Hello Everyone,
I badly need help on my Huawei Honor U8860 phone. I have recently updated it from 2.3.6 to 4.03 over WIFI and the update went smoothly. So now here is what my phone have:
Kernel Version: 3.0.8-perf-00059-g3a757a2 [email protected] #1
Build Number: U8860IV100R001C00B923SP01
I have not rooted the phone at this time. It was working fine until 2 days ago when I started getting messages on the screen like:
"Unfortunately, 2D Home has stopped"
"Unfortunately, Google Play has stopped"
"Unfortunately, Contacts has stopped"
"Unfortunately, Settings has stopped"
"Unfortunately, Google Play Music has stopped"
"Unfortunately, Browser has stopped"
And so on, and so forth. It seems that all apps and processes have stopped when I try to use them so I literally can't use the phone. I went through several threads here just trying to restore my phone back to a
working state. I tried to do the following in order but without success:
1.) Factory data reset / erase everything - the phone boots to the recovery menu then it formats the /Data, /Cache and /HWUserData then it reboots. After reboot, the phone is back to where it was before the factory data reset with everything in it including downloaded apps.
2.) Manually uninstalled all downloaded apps. Removed screen lock (just to see if phone behavior changes). Then rebooted the phone but after reboot, all the apps are still installed and the screen lock is back as well.
3.) I tried to Force Update with the following official ROMs: B886, B919 and B923 but I always get the message "Update failed" during the update process.
4.) I downloaded the file "recovery-u8860-en.img" so I can replace the "recovery.img" file . Rebooted the phone w/ the pink screen and connected it to my PC but there is no USB mass storage device mounted.
5.) Finally, I tried to root the phone. I enabled USB debugging. I installed the ADB drivers then I downloaded the U8860 root tools and rootexplorer.apk. When I ran the "root-me.cmd", it tried to copy some files to the phone but it failed. The error was "read-only file system".
So it seems that the problem is because of the "read-only filesystem". I does not permit/allow any changes made to the phone. Can you help me restore my phone?
Please.. Can somebody help me on this?
Thanks, clint2rose
clint2rose said:
Please.. Can somebody help me on this?
Thanks, clint2rose
Click to expand...
Click to collapse
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
clint2rose said:
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
Click to expand...
Click to collapse
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
kaefert said:
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
Click to expand...
Click to collapse
thanks for the reply. it did not work. I even formatted the internal SD. Re-run the firmware update but it failed. when i boot the phone, all the contents of the internal SD remains intact. any other suggestion?
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
kaefert said:
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
Click to expand...
Click to collapse
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
clint2rose said:
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
Click to expand...
Click to collapse
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
kaefert said:
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
Click to expand...
Click to collapse
Thank you once more for your time. Most of the thread I read regarding these patches often used the phrase" you have to flash the current version of your ROM using the patch"...
And yes I created dload folder, place the UPDATE.APP and put it on the sdcard. I turned off the phone and removed the battery. Then I pressed vol+ vol- and power on/off button. The firmware update went to about 70% installing before displaying update failed.
I guess I will have to bring my phone to a repair center. My only problem is that there is no Huawei service center at my place (I reside here in Saudi Arabia). I got the phone as a free device on a broadband package and the warranty is already expired. I'm a little worried to take the phone to the small mobile repair shops as they might screw up the phone even more. Huawei is not a popular device here unlike iPhone, HTC and Samsung Galaxy.
As I understood that your device is rooted, you should get some custom ROM and try to install it.
okty2k said:
As I understood that your device is rooted, you should get some custom ROM and try to install it.
Click to expand...
Click to collapse
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
clint2rose said:
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
Click to expand...
Click to collapse
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
kaefert said:
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
Click to expand...
Click to collapse
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
U8860 not responding
clint2rose said:
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
Click to expand...
Click to collapse
Have you find the solution yet? I have the same problem. Somehow my phone system is "locked". I can't install or uninstall app. Some google apps keep showing not responding. Everything changes i made, keep showing up after the phone rebooted.
This was happen a few days after I upgrade to ICS B932SP01 and rooted my phone (to remove original chinese apps).
Luckily i have friend in huawei indonesia. He gave my u8860 to the technical support. But the result was no good.
They try everything, even install my phone with the original GB and always failed.
The last suggestion is change the phone machine, which is as same as buy a new phone.
I really appreciate is someone can help me here...
Thanks
Related
I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Any pro. expert help you
danaber11 said:
I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Click to expand...
Click to collapse
My Suggestion is to take back to the Huawei service centre , might they help you !
Or any expert will help you here and get you out of trouble
danaber11 said:
I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Click to expand...
Click to collapse
I need more detailed description of actions your friend perfomed, and version of your firmware. Also, if you do not afraid of russian language, you can check this thread (to download any attachments, you must be logged in, or it give you 404).
SionGrey said:
I need more detailed description of actions your friend perfomed, and version of your firmware. Also, if you do not afraid of russian language, you can check this thread (to download any attachments, you must be logged in, or it give you 404).
Click to expand...
Click to collapse
I was able to get some info on what Z did. After rooting the phone with Root Bin4ry v18, he copied the contents of the System folder in the gapps package, using es file explorer, into the system folder of the phone. He then restarted the phone and now it goes straight to bootloader and will not flash the ROM. Unfortunately, I could not tell you what firmware was on it other than the latest one. The one bright spot in all of this is that Z made a copy of original system folder. I think I just need to get that back into the system folder on the phone and I should be all set.
danaber11 said:
I was able to get some info on what Z did. After rooting the phone with Root Bin4ry v18, he copied the contents of the System folder in the gapps package, using es file explorer, into the system folder of the phone. He then restarted the phone and now it goes straight to bootloader and will not flash the ROM. Unfortunately, I could not tell you what firmware was on it other than the latest one. The one bright spot in all of this is that Z made a copy of original system folder. I think I just need to get that back into the system folder on the phone and I should be all set.
Click to expand...
Click to collapse
have you try data wipe in recovery ?
if no so check and try wiping :good:
That was the first thing I tried.
Hi!
This is my first time ever posting here and although I've found some topics relating to my issue, none have helped me out.
My problem:
I downloaded an app called Flashify.
From the app, I downloaded android 4.4 KitKat because I wanted to update my ROM.
When I booted my phone into recovery (stock <3e>), I clicked on install from SD card, installed the .zip file but I got an error...
It read:
"E:failed to verify whole-signature"
"E:signature verification failed"
"E:update fail and delete temp files"
"formatting /cache..."
Instalation aborted.
Now, if I try to set up my phone again, I'll get as far as the welcome screen and it will always say:
"Unfortunately, Setup Wizard has stopped."
Please help.
I've tryed everything and I can't get rid of that error!
Thank you
Oh by the way, I forgot to give some details
The phone is a Huawei Ascend g330 U8825-1
Android 4.0.4 ICS
Rooted
Running stock everything (or at least it was...)
The file I tryed to install is called: "gapps-kk-20140105-signed-4.4.zip"
Did you even look at a guide on how to update your phone? Actually, I am quite sure you didn't or else you completely misunderstood everything you read. Neither is a good thing when trying to do something complicated like updating your phone unofficially.
1) You can't install a custom rom with stock recovery.
2) You didn't even download a rom - those are the Google Apps that are to be installed along with a custom rom like CyanogenMod.
3) You have to unlock the bootloader to install the custom recovery that will allow you to install updates not signed directly by Huawei.
I suggest you read through this thread:
http://forum.xda-developers.com/showthread.php?t=2198908
There are links in the later pages to a version of 4.4.2 from the Modaco forums, as well as links to the original firmware, which you will probably need to re-install if a factory reset doesn't help.
es0tericcha0s said:
Did you even look at a guide on how to update your phone? Actually, I am quite sure you didn't or else you completely misunderstood everything you read. Neither is a good thing when trying to do something complicated like updating your phone unofficially.
1) You can't install a custom rom with stock recovery.
2) You didn't even download a rom - those are the Google Apps that are to be installed along with a custom rom like CyanogenMod.
3) You have to unlock the bootloader to install the custom recovery that will allow you to install updates not signed directly by Huawei.
I suggest you read through this thread:
http://forum.xda-developers.com/showthread.php?t=2198908
There are links in the later pages to a version of 4.4.2 from the Modaco forums, as well as links to the original firmware, which you will probably need to re-install if a factory reset doesn't help.
Click to expand...
Click to collapse
I'm new to all of this and I thought that the app that I downloaded could do it all in one operation.
I wanted to take a chance and see would happen, thinking that any consequences that may occur, could be fixed with a factory reset.
Thanks for the link and the advice.
I'll have a read, now
Is it a serious problem or is there any way to fix it?
I tryed unlocking the Bootloader in DC-Unlocker but to no avail.
ASUS MeMO Pad 8 (K011) ME181C Recovery Guide
The following is a list of what we can currently do with this tablet. It assumes firmware versions with the WW prefix (WW-3.1.23.1xx).
Root Status: Obtained
Bootloader: Locked
CWM Recovery Possible: Yes (Tethered)
Custom ROMS: None
The following information is for recovering your tablet and obtaining root only. The bootloader is locked on the device at this time.
Tethered CWM recovery
This is a temporary solution to unsigned loading. The bootloader on the device is currently locked, so after rebooting, it will revert back to standard recovery. Use this to restore to a stock firmware or to install SuperSU.
Download the official firmware and extract it.
Rename UL-K011-WW-3.1.23.172-user.zip to user.zip.
Copy user.zip to the root of your SD card.
Enable USB debugging on your tablet.
Run Launcher.bat.
Type ACCEPT.
Choose option T3.
This will reboot in to the Tethered Recovery.
Choose Install Zip from external SD card.
Choose user.zip
Reboot once finished.
Bootable Image for Recovery
This file is to be used if your system will not get past the Asus or Intel logo. Boot the system using Volume Up and Power. Once the logo appears, let go of power. Once in DroidBoot, use fast boot to flash the boot and system images. This is provided in case signature verification fails on the official images.
fastboot flash system system.img
fastboot flash boot boot.img
This file also contains adb and fastboot. If your tablet is not detected, try the Asus drivers.
Reboot the system and use the CWM tethered recovery to reinstall the official firmware.
OTA Updates
If you’ve recovered from the official firmware on the Asus site, you’re probably sitting at version WW-3.1.23.172. Here are the OTA updates to bring your system up to the current version of WW-3.1.23.189. There are two different OTA updates available here, so the process will need to be completed twice. Update 172 to 183 and Update 183 to 189.
Boot in to recovery, press the volume keys several times and install from ADB.
Extract the RAR file and rename the files update.zip.
On your PC, open a command prompt and change to the directory containing the update file
Assuming ADB is installed on the system, type: adb sideload update.zip
Once the process completes, reboot your system and update apps as needed.
Repeat this process for any additional update files.
Recovery image
This is the default recovery for the tablet. If you get adventurous and try to flash another one, this may come in handy.
can you explain
RemmyLee said:
All thanks to vampirefo for his work on this.
FB Tethered Recovery Launcher
Kind of curious if this method will work with the other versions of the tablet to allow SuperSU to be installed. Anyone want to try it?
Long story short, I screwed this thing messing with the framework. For some reason, the official firmware from the Asus site was failing signature verification when trying to reinstall. Someone managed to grab a stripped system image that at least gave me a launcher and USB debugging. This beauty allowed me to get the firmware installed and everything back to normal, as well as installing SuperSU.
If you have any trouble getting the tablet to show up in Windows, the Asus distributed drivers work like a charm.
Click to expand...
Click to collapse
can you explain in lamens terms or retard terms what this means you found? so me and others
as well can understand ? Please and thank you i have a ASUS MEMO Pad 8 Me181c Rooted With Frame1.4apk it took me to demo and i turned it off and rebooted and now it just goes to The ASUS Logo and then Intel Logo and Stops . If i could find a way to install CWM on this maybe i could get somewhere but all i see is people talking about it but no video tutorials , or walkthroughs
Any Help Would be greatly appreciated
1. https://cloud.mail.ru/public/2b47381cb37c/ADB.rar - This contains adb and fastboot if you don't already have them installed. This also contains the system image that we're going to use temporarily to get this thing restored.
2. Hook it up to your computer and load up Fastboot on the tablet (Volume+ and Power while booting. Let go of power after the logo shows up).
3. Flash the System image ( fastboot flash system system.img) followed by the boot image (fastboot flash boot boot.img)
4. Reboot.
5. https://www.androidfilehost.com/?fid=95857557620392052 - Next, we're going to use a temp version of CWM-Recovery to reinstall firmware. Enable USB debugging, run launcher.bat, type "ACCEPT" and choose T3.
6. You'll auto reboot into CWM-Recovery. Grab the official firmware from the Asus site and install the zip from SD. Once complete, you'll need to reroot the device most likely. If you have a SuperSU zip, install it after you've restored the system.
You're done. This also opens us up for just about anything. Go play with your system. As long as you don't mess up your boot loader, this should save you.
Sent from my K011 using XDA Free mobile app
Asus MeMo Pad 8 - Pro 7 Entertainment Pad
Hey guys,
I have a Asus MeMo Pad 8 - Pro 7 Entertainment Pad. Now the model is K011 and the firmware starts with LVL bla bla bla.
Technically it is the same as the 181C and I also have managed to achieve root. Any ide if I could get the WW firmware and rom working on this?
UPDATE:
Using this method gives you version 172 of the firmware. Current version is 189. So here are the OTA updates.
To use these files, Start up the system in Droidboot, Volume+ and Power, go to recovery. You'll be sitting a broken android robot screen. Press the volume keys several times. It's give you some options. We're going to install from adb.
Unrar the update file provided, rename the file to update.zip and sideload it to the tablet. Once it finishes, reboot and wait for the system to update. Rinse, lather, repeat for 183 to 189.
Files:
OTA update 172 to 183
OTA update 183 to 189
Note: This is only if the OTA updates aren't pushing to your device. If you've got them, you can skip this.
fulishone: If the intel tether works for you, you could always try it, but I have no idea if it would work or not. If you have your system backed up, you could always give it a go and restore if it fails.
I'll try to compile everything in to a more readable format later. I just want to get the info up right now. A lot of people were semi bricked either because of a root gone bad or file system problems.
shadow2483 said:
can you explain in lamens terms or retard terms what this means you found? so me and others
as well can understand ? Please and thank you i have a ASUS MEMO Pad 8 Me181c Rooted With Frame1.4apk it took me to demo and i turned it off and rebooted and now it just goes to The ASUS Logo and then Intel Logo and Stops . If i could find a way to install CWM on this maybe i could get somewhere but all i see is people talking about it but no video tutorials , or walkthroughs
Any Help Would be greatly appreciated
Click to expand...
Click to collapse
If you need any more help than whats above, let me know.
fulishone said:
Hey guys,
I have a Asus MeMo Pad 8 - Pro 7 Entertainment Pad. Now the model is K011 and the firmware starts with LVL bla bla bla.
Technically it is the same as the 181C and I also have managed to achieve root. Any ide if I could get the WW firmware and rom working on this?
Click to expand...
Click to collapse
To answer your question, yes. This will work. We have the same firmware for our devices.
http://www.asus.com/my/Tablets/ASUS_MeMO_Pad_ME181CX/HelpDesk_Download/
RemmyLee said:
To answer your question, yes. This will work. We have the same firmware for our devices.
http://www.asus.com/my/Tablets/ASUS_MeMO_Pad_ME181CX/HelpDesk_Download/
Click to expand...
Click to collapse
Ok, I am not new to flashing and custom roms and so on, but follwing your guide above, I should first flash .172 and then use your update files for .183 and the .189?
What do you mean with Intel thether?
Best regards
fulishone said:
Ok, I am not new to flashing and custom roms and so on, but follwing your guide above, I should first flash .172 and then use your update files for .183 and the .189?
What do you mean with Intel thether?
Best regards
Click to expand...
Click to collapse
Yep. That'll get you updated to the current firmware. I contacted ASUS yesterday and sadly, there are no plans on bringing Lollipop to this thing, nor are they interested in giving us an unlocked bootloader.
As for the Intel Tether, where the bootloader is locked, we can use a tethering method to access CWM recovery, but once we reboot, it reverts back to the standard recovery. This prevents us from using custom roms at this time. When it reboots, it checks signatures. The official firmware was not installing using the standard methods, so I used CWM to reinstall. That's why I included it above.
BBY builds
My guess is that this won't work with the BBY build. From what I understand no one has rooted an ME181C that has a BBY build. I also have not been able to connect the device to my PC. From reading this thread though it appears that to connect through the device drivers I need to boot into one of the recovery mode. Is that correct? I can see my sd cards okay when connected, but can't see the device through ABD.
et1ssgmiller said:
My guess is that this won't work with the BBY build. From what I understand no one has rooted an ME181C that has a BBY build. I also have not been able to connect the device to my PC. From reading this thread though it appears that to connect through the device drivers I need to boot into one of the recovery mode. Is that correct? I can see my sd cards okay when connected, but can't see the device through ABD.
Click to expand...
Click to collapse
I'm curious to know if the tethered method would allow a temporary CWM session to install SuperSU on the BBY line. I haven't seen anyone try it yet. If USB debugging is enabled, the tethered restore should try to automagically do everything for you. If you boot in to recovery, can you do a fastboot devices?
Can´t mount external sd card anymore
After using CWM tethered recovery to backup my rom, i cant mount my external sd card anymore. Any ideas?
Updates
RemmyLee said:
UPDATE:
Using this method gives you version 172 of the firmware. Current version is 189. So here are the OTA updates.
To use these files, Start up the system in Droidboot, Volume+ and Power, go to recovery. You'll be sitting a broken android robot screen. Press the volume keys several times. It's give you some options. We're going to install from adb.
Unrar the update file provided, rename the file to update.zip and sideload it to the tablet. Once it finishes, reboot and wait for the system to update. Rinse, lather, repeat for 183 to 189.
Files:
URLS removed to post
Note: This is only if the OTA updates aren't pushing to your device. If you've got them, you can skip this.
fulishone: If the intel tether works for you, you could always try it, but I have no idea if it would work or not. If you have your system backed up, you could always give it a go and restore if it fails.
I'll try to compile everything in to a more readable format later. I just want to get the info up right now. A lot of people were semi bricked either because of a root gone bad or file system problems.
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------
Thanks for posting this. It helped recover my tablet to 172. I see 172 on ASUS's website, but not the updates, and my tablet says it's up to date. Can you advise what 183 and 189 provide? Any new features or enhanced stability or performance.
Thanks in advance. Very much appreciated.
tperki said:
---------------------------------------------------------------------------------------------------------
Thanks for posting this. It helped recover my tablet to 172. I see 172 on ASUS's website, but not the updates, and my tablet says it's up to date. Can you advise what 183 and 189 provide? Any new features or enhanced stability or performance.
Thanks in advance. Very much appreciated.
Click to expand...
Click to collapse
For some reason, OTA updates for this thing don't want to download. I've not seen too much of a change between them, but I applied them just to be current.
Success
RemmyLee said:
For some reason, OTA updates for this thing don't want to download. I've not seen too much of a change between them, but I applied them just to be current.
Click to expand...
Click to collapse
Yeah, strange that it won't update over the air. But thanks to your assistance I am running build 189. It may just be wishful thinking, but the device does seem a bit peppier. Thank you RemmyLee!!!!
[Update] Since updating to build 189, the device is much more stable and snappier. This was definitely worth doing. I don't understand why ASUS would not be pushing this out to everyone with this device.
Just wanna say thanks to the OP. Got my tablet back from the service center and was wondering why some apps were missing. Sure enough I was on WW...179. Nice to have updates and recoveries in one place. Great work!
Thank you so much bro, I have been googling a lot trying to find a root method and just discovered that I can easily have recovery and flash supersu zip thanks to you!!
Me181c not working...
Hi guys, I was using SoftKeyZ for about 2 weeks, I wanted to set my navigation buttons to it's default, so I tried using Backup of the SoftKeyZ, but when it rebooted the tablet, I lost my navigation buttons and indeed my notification and status bar. It rebooted again automatically, and this time when it started, I got an error which says: "Unfortunately, KeyguardTestActivity haas stopped", the error prevents me from unlocking the tablet and using it, so I cannot use it at all. I don't know how to go to recovery mode on my tablet, I used the button tips but it didn't work for me. I've downloaded the official rom from asus.com . Pleeeeeeeeeeeeeeeeeeeeeease, I need your help guys, you're my last chance...
should I do a complete wipe ?
Hi,
Thanks for the help in this thread.
I followed the instructions and successfully flashed the update firmware file. I was expecting for the tablet to be reset to original factory condition but found that all my apps ect were still there. I guess the user.zip is an update rather that a full ROM or should I have wiped everything first ?
I am have problems with the tablet such as Bluetooth has stopped working and wifi will only connect to very strong signal, (as in touching the router) which is why I wanted to completely wipe the device a start fresh.
f I wipe everything will the firmware file be able to restore the system fully?
Is there a complete firmware image file that can be downloaded any where ?
Thanks in advance for any advice
update : so fed up with no Bluetooth so I took the chance and did a full factory wipe and the system restored ok with the firmware file. Bluetooth problem solved, (Wifi did not, probably Hardware issue)
Thanks again
Signature failure
Thanks to your instructions, I've successfully managed to update my device to build WW-3.1.23.172, however, when trying to install 172 to 183 update I get a signature verification failure message.
Any ideas why this is happening?!
Hi guys!
This is my first time to post a thread in this forum, I just bought a Samsung Note with model SHV-E160S, Android Version 4.0.4 and Build# IMM76D.VH29. I know that this is a Korean Variant and I'm using it here in Philippines (I can send SMS -- Openline). I don't know if this phone is already rooted, I don't know how to check.
What I'm trying to accomplish is to upgrade this phone from 4.0.4 to 4.1.2 then later on upgrade it to Android Lollipop 5.1 and I don't know how. It will be a great pleasure if someone help me or direct me on what should I do.
I'm totally new to android devices and I'm not familiar on how to upgrade,update or root an android device.
Thanks!
Hello guys, any ideas? Thanks!
jakeortega said:
Hi guys!
This is my first time to post a thread in this forum, I just bought a Samsung Note with model SHV-E160S, Android Version 4.0.4 and Build# IMM76D.VH29. I know that this is a Korean Variant and I'm using it here in Philippines (I can send SMS -- Openline). I don't know if this phone is already rooted, I don't know how to check.
What I'm trying to accomplish is to upgrade this phone from 4.0.4 to 4.1.2 then later on upgrade it to Android Lollipop 5.1 and I don't know how. It will be a great pleasure if someone help me or direct me on what should I do.
I'm totally new to android devices and I'm not familiar on how to upgrade,update or root an android device.
Thanks!
Click to expand...
Click to collapse
Hello guys, any ideas? Thanks!
You'll be able to find your firmware here https://mega.nz/#F!IxJTDDQQ!TTgzxjX8d7EnzemoIj0ogg
4.1.2 was the last official update from Samsung for your device. If you want to update to newer than that, it will have to be done via updating with a custom recovery and custom rom, such as TWRP recovery and CyanogenMod 11 or 12/12.1.
Follow upgrade instructions from here http://forum.xda-developers.com/showthread.php?t=1424997 and sub your firmware file instead of N7000.
es0tericcha0s said:
You'll be able to find your firmware here https://mega.nz/#F!IxJTDDQQ!TTgzxjX8d7EnzemoIj0ogg
4.1.2 was the last official update from Samsung for your device. If you want to update to newer than that, it will have to be done via updating with a custom recovery and custom rom, such as TWRP recovery and CyanogenMod 11 or 12/12.1.
Follow upgrade instructions from here http://forum.xda-developers.com/showthread.php?t=1424997 and sub your firmware file instead of N7000.
Click to expand...
Click to collapse
Thank you es0tericcha0s for this information.
What I'm trying to do right now is updating my SHV-e160s from 4.0.4 to 4.1.2 using Kies v2.6. Unfortunately, I'm getting this error "Failed to run firmware upgrade: unknown error.". Until now, I'm afraid to update my firmware manually as I don't have much knowledge to do that.
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
es0tericcha0s said:
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
Click to expand...
Click to collapse
Alright, I'll try these steps immediately and will comeback for the result. Thanks again.
es0tericcha0s said:
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
Click to expand...
Click to collapse
Hello, sorry I forgot to ask, will this root my device? I'm afraid I might bricked it.
No, this is just the official update. As long as the download is good and you follow those directions, you won't do anything that won't be easily recoverable if it doesn't work right away. Soft bricking is not a big deal and nothing you would do here would cause anything worse unless you unplug the phone in the middle of something important.
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
And because you'll probably ask... It's easy to root. Just download Chainfire's SuperSU zip, put it on your phone's storage and use Odin to install TWRP recovery (just like you do with the whole firmware package) , boot to recovery before it boots to the OS and install the zip. Reboot and enjoy.
es0tericcha0s said:
No, this is just the official update. As long as the download is good and you follow those directions, you won't do anything that won't be easily recoverable if it doesn't work right away. Soft bricking is not a big deal and nothing you would do here would cause anything worse unless you unplug the phone in the middle of something important.
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
And because you'll probably ask... It's easy to root. Just download Chainfire's SuperSU zip, put it on your phone's storage and use Odin to install TWRP recovery (just like you do with the whole firmware package) , boot to recovery before it boots to the OS and install the zip. Reboot and enjoy.
Click to expand...
Click to collapse
Hello again es0tericcha0s, I haven't tried the instructions that you gave me yesterday as I'm still downloading the firmware, last night I encountered an issue after enabling my Bluetooth, something like "NFC Service has stopped." just keeps on popping up. So I turned off the bluetooth then restarted my phone, it went well for a while.
After that, I enabled my 3G Cellular Data to check what was NFC service error is, after a few minutes, I lost my signal, phone turned to No Service, then in Settings -> About Phone, I got an Unknown Baseband.
EDIT
I got No Service since last night up until now.
EDIT Oct. 13, 2015 9:49 AM +08:00 Manila Time
I manage to update my phone from ICS 4.0.4 to JB 4.1.2. But still, my baseband is Unknown and I have no signal.
If it did that before you tried to flash anything...that doesn't sound good. Hard to say without testing it, but kind of sounds like the baseband chip (hardware issue).
es0tericcha0s said:
If it did that before you tried to flash anything...that doesn't sound good. Hard to say without testing it, but kind of sounds like the baseband chip (hardware issue).
Click to expand...
Click to collapse
I also though of that, hopefully not.
When I first got the phone, my gf sent me our pictures via bluetooth , no issues occured. After a while, I noticed that there are so many photos of the previous owner (around 1000+) and mp3s (around 1000+ also). So I connected the phone via usb to my pc and deleted all those pictures and mp3s inside the My Computer -> SHV-E160S -> Phone (Computer\SHV-E160S\Phone). After doing so, I started to encouter some issues, when enabling the bluetooth, the phone hangs and reboots then the error 'NFC service has stopped' keeps on popping up, until it went Unknown Baseband.
Now, the phone keeps on rebooting similar to the symptoms that it gets when baseband version is unknown.
I'm looking for solutions to fix the unknown baseband and saw the Back up and Restore EFS, I just need to root the device to try this fix. Maybe I'll post an update whether if I manage to solve this problem or not, if it didn't fix the issue then maybe the problem is the baseband chip. what a crap!
This is my reference for the EFS Fix
http://techbeasts.com/2014/07/13/fix-samsung-galaxy-unknown-baseband-version-guide/
Thanks!
Rooting will be easy. Just install TWRP with Odin and use the SuperSU zip from Chainfire. Process should take like 5 minutes once everything is downloaded.
es0tericcha0s said:
Rooting will be easy. Just install TWRP with Odin and use the SuperSU zip from Chainfire. Process should take like 5 minutes once everything is downloaded.
Click to expand...
Click to collapse
So I need to install TWRP first before rooting the device? Also I'm planning to use a rooted stock firmware which is 4.1.2, I just don't know the difference between UH24 and MH2, I've read that UH24 is already old and it's better to use a MH2 build and what is the Recovery UH24/MH2?
EDIT:
I forgot, I cannot check my current Baseband since it is still unknown.
EDIT: 12:30PM +8:00
I managed to get my Build#, it is MH2, I'm currently looking for a rooted 4.1.2 MH2 download link.
Way faster and easier to use the method I outlined, but either way should work.
es0tericcha0s said:
Way faster and easier to use the method I outlined, but either way should work.
Click to expand...
Click to collapse
Sorry, I'm really a root virgin here. While following your advise, I'm also currently looking at this guide -> http://forum.xda-developers.com/showthread.php?t=1924535. I'm done downloading Tegrak for MH2, a small problem I encountered here is I don't have a folder named 'sdcard' in my phone, so I created one and copied the 'Kernel' .zip, also I copied it to usbStorage folder.
I'm about to flash the 'Recovery' .tar to my phone. Hoping a success result
Should be fine. Your phone's internal storage is seen by the OS as /sdcard. Doesn't matter where you put the file as long as you remember where it's at so you can navigate to it through recovery to install.
es0tericcha0s said:
Should be fine. Your phone's internal storage is seen by the OS as /sdcard. Doesn't matter where you put the file as long as you remember where it's at so you can navigate to it through recovery to install.
Click to expand...
Click to collapse
Oh crap, I didn't thought of that. Installing 'Kernel' .zip now.
jakeortega said:
Oh crap, I didn't thought of that. Installing 'Kernel' .zip now.
Click to expand...
Click to collapse
Finally! I'm done rooting my phone, though I encountered another issues again. My Menu Button and Back Button does not work.
UPDATE: 4:08PM +8:00GMT
I think I found the problem as to why my Menu button and Back button doesn't work. I'v check my Baseband and it is -> E160SKSJMH1 and my Build # is -> JZO54K.E160SKSJMH2. Am I using a wrong FW as supposed to what I should be using? Which build should I install, the MH1 or the MH2?
Also, the Tegrak Kernel I've used is Build 48 for SHV-E160S MH2. I've also tried factory resetting the phone but the issue still exists.
Thanks!
UPDATE: 4:41PM +8:00GMT
Managed to fixed the issue by updating my Touch Firmware. Cool!
Hi all!
I'm new here, so please instruct me if I'm doing anything wrong.
I have a Coolpad Y82-820. It's a Chinese phone, I think.
I'm in the process of getting it rooted. ---- Was rooted before, but an update on their side (to CoolUI V24. [phone model#]. 160407) removed the root and now makes it a bit difficult to root at the moment, though I'm sure it will be done eventually. For those who have this phone, I'd suggest not to update, as this update deletes any rooting applications installed on reboot/restart.
Once rooted, I don't really mind waiting, I would like to put a Custom Rom on this phone, but not sure what options are available. I see posts about the Coolpad Note/Dazen/Shine/Rogues etc. Though nothing about this one, though spec wise it's not too far off from the others.
I'd be grateful if anyone could help with confirmations, information, on how to select a correct custom rom for this device and the steps to do. Also if there's any info on how to root this current version, even better.
Thanks!
Some details of the phone below:
Model Number
Coolpad Y82-820
CPU
Qualcomm Technologies, Inc MSM8916 Quad-core 1.2 GHz
RAM
2G
Internal memory
Total 8G
Resolution
960 * 540
Android version
4.4.4
Kernel version
3.10.28
[email protected] #1
Thu Apr 7 17:01:56 CST 2016
Build number
4.4.005.150730.Y82_820
Any help possible?
Rooting maybe? Even possibly downgrading would be an option.
Johny2k9 said:
Any help possible?
Rooting maybe? Even possibly downgrading would be an option.
Click to expand...
Click to collapse
Did you try towelroot?It's best for rooting Kitkat.https://towelroot.com/
Røbin said:
Did you try towelroot?It's best for rooting Kitkat.https://towelroot.com/
Click to expand...
Click to collapse
Gave it a shot. Failed, as well. I've tried most of the popular rooting apps. King Root, Kingo, One click, and so on as well as a few Chinese rooting apps, as well. They've all failed.
The previous version was rooted with King Root though.
Johny2k9 said:
Gave it a shot. Failed, as well. I've tried most of the popular rooting apps. King Root, Kingo, One click, and so on as well as a few Chinese rooting apps, as well. They've all failed.
The previous version was rooted with King Root though.
Click to expand...
Click to collapse
In that case you have to root your phone manually by unlocking bootloader.But as a Chinese phone don't need to unlock bootloader.But you need to have a recovery that can install flashable zip.Most of this phone have built in recovery.You can go to recovery by turning off your phone and press power+volume down button.Then see if there's any option to install zip.
Røbin said:
In that case you have to root your phone manually by unlocking bootloader.But as a Chinese phone don't need to unlock bootloader.But you need to have a recovery that can install flashable zip.Most of this phone have built in recovery.You can go to recovery by turning off your phone and press power+volume down button.Then see if there's any option to install zip.
Click to expand...
Click to collapse
There is an option there to install zip files. Though I do not know the process well of doing so. Most zips I have tried have failed. I did install GMS several days ago using the install zip method. Not certain if that was a good idea though...
If I can find a flashable zip then I wouldn't mind giving it a try. I've restored this phone countless times hoping to go back to factory firmware, but that doesn't seem to be the case. It seems to go back to the most recent updated OTA which makes it unable to root with regular apps at the moment.
Not sure what the closest phone model for this phone would be. If you have ideas I'm willing to give them a shot an report back in with any findings.
Johny2k9 said:
There is an option there to install zip files. Though I do not know the process well of doing so. Most zips I have tried have failed. I did install GMS several days ago using the install zip method. Not certain if that was a good idea though...
If I can find a flashable zip then I wouldn't mind giving it a try. I've restored this phone countless times hoping to go back to factory firmware, but that doesn't seem to be the case. It seems to go back to the most recent updated OTA which makes it unable to root with regular apps at the moment.
Not sure what the closest phone model for this phone would be. If you have ideas I'm willing to give them a shot an report back in with any findings.
Click to expand...
Click to collapse
https://download.chainfire.eu/696/supersu/ go to this link,download UPDATE-SuperSU-v2.46.zip and install it.This is the way to have root manually.
Røbin said:
https://download.chainfire.eu/696/supersu/ go to this link,download UPDATE-SuperSU-v2.46.zip and install it.This is the way to have root manually.
Click to expand...
Click to collapse
I got an error:
正在查找更新包
正在打开更新包
正在验证更新包
E : failed to verify whole-file signature
E : signature verification failed 安装失败
我会汉语一点儿，所以这个汉字我都明白了，如果你有问题我可以试一试告诉你。 My Chinese isn't too bad, so if there's something you don't understand let me know.
Letting you know the steps I did, just in case I did it wrong.
- Downloaded the UPDATE-SuperSU-v2.46.zip
- Placed it on the phone internal memory (recovery only recognizes internal)
- Powered off
- Went into recovery mode
- Then tried installing the file.
Then the mentioned error.
Should I have restored the phone to the most recent OTA, cleared cache, data, first etc?
Johny2k9 said:
I got an error:
正在查找更新包
正在打开更新包
正在验证更新包
E : failed to verify whole-file signature
E : signature verification failed 安装失败
我会汉语一点儿，所以这个汉字我都明白了，如果你有问题我可以试一试告诉你。 My Chinese isn't too bad, so if there's something you don't understand let me know.
Letting you know the steps I did, just in case I did it wrong.
- Downloaded the UPDATE-SuperSU-v2.46.zip
- Placed it on the phone internal memory (recovery only recognizes internal)
- Powered off
- Went into recovery mode
- Then tried installing the file.
Then the mentioned error.
Should I have restored the phone to the most recent OTA, cleared cache, data, first etc?
Click to expand...
Click to collapse
Ok i'll give you a last solution to root your device.
first go to this linkhttp://www.file-upload.net/download-7267586/usb_driver.rar.html and download the driver file and extract the file.Now first enable developer options in your phone to enable usb debug and connect your phone to pc.In your pc right click on Computer/My PC icon and go to manager.click device manager and you will see your connected device.Now click on your device and find install driver,go and find the extracted file to install driver.After installing driver download root genius from this linkhttps://mega.nz/#!G4US0aTA!rfkmf4GSUJ75FSpq3_OBzKw58WLlExImjzlHVti5rbM,Install it and open the app.Your device will automaticlly connect to root genius.Now the final step is to click root word,click the green box,wait for 10 minute to complete the rooting process.your phone will reboot.all done.now check your device if its rooted or not by installing root checker app via google play store.
Røbin said:
Ok i'll give you a last solution to root your device.
first go to this linkhttp://www.file-upload.net/download-7267586/usb_driver.rar.html and download the driver file and extract the file.Now first enable developer options in your phone to enable usb debug and connect your phone to pc.In your pc right click on Computer/My PC icon and go to manager.click device manager and you will see your connected device.Now click on your device and find install driver,go and find the extracted file to install driver.After installing driver download root genius from this linkhttps://mega.nz/#!G4US0aTA!rfkmf4GSUJ75FSpq3_OBzKw58WLlExImjzlHVti5rbM,Install it and open the app.Your device will automaticlly connect to root genius.Now the final step is to click root word,click the green box,wait for 10 minute to complete the rooting process.your phone will reboot.all done.now check your device if its rooted or not by installing root checker app via google play store.
Click to expand...
Click to collapse
Also failed.
I guess it's too difficult to root this new version/update. If only I could downgrade then it might be possible to root.
Johny2k9 said:
Also failed.
I guess it's too difficult to root this new version/update. If only I could downgrade then it might be possible to root.
Click to expand...
Click to collapse
There's no available firmware to downgrade. Bad luck for you.
Røbin said:
There's no available firmware to downgrade. Bad luck for you.
Click to expand...
Click to collapse
Is upgrade impossible without rooting?
Johny2k9 said:
Is upgrade impossible without rooting?
Click to expand...
Click to collapse
You can upgrade or downgrade your android version without rooting but it has to be official firmware. If you want to flash custom rom you'll need custom recovery installed and unlocked bootloader.
Røbin said:
You can upgrade or downgrade your android version without rooting but it has to be official firmware. If you want to flash custom rom you'll need custom recovery installed and unlocked bootloader.
Click to expand...
Click to collapse
I wouldn't mind upgrading. Though what would be the process to get the official firmware?
Johny2k9 said:
I wouldn't mind upgrading. Though what would be the process to get the official firmware?
Click to expand...
Click to collapse
I think you didn't get what I said.You are already using updated android version. You can't update more if your service provider don't give anymore updates.And I also searched very hard to find official firmware for your device but unluckily your phone have very less information in web.So there's no one haven't uploaded any firmware or no discussion available for your device.You can though upgrade your device using custom rom but you need to have root and custom recovery .without root you can't install custom recovery.
Røbin said:
I think you didn't get what I said.You are already using updated android version. You can't update more if your service provider don't give anymore updates.And I also searched very hard to find official firmware for your device but unluckily your phone have very less information in web.So there's no one haven't uploaded any firmware or no discussion available for your device.You can though upgrade your device using custom rom but you need to have root and custom recovery .without root you can't install custom recovery.
Click to expand...
Click to collapse
Hahh... So after combing through various Chinese sites and using my limited knowledge of Chinese, I've got a ROM (previous version before there update), got the appropriate flashing software (CoolPad Download Assistant) and have successfully flashed it after disassembling the phone to get into fastboot.
Good news:
I am Rooted... again. With KingRoot.
Bad news:
The CoolPad has there update in the background. Found where it's stored and deleted. The Phone re-downloads the update.
A restart will probably update this phone making it un-rootable again.
Edit: Deleting the update file before immediately restarting gives an error in the update on restart, so I guess that's a good thing.
For now, I will just operate for now without turning the phone off. Though I do have the necessary files if I have to flash it again.
Rooting is the first requirement you mentioned... what do I need to do next? Download what? Compatible ROM's etc?
Johny2k9 said:
Hahh... So after combing through various Chinese sites and using my limited knowledge of Chinese, I've got a ROM (previous version before there update), got the appropriate flashing software (CoolPad Download Assistant) and have successfully flashed it after disassembling the phone to get into fastboot.
Good news:
I am Rooted... again. With KingRoot.
Bad news:
The CoolPad has there update in the background. Found where it's stored and deleted. The Phone re-downloads the update.
A restart will probably update this phone making it un-rootable again.
Edit: Deleting the update file before immediately restarting gives an error in the update on restart, so I guess that's a good thing.
For now, I will just operate for now without turning the phone off. Though I do have the necessary files if I have to flash it again.
Rooting is the first requirement you mentioned... what do I need to do next? Download what? Compatible ROM's etc?
Click to expand...
Click to collapse
If you have no interest in custom rom and now you can root your device then you don't need to do anything right now.And you are saying new update automatically downloading,just in download setting select "do not auto download"or"update via wifi only"this will prevent from auto downloading update.
Røbin said:
If you have no interest in custom rom and now you can root your device then you don't need to do anything right now.And you are saying new update automatically downloading,just in download setting select "do not auto download"or"update via wifi only"this will prevent from auto downloading update.
Click to expand...
Click to collapse
I disabled the update part, thank you.
I would prefer a custom rom, what options would I have?
Johny2k9 said:
I disabled the update part, thank you.
I would prefer a custom rom, what options would I have?
Click to expand...
Click to collapse
Not sure if there's any custom rom available for your phone You can somehow install custom twrp recovery but the main problem is custom rom availability.But I would suggest you to use xposed instead installing custom ROM.You can customize and control your device using xposed installer.
Røbin said:
Not sure if there's any custom rom available for your phone You can somehow install custom twrp recovery but the main problem is custom rom availability.But I would suggest you to use xposed instead installing custom ROM.You can customize and control your device using xposed installer.
Click to expand...
Click to collapse
Installed Xposed Installer, but the Download section is empty.
I am in China currently, so a lot of things may be blocked. A VPN should fix this, I believe.
What things I should install. Xposed Installer is new to me.