Related
Okay, so I've seen these issues dealt with separately, but never in conjunction. Unfortunately, I am having both in conjunction.
Starting with a fresh Droid Eris, I used a one-click root to allow superuser permissions.
From there, I flashed CM7. Along with many other users, I ran into the issue where I had no data or voice signal.
I'll let you know here, that I've wiped EVERY time I did anything. This is NOT a wipe issue.
I flashed the newest radio... No luck. So, I went through clockwork's recovery and reverted back to the original 2.1 ROM. Still no luck on the signal issue. At this point, I decided to reflash CM7 and try to deal with the issue through ADB.
This is where things went wrong. The load for CM7 corrupted (I'm assuming) and gave me a nice case of Bootloop. Thinking everything was fine, (Assuming I'd do a battery pull and just go back to 2.1) I booted into the original Android recovery and NOW the damn track ball will no longer make selections. It will scroll, but not select.
Here's my question: Seeing as I can not boot fully to allow usb debugging, and I can not recover through Android (Thank you, trackball), is there ANY way to reflash the original RUU through ADB?
Thus far, I can't get passed the obvious "This device is not ready," prompt.
Any help is greatly appreciated.
FYI, adb is available when the custom recovery is booted.
what that means is that with the recovery booted you can:
1) drop a smallish (say, less than 100 MB) ROM file into /cache (e.g. "adb push")
2) create an Android command file (/cache/recovery/command) with a single line that points at the ROM file as an update
3) do a "adb shell reboot recovery"
This will cause the subsequent boot to the recovery to automatically install the ROM file you dropped in cache.
Voila. No trackball needed.
The syntax for the command file (/cache/recovery/command) will be a single line:
--update_package=CACHE:your_ROM_file_name_goes_here.zip
See this post for an expanded explanation.
cheers
[ Edit ]
Note that the above is a thumbnail sketch which requires you to fill in the blanks. For instance, wiping /data and /cache and flashing packages after the main ROM. Cumbersome, but you only need to do it once. Once you have a rooted ROM installed, you should flash a trackball-free version of the recovery so you don't need this method for every ROM you install. Instructions for that (using "flash_image" via adb) can be found elsewhere.
Scott,
Whoa! You got a lot going on there...
Okay, I don't have all of the answers here for you, but I know enough to ask a few questions that we'll need a clarification on.
1. Can you tell us your HBOOT version and whether its S-ON or S-OFF?
2. You mentioned that you've used ClockworkMod (not good , but maybe not terrible)...you also have mentioned using/having Amon_RA custom recovery. Which custom recovery do you have currently installed and can you boot into said recovery?
3. By the way, I think the voice/data signal thing is fixable--it sounds familiar to me, but I don't know the answer right off-hand and this is not your primary issue at the moment.
4. You should be able to run the RUU to restore 2.1 back to your phone. It doesn't require a working custom recovery running and/or adb. Although you might simply be asking if you can flash a ROM through adb, then the answer is yes, you can. Although you will need custom recovery running to make sure its adb server is running and that, of course, require USB connectivity (alluding to your "This device is not ready." message).
5. Usually, installing HTC Sync will install the USB drivers necessary for you to use adb. If that doesn't work for you, PM me with your email address and I'll send you about 10MBs worth of USB drivers I've collected over the last year that might help you with this issue.
6. Lastly, there is a version of Amon_RA's custom recovery available that does not require the use of the trackball. You're not really in a position to flash/install that at this point unless you have the S-OFF engineering bootloader.
I'll hold-off with additional info pending your responses to the above.
Cheers!
edit: trumped by the Master himself, LOL! [I knew you'd be along sometime soon, bftb0 ]
scary alien said:
Scott,
Whoa! You got a lot going on there...
Okay, I don't have all of the answers here for you, but I know enough to ask a few questions that we'll need a clarification on.
1. Can you tell us your HBOOT version and whether its S-ON or S-OFF?
2. You mentioned that you've used ClockworkMod (not good , but maybe not terrible)...you also have mentioned using/having Amon_RA custom recovery. Which custom recovery do you have currently installed and can you boot into said recovery?
3. By the way, I think the voice/data signal thing is fixable--it sounds familiar to me, but I don't know the answer right off-hand and this is not your primary issue at the moment.
4. You should be able to run the RUU to restore 2.1 back to your phone. It doesn't require a working custom recovery running and/or adb. Although you might simply be asking if you can flash a ROM through adb, then the answer is yes, you can. Although you will need custom recovery running to make sure its adb server is running and that, of course, require USB connectivity (alluding to your "This device is not ready." message).
5. Usually, installing HTC Sync will install the USB drivers necessary for you to use adb. If that doesn't work for you, PM me with your email address and I'll send you about 10MBs worth of USB drivers I've collected over the last year that might help you with this issue.
6. Lastly, there is a version of Amon_RA's custom recovery available that does not require the use of the trackball. You're not really in a position to flash/install that at this point unless you have the S-OFF engineering bootloader.
I'll hold-off with additional info pending your responses to the above.
Cheers!
edit: trumped by the Master himself, LOL! [I knew you'd be along sometime soon, bftb0 ]
Click to expand...
Click to collapse
Yup bftb0 is a beast at these things, lol
I recently purchased a used Galaxy tab 10.1 I/O, and it had already received the 3.1 OTA update.
Now i want root access for various reasons, and can't seem to find a clear guide on how to do so.. I've found plenty about how to do so on the original 3.0 rom, and that it will carry through the 3.1 update, or for the regular version Galaxy Tab 10.1, but it's my understanding the ROMs were fairly different between the I/O and the retail version and that attempting to cross-pollinate root methods may not be a good idea
although I've rooted and ROMed my fair share of HTC devices and Nooks i'm a little more apprehensive with this unit, as it's my first android device to lack an SD card slot of some sort, so bricking seems like a much worse possibility
The best guide ever is in the development section, it works for your device.
http://forum.xda-developers.com/showthread.php?t=1239185
follow the guide its very easy and worked fine for me
I Return triumphant, and gentlemen, i must say you were incorrect.
The I/O edition does not give you the option to access recovery at any point, even with the Pwr+VOL DN boot.
You can put it into download mode, and certianly use ODIN to install the recovery rom, but you will have no method to actually access recovery to push zip files.
thanks to some quick self education on using fastboot, i was able to root successfully.
To those of you in a similar situation who stumble upon this thread, i invite you to visit:
http://droidbasement.com/db-blog/?p=2439
There you can download CWM in a .img format for use with fastboot.
This link is where you can download fastboot:
http://forum.xda-developers.com/attachment.php?attachmentid=596615&d=1305443483
and you'll need to install PDANet for Android to get the fastboot drivers:
http://junefabrics.com/android/
I belive you'll also need ADB installed from the Android SDK. i do have it installed on this computer, but did not use the ADB command at any point, just fastboot.
Instructions:
1. Download fastboot, PDANet for android, and the recovery image. You'll also need "Samsung_Galaxy_Tab_10.1_root.zip" found in Root.zip from the retail version instructions.
2. Copy the "Samsung_Galaxy_Tab_10.1_root.zip" to the tablet, and and power it off. Disconnect the USB connection
3. Unzip fastboot zip into it's own folder, and then copy your recovery.img file into the same folder.
4. Start the install of PDANet. It will ask you if you want to install drivers about half way through. say yes, and select "Samsung" when the time comes. it will install some drivers and then ask you to try and connect. windows may flare up and say they're unsigned. accept anyway.
5. watch this friendly video on how to start fastboot on your tablet:
http://www.youtube.com/watch?v=sR7vE4IueaU
"fastboot!"
Basically the same as the steps outlined for the retail version, but you will go to the usb icon instead of the box.
6. once the tablet is in fastboot, connect the USB cable. PDA net will recognize it as an ADB connection and try and load itself. it will fail, that's fine. Let the installer exit completely.
7. Open a command line in windows, and get it to the directory fastboot.exe and your recovery image are in.
8. run your fastboot command. i only used it temporarlily, so my command was:
"fastboot boot recovery-cwm_5.0.2.7-sam-tab-10.1.img"
9. the tablet should now boot into the recovery image presented. hooray! follow the remaining instructions from the retail version root, using recovery to load the "Samsung_Galaxy_Tab_10.1_root.zip" and reboot.
10. Once you've done all that, select to reboot. The tablet will reboot. i took the opportunity to disconnect the cable.
11. "Superuser" should now be in your apps, and you're rooted!
Extra Step: Download "Rom Manager" by clockwork from the android market, and install it. from here, opt to flash recovery. Once that's complete, you can now access recovery by launching that program and simply hitting "Reboot into Recovery"
I have no use for this myself but it's not often someone comes back and posts a complete howto on solving their own initial issue. I wish more people would do this. Thanks button clicked.
I just ran into this exact problem and only found this thread after figuring it out on my own. I figured my IO tab just didn't like having clockwork mod installed, but it certainly booted it. I nearly ruined it by accidentally wiping my rom trying to get it to boot at all. I had to repush my install files to the insternal memory using adb after I was able to boot into recovery with fastboot.
I haven't looked around too much (seeing as I only JUST got the damn thing to boot a rom) but is there a fix to that, perhaps installing the retail bootloader?
I'd hate to have to use fastboot everytime my rom doesn't boot. I've gotten used to wiping and installing roms from wherever I am on my other android devices.
I'm not familiar enough with the device to be able to give you a definite answer, but i imagine adding a bootloader from the retail version would give you the recovery option instead of fastboot.
personally, i'm a little more fond of having fastboot around right now, as it's easy enough to get into recovery when flashing things with it, and the bootloader for the I/O is unlocked... i can think of a few fun things to do in the future if i can load any ROM i want into memory, test it, and move on if it's no good... i may even give some of the ICS dailies a try thanks to this.
Always several ways of doing things... glad you got it worked out.
http://forum.xda-developers.com/showpost.php?p=15735928&postcount=2
RootzFan,
that method is flashing an entirely new rom, down to 3.0, just to gain root access and open recovery so you can then return to 3.1.. it has the added byproduct of installing touchwiz.
IMHO, my way is a little cleaner as there is actually zero flashing needed, and you get to keep everything active and installed.
i recommend just going for custom roms - it comes already rooted - yBoot into recovery and flash a custom ROM
I have the IO tab myseldf and have been flawlessly running GalaxyTask custom ROM - http://forum.xda-developers.com/showthread.php?t=1340064
shane86 said:
I recently purchased a used Galaxy tab 10.1 I/O, and it had already received the 3.1 OTA update.
Now i want root access for various reasons, and can't seem to find a clear guide on how to do so.. I've found plenty about how to do so on the original 3.0 rom, and that it will carry through the 3.1 update, or for the regular version Galaxy Tab 10.1, but it's my understanding the ROMs were fairly different between the I/O and the retail version and that attempting to cross-pollinate root methods may not be a good idea
although I've rooted and ROMed my fair share of HTC devices and Nooks i'm a little more apprehensive with this unit, as it's my first android device to lack an SD card slot of some sort, so bricking seems like a much worse possibility
Click to expand...
Click to collapse
oh, def not the best method... just saying it is nice that there are alternatives.
self delete
Fun Stuff.
So, I have made a major boo boo when it comes to rooting devices and flashing custom ROMs; normally I am not a n00b when it comes to this, but I think I gone done something wrong this time. I have checked Diamondbacks thread as well as many other and have a whole slew of tools downloaded now and I cannot seem to get past the splash screen. ADB recognizes my device as well as Windows in Fastboot mode, just can't seem to figure out how to flash the stock ROM back on this device. I would be willing to donate money to the cause as this has cause me much undue frustration. If you are up and willing to the task, please PM me or even call my cell to walk me through this. Couldn't find XDA's chat, all I am asking is that someone have a heart and help a fellow techie out.
LivioDoubleFang said:
So, I have made a major boo boo when it comes to rooting devices and flashing custom ROMs; normally I am not a n00b when it comes to this, but I think I gone done something wrong this time. I have checked Diamondbacks thread as well as many other and have a whole slew of tools downloaded now and I cannot seem to get past the splash screen. ADB recognizes my device as well as Windows in Fastboot mode, just can't seem to figure out how to flash the stock ROM back on this device. I would be willing to donate money to the cause as this has cause me much undue frustration. If you are up and willing to the task, please PM me or even call my cell to walk me through this. Couldn't find XDA's chat, all I am asking is that someone have a heart and help a fellow techie out.
Click to expand...
Click to collapse
Not sure what recovery you have now but I suggest you go here >>
http://forum.xda-developers.com/showthread.php?t=1615990 and install twrp recovery through the fastboot method. Boot into trwp recovery. After that, download the nvflash files from here http://forum.xda-developers.com/showthread.php?t=1774352
Not saying you should use nvflash at this point but the file also contains a known good adb.exe file. Unzip the file and while in that directory press and hold the shift button while right clicking the mouse. This will bring up a menu select open command prompt here.
Put your rom into the same folder as the adb.exe then in the comand window type adb push /name of your rom.zip /sdcard/ if this doesn't work use /sdcard/media At this point you should be able to install the rom. As for the rom, a good starting point would be androwook rom since it seems to install quite easily (do not unzip). Also when you are performing commands in either fastboot or adb, it is best to copy (control c) from the webpage then in the command window right click and paste, this eliminates errors. Having the files you are flashing in the same directory of fastboot or adb eliminates the need to type pathways, this is where many people run into issues, 1 wrong letter make everything not work....
Thanks Gage_Hero, the TWRP tutorial was just what I needed in getting a custom ROM flashed to the device; however, my next question is, if I did not create a backup of the stock ROM like I should have, will I ever be able to get back to it should I need to update the OS or for any other reason? From what I have read, Asus stock ROMs have a unique ID to every device, making it virtually impossible to use someone else's backup for flashing. Much appreciated for any information you can provide.
LivioDoubleFang said:
Thanks Gage_Hero, the TWRP tutorial was just what I needed in getting a custom ROM flashed to the device; however, my next question is, if I did not create a backup of the stock ROM like I should have, will I ever be able to get back to it should I need to update the OS or for any other reason? From what I have read, Asus stock ROMs have a unique ID to every device, making it virtually impossible to use someone else's backup for flashing. Much appreciated for any information you can provide.
Click to expand...
Click to collapse
Most people don't have a stock backup since once you are unlocked, trying to install the ota update can make the tablet inoperable. So basically when Asus updates the software then the developers here pick up the stock rom and enhance it. This goes anywhere from the base stock rom with root up to taking the rom and customizing it with options, kernel changes and such. The only thing I will say about changing kernels is only use kernels that were developed for the particular rom or you will have trouble. Kind of like taking a Ford motor and trying to mate it to a chevy transmission.
If you do change roms, make sure you wipe cache, dalvik and do the factory reset from within twrp. When you become comfortable, I suggest looking at the NVflash thread in the dev section. This will provide you with a bit of assurance that you can recovery from most software brick situations. Read over the instructions a few times before you go a head and take some time to read through the thread so you know what could potentially go wrong. It really isn't that difficult to do but you should be well informaed before proceding. If you need anything else don't hesitate to ask
Another thing that i find helpful, keep a stock rom in your sdcard. When i semi-bricked my 201, i was able to flash the stock rom using CWM, then do a factory reset. Once back to factory, i was able to boot and start over again.
Hey folks,
First time poster here, but have been following this awesome community for a few months now. So with that being said, I've landed myself in deeper water then I had hoped to see on my first foray into the world of tinkering on my tablet. I feel I should also disclose my epic newb moment, where in I ran headlong off the cliff with making proper (any) backups
I've been doing a lot of reading the last couple days to try and solve the issue, found lots of radical advice, but sadly haven't managed to get myself any further ahead. I was hoping that with a little list of what the TF201 is doing & what I've tried since, that you folks might be able to shed some light on what I've done and what I can try.
The Problem:
I've got a TF201, unlocked, TWRP 2.6.3.0. ADB access from command prompt. Sadly that's all I've got at this time (No OS, No fastboot). I cannot seem to install an OS now, but can still push files over to the tablet/view them. As far as I can tell, I'm have Brick 1a from this post: http://forum.xda-developers.com/showthread.php?t=1514088 . It references (CWM), so Im not sure these steps are applicable (My understanding is this is a recovery manager though I could be mistaken).
I've also explored:
[TOOL][WINDOWS-ONLY]WSG UnBricker V1.0.2
http://forum.xda-developers.com/showthread.php?t=1599991
But don't have fastboot access.
Unrecoverable bootloader error but not Bricked!
http://forum.xda-developers.com/showthread.php?t=2179759
But don't have fastboot access.
[ROOT] Urkel's Fresh Start 1.0 (Jelly Bean - Unlocked bootloaders only)
http://forum.xda-developers.com/showthread.php?t=1929189
Again appears to need fastboot access.
Etc.
So my question is, is there a process I can follow from TWRP to get me back to fastboot access? OR am I looking at the problem from the wrong angle? Any advice or suggestions would be appreciated. Apoligies in advance if this is addressed elsewhere! If there is any additional info I can provide please let me know.
***Update***
Now have fastboot access, continuing to proceed with caution. Attempting to install a rom now.
***Update 2***
Still have fastboot access, however now can't access recovery when I fastboot devices my device now shows up as ??????????? Fastboot, rather then the letters/numbers it used to show. Feeling like I've slid her a little deeper into the mud. Also a lot of "unrecoverable boot error 0x00000000"
***Update 3***
http://forum.xda-developers.com/showthread.php?t=2179759&page=2 Progress
Light_Canuck said:
Hey folks,
First time poster here, but have been following this awesome community for a few months now. So with that being said, I've landed myself in deeper water then I had hoped to see on my first foray into the world of tinkering on my tablet. I feel I should also disclose my epic newb moment, where in I ran headlong off the cliff with making proper (any) backups
I've been doing a lot of reading the last couple days to try and solve the issue, found lots of radical advice, but sadly haven't managed to get myself any further ahead. I was hoping that with a little list of what the TF201 is doing & what I've tried since, that you folks might be able to shed some light on what I've done and what I can try.
The Problem:
I've got a TF201, unlocked, TWRP 2.6.3.0. ADB access from command prompt. Sadly that's all I've got at this time (No OS, No fastboot). I cannot seem to install an OS now, but can still push files over to the tablet/view them. As far as I can tell, I'm have Brick 1a from this post: http://forum.xda-developers.com/showthread.php?t=1514088 . It references (CWM), so Im not sure these steps are applicable (My understanding is this is a recovery manager though I could be mistaken).
I've also explored:
[TOOL][WINDOWS-ONLY]WSG UnBricker V1.0.2
http://forum.xda-developers.com/showthread.php?t=1599991
But don't have fastboot access.
Unrecoverable bootloader error but not Bricked!
http://forum.xda-developers.com/showthread.php?t=2179759
But don't have fastboot access.
[ROOT] Urkel's Fresh Start 1.0 (Jelly Bean - Unlocked bootloaders only)
http://forum.xda-developers.com/showthread.php?t=1929189
Again appears to need fastboot access.
Etc.
So my question is, is there a process I can follow from TWRP to get me back to fastboot access? OR am I looking at the problem from the wrong angle? Any advice or suggestions would be appreciated. Apoligies in advance if this is addressed elsewhere! If there is any additional info I can provide please let me know.
***Update***
Now have fastboot access, continuing to proceed with caution. Attempting to install a rom now.
***Update 2***
Still have fastboot access, however now can't access recovery when I fastboot devices my device now shows up as ??????????? Fastboot, rather then the letters/numbers it used to show. Feeling like I've slid her a little deeper into the mud. Also a lot of "unrecoverable boot error 0x00000000"
Click to expand...
Click to collapse
Get yourself back into fastboot. I'm guessing you got there by typing adb reboot fastboot from in TWRP.
You will need to make sure your fastboot and adb exes are compatible so try these. http://flumpster.lolcakes.com/android/adb-fastboot.zip
I know they are old but I also know they worked.
Next you would have to make sure you had the correct drivers installed. I've always used these. http://www.koushikdutta.com/post/universal-adb-driver
Now follow the instructions here http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
But where he says to get the TF300 firmware etc get the TF201 instead.
EDIT : Are you also sure you are in fastboot and not in APX mode. Explain how you got to fastboot please.
Thanks for the reply flumpster, I was actually working my way through that when you posted. So now I can get into fastboot, however I have no OS installed currently. I'll keep poking at it, I feel progress is being made
EDIT
I am powering down and holding volume down. I may have a terminology issue here, but that is what I believed was fastboot.
EDIT 2
Also confirmed adb and fastboot are working, and confirmed Im using the same driver you recomended. I am now sitting with 4 options, RCK, Android, USB & Wipe Data.
With much fandangling, have got myself back to a bootable environment running the rom located here: http://forum.xda-developers.com/showthread.php?t=2147895
From what I gather I should get my backups made asap, NVflash seems to be the most commonly mentioned, but am getting an error with step 1 in wheelies. However, its another issue so I shall consider this thread case closed and go back to reading. Thanks again for the help!
Hi all,
I have been through douzens of threads and forums looking for a solution to this.
I followed some instructions to modify the build.prop file on my Huawei G535-L11 to disable Huawei theme manager in order to get Xsposed working fully (changed ro.config.hwtheme: 0). I did a backup of my original build.prop before hand, and my phone was rooted and unlocked but running the stock rom.
Unfortunately, it rebooted but won't go past the first 'EE' splash screen (just turns off again).
I can inconsistently get in to both fastboot and Android recovery, so I have been trying to use adb to push the original build.prop to /system/ on the phone.
However, this fails as /system/ is apparently RO. I have now discovered that I can't get SU permissions despite my phone being rooted.
If I try:
adb shell
$ su
nothing happens and it goes back to a $ prompt.
If I try:
adb root
I get the message (paraphrased):
adb cannot run as root in production builds.
So I can't push or do any adb method of restoring the build.prop file?! I don't understand why it is acting as if it is not rooted. I had Link2sd, Gravity Box, No Frills Cpu Controller all set up and working before, so I'm fairly sure I did truly have root.
I have also tried flashing a TWRP recovery, which apparently is successful, but when I go in to recovery it is still the Android Recovery.
Does anyone have any ideas what I could do to get my phone working again please?! This is my last gasp before the phone gets filed under 'B' in the cylindrical cabinet in the corner of the room!
Any assistance greatly appreciated!
Some systems are very finicky with modded build.props, or you didn't set the file's permissions correctly. I'm afraid without being able to boot or a working custom recovery, then adb won't work, much less root enabled adb functions. adb works in some stock recoveries, but only for sideloading files directly signed by the manufacturer. In regards to TWRP, is the bootloader unlocked? If not, that would explain why it didn't work. Other than that, I don't believe you'll have any other options besides reloading the stock firmware.
Hi,
Thanks for the reply. Yes, the bootloader was / is unlocked.
Unfortunately, there isn't any stock firmware available anywhere. Unless someone out there has a backed up rom image from the EE Kestrel?
This is supposed to be a working TWRP for your device http://forum.xda-developers.com/showpost.php?p=58522448&postcount=117 - if you get it loaded, there might be a chance to push the working build.prop back to the phone. I would read that thread too and see if there isn't more useful info there or another member with your phone that could make a backup for you. Good luck.
Thanks.
Unfortunately, I'm pretty sure that is the TWRP I've tried. I'll double check when I'm on my PC.
I might try requesting a rom image on that thread, but the community for this phone seems to be pretty dead :/
I've just gone and ordered a new phone anyway, but it seems like a waste of a good phone just for the sake of one line of bad code!
Thanks for your help. I'll post again if I have any success.