I'm quite worried I soft bricked my phone. I am new to a rooted android device. I am more used to an unlocked windows mobile. Here is what I did...
I rooted my handset using blackwofls guide, it worked perfectly. I then installed adfree android from the market, it also worked perfectly.
After that, I went and got font installer, it installed like any other app, opened fine. I chose a font I wanted to use, previewed it, and installed it.
It had prompted me to reboot for the font to take effect. After rebooting my phone will no longer go past the AT&T splash screen. I am very worried since I do not know how to fix it, I don't have a backup of my ICS of any sort. I can however get into ODIN and the recovery mode of clockwork.
I reset my cache and data numerous times, and i did a factory reset, it didn't help me. It just sits at the splash screen and vibrates often. Please help me.
I got you covered man.
---------- Post added at 02:47 AM ---------- Previous post was at 02:44 AM ----------
http://d-h.st/ozL
thanks
ian577416 said:
I got you covered man.
---------- Post added at 02:47 AM ---------- Previous post was at 02:44 AM ----------
link removed due to being a new member
Click to expand...
Click to collapse
This is actually what I had used to fix it. I appreciate your response and help in solving my issue.
Me too
brallyn said:
This is actually what I had used to fix it. I appreciate your response and help in solving my issue.
Click to expand...
Click to collapse
The link was deleted. Could someone please tell me what it was/where it went?
Thanks in advance.
Hey guys,
I need a creative solution to restore my phone to stock for warranty claim. My USB does not work so I don't have the usual option of using Odin.
I thought I had found a solution with Mobile Odin but whenever I try to run, it mentions it is not compatible with my device. I am currently on Hyperdrive 17.1 via SS.
Thanks
guyver2077 said:
Hey guys,
I need a creative solution to restore my phone to stock for warranty claim. My USB does not work so I don't have the usual option of using Odin.
I thought I had found a solution with Mobile Odin but whenever I try to run, it mentions it is not compatible with my device. I am currently on Hyperdrive 17.1 via SS.
Thanks
Click to expand...
Click to collapse
If you are on NC5 I have a nandroid backup of a stock NC5 image that only has root. I could give you a link to my dropbox that has the zip and you could flash through safestrap then unroot, etc.... I imagine that would work. Up to you if you want to try it. Just let me know cuz I'm gonna have to boot into it myself and remove all my contacts and everything.
liljoe727 said:
If you are on NC5 I have a nandroid backup of a stock NC5 image that only has root. I could give you a link to my dropbox that has the zip and you could flash through safestrap then unroot, etc.... I imagine that would work. Up to you if you want to try it. Just let me know cuz I'm gonna have to boot into it myself and remove all my contacts and everything.
Click to expand...
Click to collapse
I mean anything is worth a shot...Can you install that via safestrap?
I guess I'm trying to just go back to full stock and even remove the 'custom' message from the boot screen. If only mobile Odin worked..anyone have experience with that and S4?
guyver2077 said:
I mean anything is worth a shot...Can you install that via safestrap?
I guess I'm trying to just go back to full stock and even remove the 'custom' message from the boot screen. If only mobile Odin worked..anyone have experience with that and S4?
Click to expand...
Click to collapse
@joshm.1219 this seem reasonable to do?
---------- Post added at 05:20 PM ---------- Previous post was at 05:19 PM ----------
guyver2077 said:
I mean anything is worth a shot...Can you install that via safestrap?
I guess I'm trying to just go back to full stock and even remove the 'custom' message from the boot screen. If only mobile Odin worked..anyone have experience with that and S4?
Click to expand...
Click to collapse
Yes, you'd be able to flash my NC5 nandroid via safestrap.
liljoe727 said:
@joshm.1219 this seem reasonable to do?
---------- Post added at 05:20 PM ---------- Previous post was at 05:19 PM ----------
Yes, you'd be able to flash my NC5 nandroid via safestrap.
Click to expand...
Click to collapse
Yes it should work, generally you don't want to use nandroids from another phone of course, but if he's just doing it to return to stock for warranty, it should be enough to get it to boot, etc.
guyver2077 said:
Hey guys,
I need a creative solution to restore my phone to stock for warranty claim. My USB does not work so I don't have the usual option of using Odin.
I thought I had found a solution with Mobile Odin but whenever I try to run, it mentions it is not compatible with my device. I am currently on Hyperdrive 17.1 via SS.
Thanks
Click to expand...
Click to collapse
https://www.dropbox.com/sh/bnhwfph6konr7ad/AACqXaf0UTS9pRP8A7GVS6FHa?dl=0
There you go. You should be able to download these files and put the in extsd/TWRP/backup/d.......
And "restore" in safestrap. You will then need to remove safestrap, supersu, and towel root apps and unroot. You may be able to unroot through supersu but I'm not sure. I hope this works for you...keep me posted so I can delete the dropbox folder if it works. Ill be deleting the folder in a day or two anyway just in case. The files are good but I assume no risk if something does go wrong as I've never done anything like this before...you should be OK though.
You may need to flash this https://www.androidfilehost.com/?fid=23501681358539843 for WiFi also.
Great. Well i have downloaded all files onto my SD in the directory mentioned...
When i go into SS to restore, nothing appears. Any idea?
Try making a folder called 'stock' or something in extsd/TWRP/backups/d...... And moving everything to the new folder.
---------- Post added at 10:35 PM ---------- Previous post was at 10:35 PM ----------
guyver2077 said:
Great. Well i have downloaded all files onto my SD in the directory mentioned...
When i go into SS to restore, nothing appears. Any idea?
Click to expand...
Click to collapse
Try making a folder called 'stock' or something in extsd/TWRP/backups/d...... And moving everything to the new folder.
---------- Post added at 10:44 PM ---------- Previous post was at 10:35 PM ----------
guyver2077 said:
Great. Well i have downloaded all files onto my SD in the directory mentioned...
When i go into SS to restore, nothing appears. Any idea?
Click to expand...
Click to collapse
Actually, hold on. I just found an nc5 flashable zip on my extsd. Gimme a min to upload to dropbox. You will def need the WiFi modules I linked to earlier also.
---------- Post added at 11:10 PM ---------- Previous post was at 10:44 PM ----------
guyver2077 said:
Great. Well i have downloaded all files onto my SD in the directory mentioned...
When i go into SS to restore, nothing appears. Any idea?
Click to expand...
Click to collapse
This is an NC5 flashable zip, just install in safestrap as you normally would. It may just be a ROM but I can't remember. https://www.dropbox.com/s/mth9zpmxqg75jgc/VRUFNC5_Rooted_Stock-v2.zip?dl=0
You should be able to unroot and everything. Let me know how it goes.
try replacing usb port
I started fixing phones (mainly iDonts because screens are a LOT cheaper), but I've replaced a usb port on an s4 active and it took me less than 10 minutes start to finish (for your first time I would watch the youtube video a few times and take as much time as needed, and btw fridge magnets work great for not losing screws)
the part should be $10 to $20 with shipping on amazon, and tool kit is less than $5 (the part might come with tools, look in description)
just search youtube "how to replace usb galaxy s4"
the usb port (and attatched flex cable) is not carrier specific, however, it probably differs from the s4 active and mini, and unfortunately don't have one to see if it is, so be sure to look out for that. The procedure IS different between S4 active, S4 mini, regular S4 so be sure you're watching a how to video on the right model
if you need any help with this, reply to this thread or pm and i will help you out.
Unless you have very shakey hands and/or can't see those small screws, I am confident you can do it, for not much has to come apart to replace the usb. The hardest part is the flex cable connection to the motherboard, but if you disconnect it with a PLASTIC tool, you greatly reduce risk of damage, so use plastic. A magnifier may help to see what you're doing, especially when fitting the new cable connection
Good luck!
edit: just looked back n saw the part about warranty. Well, I'm pretty sure you can get away with this, if it is a defective usb port. Those long samsung cables go bad after awhile so try another one (if you knew that already, disregard) and make sure verizon doesn't claim misuse (i.e. forced cable upside down; I used to work for them, they wouldn't replace phones for that reason but that was almost 4 years ago) just maybe try and make it look well taken care of if going warranty route. I am still pretty sure there are no void stickers on any screws, but I can check as soon as I figure out how to get safestrap back after forgetting to flash supersu after Hyperdrive rls19. I miss mdk...wish i didn't break that $180 display, I went with $100 Asurion claim (btw it was a brand new replacement, so any void stickers would be there)
Anyways, hope this helps, reply if need more, and good luck!
liljoe727 said:
Try making a folder called 'stock' or something in extsd/TWRP/backups/d...... And moving everything to the new folder.
---------- Post added at 10:35 PM ---------- Previous post was at 10:35 PM ----------
Try making a folder called 'stock' or something in extsd/TWRP/backups/d...... And moving everything to the new folder.
---------- Post added at 10:44 PM ---------- Previous post was at 10:35 PM ----------
Actually, hold on. I just found an nc5 flashable zip on my extsd. Gimme a min to upload to dropbox. You will def need the WiFi modules I linked to earlier also.
---------- Post added at 11:10 PM ---------- Previous post was at 10:44 PM ----------
This is an NC5 flashable zip, just install in safestrap as you normally would. It may just be a ROM but I can't remember. https://www.dropbox.com/s/mth9zpmxqg75jgc/VRUFNC5_Rooted_Stock-v2.zip?dl=0
You should be able to unroot and everything. Let me know how it goes.
Click to expand...
Click to collapse
Good news. I'm now on a stock rom! Thanks for all your help.
Now to get rid of the custom lock on boot screen and I should be good to go.
guyver2077 said:
Good news. I'm now on a stock rom! Thanks for all your help.
Now to get rid of the custom lock on boot screen and I should be good to go.
Click to expand...
Click to collapse
If I'm not mistaken, that logo can only be removed with an Odin .tar full wipe, for that custom lock shows up when anything to the ROM is changed, which it still may be. Locked bootloader means anything before the safestrap logo is locked (i think). I may be full wiping via odin today for I need to get root again, so I can let ya know if it gets rid of that.
Obviously I'm still a newb to xda, but I've been rooting for few years now, so keep that in mind. Just tryin to get my thx count up so I can actually post things lol. But if I am wrong about ANY of this, I am open to any criticism (so long as not rude and quick explaination why)
Hope this helps
Edit: maybe try flashing that zip again, but wiping system first? But if you lost safestrap I'm not sure how that is possible
guyver2077 said:
Good news. I'm now on a stock rom! Thanks for all your help.
Now to get rid of the custom lock on boot screen and I should be good to go.
Click to expand...
Click to collapse
You can try triangle away from the play store.
Hi guys,
My nexus 9 WIFI is stuck at the loading screen after I attempted an OTA update. I'd like to get it back to the way it was without wiping data.
I have TWRP as recovery and a custom kernel.
Because of this. my tablet stopped flashing the monthly security updates.
I installed FlashFire to install an OTA. which I downloaded from:
https://developers.google.com/android/nexus/ota#volantis
I picked the MOB30G version as I have the MOB30D currently installed.
Anyway, I ran FlashFire and selected the OTA zip and ran the process. It looked like it worked and then it rebooted.
It then got stuck on the loading screen.
I can still get into recovery if I want to flash a clean install but I'd rather not lose my date. Is there a way I can get this working? Maybe flash stock recovery and then install the OTA via ADB (instructions?)?
Thanks for any help.
Get the latest factory image and use fastboot to flash it. Can be done without wiping data.
Just don't use flash-all script without modifying it, so it doesn't wipe.
---------- Post added at 08:09 PM ---------- Previous post was at 08:03 PM ----------
The link you provided have full OTA images and you could have picked the latest MOB30M
OK I fixed it by flashing the FIRE-ICE kernel again. I think the OTA flash did something to it.
Can you help me?
corkiejp said:
Get the latest factory image and use fastboot to flash it. Can be done without wiping data.
Just don't use flash-all script without modifying it, so it doesn't wipe.
---------- Post added at 08:09 PM ---------- Previous post was at 08:03 PM ----------
The link you provided have full OTA images and you could have picked the latest MOB30M
Click to expand...
Click to collapse
can you help me with my phone i have the same problem and i really need help my phone keeps vibrating when its on the bootscreen. can you pls get back to me asap pls! Thanks
---------- Post added at 08:11 AM ---------- Previous post was at 08:04 AM ----------
mykiller454 said:
can you help me with my phone i have the same problem and i really need help my phone keeps vibrating when its on the bootscreen. can you pls get back to me asap pls! Thanks
Click to expand...
Click to collapse
forgot to mention that my phone is samsung galaxy core prime
@mykiller454 You would be better off posting and looking for help in your device forum. If there is one.
So I bricked my phone and followed GizmoChinas unbricking guide but now it's stuck at a vary old version of EUI and I'd like to update to the latest one, I've tried downloading several versions but I always get the same error, saying that the file is corrupted. What am I doing wrong?
robbabora said:
So I bricked my phone and followed GizmoChinas unbricking guide but now it's stuck at a vary old version of EUI and I'd like to update to the latest one, I've tried downloading several versions but I always get the same error, saying that the file is corrupted. What am I doing wrong?
Click to expand...
Click to collapse
I faced this as well and is very annoying, download this stock ROM:
http://107.155.41.76/219/46/52/letv-hdtv/0/upload/tmp/20170412134536641/LE_X2_X820-CN-FN-FEXCNFN5902303111S-5.9.023S.zip?crypt=52aa7f2e65936&b=123456&nlh=4096&nlt=60&bf=43&p2p=1&video_type=zip&termid=0&tss=no&platid=5&splatid=500&its=0&qos=5&fcheck=0&amltag=88885&mltag=88885&path=23.248.189.143&proxy=1805330764,1744299852,467476952&uid=1452143078.rp&keyitem=GOw_33YJAAbXYE-cnQwpfLlv_b2zAkYctFVqe5bsXQpaGNn3T1-vhw..&ntm=1492063200&nkey=ef9b5c68af3bcbf84dc17efb3201b542&nkey2=01e78c345895c3ad4c29fc2bfe841f9c&geo=GB-0-0-100&errc=0&gn=900&vrtmcd=109&buss=88885&cips=86.141.241.230
---------- Post added at 02:12 AM ---------- Previous post was at 02:03 AM ----------
The thing is stock recovery only works with Leeco's stock firmware, very annoying.
I would recommend this thread https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Here's the deal,
1. I was on resurrection remix 7.1 custom rom with TWSRP recovery installed.
2. Wanted to go back to stock huawei honor 5x OS so I downloaded it on the internet, since I live in Malaysia, I searched for "Huawei Honor 5x Stock Rom Malaysia Variant"
3. Flash the rom, got EMUI 2.0 instead of the written EMUI 3.1 on the file (the file name is KIW-L22_C636B130_Firmware_Android 5.1_EMUI 3.1_Malaysia.zip"
4. Flashed HONOR_5X_Firmware_KIW-L22_Android 6.0.1_EMUI 4.0.1_C675B360CUSTC675D002.zip that I got from huawei's website
5. Stuck in bootloop.
6. I went into TWRP recovery and tried to do something but I couldn't use the touchscreen for some odd reason
7. Went and browsed XDA for around 2 hours and found that I can install another recovery that uses the volume buttons and the power buttons to navigate, thus I installed a recovery called "carliwm touch recovery"
8. Was happy could finally do something, successfully flashed the recovery. Went and downloaded Lineage OS rom based on my mistakes that I've done and never want to go back to stock rom.
9. The recovery has an option to mount the external sd card (my sd card in my phone, dont know why it's called as such), so I did, I still couldn't navigate using the touchscreen as it's disfunctional still but can still navigate using volume and power buttons.
10. Wiped all data, flashed Lineage OS, flashed GAPPS.
11. Stuck in recovery for some reason, can't get into my phone. I've re-flashed it many times
For those who want to know my phone model, it's KIW-L22. When it had stock rom it was EMUI 4 something, can't remember as it's very vague. I think it was marshmallow
Please help
EDIT:
I use Huawei Update Extractor to get into the stock rom that had EMUI 2.0, extracted the System and Recovery images
Used this video ( https://www.youtube.com/watch?v=EoZQHTidnGA&t=629s ) to flash back to stock rom that had EMUI 2.0
The only way to get out of the recovery is to reboot the phone
In the bootloader, it says "PHONE Unlocked" and "FRP Unlock"
UPDATE:
I've tried to follow the video again and re-flashed the stock rom with EMUI 2.0 and it still doesn't work
I've wiped everything in the phone using the recovery (wiped data and factory reset), going to sleep as it's 4:37 AM
This is what happens when you dont read the guides that are posted all over this forum, we have seen it so many times I have lost count and also the inclination to help sort out the mess, I would never ever in my life download any firmware that wasn't posted on XDA or flash a phone without reading guides on here first as they usually not only give the correct information but usually point to the correct firmware.
Beauty fades but stupid is forever...Judge Judy !
swukjay said:
This is what happens when you dont read the guides that are posted all over this forum, we have seen it so many times I have lost count and also the inclination to help sort out the mess, I would never ever in my life download any firmware that wasn't posted on XDA or flash a phone without reading guides on here first as they usually not only give the correct information but usually point to the correct firmware.
Beauty fades but stupid is forever...Judge Judy !
Click to expand...
Click to collapse
Well, sorry for my stupidity man, not everyone's perfect. Am I forever stuck like this?
TurtleKicks said:
Well, sorry for my stupidity man, not everyone's perfect. Am I forever stuck like this?
Click to expand...
Click to collapse
Your touchscreen isn't working and your getting a bootloop because you probably have the wrong boot.image this is clealy the case as your touch screen isn't working, if you search through my guides for al10 which i cant be bothered to get the link for now one of them has a link to a twrp image of what i rhink is l22, anyway its a twrp image, you can flash that using twrp and it should restore your phone, good luck
---------- Post added at 04:03 AM ---------- Previous post was at 03:56 AM ----------
https://forum.xda-developers.com/honor-5x/how-to/solution-to-downgrade-netcom-al10-3gb-t3718355
This is for the AL10 but should be of use to you, download the twrp image, you will need to make a backup first of your phone then follow the instructions, you cant restore using a update.app as you have wrecked the system image and ruined the version check so this is your best hope to reatore tour phone and install lineage, good luck
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
swukjay said:
Your touchscreen isn't working and your getting a bootloop because you probably have the wrong boot.image this is clealy the case as your touch screen isn't working, if you search through my guides for al10 which i cant be bothered to get the link for now one of them has a link to a twrp image of what i rhink is l22, anyway its a twrp image, you can flash that using twrp and it should restore your phone, good luck
---------- Post added at 04:03 AM ---------- Previous post was at 03:56 AM ----------
https://forum.xda-developers.com/honor-5x/how-to/solution-to-downgrade-netcom-al10-3gb-t3718355
This is for the AL10 but should be of use to you, download the twrp image, you will need to make a backup first of your phone then follow the instructions, you cant restore using a update.app as you have wrecked the system image and ruined the version check so this is your best hope to reatore tour phone and install lineage, good luck
Click to expand...
Click to collapse
In your case tick everything including modem But dont tick EFS
swukjay said:
Your touchscreen isn't working and your getting a bootloop because you probably have the wrong boot.image this is clealy the case as your touch screen isn't working, if you search through my guides for al10 which i cant be bothered to get the link for now one of them has a link to a twrp image of what i rhink is l22, anyway its a twrp image, you can flash that using twrp and it should restore your phone, good luck
---------- Post added at 04:03 AM ---------- Previous post was at 03:56 AM ----------
https://forum.xda-developers.com/honor-5x/how-to/solution-to-downgrade-netcom-al10-3gb-t3718355
This is for the AL10 but should be of use to you, download the twrp image, you will need to make a backup first of your phone then follow the instructions, you cant restore using a update.app as you have wrecked the system image and ruined the version check so this is your best hope to reatore tour phone and install lineage, good luck
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
In your case tick everything including modem But dont tick EFS
Click to expand...
Click to collapse
sorry but im using a CWM based recovery right now, its this one https://forum.xda-developers.com/showthread.php?t=2471479 cause i cant touch anything i read somewhere that they recommend using this when theres no touch functionality
EDIT: I've done what you told me based on your guide, still doesn't work, probably cause I'm using the CWM based recovery
Dan Ger said:
Hey man im from Malaysia too,im sorry for you because right now you got bricked your device.. eventually when you already flash 4.1 emui you cant go back to stock rom...
And you have flash wrong system number for our Malaysian version..i cant help
Click to expand...
Click to collapse
So there's no hope for me? If I were to send it to a phone repair shop, it won't do anything?
TurtleKicks said:
sorry but im using a CWM based recovery right now, its this one https://forum.xda-developers.com/showthread.php?t=2471479 cause i cant touch anything i read somewhere that they recommend using this when theres no touch functionality
Click to expand...
Click to collapse
Then you will need to use adb to flash the boot partition, you have a major job on your hands which will be especially difficult for a noob, this is why its best to read the guides !
swukjay said:
Then you will need to use adb to flash the boot partition, you have a major job on your hands which will be especially difficult for a noob, this is why its best to read the guides !
Click to expand...
Click to collapse
is this website trustable? https://android.****************/ho...actory-images-android-using-fastboot-0175277/ as a guide
huh nevermind, its censored, then do you have any idea how to flash the boot partition?
This will be my last instructions then the rest is down to you..
Download minimal adb and unzip it
Download Huawei extractor tool
Download stock update.apo for any honor 5x
Use huawei extractor and open update.app with it
Extract boot.img
Place e boot.img in minimal adb folder
Download hiapp from web
Install hiapp
Plug phone into computer in adb mode
Open adb command window
Type adb devices to check its there
Type fastboot flash boot boot.img
Then install twrp
Fastboot flash recovery twrp.img "or whatever file name it is"
No fastboot reboot recovery
Now install lineage
Now hit the thanks button and write a guide on why guides are important
swukjay said:
This will be my last instructions then the rest is down to you..
Download minimal adb and unzip it
Download Huawei extractor tool
Download stock update.apo for any honor 5x
Use huawei extractor and open update.app with it
Extract boot.img
Place e boot.img in minimal adb folder
Download hiapp from web
Install hiapp
Plug phone into computer in adb mode
Open adb command window
Type adb devices to check its there
Type fastboot flash boot boot.img
Then install twrp
Fastboot flash recovery twrp.img "or whatever file name it is"
No fastboot reboot recovery
Now install lineage
Now hit the thanks button and write a guide on why guides are important
Click to expand...
Click to collapse
I did everything that you told me but I still dont have touchscreen functions in TWRP. I used the boot.img from HONOR_5X_Firmware_KIW-L22_Android 6.0.1_EMUI 4.0.1_C675B360CUSTC675D002
TurtleKicks said:
I did everything that you told me but I still dont have touchscreen functions in TWRP. I used the boot.img from HONOR_5X_Firmware_KIW-L22_Android 6.0.1_EMUI 4.0.1_C675B360CUSTC675D002
Click to expand...
Click to collapse
Your last option is e-recovery
swukjay said:
Your last option is e-recovery
Click to expand...
Click to collapse
im very sorry but what's e-recovery?
https://m.youtube.com/watch?v=CHjL2AIQXKw
Follow the instructions and use erecovery to dowload latest rom
---------- Post added at 08:21 AM ---------- Previous post was at 08:21 AM ----------
Bet you wish you read those guides now !
swukjay said:
https://m.youtube.com/watch?v=CHjL2AIQXKw
Follow the instructions and use erecovery to dowload latest rom
---------- Post added at 08:21 AM ---------- Previous post was at 08:21 AM ----------
Bet you wish you read those guides now !
Click to expand...
Click to collapse
boy i wish i read those guides. Okay I got into e-recovery and im using the power buttons to navigate through the menu, I use my power button to select the "Download latest version and recovery." and got into the wifi section, pressed download recovery and its starting to Connect to Wifi. Now I'm stuck in selecting wifi. I cant even use my power buttons to choose my wifi but i can choose the back option using the volume and power keys, what do i do now?
TurtleKicks said:
boy i wish i read those guides. Okay I got into e-recovery and im using the power buttons to navigate through the menu, I use my power button to select the "Download latest version and recovery." and got into the wifi section, pressed download recovery and its starting to Connect to Wifi. Now I'm stuck in selecting wifi. I cant even use my power buttons to choose my wifi but i can choose the back option using the volume and power keys, what do i do now?
Click to expand...
Click to collapse
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
---------- Post added at 08:38 AM ---------- Previous post was at 08:36 AM ----------
swukjay said:
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
Click to expand...
Click to collapse
Doesnt the touchscreen work now to select the wifi? If you can see it you should be able to select it, i cant suggest any more its down to you now
swukjay said:
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
Click to expand...
Click to collapse
sorry but what's the L24? You've mentioned that for a while now. I'm using the Huawei Honor 5X, model KIW-L22, not L24. Nevertheless, does that affect what I'm doing right now?
swukjay said:
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
---------- Post added at 08:38 AM ---------- Previous post was at 08:36 AM ----------
Doesnt the touchscreen work now to select the wifi? If you can see it you should be able to select it, i cant suggest any more its down to you now
Click to expand...
Click to collapse
Touchscreen doesn't work at all, can't do anything except for navigating using the power buttons
TurtleKicks said:
sorry but what's the L24? You've mentioned that for a while now. I'm using the Huawei Honor 5X, model KIW-L22, not L24. Nevertheless, does that affect what I'm doing right now?
Click to expand...
Click to collapse
Should all be the same, all use the same cpu so drivers should all be the same, as i said I cant do any more now if erecovery isnt working and you have no touch screen after flashing boot.img your in the poop, send it to a service center
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
Personally i dont think you flashed the boot.img correctly but there we go
---------- Post added at 08:49 AM ---------- Previous post was at 08:44 AM ----------
swukjay said:
Should all be the same, all use the same cpu so drivers should all be the same, as i said I cant do any more now if erecovery isnt working and you have no touch screen after flashing boot.img your in the poop, send it to a service center
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
Personally i dont think you flashed the boot.img correctly but there we go
Click to expand...
Click to collapse
L22
https://www.hihonor.com/in/support/details/
---------- Post added at 08:52 AM ---------- Previous post was at 08:49 AM ----------
May also help,
https://www.google.co.uk/amp/s/foru...ds-to-stock-rom-flashing-custom-t3358468/amp/
Cant do no more now its down to you... get that boot.img to flash and your touchscreen will work then your problem is solved.... Good luck !
swukjay said:
Should all be the same, all use the same cpu so drivers should all be the same, as i said I cant do any more now if erecovery isnt working and you have no touch screen after flashing boot.img your in the poop, send it to a service center
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
Personally i dont think you flashed the boot.img correctly but there we go
---------- Post added at 08:49 AM ---------- Previous post was at 08:44 AM ----------
L22
https://www.hihonor.com/in/support/details/
---------- Post added at 08:52 AM ---------- Previous post was at 08:49 AM ----------
May also help,
https://www.google.co.uk/amp/s/foru...ds-to-stock-rom-flashing-custom-t3358468/amp/
Cant do no more now its down to you... get that boot.img to flash and your touchscreen will work then your problem is solved.... Good luck !
Click to expand...
Click to collapse
Oh my God! I rebooted the phone, pressed the volume up button then BAM the phone boots into Lineage OS! Touchscreen is working, everything is working! Thanks for your help! Making the guide on why reading guides are important haha!
TurtleKicks said:
Oh my God! I rebooted the phone, pressed the volume up button then BAM the phone boots into Lineage OS! Touchscreen is working, everything is working! Thanks for your help! Making the guide on why reading guides are important haha!
Click to expand...
Click to collapse
Nice one glad its working
---------- Post added at 12:02 PM ---------- Previous post was at 12:00 PM ----------
Dont forget to MAKE A BACKUP !