Click to collapse
Yes, i tried but phone dont start up and pc dont recognize it.
adyfabregas04 said:
Yes, i tried but phone dont start up and pc dont recognize it.
Click to expand...
Click to collapse
I think you can't understand what i'm saying..
isko95 said:
I think you can't understand what i'm saying..
Click to expand...
Click to collapse
yes, i misunderstand. how can i do it?
Look what i did:
My phone goes to vodafone service and they locked my phone on vodafone, I tooke the phone to a service gsm to unlock it. When i take it, i tried to flash a costum kernel: nAa 14, i used s1tool and shows me "UNKNOWN SIM CERTIFICATE" or sm like that so I can`t unlock bootloader, but i read somewhere to use "stool2" and i used it now i tried to flash nAa kernel, i did it and i installed gingersony but phone loop on nAa kernel . Then...i flash BLRelock...after flash finished, phone died. Dont start up, green led dont blink, phone dont vibrate and flashtool,pcc dont recognize it.
sorry for bad english
isko95 said:
you can flash a kernel even if it can't boot by pressing back button while connecting usb cable...
Click to expand...
Click to collapse
That would have worked if the phone wasn't bootloader-bricked. Installing the blrelock.ftf-bootloader on the xperia mini pro will make it unbootable. No back-arrow-flash-option, no hack, no way, no how. The phone is properly bricked.
Only way to un-brick is JTAG. Please do not try to "help" people if you do not know how f'ed up their problem is.
isko95 said:
you can flash a kernel even if it can't boot by pressing back button while connecting usb cable...
Click to expand...
Click to collapse
hardbricked is where the device can't be detected (changing, flash mode, boot, etc.. all is useless)
the only solution is j-tag..
got the same problem & my x10 mini pro RIP..
---------- Post added at 11:01 AM ---------- Previous post was at 10:57 AM ----------
Verbato said:
That would have worked if the phone wasn't bootloader-bricked. Installing the blrelock.ftf-bootloader on the xperia mini pro will make it unbootable. No back-arrow-flash-option, no hack, no way, no how. The phone is properly bricked.
Only way to un-brick is JTAG. Please do not try to "help" people if you do not know how f'ed up their problem is.
Click to expand...
Click to collapse
Agreed. JTAG is the only option left..
:good:
I can use JTAG at work (we have lauterbach trace32) but I can not find any pinout diagram or procedure. Can sameone help me? Thank you very much.
Please Help !
isko95 said:
you can flash a kernel even if it can't boot by pressing back button while connecting usb cable...
Click to expand...
Click to collapse
Dear Sir,
When we select the Firmware in Flash Tool ( Flash Mode ) then we got the message to unplug the device-Then to press the back button-Then to connect the Usb to phone, But as with this Hard Bricked situation nothing happens on the phone and the same message remain on the screen.
Usually after follwoing such process we can easily flash any kernel/Firmware but due to Hard Brick we cannot.
I would really appreciate if you suggest how to flash kernel when phone is not showing any life and not connecting to the PC or communicating with the Flash Tool ( As message flash that Device Not Connected on Flash Tool )
Please Help !!
Related
Don't boot... I was doing some changes with Generic 2.0.2.A.0.24 firmware [rooted + xrecovery preinstalled], and then... poof!
Now i can't repair with seus update, the phone don't boot!
Do you have any suggestion?
Thank You...
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
have u tried pressing home and back and on/off button together?
or taking out the battery cable and putting it back in?
I bricked mine earlier, just used Binary's flash tool to reflash 2.1
Skeldave said:
I bricked mine earlier, just used Binary's flash tool to reflash 2.1
Click to expand...
Click to collapse
My phone can't boot, and so i can't start adb or similar...
world2010 said:
or taking out the battery cable and putting it back in?
Click to expand...
Click to collapse
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
world2010 said:
have u tried pressing home and back and on/off button together?
Click to expand...
Click to collapse
Yes, but nothing...
Thank you,
dettofatto
tried updating with seus?? and if u didnt succeed use binary flash tool non gui version and download any 2.1 firmware
shivenjuneja said:
tried updating with seus?? and if u didnt succeed use binary flash tool non gui version and download any 2.1 firmware
Click to expand...
Click to collapse
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
dettofatto said:
My phone can't boot, and so i can't start adb or similar...
Click to expand...
Click to collapse
For future reference: You dont need to have your phone "on" to use the flash tool, it just has to be in the update mode. (Hold back button while plugging into the usb). This is for if you ever brick it again
Skeldave said:
For future reference: You dont need to have your phone "on" to use the flash tool, it just has to be in the update mode. (Hold back button while plugging into the usb). This is for if you ever brick it again
Click to expand...
Click to collapse
my phone didn't go in the update mode...
Where is the battery cable?
Sent from my E10i
dettofatto said:
Don't boot... I was doing some changes with Generic 2.0.2.A.0.24 firmware [rooted + xrecovery preinstalled], and then... poof!
Now i can't repair with seus update, the phone don't boot!
Do you have any suggestion?
Thank You...
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
Click to expand...
Click to collapse
sound like you may have cause the hardware some physical damage, i recomend taking it to se so the can have a look see... also have you tried update mode with battry out (as in hold back button, pc cable plugged in and battery out of phone)? also try out another battery..
Karadenizli said:
Where is the battery cable?
Sent from my E10i
Click to expand...
Click to collapse
http://www.ifixit.com/Teardown/Sony-Ericsson-Xperia-X10-Mini-E10i-Teardown/3124/1
Had the same problem
I had the same problem I took phone apart very carefully unplugged the battery cable and left it for +- 10 minutes plugged battery cable back in assembled the phone I used bin4ry console flash tool I just held down only the back button plugged usb cable in flashtool found x10i mini started flash, Don't turn on phone or anything else after re-connecting the battery just the back button and usb, green led should lite up.I don't know if this help's you must have patience after the flash it takes a while leave the phone for +- 5 minutes after flash run adb shell in console if phone seems not to respond try few times once you get shell your phone should be back to normal just be patient it all takes a while.
stuck in boot loop
Gothic-4-Schiffer said:
sound like you may have cause the hardware some physical damage, i recomend taking it to se so the can have a look see... also have you tried update mode with battry out (as in hold back button, pc cable plugged in and battery out of phone)? also try out another battery..
Click to expand...
Click to collapse
Hi,
would it be possible to cause the phone some physical damage while flashing that would've caused the phone to be stuck in the boot loop? because I'm in the asme predicament on my mini pro. thanks
please help me..i'm stuck w/ the white sony ericsson boot logo just after i restored w/ xrecovery..im using a x10 mini pro although i can still access xrecovery..thanks in advance..
take out your sdcard use an external sd card reader and copy a new image like CM6 3.4 on it. now boot into xrecovery.
factory reset
full wipe
clear dalvik cache
install cm6 3.4
reboot
thank you so much slade87..you have saved my fone and my life for w/ your grate help..thank you very much! ^__________^
No prblem i am glad it worked :-D
Sent from my X10minipro using XDA Premium App
i'm stuck w/ the white sony ericsson boot logo just after i try for ugrade to miniCM w/ xrecovery..im using a x10 mini pro although i can't still access xrecovery...
i try for flash.. but still stuck w/ sony ericsson logo.
try for press "menu button and power button it nothing happen...
what can i do for get back my x10 mini pro normal again..
sorry if my english is bad...
ableh.X10black said:
i'm stuck w/ the white sony ericsson boot logo just after i try for ugrade to miniCM w/ xrecovery..im using a x10 mini pro although i can't still access xrecovery...
i try for flash.. but still stuck w/ sony ericsson logo.
try for press "menu button and power button it nothing happen...
what can i do for get back my x10 mini pro normal again..
sorry if my english is bad...
Click to expand...
Click to collapse
Download SE PC companion and install it:
http://www.sonyericsson.com/cws/supp...10?cc=gb&lc=en
Open Sony Ericsson PC Companion when it´s installed:
Choose Support Zone(Start/Begin)->updating the phone software: it will pop up a message phone not found. Search for blue marked: Repair phone. Click on it and follow instructions on how to do.
If you still dont get it, check:
http://www.youtube.com/watch?v=i6CMm...eature=related
I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
XTacDK said:
I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
Click to expand...
Click to collapse
restore your phone via SEUS from pc companion it will revert your kernel to stock and install the stock rom
Don't worry, I did the same thing the first time I tried to install Zombie Panic. Download the Sony Ercisson Update Service from here, insatll it on your PC and follow the instructions to install (even if it says you have the latest version). It'll take you back to Stock ROM and your phone will boot.
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
XTacDK said:
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
Click to expand...
Click to collapse
you should start the update process while the phone is disconnected and press repair then when asked connect the phone while you are pressing the back key to connect via flash mode.
Wait.. but i choose the reprair phone option and now it trying to reprair it, i just believe, at this will save my phone
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
XTacDK said:
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
Click to expand...
Click to collapse
for mini you can't take the battery out
just turn off the phone for 5 seconds press the back key and connect the phone to the pc it should the start the repair via flash mode
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
XTacDK said:
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
Click to expand...
Click to collapse
mmm try to flash a stock kernel from the forum on this link via flashtool
http://forum.xda-developers.com/showthread.php?t=1254225
and then update via SEUS it should work...
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
XTacDK said:
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
Click to expand...
Click to collapse
well the only way to remove the battery of x10 mini is to disassemble it so send it for repair is better.
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
well man this is not the worst! i have now while talking to you the worst brick! i crashed my bootloader and i can't even flash my stock kernel!
i cant do this too,,, But i think if i restart the phone, so i see kernel nAa 6 logo and i will install mCM7! I must be optimist, cause i want to cry now ;D
XTacDK said:
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
Click to expand...
Click to collapse
Prepare SEUS on repair mode, until message to connect phone.
Press and hold power button, then press home button (don't release power button) and wait phone off. press and hold back button then connect the usb cable.
thank you!!!!you saved my phone~! Now can install mCM7.... thank you!!!
I was tryin to install MiniCM7 and during my noobish attempt I pretty much deleted everything on my phone. Factory reset and such. And I attempted to fix by rebooting the phone but now all I get is the Sony Ericsson Logo and when I try to turn the damned thing off it turns back on. I tried SEUS but even after quickly hitting back and plugin the usb cable after Home+Back+Power no dice. Can anybody out there help this desperate noob soul :c
Cant you pull out the battery connector underneath the rubber bit next to the camera to turn it off??
Sent from my U20i using xda premium
Battery Disconnected What now?
I have a big problem installed the rom real ics beta 3 with the stock kernel and tlm entered the boot loop then thought it was a bug and installed the rom real ics beta 2 but keep the same and now in recovery not say that I can not mount the sd card i need help the phone is new.
Sorry for bad english.
upppp said:
I have a big problem installed the rom real ics beta 3 with the stock kernel and tlm entered the boot loop then thought it was a bug and installed the rom real ics beta 2 but keep the same and now in recovery not say that I can not mount the sd card i need help the phone is new.
Sorry for bad english.
Click to expand...
Click to collapse
read this thread..http://forum.xda-developers.com/showthread.php?t=1568792
it has step by step process to solve ur problem
upppp said:
I have a big problem installed the rom real ics beta 3 with the stock kernel and tlm entered the boot loop then thought it was a bug and installed the rom real ics beta 2 but keep the same and now in recovery not say that I can not mount the sd card i need help the phone is new.
Sorry for bad english.
Click to expand...
Click to collapse
Flash the stock rom with flashtool, for that look in the rooting guide in my signature. There's how to root your phone on 4.0.2.A.0.62 firmware and there's how to use flashtool and install the firmware.
Is your bootloader locked?
Didn't you make a backup?
mihahn said:
Flash the stock rom with flashtool, for that look in the rooting guide in my signature. There's how to root your phone on 4.0.2.A.0.62 firmware and there's how to use flashtool and install the firmware.
Is your bootloader locked?
Didn't you make a backup?
Click to expand...
Click to collapse
yes my bootloarder is locked , i dont make a backup
read this thread..http://forum.xda-developers.com/show....php?t=1568792
it has step by step process to solve ur problem
im trying but i dont cant enter in flashmode
upppp said:
yes my bootloarder is locked , i dont make a backup
read this thread..http://forum.xda-developers.com/show....php?t=1568792
it has step by step process to solve ur problem
im trying but i dont cant enter in flashmode
Click to expand...
Click to collapse
to enter flash mode proper drivers should be installed in ur pc.....
install sony update service in ur pc...it will automatically install s1 flashboot and fastboot drivers.
sandy7 said:
to enter flash mode proper drivers should be installed in ur pc.....
install sony update service in ur pc...it will automatically install s1 flashboot and fastboot drivers.
Click to expand...
Click to collapse
i install sony update but the phone not enter in flashmode , volume down i just reboot reboot reboot .....
upppp said:
i install sony update but the phone not enter in flashmode , volume down i just reboot reboot reboot .....
Click to expand...
Click to collapse
I'm from Portugal and here we have 15 days in which we can return the phone if it has a problem since we can not in any way give life to this mobile phone I think it best to go the store going to say that he died when he did the upgrade ics system. It is a good idea or should I seek a solution , i have the phone for 1 week
upppp said:
i install sony update but the phone not enter in flashmode , volume down i just reboot reboot reboot .....
Click to expand...
Click to collapse
Turn phone off, remove battery, wait 5s, put battery, hold volume down and plug cable. Keep holding until led comes green.
pikpok said:
Turn phone off, remove battery, wait 5s, put battery, hold volume down and plug cable. Keep holding until led comes green.
Click to expand...
Click to collapse
led only red dont get green one time pc companion recognise sony ericsson xperia mini , e ear the sound of usb i think its close to enter in flashmode
upppp said:
I have a big problem installed the rom real ics beta 3 with the stock kernel and tlm entered the boot loop then thought it was a bug and installed the rom real ics beta 2 but keep the same and now in recovery not say that I can not mount the sd card i need help the phone is new.
Sorry for bad english.
Click to expand...
Click to collapse
See here http://forum.xda-developers.com/showthread.php?t=1799786
Did you install the drivers from flashtool now?
Install flashtool, go to the installation folder>drivers and install the .exe (maybe your phone isn't included in the list, just tick everything which is offered and install all them).
Afterwards install sony pc companion and sony update service, drivers should be installed with it.
So turn phone off and while it's off hold volume down and while you hold it down connect the usb to pc. The led should turn green.
If it's red it could be battery isn't charged, so charge it. If charging doesn't work get a battery of a friend...
Well bro, proceed is said by mihahn, the led is red, just bcz you have installed extended stock Kernel, right???
Sent from my ST15i using xda app-developers app
Sent from my ST15i using xda app-developers app
i tried everything but the phone dont enter in flashmode ............ red led vibrate and reboot..... red led vibrate reboot......................................
upppp said:
i tried everything but the phone dont enter in flashmode ............ red led vibrate and reboot..... red led vibrate reboot......................................
Click to expand...
Click to collapse
That it vibrates is strange, normally you just hold volume down and connect. Don't power on or anything just press volume down and plug usb...
But if that's not the problem I haven't found something that may help you, yet
mihahn said:
That it vibrates is strange, normally you just hold volume down and connect. Don't power on or anything just press volume down and plug usb...
But if that's not the problem I haven't found something that may help you, yet
Click to expand...
Click to collapse
OMG im so noob i am doing it with power on omg ty now the phone is live ty
upppp said:
OMG im so noob i am doing it with power on omg ty now the phone is live ty
Click to expand...
Click to collapse
Very great enjoy your phone again
Hit thanks if I helped
HI GUYS
I need help my xperia sola wont turn on or go into flashmode or fastboot mode it just has a red light on when i connect it and when i press the power button the LED light blinks orange
I have tried pressing all the buttons at once... doesnt work :crying:
PLEASE HELP ME PPL i need to get rid of this problem
Your Battery is empty
When the led blinks red or orange he says your battery is empty use the originalcable from Sony
________________________________________________________________
Xperia U - Clean ICS v1.1
Maybe your battery is empty?
If not, what did you do before? Flashing anything? Rooted/unlocked bootloader/rom? Please give us more information
Sent from my Nexus 7 running Android 4.2.1
I have a similar problem with my Xperia U. I only got to unlock the BL yesterday (the official way). Then I put in a boot.img from FXP CM10 ROM for... Xperia T using fastboot and it stopped responding entirely. I give, that wasn't particularly clever, but it's the first time I use FXP and the instructions did say I should use CM10 boot image and that's what I did as there is no Xperia U CM10 image.
I charged the phone for 2 hours from my PC using the original Sony cable and then overnight (for ~8 hours) using a charger from my aged Spica. Pressing and holding the Power button after charging produced no effect whatsoever. Not even a blink of a diode.
I removed the battery and replaced it after ~20 minutes. The Power button still does nothing.
Plugging in the charger lights up the red charge LED, but the screen is off.
Plugging the phone to the PC (original Sony cable, dual Windows Vista 32-bit/Debian Sqeeze 64-bit laptop) also only lights up the red charge LED, the screen is still off. Holding Vol+/Vol- buttons (or both) while plugging in the USB cable does nothing.
Because I can neither fastboot nor flashmode I couldn't use Flashtool or SUS.
I'm lost... What did I miss?
First there is no CM for U, and second you bricked device cause you flashed wrong kernel - its for another phone.
You might flash U kernel from CM9.
Now try charging the phone for hours, then try enter flashmode to flash stock ROM, or fastboot mode to flash proper kernel.
mirost1 said:
First there is no CM for U, and second you bricked device cause you flashed wrong kernel - its for another phone.
You might flash U kernel from CM9.
Now try charging the phone for hours, then try enter flashmode to flash stock ROM, or fastboot mode to flash proper kernel.
Click to expand...
Click to collapse
FXP for U is a modified CM9, right? That's what I was talking about.
I'm very well aware that's a wrong kernel I just didn't realise that until it was too late because of the cryptic device coding. I use Linux for 10 years now and it's not my first Android device so I have an idea how this things work.
I already did that. Is there anything else I might try or should I just repeat the charging process ad infinitum?
Once I too flashed a wrong kernel
Xperia p kernel on xperia u
Bt both are novathor brothers
So I still had flashmode
Xperia t is no where related to xperia u
Its a qualcomm
And unfortunately u have a hard brick my friend
U will require a SEtool to make ur phone living again
And its not available everywhere
That tool will help u to write ur bootloader again(i read it somewhere)
The only good thing is that there is no hardware damage
All u need is to get it working again
Google Jtag and SEtool
Read and it will help u
More info
mihahn said:
Maybe your battery is empty?
If not, what did you do before? Flashing anything? Rooted/unlocked bootloader/rom? Please give us more information
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
I unlocked the bootloader and flash a wrong rom by mistake and now i cant even enter fastboot mode :crying:
abdurrahman10 said:
I unlocked the bootloader and flash a wrong rom by mistake and now i cant even enter fastboot mode :crying:
Click to expand...
Click to collapse
What about flash mode so you can flash stock rom?
What do i do using se tool
drsanket_xperia_u said:
Once I too flashed a wrong kernel
Xperia p kernel on xperia u
Bt both are novathor brothers
So I still had flashmode
Xperia t is no where related to xperia u
Its a qualcomm
And unfortunately u have a hard brick my friend
U will require a SEtool to make ur phone living again
And its not available everywhere
That tool will help u to write ur bootloader again(i read it somewhere)
The only good thing is that there is no hardware damage
All u need is to get it working again
Google Jtag and SEtool
Read and it will help u
Click to expand...
Click to collapse
What do i do using SEtool ?? Can i have a detailed explanation
abdurrahman10 said:
What do i do using SEtool ?? Can i have a detailed explanation
Click to expand...
Click to collapse
That's a hint for me. Sorry for thread hijacking.
Thanks for the tip. This really makes me a sad panda. I hope I can fix this myself. I installed dozens of ROMs on my previous phone, but this new one must be jinxed...
Nope
mirost1 said:
What about flash mode so you can flash stock rom?
Click to expand...
Click to collapse
No cant even enter flash mode
ARH
NEED HELP
Try IT
Hold VolumeUP + Power Button for 6,7 seconds it will vibrate, If it vibrate 3 times during that seconds
then May be u can enter to flashmode or fastboot mode..
Try it mate )
Sorry to post this here but after two days searching, I don't know what to do. Three days back my xu was very weird, rebooting and didn't recognize the sim card. After that I try to flash a stock untouched rom and kernel... and now it doesn't boot, charge and connect to flashmode. I searched in google and xda for answers and tried some methods to bring it back to life, but nothing works. Help me please u.u, maybe there's something I've missing
blackkzero said:
Sorry to post this here but after two days searching, I don't know what to do. Three days back my xu was very weird, rebooting and didn't recognize the sim card. After that I try to flash a stock untouched rom and kernel... and now it doesn't boot, charge and connect to flashmode. I searched in google and xda for answers and tried some methods to bring it back to life, but nothing works. Help me please u.u, maybe there's something I've missing
Click to expand...
Click to collapse
repair your phone using Sony PCC.
Ben Ling said:
repair your phone using Sony PCC.
Click to expand...
Click to collapse
If you have unlocked bootloader @blackkzero lock it again and then try Sony PCC.
that's the worst part of this, sony pcc don't recognize it and it has locked bootloader
blackkzero said:
that's the worst part of this, sony pcc don't recognize it and it has locked bootloader
Click to expand...
Click to collapse
Try with seus. Maybe works this one.
Did you try to flash a custom kernel too to see if boots? Maybe from miui since there is a version for locked bootloader too.
DaRk-L0rD said:
Try with seus. Maybe works this one.
Did you try to flash a custom kernel too to see if boots? Maybe from miui since there is a version for locked bootloader too.
Click to expand...
Click to collapse
seus don't recognize it, and I can't flash customs kernels, only stock based (lb). I let it charge all the night, without response
blackkzero said:
seus don't recognize it, and I can't flash customs kernels, only stock based (lb). I let it charge all the night, without response
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showpost.php?p=40654231&postcount=638. Extract the boot.img and flash it. Maybe could work.Works for lb too.
DaRk-L0rD said:
try this http://forum.xda-developers.com/showpost.php?p=40654231&postcount=638. Extract the boot.img and flash it. Maybe could work.Works for lb too.
Click to expand...
Click to collapse
sorry for my delay in response. I think I cannot flash a boot.img because I'm in locked bootloader (right?, how?). I managed to charge a bit the battery but when I try to boot up a green led of the led bar turns on, it looks like it is stuck in flashmode :S. Maybe I've lost my device forever :/
blackkzero said:
sorry for my delay in response. I think I cannot flash a boot.img because I'm in locked bootloader (right?, how?). I managed to charge a bit the battery but when I try to boot up a green led of the led bar turns on, it looks like it is stuck in flashmode :S. Maybe I've lost my device forever :/
Click to expand...
Click to collapse
Why don't you try to unlock bootloader?
Did u try using the flash tool..?? download the stock fft for ur device and try flash using the flash tool. Since u have a locked bootloader u should not flash custom kernels. only stock kernels could be flashed else u will brick ur soft device.
DaRk-L0rD said:
Why don't you try to unlock bootloader?
Click to expand...
Click to collapse
I've tried before, bootloader locked status says no :/
Joker. said:
Did u try using the flash tool..?? download the stock fft for ur device and try flash using the flash tool. Since u have a locked bootloader u should not flash custom kernels. only stock kernels could be flashed else u will brick ur soft device.
Click to expand...
Click to collapse
yes, but when I try to boot up it doesn't, keeps stucked in flashmode
When i was locked bootloader it happens more or less the same:
Out batery for 5min+-
Then you put in batery
You pluged in charger if will so a red light.
Trie to power on you will see green ligth this is a proces unpluged it..
Here we have to divide:
If ypu have linux conect with flashmode mode and type in terminal usblist it show you a list of plugged devices in your computer take the line of sony erison and compare with the rules you have before mayne the code have change.
In windows i dont know hoq to do it...
Open flashtool preparate the ftf and plugged your mobile phone pres volume - until it start to flashing it forces not to go out from flashmode
Tell what happen
enviado desde spica( mononucleo 600mhz gingenbrad 5años)
blackkzero said:
sorry for my delay in response. I think I cannot flash a boot.img because I'm in locked bootloader (right?, how?). I managed to charge a bit the battery but when I try to boot up a green led of the led bar turns on, it looks like it is stuck in flashmode :S. Maybe I've lost my device forever :/
Click to expand...
Click to collapse
that hapened to me when i've flashed custom kernel on locked bootloader.....my device didn't get boot so i took out my battery & waited for 10-15 sec & allowed xperia u to discharge completely by draining ststic charge left, this can be done by pressing power button..without inserting the battery....
after that i directly booted into fastboot mode & flashed stock ftf....hurray..!
note: this trick won't work if ur battery is completely discharged....so for that use any universal charger..& charge it & the do the above process....
also if u have locked bootloader..there are less chances of getting hard bricked....!
regards
kantry123
thanks for your answers, I will try the two methods described above. If they not work I think it's time to say good bye to my old friend. I'll feedback later :')
werty100 said:
When i was locked bootloader it happens more or less the same:
Out batery for 5min+-
Then you put in batery
You pluged in charger if will so a red light.
Trie to power on you will see green ligth this is a proces unpluged it..
Here we have to divide:
If ypu have linux conect with flashmode mode and type in terminal usblist it show you a list of plugged devices in your computer take the line of sony erison and compare with the rules you have before mayne the code have change.
In windows i dont know hoq to do it...
Open flashtool preparate the ftf and plugged your mobile phone pres volume - until it start to flashing it forces not to go out from flashmode
Tell what happen
enviado desde spica( mononucleo 600mhz gingenbrad 5años)
Click to expand...
Click to collapse
I managed to flash a rom/kernel, but still happens the same
kantry123 said:
that hapened to me when i've flashed custom kernel on locked bootloader.....my device didn't get boot so i took out my battery & waited for 10-15 sec & allowed xperia u to discharge completely by draining ststic charge left, this can be done by pressing power button..without inserting the battery....
after that i directly booted into fastboot mode & flashed stock ftf....hurray..!
note: this trick won't work if ur battery is completely discharged....so for that use any universal charger..& charge it & the do the above process....
also if u have locked bootloader..there are less chances of getting hard bricked....!
regards
kantry123
Click to expand...
Click to collapse
keeps stucked in flashmode, it can't boot anymore. I don't what to do :/. I'll keep it stored as a souvenir u.u. Thanks all for your time
blackkzero said:
sorry for my delay in response. I think I cannot flash a boot.img because I'm in locked bootloader (right?, how?). I managed to charge a bit the battery but when I try to boot up a green led of the led bar turns on, it looks like it is stuck in flashmode :S. Maybe I've lost my device forever :/
Click to expand...
Click to collapse
Here is what to do
Ur device can bring led will booting
And you can charge your phone
So here is what to do
Charge ur phone about 1 hour
Make sure their is enough battery
Now try unlocking ur device bootloader
Don't use flash tool to unlock
Make sure you done it right
Then flash a custom kernel
If it opens go to recovery and do factory reset
Or
Flash recovery for stock ics locked bootloader
Boot and flash an ics stock based Rom
For LOcked bootloader
Do a factory reset
And done
Hope this help
If I did not work
Pm me I will try to solve this problem
Don't worry this is a softbreak
So. It is due to device fw/software
Problem so it can be fixed here on xda
Sent From My Xsola Running Ultimate Ex Rom
Mtakween said:
Here is what to do
Ur device can bring led will booting
And you can charge your phone
So here is what to do
Charge ur phone about 1 hour
Make sure their is enough battery
Now try unlocking ur device bootloader
Don't use flash tool to unlock
Make sure you done it right
Then flash a custom kernel
If it opens go to recovery and do factory reset
Or
Flash recovery for stock ics locked bootloader
Boot and flash an ics stock based Rom
For LOcked bootloader
Do a factory reset
And done
Hope this help
If I did not work
Pm me I will try to solve this problem
Don't worry this is a softbreak
So. It is due to device fw/software
Problem so it can be fixed here on xda
Sent From My Xsola Running Ultimate Ex Rom
Click to expand...
Click to collapse
many thanks, I'll post feedback soon
EDIT: @Mtakween, I can't charge my device, when I plug the wall charger or pc usb (not universal charger) it boots (no sony logo) but like it is connected to flashmode or sometimes the red notification led turns on. I will try to charge the original battery with another method, because I was using a small battery but doesn't fit. For all of this and my locked bootloader, I can't do what you say (flash a custom kernel) or you mean I should try it anyway?. Thanks for your time
@Mtakween I can't unlock the bootloader (bootloader unlock status: no) so I can't connect to fastboot, don't matter what I do. I can still flash stock kernels/roms successfully, but the phone doesn't boot, keeping always with the same behavior: red led notification/green led bar (flashmode) when is connected to charger :/
after try all I can and leave it in the technical service, my device is totally dead. I want to say thanks to all devs and users. For now, I'm out of the android world. Good bye friends
Thread closed by request of the OP.
To bad his phone is dead