Hello to all,
I bought the following unit...
T090A BMW E92 Auto Panel Android 4.04 Car PC DVD with Wince6.0 GPS 3G WiFi Bluetooth ipod support 1.2G Dual Core and 1G DDR2 Memory
Wince6 works properly now, and at the beginin android too, the problem is that now Android system dont start, seems to start to load but remain in the load screen with "android" word animated ...
What can I do? install android again? how?
Thanks a lot
i forgot: of course I dont know what bottons press to enter in recovery mode or similar.
can someone help me?
thanks in advance
Related
Hey Guys,
I have searched everywhere and can't seem to find a root for this device: Aocos N19 9.7 inch Android 2.3 Tablet PC Capacitive Telechips TCC8803 Cortex A8 Flash1.2GHZ 512MB/8GB
From the "About" page in the settings it has this information:
Model Number: HW type: MT8801_IL_8
Android Version: 2.3.3
Kernel Version: 2.6.35.7-tcc
Build number: V2.323
I have tried Gingerbreak (left it for over 30min in rooting screen) and SuperOneClick (remains in waiting for device, have tried troubleshooting such as turning on and off Debugging Mode".
I have scoured over "unofficial CyanogenMod7 port for RK2818 tablets" however it says that this will likely brick you device if it is not listed, which this device is not. I hope I don't sound like a noob here, and any help will be appreciated.
Tablet info:
CPU
Telechip TCC8803 Cortex A8 1.2GHZ
GPU Integrated chip
Operating System Android 2.3
RAM 512MB DDR3
Storage 8GB
Storage Other microSD(TF) up to 32GB
Camera 2.0Mp
Screen Size 9.7 inch
Screen Resolution 1024×768
Screen Type Capacitive
Screen Output HDMI
Video HD Support None
Internet Connections WIFI Flash
Wifi
802.11 b/g
3G External
GPS None
Battery 6400mAh
Music around the state About 10 hours
About the video mode About 4 hours
Video formats MKV(H.264 HP),AVI,RM/RMVB,FLV,MPEG-1,MPEG-2
Music formats MP3/WMA/APE/FLAC/AAC/AC3/WAV
Picture formats JPG/BMP/GIF/PNG
E-book formats PDF/TXT/CHM/UMD/PDB
Language Multi-language
Screen calibration Support
Clock function Support
Calendar function Support
Remote control functions None
G-sensor function Support
Transmission Interface USB 2.0
Other functions None
Anyone there? haha
try this
try with the attached superoneclick in case you can't find one from the net.
Use super manager app for root access.
Cheers.
Good luck
To root your aocos n19, you need:
-VTC Driver v4.01 for 2000 XP.exe (to install driver of your device);
-and SuperOneClick (personaly, I did it with superoneclick v2.3.3);
-your aocos n19, a PC with windows 2000 or XP and a USB cable.
First, run "VTC Driver v4.01 for2000 XP.exe" to install the driver.
Then plug your aocos n19.
Finally run superoneclick and press "root" button.
Your aocos n19 is now rooted, and if you want you can unroot it with superoneclick.
Hi, sorry for making my first message here with a problem.
I have a Woxter Android TV 200 ("spanish" version of Noontec A9 - RK2918, 512MB RAM and GC800 graphics). This android-PC had 2.3 for default and the company doesn't provide any higher.
So, searching, I found that Noontec A9 is similar and it has a 4.0 ROM . I flashed it with RK Batch Tool without problems, BUT... when I did the root (I did with a .bat and adb), in one step ("enabling emulator hack"), then it rebooted again... It didn't work. When I turn on it, it shows the penguin of Linux and nomore...
It doesn't turn on properly because I can't see it connected to my wifi router. It hasn't any button, only 2 USB, 1 SD Reader, 1 HDMI-out and 1 RGB out.
Please, help me :crying:
Hi guys,
First of all, my sincere appologies if I have posted in the wrong section, but I have used the search button and haven`t found an answer to my question (s).
I have a Vauxhall Insignia ans have installed an android chinese unit on it. Everything works fine, as it should, but as human nature I want something more.
So, I was wondering, if there is anyway in which I can dump the whole system in the computer and emulate it in order to see what it can do and what I can change?
So, basically, what do I need to do to emulate the whole operating system which is present on the android unit, on my Windows PC? How can I dump the system and emulate it on the computer? What app do I need and what software do I need to run on the computer !
On the unit,it`s Android 4.4.4 and the computer is Windows 10. I can connect via USB on the android unit, if that helps.
Thank you for your time and answers !
Hello there,
Recently i've installed android x86 4.4 kitkat behind my Windows
And now i am having some problems
1st:- When I start Android The Mouse Pointer Does'nt show up, still the mouse works i can click on any button, but pointer does'nt showing.
2nd:- I have Wingle-Cloud Wifi Device Which Directly Connected to Desktop PC(This Pc)by USB PORT. which runs well in Windows but how can i run in Android?
I cannot run Internet in Android X86 because of this.
Any Help Much be Appreciated!
Thanks In Advance!
Regards,
SHoCK
Contact:- [email protected]
+923073732716
Hi please move this thread to the right section...
I'm installing android nougat on my old laptop
Specs are:
1GB ram
And an Intel atom N450 running at 1.6GHZ
but when it installs it just comes up with missing OS or if I boot it off a USB stick it stays on a blinking cursor help me ASAP!
Screenshots below
I have also attached how my partitions are formatted to help people a lot
Have I done something wrong or missed anything out?