Help! My Galaxy S2 isn't working anymore! I decided to replace stock recovery with Clockworkmod recovery 6.0.2.7. The process went well but on the reboot there was a yellow triangle and then it doesn't do anything. I'm able to go into the Clockworkmod recovery though. What do I do to go back into booting my phone normally? I was running the leaked version of jelly bean (4.1.2) on the international version of the Galaxy S2. Please help!!
Whenever I try to boot up normally the Galaxy S2 logo will pop up, followed by the sound of the phone booting up (Samsung sound) but no display. Seriously, what can I do to fix this as I am really worried. I've heard that my phone isn't bricked because I can access recovery but please, what do I have to do to make my phone accessible again?
Relax, and flash stock rom.
Sent from the little guy
gastonw said:
Relax, and flash stock rom.
Sent from the little guy
Click to expand...
Click to collapse
Okay, can you please give me a guide as to how to do this. I really don't want to get this wrong. If you give me a step by step guide and link me the ICS rom (so that I can update my phone using kies when Jelly bean arrives in UK) I will thank you will all my heart
Remember how you got to lsj......?
Sent from the little guy
gastonw said:
Remember how you got to lsj......?
Sent from the little guy
Click to expand...
Click to collapse
If you're referring to the version of jelly bean I got, yes. However, I want ICS and I am confused at the minute on how to get back to stock. In Clockworkmod recovery I did a backup to my internal SD card and then did a wipe of data and of my cache. Could you give me the perfect stock rom thing to get back to ICS, as if it was out of the box?
gastonw said:
Remember how you got to lsj......?
Sent from the little guy
Click to expand...
Click to collapse
How bad a situation am I in? Is my phone bricked? When I flash a stock rom will I still have CWM or will it be gone?
Also, can you tell me, if you know, what I did wrong in the first place? This seemed like a simple procedure...
Wait, let me read the OP again.
And don't bump the thread, edit like I'm about to.
Here's a thougt, why not focus on get your device up and runing insted of trying to get ICS?
1) wipe dalvik & factory reset your device (recovery)
2) didn't work? flash lsd or ls8 (single tar file in pda) in odin.
3) should be up and running, search for an ICS ROMs thread and flash ICS.
what happened? maybe a bootloop.
Sent from the little guy
gastonw said:
Wait, let me read the OP again.
And don't bump the thread, edit like I'm about to.
Here's a thougt, why not focus on get your device up and runing insted of trying to get ICS?
1) wipe dalvik & factory reset your device (recovery)
2) didn't work? flash lsd or ls8 (single tar file in pda) in odin.
3) should be up and running, search for an ICS ROMs thread and flash ICS.
what happened? maybe a bootloop.
Sent from the little guy
Click to expand...
Click to collapse
Sorry, I'm confused. What does lsd or ls8 mean?
Oh, here's the link where I got the CWM from: http://forum.xda-developers.com/showthread.php?t=1118693
Maybe this will help.
EdScrut said:
Sorry, I'm confused. What does lsd or ls8 mean?
Click to expand...
Click to collapse
Compilation names, ls8 was released on FOP (spain unbranded), lsd came out 10 days after for nordic countries and italy.
Check Sammobile.com or search for "i9100 sammobile starts rolling jelly bean"
Sent from the little guy
gastonw said:
Compilation names, ls8 was released on FOP (spain unbranded), lsd came out 10 days after for nordic countries and italy.
Check Sammobile.com or search for "i9100 sammobile starts rolling jelly bean"
Sent from the little guy
Click to expand...
Click to collapse
Cheers mate! Think I've sorted it! Gonna flash lsd tomorrow after the dentist Not going anywhere near clockworkmod recovery again!
I'll come back here if I have any issues. Hopefully I won't, I've flashed lsj before successfully! Thanks alot!
Btw, would you recommend lsd or ls8? Are there any differences. I know that lsj did not have pop out video player but had pretty much everything else that's available for 4.1 jelly bean.
EdScrut said:
Cheers mate! Think I've sorted it! Gonna flash lsd tomorrow after the dentist Not going anywhere near clockworkmod recovery again!
I'll come back here if I have any issues. Hopefully I won't, I've flashed lsj before successfully! Thanks alot!
Btw, would you recommend lsd or ls8? Are there any differences. I know that lsj did not have pop out video player but had pretty much everything else that's available for 4.1 jelly bean.
Click to expand...
Click to collapse
Nordic LSD and it's always good to have CMW installed.
Sent from the little guy
Related
Can anyone please help, I recently upgraded to Official ICS 4.0.3 via kies in India and yesterday got root to phone and also installed CWM but unfortunately in recover I clicked on Fix Permissions, after which my phone is not coming back, though its able to boot in recovery as well as download modes.
Could anyone please suggest how can I get back to my phone, I want to install samsung official rom.
Thanks in advance.
maurm said:
Can anyone please help, I recently upgraded to Official ICS 4.0.3 via kies in India and yesterday got root to phone and also installed CWM but unfortunately in recover I clicked on Fix Permissions, after which my phone is not coming back, though its able to boot in recovery as well as download modes.
Could anyone please suggest how can I get back to my phone, I want to install samsung official rom.
Thanks in advance.
Click to expand...
Click to collapse
remove the batt from ur phone wait for 5~10 minutes then replace the batt and switch ON ur phone and see it will do the trick some times
From recovery do data cache wipe.
Or
From recovery if cwm, format data system cache, dalvik and flash stock ROM using Odin.
You can download stock Indian ROM if that what you want.
Just remove the Sim and micro sdcard, before flashing ROM. I found it has issues with ics and csc if I don't on i9100
Thanks for response....I would like to have stock rom for G version of SG2 could you please help me with the links....Though as of now I have got phone running with Divine Rom but its having its restrictions which I'm not happy with.
Thanks in advance
Sent from my GT-I9100G using XDA
Search Samfirmware or use the PC version of Checkfus to get the latest stock rom for your phone model/country/carrier you'd normally get via OTA update.
Thanks
MistahBungle said:
Search Samfirmware or use the PC version of Checkfus to get the latest stock rom for your phone model/country/carrier you'd normally get via OTA update.
Click to expand...
Click to collapse
Thanks mate you saved my day ''Samsung service center sucks here in India'' didn't want go there.....Downloaded firmware from Samfire and then flashed through oden and here I am back to what I had on my phone....could you also advise good ROMS for I9100G and Thanks a ton once again
No probs. Glad you got it sorted
As I don't have an I9100G, I don't know. Questions around "What's the best or a good rom for I9100<whatever>" tend to be frowned upon on here, so I'll leave that up to other people.
Generally it's best to try some roms out for yourself & see what works best for you, but make doubly sure any rom you do try is for the I9100G as you risk bricking your phone if you flash a rom for the I9100 or any other variant on your phone.
maurm said:
Thanks mate you saved my day ''Samsung service center sucks here in India'' didn't want go there.....Downloaded firmware from Samfire and then flashed through oden and here I am back to what I had on my phone....could you also advise good ROMS for I9100G and Thanks a ton once again
Click to expand...
Click to collapse
Cheers
MistahBungle said:
No probs. Glad you got it sorted
As I don't have an I9100G, I don't know. Questions around "What's the best or a good rom for I9100<whatever>" tend to be frowned upon on here, so I'll leave that up to other people.
Generally it's best to try some roms out for yourself & see what works best for you, but make doubly sure any rom you do try is for the I9100G as you risk bricking your phone if you flash a rom for the I9100 or any other variant on your phone.
Click to expand...
Click to collapse
Have searched couple of threads in XDA and have come across some roms....lets see how they come up....I have been Victim of flashing I9100 roms on G version and that time I had to go to Samsung for help which was pathetic...
hi..m using jelly bean i9300XXLH1 and i want to downgrade to ics 4.0.4 any version for galaxy s3 can any body tell to do it....
odin back to stock.. or if you want to flash a custom rom then flash it how you would normally in cwm. format system, wipe cache/dalvik, flash rom, reboot
tusharjoshi4242 said:
hi..m using jelly bean i9300XXLH1 and i want to downgrade to ics 4.0.4 any version for galaxy s3 can any body tell to do it....
Click to expand...
Click to collapse
If you want stock ics..download your region specific firmware from sammobile.com..connect your phone to pc in download mode..open Odin..choose the downloaded firmware as pda and flash..for custom roms..follow the steps mentioned in the previous post..
Sent from my GT-I9300 using xda app-developers app
LH1 is ICS
I had recently upgraded to jb and wanted to downgrade back to ics so i downloaded the rom specific for my country from sammobile and and flashed it using odin..... odin flashed successfully and rebooted and it is stuck on the samsung screen for the past 10 mins, removing the battery also did not help it keeps getting stuck at the samsung screen... any ideas
rubenswing said:
I had recently upgraded to jb and wanted to downgrade back to ics so i downloaded the rom specific for my country from sammobile and and flashed it using odin..... odin flashed successfully and rebooted and it is stuck on the samsung screen for the past 10 mins, removing the battery also did not help it keeps getting stuck at the samsung screen... any ideas
Click to expand...
Click to collapse
Boot into recovery an full wipe.
It should boot normally after
Sent from my GT-I9300 using xda premium
mariosraptor said:
Boot into recovery an full wipe.
It should boot normally after
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yep done that ..... and now it works like a charm .... thank u soooo very much.... for a moment i thought i had it bricked
rubenswing said:
yep done that ..... and now it works like a charm .... thank u soooo very much.... for a moment i thought i had it bricked
Click to expand...
Click to collapse
No worries. It takes alot more to brick it!! Cheers!
Sent from my GT-I9300 using xda premium
mariosraptor said:
Boot into recovery an full wipe.
It should boot normally after
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
that would help me too, how can I do it? you meant CWM???
Yes, but any recovery will do for factory-reset. (There are others than CWM)
ok let me see if I got the instructions correct
download the fw from sammobile, the stock one
flash through odin
if stuck on samsung screen, access to recovery (missing how)
wipe data
enjoy??
sorry for asking this too much but I'm still a noob with samsung devices
alankstiyo said:
ok let me see if I got the instructions correct
download the fw from sammobile, the stock one
flash through odin
if stuck on samsung screen, access to recovery (missing how)
wipe data
enjoy??
sorry for asking this too much but I'm still a noob with samsung devices
Click to expand...
Click to collapse
to boot into recovery, whatever recovery it is either stock or CWM.
turn off the phone ( if it does not turn off by on/off button, just pull the battery and leave it out for 5 seconds),
press and hold with this order: volume up+ home button+ on/off(power button) and keep pressing until the logo. release power button and keep pressing the other buttons.
wipe data + cache + dalvik cache. reboot
tusharjoshi4242 said:
hi..m using jelly bean i9300XXLH1 and i want to downgrade to ics 4.0.4 any version for galaxy s3 can any body tell to do it....
Click to expand...
Click to collapse
I'm new to this but isnt jelly bean better than ics? Why would you wanna downgrade it?
RandyBoyz92 said:
I'm new to this but isnt jelly bean better than ics? Why would you wanna downgrade it?
Click to expand...
Click to collapse
Seems some want JB then no want JB then want ICS then downgrade and come JB release will be posting help i have no JB update .
jje
JJEgan said:
Seems some want JB then no want JB then want ICS then downgrade and come JB release will be posting help i have no JB update .
jje
Click to expand...
Click to collapse
Okey
JJEgan said:
Seems some want JB then no want JB then want ICS then downgrade and come JB release will be posting help i have no JB update .
jje
Click to expand...
Click to collapse
well we downgrade in order to go back to LG8 and install a new OTA, even though we are using OTA's if we have (i.e) LI5 we cannot update to LI9 unless we're on LG8 which is the base, also for warranty purposes hehehe
alankstiyo said:
well we downgrade in order to go back to LG8 and install a new OTA, even though we are using OTA's if we have (i.e) LI5 we cannot update to LI9 unless we're on LG8 which is the base, also for warranty purposes hehehe
Click to expand...
Click to collapse
Nope some users just like the merry go around .
jje
zoot1 said:
If you want stock ics..download your region specific firmware from sammobile.com..connect your phone to pc in download mode..open Odin..choose the downloaded firmware as pda and flash..for custom roms..follow the steps mentioned in the previous post..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hi, Does this work for Galaxy S2 -I9100 also, as I would need to downgrade to ICS 4.0.4 from Jelly bean XXLS6 (Leaked Rom).
hi
my wife is driving me crazy...she upgraded to jellybean 4.1 on her Samsung Galaxy 16GB and is now complaining about the lag time and that she misses the bigger keyboard. She wants to go back to the original ice cream sandwich that came with the phone.
How can I find out what version it is?
SGH-I747
SW-VER: UCLG1
I don't know if sammobile has the firmware...4.0? 4.04? Any help is appreciated--- and what steps to take to complete this....thanks in advance
and I'm in Chicago, USA and ATT is my carrier
themosher said:
hi
my wife is driving me crazy...she upgraded to jellybean 4.1 on her Samsung Galaxy 16GB and is now complaining about the lag time and that she misses the bigger keyboard. She wants to go back to the original ice cream sandwich that came with the phone.
How can I find out what version it is?
SGH-I747
SW-VER: UCLG1
I don't know if sammobile has the firmware...4.0? 4.04? Any help is appreciated--- and what steps to take to complete this....thanks in advance
and I'm in Chicago, USA and ATT is my carrier
Click to expand...
Click to collapse
You are in the wrong forum, and don't publish your imei!
Hi everyone,
I’m new to this forum and not an expert in android but i really need your help so i’ll try to make this post the best i can. Last week I bought a galaxy s2 unlocked but unfortunately it was rooted and with a leaked rom of android 4.0.3 (XXLPH), I wanted to return it to stock so I followed this tutorial (http://forum.xda-developers.com/showthread.php?t=1650919) and also did this (http://forum.xda-developers.com/showthread.php?p=22669088#post22669088) because my lockscreen wasn’t working. But now I am having some troubles:
-Sometimes (today was the third time this week) I lose service and mi imei doesn’t appear when I type *#06#, also it says base band “unknown” in settings but it’s strange because if I remove the battery and put it back again everything works fine again. Does this have to do with my EFS folder? Is there a way to check if it’s corrupted?
-When I connect it to the pc and open kies, it says:
“Your device’s current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LPZ / PHONE:LPH /CSC:LP5 (XXX)”
I thought it was the csc but I checked using *#272*IMEI# and it says “Sales Code: ARO” which I think it’s correct because I’m in Argentina, I also used a code to check the PCode (not this one *2767*4387264636# because it didn’t work, I can’t remember which one) and it said “PCode: NOT ACTIVE” do you think that’s the problem?
Also in settings my serial number shows “00000000” I don’t know if this is related but I’m trying to give you all the information I can.
Sorry if my English is not the best but I speak Spanish, I’m trying to do my best. Any help will be really appreciated!
More details:
GT-I9100
Android 4.0.4
Baseband: I9100UHLPH
Kernel: 3.0.15-1133289 [email protected] #3 SMP PREEMPT
Build: IMM76D.UHLPZ
PDA: I9100UHLPZ
PHONE:I9100UHLPH
CSC:I9100AROLP5
Anyone? Please help!
Easy now.....
First off, you're up for some reading.
1- Brick bug.
2- Flashing (Odin / Mobile Odin).
3- Rooting.
4- EFS Folder.
Once you've done all that you can look for any of these Stock ROMs here.
When you are all done reading and you still wanna flash your device, let us know.
Saludos.
gastonw said:
Easy now.....
First off, you're up for some reading.
1- Brick bug.
2- Flashing (Odin / Mobile Odin).
3- Rooting.
4- EFS Folder.
Once you've done all that you can look for any of these Stock ROMs here.
When you are all done reading and you still wanna flash your device, let us know.
Saludos.
Click to expand...
Click to collapse
Thank you very much! I'll read everything and let you know.
All right i read everything now what should i do?
nahuedu said:
All right i read everything now what should i do?
Click to expand...
Click to collapse
you can start by checking if you got the brick bug, since you are on 4.0.4, with got brickbug app.
If you have an insane chip, flash siyah kernel via odin / mobile odin.
What ROM you wanna flash?
Download hc ktool from store, so you can back up EFS folder.
Sent from the little guy
Ok, so I installed the emmc brickbug app and it says I have an insane chip.
Now I have to root it like this http://forum.xda-developers.com/showthread.php?t=1501719 so I can backup my EFS folder with hc ktool, is this correct? I don’t want to do anything stupid.
Should I also check the memory blocks with the brick bug app?
I would like to flash this rom
I9100UHLPS
Base Firmware: I9100UHLPS (4.0.3)
Region: South America
Country Argentina
Carrier: Unbranded
Build Date: 12 June 2012
Modem: UHLPG
CSC: AROLP4
Change List: 709483
Is it necessary to flash siyah kernel? I would like it to be 100% stock.
You have to flash siyah in order to avoid the brick bug.
Once you flash it you'll be off the hook and flash anything you want.
Don't you wanna try official jelly bean? Don't worry about you being in argentina, it'll work just fine.
You could flash siyah via mobile odin, no brick risk involved.
Sent from the little guy
Ok but what should i do first?
root and backup efs? or just flash siyah?
I don't know how to flash siyah with odin, can I do it with cmw recovery?
Sorry for all these questions but I'm really scared
nahuedu said:
Ok but what should i do first?
root and backup efs? or just flash siyah?
I don't know how to flash siyah with odin, can I do it with cmw recovery?
Sorry for all these questions but I'm really scared
Click to expand...
Click to collapse
Siyah will get you rooted, then you can go backing things up, like EFS.
Watch some youtube vids first, just type i9100 siyah.
After that, get back here and read a thing or two about flashing and stuff at the Q&A section and the guides posted above.
One more thing, enter *#06# in the dialer and see if the imei number matches the imei number below the battery.
Sent from the little guy
Yes, I entered *#06# and the imei number is the same as the one on the back of the battery.
All right I just flashed siyah kernel and did a backup of my EFS folder with hc kTool.
The brickbug check app keeps telling me I have an insane chip, is that ok?
A yellow triangle now appears when I turn on the phone, I guess I'll have to use the triangleaway app am I correct?
What's next?
nahuedu said:
All right I just flashed siyah kernel and did a backup of my EFS folder with hc kTool.
The brickbug check app keeps telling me I have an insane chip, is that ok?
A yellow triangle now appears when I turn on the phone, I guess I'll have to use the triangleaway app am I correct?
What's next?
Click to expand...
Click to collapse
Yeap, triangle away will remove that and reset binary counter.
You can go on and flash JB now
Sent from the little guy
So I have to do it without wiping anything right?
It's ok if I flash the rom I told you before?
nahuedu said:
So I have to do it without wiping anything right?
It's ok if I flash the rom I told you before?
Click to expand...
Click to collapse
Don't you wanna try jelly bean? It's android's latest version.
Sent from the little guy
gastonw said:
Don't you wanna try jelly bean? It's android's latest version.
Sent from the little guy
Click to expand...
Click to collapse
Nah I'll just update it with kies when it comes out in my country.
nahuedu said:
Nah I'll just update it with kies when it comes out in my country.
Click to expand...
Click to collapse
personal, movistar or claro?
You could be talking 4-5 months.
Sent from the little guy
gastonw said:
personal, movistar or claro?
You could be talking 4-5 months.
Sent from the little guy
Click to expand...
Click to collapse
Unbranded!
nahuedu said:
Unbranded!
Click to expand...
Click to collapse
Ok, you'll get it soon enough.
Let the flashing begin.
Sent from the little guy
gastonw said:
Ok, you'll get it soon enough.
Let the flashing begin.
Sent from the little guy
Click to expand...
Click to collapse
But NO WIPING right?
Hi, I have given my wife my old white S2 after deciding to get a black one for myself (from Amazon UK). I had managed to root it and put on an aokp 4.2.2 rom (aokp_i9100_jb-mr1_build6 )which works great although I can't remember which site I used for the instructions. So I get my new black one and start thinking about doing the same...
I thought it would be a good idea to update it to latest stock version to start with but OTA update says my phone is up to date.
KIES finds new firmware but it hangs at 100% complete and goes nowhere.
Here are some numbers:-
Version 4.0.4
Baseband Version i900 BULP8
Build No. IMM76D.BULPG
This BULP8 version looks a bit odd.
I would appreciate some advice on how to proceed...is this a "funny" version?
Here's hoping, alfie
alfienoakes63 said:
Hi, I have given my wife my old white S2 after deciding to get a black one for myself (from Amazon UK). I had managed to root it and put on an aokp 4.2.2 rom (aokp_i9100_jb-mr1_build6 )which works great although I can't remember which site I used for the instructions. So I get my new black one and start thinking about doing the same...
I thought it would be a good idea to update it to latest stock version to start with but OTA update says my phone is up to date.
KIES finds new firmware but it hangs at 100% complete and goes nowhere.
Here are some numbers:-
Version 4.0.4
Baseband Version i900 BULP8
Build No. IMM76D.BULPG
This BULP8 version looks a bit odd.
I would appreciate some advice on how to proceed...is this a "funny" version?
Here's hoping, alfie
Click to expand...
Click to collapse
What do you want to do ?
Sorry, perhaps I wasn't clear.
I want to root it and install aokp 4.2.2 rom.
alfienoakes63 said:
Sorry, perhaps I wasn't clear.
I want to root it and install aokp 4.2.2 rom.
Click to expand...
Click to collapse
To Root you device, flash one of these Custom Kernels: CF-Root (the best) - PhilZ - SpeedMod
To install AOKP 4.2.2 ROM: Flash Omega v12 or Android Open Kang Project or JellyBAM
To install AOSP 4.2.2 ROM: Flash CyanogenMod 10.1
And don't forget to hit the thanks button
Also....while you're running 4.0.4, DO NOT wipe data, cache or dalvik....
Search "emmc brickbug" for why....
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
Yeah, you csn run gotbrick bug from playstore to check your chip. If it's sane you're good, if it's not I advice you to flash a safe kernel (siyah v5).
And then you'll be good to go for flashing CM and s#!t.
Also, stick to xda, not other sites.
Sent from the little guy
thanks everyone I'll check it all out later today and report back. (My chip is "sane")
alfienoakes63 said:
thanks everyone I'll check it all out later today and report back. (My chip is "sane")
Click to expand...
Click to collapse
At times even the so called 'Sane' becomes 'Insane', so flash a brick bug free kernel like 'Siyah v5.0.1" from 'ODIN' to ensure safety on recovery wipes
I'm feeling a bit confused and dim...I've read so many threads...
I found these Philz files
PhilZ-cwm6-BULPG-ATL-3.99-signed.zip
PhilZ-cwm6-BULPG-ATL-3.99.tar.md5
The BULPG seems to match my phone - but which one do I use?
Or, if I going to use siyah I need more detailed instructions... argrrh..please help
First is for recovery second for odin
Send from my SGS2 I9100 with HassanROM and latest DorimanX 8.xx kernel
alfienoakes63 said:
I'm feeling a bit confused and dim...I've read so many threads...
I found these Philz files
PhilZ-cwm6-BULPG-ATL-3.99-signed.zip
PhilZ-cwm6-BULPG-ATL-3.99.tar.md5
The BULPG seems to match my phone - but which one do I use?
Or, if I going to use siyah I need more detailed instructions... argrrh..please help
Click to expand...
Click to collapse
May be its time for u to do some Reading in the first place ( since ur confused for now to choose a kernel properly to flash )
Head to the link below and start reading the same for now
http://forum.xda-developers.com/showthread.php?t=1125282
Good luck !
hmm reading I've done, it's understanding that is the problem.
I thought I'd managed it, I had it rooted with the Philz file and tried installing the aokp 4.2.2 rom but now it won't boot at all... I fear I've done something terrible.
I can boot to the "Philz Touch 3" recovery screen.
EDIT : Update Re-installed the ROM and now I'm up and running thanks everyone, alfie
alfienoakes63 said:
EDIT : Update Re-installed the ROM and now I'm up and running thanks everyone, alfie
Click to expand...
Click to collapse
Good for u!
Please add [SOLVED] to the title of ur post then.
"To err is human, to forgive is divine"
Sent from my SGS II
Hi I was trying to flash my i9100 4.1.2 with 4.4.2 folowing
http://www.ibtimes.co.uk/galaxy-s2-...4-4-2-kitkat-via-omnirom-1433850#.UwJLn85A3iX
when flashed the rom restared the handset to flash the Gapps file it got stuck on the starting samsung screen. I attached the screen shot to this post.
I tried to take the battery out for 10 mins & put it back on its still stuck on this screen.
I am able to go to in download mood & its showing on Odin when connected the handset.
PLease kindly someone help me with it.
Regards,
Hash
will leave the battery out for long & see if it works !!!
Try going into recovery and formatting data? Can you get into recovery? If not flash stock with Odin and try again
At least if I can go back to stock ROM which is 4.1.2 at least Please help
Thanks allot for your respond. No I am not able to go into the recovery unfortunately. only can go into download mood
What do you want help with? Flashing with Odin? First go to Sammobile.com and get 4.1.2 firmware from there. I'll give you a link for flashing with Odin if you can't find a good one.
andrewwright said:
What do you want help with? Flashing with Odin? First go to Sammobile.com and get 4.1.2 firmware from there. I'll give you a link for flashing with Odin if you can't find a good one.
Click to expand...
Click to collapse
I looked it shows GT-I9100 United Kingdom (Vodafone) 2014 January 4.1.2 I9100XWMS2 I9100VODLSF it shows kies symbol
mine is unlocked.
andrewwright said:
What do you want help with? Flashing with Odin? First go to Sammobile.com and get 4.1.2 firmware from there. I'll give you a link for flashing with Odin if you can't find a good one.
Click to expand...
Click to collapse
yes want to flash with Odin or any way as long as it works. I am not done these things before
banu_hashem said:
yes want to flash with Odin or any way as long as it works. I am not done these things before
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1671969
This link is for the S3 but flashing with Odin is the same as with the s2. I link you to this as its a good guide but do remember that's it's for the S3 so don't be silly and flash i9300 firmware on you're i9100. Hope you understand if not tell me and i'll delete the link. Read it and understand what you need to do before you flash with Odin.
Reading is easy, fixing is not. :screwy:
andrewwright said:
http://forum.xda-developers.com/showthread.php?t=1671969
This link is for the S3 but flashing with Odin is the same as with the s2. I link you to this as its a good guide but do remember that's it's for the S3 so don't be silly and flash i9300 firmware on you're i9100. Hope you understand if not tell me and i'll delete the link. Read it and understand what you need to do before you flash with Odin.
Reading is easy, fixing is not. :screwy:
Click to expand...
Click to collapse
Thank you I found the firmware for uk. BUt mine is unlocked i9100 but I found the vodafone version on Sammobile.com. Do you have a link for unbranded 4.1.2 firmware? sorry if I am troubling you & thank you for your valuable time
We're did you find the unlocked firmware
andrewwright said:
We're did you find the unlocked firmware
Click to expand...
Click to collapse
I meant my phone is unlocked but on sammobile.com I found this
GT-I9100 United Kingdom (Vodafone) 2014 January 4.1.2 I9100XWMS2 I9100VODLSF kies
at the end was Kies icon
Pick a carrier free one.
But i can't see the option of choosing carrier
X.......e.......u
If you're planning on rooting and installing a custom ROM again you may as well just go with the Vodaphone one then go from there. I do have a copy of the unbranded one (can't remember where from) so it is out there if you really need it, only downloaded it last week.
I rooted using Philz kernel, if you search XDA for that you will find the info on how to do it and it seemed the easiest way to go...
Dom
theunderling said:
X.......e.......u
Click to expand...
Click to collapse
sorry didn't get what you meant.
Its working!!!
i JUST FLASHED THE STOCK ROM & ITS WORKING!!!
banu_hashem said:
i JUST FLASHED THE STOCK ROM & ITS WORKING!!!
Click to expand...
Click to collapse
Congrats :thumbup:
Well my happiness short lived
the phone started but now it keep coming up error message
Unfortunately, the process com.android.phone has stopped.