Related
UPDATE 08-20-11.Ok Guys, I have been getting quite a few PMs and replies to the post regarding the New (OTA) software update. Rather than replying to every post or PM Here is the Answer...
If you have updated your phone using the Offical OTA with the latest Hboot 1.50 Then you CANNOT Root your phone using the Revolutionary method. The Revolutionary Tool only supports 1.30 and 1.40 Hboot for NOW.
In short if you Update your phone in Excitment or without thinking you are SOL for NOW...
Update 08-17-11 As Pointed out by a few users there is an update to the revolutionary Tool it's now 0.4Pre4, I have updated the revolutionary Zip found in the link provided to include this new update...
First and foremost many thanks to Unrevoked,AlphaRev,TeamWin and all the other devs that have made this possible. Endless RESPECT & LOVE to the Devs...
Now on to the fun and EASY stuff. There are a lot of guide on how to final permanently root your Evo 3D. This to me is just another method and hopefully others who are having issues with doing the process will find this easy as 123... It may look like a lot of reading but it's very simple and detailed.
Hope This will help those who have been frustrated with other methods/guide
I have tired both ADB and this method to obtain S-Off and then custom recovery... I have also included all the files needed in 1 link to complete this steps.
***Link***http://www.mediafire.com/file/5w6hovty8y79wey/EVO 3D All Files Update 08-17-11.zip
AFTER DOWNLOADING ALL FILES PLEASE EXTRACT JUST THE REVOLUTIONARY FOLDER. PLACE THE OTHER THREE ZIP FILES AS IS ON THE ROOT OF YOUR SD CARD (PG86IMG_eng-hboot, su-2.3.6.3-efgh-fixed-unsigned AND TWR). tHE htc DRIVERS IS OPTONAL, IF YOU HAVE THE DRIVERS INSTALL THEN YOU CAN DELETE IT.
Prerequisite
STEP 1: S-Off & ClockWork Mod Recovery (CMR)
1. There are 4 zip files in the folder from the link provided, the ONLY 1 you should extract is the revolutionary folder. The other three files should remain as zip files and should be on the root of your SD card...
2. Make sure you have ADB enable on your device (Menu--Settings--Applications--Development-- USB Debugging).
3. Connect your phone to your PC, select charge only. If you do not have the HTC drivers installed then you show find the exe in the revolutionary folder. Run the .exe to install the HTC android phone usb device. To verify if the device has been install right click (My computer) or (computer) ---Manage-- Device Manager--Double click Disk drives. Your phone should be listed a usb device.
Once this is done4. Open up the revolutionary folder, you should copy/extract all the files by now. Run revolutionary.exe. You will now need to go to http://revolutionary.io/ to get your Beta key. Just click on download (u already have the file) so you don't have to save it. Enter your Hboot version and serial number, generate your key. Enter your key exactly as shown...
5.If you have successfully enter your key the S-off Process will begin. You will be prompted to download Clockwork Mod Recovery (CMR). hit Y and enter to install CMR... Your Phone should reboot and once you are on your home screen you should have S-Off... End of Step 1...
Ok now that you have obtain S-off it's Time for Team Win custom recovery Project (TWRP) + Eng H-boot. I would recommend you check to see if you have clockwork mod recovery before you continue. Power down your phone. REMOVE the battery, put it back in. Hold your hand on the volume down button while pressing the power button. release the power button after a few secs while still holding the volume down button. Your phone should boot to Hboot/bootloader menu. You should see S-off on the top. Now press volume down to select recovery and press the power button to boot into recovery. Your phone should boot into clockwork mod recovery. Make a nandroid backup of your system if you like. Now install "Super user fixed" seeing that you are already in recovery.
Go back to the clockwork mod recovery main menu if you did a back up, if not select install zip... look for su-2.3.6.3-efgh-fixed-unsigned and install/flash. reboot your phone. You can open your App draw to see if you have super user install Just for fun...
You are almost home...
STEP 2. Flash Eng Hboot, Team WIN recovery
1. Connect your phone to your computer and select disk drive, go to your SD card and look for PG86IMG_eng-hboot RENAME it to PG86IMG. If you do not have it on your SD card then copy/move it to the root of your SD card.
2. Remove your phone from the computer and power of your phone. Remove the battery and put it back in. Reboot into recovery (hold vol down + power button for a few secs). Your phone should boot to the bootloader and it should pick up the PG86IMG which is your eng-hboot.
3. Press the Vol up button for yes to flash the PG86IMG. Reboot your phone when done. You have now install your eng-hboot without ADB...
4. Connect your phone to your computer and select disk drive, go to your SD card and REMOVE or REMAIN the PG86IMG. I would recommend you just remove it. Make sure you have the zip folder TWR on your SD card. If not now is a good time to do so. Once this is done remove the phone from the computer and power down your phone. Remove the battery and then back in.
5. Boot into recovery once more (should be a semi pro by now ) Remember vol down and power for a few secs.
6. Go to recovery (vol down) then press power to select. Your phone should boot into clockwork mod recovery. Select install zip... look for TWR and flash/install it. Once down reboot your phone You have successfully install a custom recovery(Team WIN Recovery) AGAIN no ADB or fastboot... You can download quickboot from the market and boot into reocvery which should take u to Team WIN Recovery Project...
7. WE ARE ALL DONE, if you have follow these steps correctly....
***Link Again***http://www.mediafire.com/file/5w6hovty8y79wey/EVO 3D All Files Update 08-17-11.zip
Update 08-17-11 Alternate Method Greetings All,
Did not want to start a new Thread so am Adding an Alternate method for those of you who have been asking if you can Flash TWR and the Eng H-boot Via the Bootloader. The step above was a step by step guide for beginners. Here is the Alternate method for standard & advance users.
If you do not want to Flash the two Zips (Eng hboot, TWR) via recovery then do this:
Steps
1. Obtain S-Off via revolutionary (it is up to you if you want to flash CWR , works both ways...) Reboot... Once Done...
2. Connect your phone to your computer and select disk drive, go to your SD card and look for PG86IMG_eng-hboot RENAME it to PG86IMG
3.Boot into recovery, it should automatically pick up the PG86IMG and ask if you would like to update. Select Yes and once done reboot your phone.
4.Connect your phone to your computer and select disk drive, go to your SD card and REMOVE or REMAIN the PG86IMG. I would recommend you just remove it.
5. Now you will need to rename the TWR to PG86IMG, disconnect your phone from the PC once done.
6. Boot into recovery, it should automatically pick up the PG86IMG and ask if you would like to update. Select Yes and once done reboot your phone.
7. Important: You would need to go to recovery 1 final time to flash the Super User (su-2.3.6.3-efgh-fixed-unsigned).
ALL DONE ,yet another simple way to Root Your HTC EVO3D
JahNile
Evo 3D
Finally now With S-Off + Eng Hboot+ TWRP
Would it be possible to use your Eng Hboot without ClockWork Mod? I accidently hit no instead of yes, I can't figure out why ADB is not working.
You may be able to flash the eng hboot seeing that you now have S off. However you may not be able to flash superuser (SU) and TWR. This requires a custom recovery I believe. You can approach this a few ways. You can try to push the TWR via fastboot /adb then SU. You can also go back to S-On then start from the beginning again.
Both methods can be found in the forum. Good luck.
Sent from my PG86100 using Tapatalk
is this the same ENG Hboot version that was posted in another thread.
Yes all files are from the forum no changes. Just place them into 1 folder rather than post links to them... Try to make it as simple as possible 4 every 1.
Sent from my PG86100 using Tapatalk
Pretty good guide just a few comments that may prevent confusion.... A couple times you say reboot to recovery via power and volume but your are actually booting to bootloader then letting it find a .img or selecting recovery from the menu. I think that's what you were trying to say but like I said trying to prevent confusion. Also I'm almost 100% positive a back up made I'm CWM won't work with TWRP. Otherwise great job I'm sure there will be many people that will appreciate this guide and not having to use fastboot or adb.
Edit: changed a few things in my post... It's late and my brain is toast. Also you can hold off on installing CWM and just install TWRP from the bootloader after renaming it just like the hboot.
Sent from my PG86100 using XDA Premium App
Correct you can install TWR that way as well and def.ly u can reboot to the bootloader instead. Just wanted to be a little detailed. Tx 4 the editing.
If you want to install TWR VIA the bootloader you would need to rename the TWR zip to PG86IMG...
Btw u can flash TWR via clockwork. You r only flashing a zip file so it does work.
Sent from my PG86100 using Tapatalk
This guide looks a little easier.
Sent from my EVO3D
hey guys what are the advantages of the eng hboot for are phones other than the 1.30 and the 1.40?
Do you run into the problem with the error for not being able make calls receiev texts..etc?
Yes forgot to mention this. That happen to a few users who have rooted their evo 3D. Just call sprint and they will reset your profile no questions ask. Just tell them no voice services. Its actually a 5 mins or less call. Think its their new fraud protection system kicking in.
u should be up and running in no time easy. They gonna back you remove the battery then put it back In while they update your profile. Then they will have you place a test call and then the Rep will call u to confirm you can recv calls also.
Sent from my PG86100 using Tapatalk
If am not mistake for the most part The ENG hboot is what unlocks NAND protection. Without the NAND unlock, we wouldn't be able to flash ROMs or have custom recovery. Hope this helps.
Sent from my PG86100 using Tapatalk
Looks promising... Will try after work
Sent from my 3VO3D.
jahnile said:
If am not mistake for the most part The ENG hboot is what unlocks NAND protection. Without the NAND unlock, we wouldn't be able to flash ROMs or have custom recovery. Hope this helps.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
The ENG HBOOT gives you access to more fastboot commands. For the average user you will not notice the difference. The only time you may need it is if you soft brick your phone... the extra fastboot commands can help you recover. Bottom line is better have it to be safe cause there are no negative side effects.
thanks
Nice guide appreciate the time you took to put this together..
Will try after work..
Anyone try this and worked out?
Sent from my PG86100 using XDA App
jahnile said:
Yes forgot to mention this. That happen to a few users who have rooted their evo 3D. Just call sprint and they will reset your profile no questions ask. Just tell them no voice services. Its actually a 5 mins or less call. Think its their new fraud protection system kicking in.
u should be up and running in no time easy. They gonna back you remove the battery then put it back In while they update your profile. Then they will have you place a test call and then the Rep will call u to confirm you can recv calls also.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
All you gotta do is use the chat and tell them you cant text or call.
Does the wireless tethering work?
Sent from my PG86100 using Tapatalk
Once your are rooted any wireless tethering app should work. The wifi tether from Google on the market works. There are also some custom stock rom that includes the wifi tether app along with a working version of the sprint hotspot app.
Great guide..just a couple updates: CWM wouldn't download - failed all 3 times. But the way around it was turning the Hboot-ENG into a PG86IMG and went through the bootloader..did the same for TWP. Once in TWP i did the zip for SU.
Other than then, worked out great.
Beta key = cut and past simplest lol.
I am a complete noob. Sprint Evo 3d 1.5 s-on, I have been running Viper IC3D for a month now, loving it,should have stuck with that. I wanted to try one of the Jelly Bean Roms, specifically the Team D.I.R.T. one, but I didn't want to have to keep flashing the two roms back and forth. Found out about Boot Manager Pro on here, and found a thread about using it with hboot 1.5 s-on. followed the instructions, booted into D.I.R.T. rom. fiddled with it, decided to go back to my phone rom. Boot Manager kept unexpectedly closing on me, wouldn't stay open long enough to do anything. So I went into recovery and restored my nandroid of Viper. But D.I.R.T. loaded! Said screw it, and wiped and reflashed Viper. D.I.R.T. loaded! Couldn't get anything but that ROM to load no matter what I did. Uninstalled Boot Manager, nothing but D.I.R.T.So I hunted around here and found a thread that said if all else failed, to manually remove Bootloader from sd and go from there. Did that, and it soft bricked my phone. I can get into recovery, but no matter what I do when I reboot it hangs in HTC white boot screen. I cannot afford another phone and don't get an upgrade til next year. Please Say there is a solution to this! I cried all last night, couldn't sleep, and I'm crying again. Side note, i accidentally erased half the C; Drive on my laptop trying things I found on another android forum,and system restore didn't work. So I'm back here, and I'm scared to try anything else, but I have to do something. Help!!!!!!
Flash the kernel. All will be well.
Viper rom should include boot.img.
Extract it to sdk-tools folder.
Open terminal, cd to sdk-tools directory.
Hold volume plus down on phone. Hit power button on fastboot option.
Plug in phone to computer. It should say fastboot usb on phone screen now. If not, install htc drivers.
Go to terminal. Type "fastboot flash boot boot.img
Should see some stuff happen on computer screen, phone will reboot.
Do that then report back.
Sent from my PG86100 using Tapatalk 2
can I do this using my rootevo3dnew package? I had a bad experience trying to install android sdk
You don't install sdk-tools. It's just a bunch if exe's in a folder.
That other thing you said, never heard of it.
Sent from my PG86100 using Tapatalk 2
Marta9227 said:
can I do this using my rootevo3dnew package? I had a bad experience trying to install android sdk
Click to expand...
Click to collapse
Yes you can, as long as you have fastboot and adb in there you'll be good, just put the boot.img in the same folder
Sent from my EVO 3DMA with a little "Common Sense"
please read my post carefully again and again it will solve your problem, I had the same problem
http://forum.xda-developers.com/showthread.php?t=1853065
I'm doomed. I was able to flash CWM this way, although it didn't help me at all. But I tried to flash the boot img and it didn't work. Didn't seem to recognize the command.
I'm cdma s-on? So basically you relocked and flashed an RUU and then relocked?
try to relock and flash with RUU it will work
At first when you were unable to boot back to phone rom, you should have went into recovery and flash the update.zip located in the sdcard/bootmanager/phonerom.
Anyway try to flash back to viperrom again then boot your recovery via fast boot since you are not s-off. And flash the update.zip from the phone rom folder. If everything fails just relock your bootloader and use the ruu.exe and you should be fine.
Marta9227 said:
I'm doomed. I was able to flash CWM this way, although it didn't help me at all. But I tried to flash the boot img and it didn't work. Didn't seem to recognize the command.
Click to expand...
Click to collapse
The command is: fastboot flash boot c:\(navigate to the sdk map with boot.img)\boot.img
For instance. for me it's c:\Users\(my name)\boot.img
Because i have my sdk and boot.img in my User map.
I believe boot manager creates the files for the second rom on the sd card. maybe thats why the D.I.R.T rom is loading.. My advice, try a different sdcard and see if the viper rom starts (you still might have to flash the boot.img via adb because of s-on)
I have no idea where the files for second rom are created so maybe if someone else could help out here. Then it should be a simple matter of deleting the second rom from the sd card and then go ahead and flash your viper rom.
http://init2winitapps.com/stories/BMManual.html
^^ this tell you all you need to know about dual booting.
Thanks to everyone! Relocked and ran RUU safely back to stock now debating if I have the guts to unlock again lol
Sent from my PG86100 using xda app-developers app
Do it!
Do it! The RUU will save you anyways lol
Should I do the stock ics ota first? I know that will make me hboot 1.58. Can I still HTC dev unlock 1.58? And can I get a new code? Didn't save the old one
Sent from my PG86100 using xda app-developers app
Yes you will have to get new code from htcdev. Though i wouldn't recommend updating hboot cause its known to cause some issues with some roms
im new to this whole rooting thing so please help a noob out.
So i unlocked the bootloader but unfortunately i tried to flash a rom while S-On; So now im stuck on the HTC screen. I tried to do the PH85IMG.zip thing but it doesnt seem to do anything. I would really appreciate any help guys (it sucks using a flip phone for over a week.)
the amaze is the tmobile version
I'm no pro but I have rooted and done all things root to 3 amazes. So you unlocked the bootloader. Did you flash a custom recovery? After that you should have perma rooted the phone by flashing the su.zip thingy. After that you should have preformed a backup. Then flashed the Rom. Take. The boot.IMG from the unpacked Rom placing it in the tools folder in androidsdk then flashing it in fastboot. This is how I do it. Always worked for me. In detail what did you do?
Edit. I also have s-on. Both on my girls amaze and my one s. I'm not sure if some roms require s off but I never had a problem flashing roms. Kernels are always easy using fastboot method.
Sent from my VLE_U using xda app-developers app
ventus17 said:
im new to this whole rooting thing so please help a noob out.
So i unlocked the bootloader but unfortunately i tried to flash a rom while S-On; So now im stuck on the HTC screen. I tried to do the PH85IMG.zip thing but it doesnt seem to do anything. I would really appreciate any help guys (it sucks using a flip phone for over a week.)
the amaze is the tmobile version
Click to expand...
Click to collapse
the order of what you just described doing some how seems entirely wrong... let me make a few corrections to what you should do
if you haven't flashed a custom recovery place your phone into bootloader mode (by removing the battery then reinserting and holding vol down + power button)
then enter FASTboot (by using the power button in the bootloader)... use hasoon2000's toolkit found Here in the second post (don't forget to hit thanks to his post)
flash 4EXT recovery, once in 4EXT check to make sure smart flash is enabled
once in 4ext recovery do a wipe DATA/FACTORY, followed by formatting SYSTEM then wipeing CACHE then DALVIK CACHE
after doing that proceed to trying to flash your rom again, if it fails download another ROM and use the MOUNT USB feature in 4EXT to mount your phone to the pc while in recovery and place another rom on your SD card to try and flash
overall the steps to flashing a rom on a "NEW" phone is Unlock Bootloader > Flash Custom Recovery > Flash SU for ROOT > BACKUP!! > Full WIPE > Flash ROM > BACKUP! if you require more info feel free to make another post
hope this helps
ventus17 said:
im new to this whole rooting thing so please help a noob out.
So i unlocked the bootloader but unfortunately i tried to flash a rom while S-On; So now im stuck on the HTC screen. I tried to do the PH85IMG.zip thing but it doesnt seem to do anything. I would really appreciate any help guys (it sucks using a flip phone for over a week.)
the amaze is the tmobile version
Click to expand...
Click to collapse
I dont know if u have fixed it but if you havent i sudget you search for this file "Stocked_Amaze_Deodexed.zip" and flash it as if you were flashing
a custom rom... this is stock ics From tmobile and its the only stock flashable zip that works with any recoverymod...
i would give u the link but i forgot what was the name of it and dont have it on my history but im sure you can find it with the name i gave you
ventus17 said:
im new to this whole rooting thing so please help a noob out.
So i unlocked the bootloader but unfortunately i tried to flash a rom while S-On; So now im stuck on the HTC screen. I tried to do the PH85IMG.zip thing but it doesnt seem to do anything. I would really appreciate any help guys (it sucks using a flip phone for over a week.)
the amaze is the tmobile version
Click to expand...
Click to collapse
Which RUU did you use? Personally, I'd suggest using THIS RUU.
Before using this RUU, make sure your battery is FULLY charged, and then make sure you have re-locked your bootloader. After that, rename the RUU to PH85IMG (usually the .zip part is already appended to the end, so if you add the .zip part, it'd actually be PH85IMG.zip.zip, which won't work)
Then add it to the root of your SDCard, boot into bootloader by taking out your phone's battery, putting it back in, then holding volume down button and power button. Keep holding those 2 buttons until the bootloader screen comes up. It will auto-detect the RUU and go from there.
After all's said and done, unlock your bootloader again, install a custom recovery - I recommend the 4EXT recovery - and then flash your ROM of choice.
Best of luck!
Hi,
I am new here and this is my first post so forgive me if starting a new thread for this topic was wrong but I found my own situation slightly different from the others here who had the same problem.
I have a gsm unlocked rezound and was trying to get rid of the unknown sim error message at lock screen. I followed the steps mentioned on this thread --> http://forum.xda-developers.com/showthread.php?t=1882355. I rooted the phone, downloaded the apk. Deleted the .odex file and replaced the existing apk with the downloaded one and rebooted. Now, I am stuck at the lock screen with no icons. But for the other people who faced similiar issue, they were able to open the home screen. I can't. I can see pop ups for sms/mail. I get ring when a call comes in but I cant pick. I tried hard reset. Tried booting without sim/sd card. Still no luck. I tried connecting the phone to my pc but now my pc wont recognise the phone when its connected. I can see icon on top of the phone which says USB connected and I also see sync icon, but it will not go any further. I dont know how to get into the phone's menu now.
I may have bitten more than I can chew, silly me :crying:
If you guys can help me in any way, I would appreciate that a lot.
OS : 4.0.3 ICS Running HTC Sense 3.6.
A quick fix:
http://forum.xda-developers.com/showthread.php?t=2017932
Flash my debloater, choosing the Sense option(will be brought to a widget removal screen if you don' use them all) & AOSP lockscreen. Disadvantage to that though, you will have to unlock to see the caller id when it rings.
Snuzzo said:
A quick fix:
http://forum.xda-developers.com/showthread.php?t=2017932
Flash my debloater, choosing the Sense option(will be brought to a widget removal screen if you don' use them all) & AOSP lockscreen. Disadvantage to that though, you will have to unlock to see the caller id when it rings.
Click to expand...
Click to collapse
Thank you for the quick response. I have downloaded the file. I know this sounds stupid but I am a real rookie. I don't know how to do the flashing or how to get to the AOSP lock screen. If you could guide me through the process or maybe give me a link where I can learn it myself, it would be great.
Essentially since you already have rooted, you will(should) also have a custom recovery (TWRP, AmonRa, CWM). Install it as you would a regular rom but without any wipes until after flash of the zip. Dependent on which recovery you will want to look up their FAQ/QnA on how to wipe dalvik/cache.
Once you get inside the script, you will see what I meant by "Choose Sense & AOSP Lockscreen".
Snuzzo said:
Essentially since you already have rooted, you will(should) also have a custom recovery (TWRP, AmonRa, CWM). Install it as you would a regular rom but without any wipes until after flash of the zip. Dependent on which recovery you will want to look up their FAQ/QnA on how to wipe dalvik/cache.
Once you get inside the script, you will see what I meant by "Choose Sense & AOSP Lockscreen".
Click to expand...
Click to collapse
Yes the phone was rooted, but I used a rooting software from google apps from the phone. After I downloaded that app, it rooted the phone and brought in an extra icon. I remember it as SU root something, but I didnt do it from the pc. So I dont have any recovery on the pc. I used to sync the phone with htc sync. Unfortunately, right now, my pc wont recognise the phone. I tried root explorer for android from pc, it wont recognise the device. HTC sync too will not. But my phone seems to know when a USB is connected, it brings the usb icon on top but thats about it. ((
Ok, best suggestion at this point is to follow the instruction in the OP for installing TWRP in the Rezound development section.
Snuzzo said:
Ok, best suggestion at this point is to follow the instruction in the OP for installing TWRP in the Rezound development section.
Click to expand...
Click to collapse
Could you kindly provide me a link to the right topic. Do you think my phone is beyond repair ? Have I bricked it ?
I am running 4.0.3 ICS on Sense 3.6
http://forum.xda-developers.com/showthread.php?t=1902381
You are far FAR from being bricked. Softbricked yes, hardbricked no.
Snuzzo said:
http://forum.xda-developers.com/showthread.php?t=1902381
You are far FAR from being bricked. Softbricked yes, hardbricked no.
Click to expand...
Click to collapse
Thank you for the help buddy. I am glad you said its not. I dont know what I would have done if it had. This is my first android phone and I took it a week back. I was beginning to miss my iPhone . Unfortunately the link you provided wont help me because I have no way of restarting phone other than by removing battery. Even when in fastboot, the pc does not recognise the device even when device shows fastboot usb. I doubt if I can get past step 1 in that link.
I found that I am on Vigor H Boot 2.27.000 and Radio 2.22.10.0803r with S-ON. I tried to turn S-Off after reading and educating myself on android from this forum till now. But even to S-Off, I need to be able to enable USB in debug mode which I am not able to. Any suggestions ?
Device still not fixed
hi,
I took the phone to a couple of places to check if it can be fixed, No one was able to fix it thus far, Any other advice or suggestions to fix this would be great. Any admins/mods have something to add ? Please, I am desperate to fix this phone. Anyway of doing this ?
Have you tried flashing a different rom?
If he's S-on and locked, he can simply flash the latest RUU can't he(just to get the phone working again). From there someone can help him set up adb, and s-off.
Sent from my ADR6425LVW using xda app-developers app
From what they posted, somehow they don't have a custom recovery even though they are rooted?
Can you put a PH98IMG.zip file of a recovery (either Amon Ra or TWRP) on your SD card and flash it in hboot? Then flash a custom ROM the same way from recovery.
You can take the SD card out and mount it on your pc and use your pc to copy over the recovery PH98IMG.zip file.
And oh yeah, I see what Obaterista... was saying. You should be able to flash the latest RUU from hboot. Here's a link for it:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
That's global too, which seems to be what you'll need.
jon7701 said:
Have you tried flashing a different rom?
Click to expand...
Click to collapse
Yes I have vigor, tried AmonRa, that did not work mate. It starts fastboot, gets stuck @ unpacking PH98IMG.diag and then nothing happens.
Obaterista93 said:
If he's S-on and locked, he can simply flash the latest RUU can't he(just to get the phone working again). From there someone can help him set up adb, and s-off.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
The bootloader screen says S-On. On top it says ***Tampered*** and below it ***UNLOCKED***.
feralicious said:
From what they posted, somehow they don't have a custom recovery even though they are rooted?
Can you put a PH98IMG.zip file of a recovery (either Amon Ra or TWRP) on your SD card and flash it in hboot? Then flash a custom ROM the same way from recovery.
You can take the SD card out and mount it on your pc and use your pc to copy over the recovery PH98IMG.zip file.
And oh yeah, I see what Obaterista... was saying. You should be able to flash the latest RUU from hboot. Here's a link for it:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
That's global too, which seems to be what you'll need.
Click to expand...
Click to collapse
Yes I rooted from a tool I found on android market. Noob me. So I do not have a recovery. I had downloaded the PH98IMG.zip and put it in my sd card and tried. The recovery starts and then shows a red exclamation and then nothing happens.
I was just trying different pages for help. Someone has mentioned that I should add the PH98IMG.zip as just PH98IMG and I shud not add the .zip. Thats the only thing left to try. I will post what happens when I do that.
lllR2-D2lll said:
Yes I have vigor, tried AmonRa, that did not work mate. It starts fastboot, gets stuck @ unpacking PH98IMG.diag and then nothing happens.
The bootloader screen says S-On. On top it says ***Tampered*** and below it ***UNLOCKED***.
Yes I rooted from a tool I found on android market. Noob me. So I do not have a recovery. I had downloaded the PH98IMG.zip and put it in my sd card and tried. The recovery starts and then shows a red exclamation and then nothing happens.
I was just trying different pages for help. Someone has mentioned that I should add the PH98IMG.zip as just PH98IMG and I shud not add the .zip. Thats the only thing left to try. I will post what happens when I do that.
Click to expand...
Click to collapse
What you'll have to do is relock your boot loader, flash the RUU and then unlock again. From there you should be able to flash a recovery and flash a rom.
Sent from my ADR6425LVW using xda app-developers app
My phone is also soft bricked. I relocked the phone and now it just sits in hboot and won't do anything no matter if I yet to flash the ruu zip file or use the exe ruu.
Currently
Relocked
Hboot 2.10.0000
Believe I am 4.03.605.2 main version, at least that's what the exe file said.
I'm pulling my hair out just trying to any software installed. Help please!
Sent from my SCH-I535 using xda app-developers app
1967ls2 said:
My phone is also soft bricked. I relocked the phone and now it just sits in hboot and won't do anything no matter if I yet to flash the ruu zip file or use the exe ruu.
Currently
Relocked
Hboot 2.10.0000
Believe I am 4.03.605.2 main version, at least that's what the exe file said.
I'm pulling my hair out just trying to any software installed. Help please!
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Are you trying with the stock ROM ? If ure saving stock ROM as PH98IMG.zip, then try PH98IMG without the .zip typed in.
Obaterista93 said:
What you'll have to do is relock your boot loader, flash the RUU and then unlock again. From there you should be able to flash a recovery and flash a rom.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Thanks a tonne. That helped. I am back in the menu now. I am so grateful for ure help. But my problems dont seem to end just yet. Now, my htc sync wont detect the phone. The phone is relocked. I will try unlocking and see if it works, but is that the cause ?
lllR2-D2lll said:
Are you trying with the stock ROM ? If ure saving stock ROM as PH98IMG.zip, then try PH98IMG without the .zip typed in.
Click to expand...
Click to collapse
I'm trying to install any Rom. I find can of it is ics or gb. Nothing will load.
Sent from my SCH-I535 using xda app-developers app
1967ls2 said:
I'm trying to install any Rom. I find can of it is ics or gb. Nothing will load.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I am no expert to give u any suggestions but maybe if you could explain how it got bricked in the first place, someone might be able to give u a better solution mate.
Cannot install custom ROM through adb fastboot.
Cannot root since
display doesnt show hboot or recovery
Click to expand...
Click to collapse
.
Can I not flash a stock RUU that is rooted via adb then have root?
Point me to that RUU? Ive looked everywhere.
I am so frustrated I will pay for this help.
Sent from my HTC_Amaze_4G using xda app-developers app
Use this tool. http://forum.xda-developers.com/showthread.php?t=1493905
Has always worked for me and much easier than anything I've found.
Hanszoo said:
Use this tool. http://forum.xda-developers.com/showthread.php?t=1493905
Has always worked for me and much easier than anything I've found.
Click to expand...
Click to collapse
I am not trying to be rude but I have wasted a LOT OF TIME with replies like this.
I have been using that toolkit for 6 months.
I CANNOT SEE HBOOT OR RECOVERY AND I NEED TO BE ABLE TO USE ADB TO ROOT THIS PHONE WITHOUT HAVING TO GET INTO RECOVERY.
THE TOOL IS AWESOME BUT YOU HAVE TO BE ABLE TO ACTUALLY SEE THE RECOVERY ON THE SCREEN TO GET ROOT WITH IT!
Thank you
jtkknj said:
I am not trying to be rude but I have wasted a LOT OF TIME with replies like this.
I have been using that toolkit for 6 months.
I CANNOT SEE HBOOT OR RECOVERY AND I NEED TO BE ABLE TO USE ADB TO ROOT THIS PHONE WITHOUT HAVING TO GET INTO RECOVERY.
THE TOOL IS AWESOME BUT YOU HAVE TO BE ABLE TO ACTUALLY SEE THE RECOVERY ON THE SCREEN TO GET ROOT WITH IT!
Thank you
Click to expand...
Click to collapse
Maybe your not asking the question correctly. You say you can't see hboot or recovery. Are you trying to get the phone into bootloader? If so pull your battery put backin then hold volume down and power button. This will load into bootloader. If your just attempting to get the phone rooted then yes the tool I posted will root the phone. If your wanting to be able to change some of the permissions then you will need to install superuser. Hopefully this helps. If not maybe someone else can figure out what you are wanting to do......
I cannot see HBOOT or Recovery.
My display is not working correctly for some reason. I have flashed the stock RUU and unlocked the bootloader via the toolkit.
Now I am stuck because I cannot see the recovery screen to actually install the superuser.zip that the toolkit put onto my sdcard.
Do you see what I am saying here?
If I could simply see my HBOOT and recovery screens I would have this phone rooted in 1 minute. I am looking for a way to root manually via adv or another method because I cannot see the recovery screen to know what buttons to click.
Sent from my HTC_Amaze_4G using xda app-developers app
I'm no mean an expert here but reading your frustration posts since yesterday, here's my 2 cents, you may want to try it or wait for more suggestion from others
* I've read somewhere that some "Demo" phone came with a "Demo" Rom, which, has no Hboot and Recovery
* Read this post and try to flash an ENG Hboot onto your phone. ENG Hboot for Amaze 4G can be found in the S-Off thread
* After suscessfully flashed ENG HBoot using ADB command, you can then use fastboot to flash back to stock then root normally or using AIO Toolkit again to flash custom Recovery
---------- Post added at 06:26 PM ---------- Previous post was at 06:15 PM ----------
antiquezip said:
I'm no mean an expert here but reading your frustration posts since yesterday, here's my 2 cents, you may want to try it or wait for more suggestion from others
* I've read somewhere that some "Demo" phone came with a "Demo" Rom, which, has no Hboot and Recovery
* Read this post and try to flash an ENG Hboot onto your phone. ENG Hboot for Amaze 4G can be found in the S-Off thread
* After suscessfully flashed ENG HBoot using ADB command, you can then use fastboot to flash back to stock then root normally or using AIO Toolkit again to flash custom Recovery
Click to expand...
Click to collapse
Ignore this please, since ENG Hboot can only be flash when S-Off'ed. I really have no worthy suggested at this point and sorry for that
---------- Post added at 07:07 PM ---------- Previous post was at 06:26 PM ----------
There is a tool called Android Flasher (Google it) which you can use to flash Hboot onto your phone. As for the Hboot I think you can pulled it out from Stock RUU using 7Zip. Once you have Hboot on the phone, the rest will be easy. I think maybe your phone was a Demo one, which, unfortunately doesn't come with Hboot and Recovery hence the reason it doesn't "update" Hboot and Recovery when flashing RUU
I have already flashed an RUU which completed successfully. Would this stock RUU still not flash HBOOT on my phone?
I am using the phone to type this.
I can power off and then hold vol down and power and the phone will do flash a red notification light up top. If I press down volume once then power it will reboot but I of course only see a.black screen.
Sent from my HTC_Amaze_4G using xda app-developers app
jtkknj said:
I have already flashed an RUU which completed successfully. Would this stock RUU still not flash HBOOT on my phone?
I am using the phone to type this.
I can power off and then hold vol down and power and the phone will do flash a red notification light up top. If I press down volume once then power it will reboot but I of course only see a.black screen.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
No it wont change it. It can only be changed after s-off. I would try to s-off. Jbear gives the option to flash a different hboot at the end of a successful s-off. Then hopefully you can finally get this thing rolling.
Definately will.
I thought root was a prereq for s off though. I'll be trying it anyways.
Sent from my HTC_Amaze_4G using xda app-developers app
jtkknj said:
I have already flashed an RUU which completed successfully. Would this stock RUU still not flash HBOOT on my phone?
I am using the phone to type this.
I can power off and then hold vol down and power and the phone will do flash a red notification light up top. If I press down volume once then power it will reboot but I of course only see a.black screen.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
It's good to know that you are - at least - still have a Rom on your phone.
I think the reason why you don't have HBoot and recovery when flashing RUU is because what RUU does is just "updating" whatever img that your phone has on it and when it didn't detected Hboot and recovery, it just skipped updating those img. Long story short, I guess you are lacking HBoot and recovery on your phone. We may simply solv this by flashing stock Hboot and recovery onto the phone using tool such as Android Flasher. Again, I'm no expert on this and has never tried this before so take it with a grain of salt and do some research before give it a go, or, you can wait a little longer to get others' opinion. I don't want to be the one who bricked your phone by giving poor advices.
Be patient, at least you have a fully functional phone for now.
I edited this out...
Good luck
jtkknj said:
I cannot see HBOOT or Recovery.
My display is not working correctly for some reason. I have flashed the stock RUU and unlocked the bootloader via the toolkit.
Now I am stuck because I cannot see the recovery screen to actually install the superuser.zip that the toolkit put onto my sdcard.
Do you see what I am saying here?
If I could simply see my HBOOT and recovery screens I would have this phone rooted in 1 minute. I am looking for a way to root manually via adv or another method because I cannot see the recovery screen to know what buttons to click.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
Now I totally understand... I think . Never have heard of this happening or have read where someone has lost the bootloader but yet phone still boots. There is the command with Hasoon's Amaze tool that will put your phone in the bootloader screen. If your still not able to view if you have tried this then hopefully someone else might have an answer for you as I have no other ideas to get you into the bootloader screen and making it visable. Good luck!
Double0EK said:
No it wont change it. It can only be changed after s-off. I would try to s-off. Jbear gives the option to flash a different hboot at the end of a successful s-off. Then hopefully you can finally get this thing rolling.
Click to expand...
Click to collapse
Got S-OFF and JBear installed its own HBOOT but STILL NO HBOOT SCREEN!!!!!!!!
All I want is a rooted phone so I can throw a different ROM on here.
4EXT Recovery Control
jtkknj said:
Got S-OFF and JBear installed its own HBOOT but STILL NO HBOOT SCREEN!!!!!!!!
All I want is a rooted phone so I can throw a different ROM on here.
Click to expand...
Click to collapse
There's probably some soft which can flash ZIP from sd commencing this from Android and then completing what is needed inside Recovery automatically..
https://play.google.com/store/apps/details?id=ext.recovery.control
jtkknj said:
Got S-OFF and JBear installed its own HBOOT but STILL NO HBOOT SCREEN!!!!!!!!
All I want is a rooted phone so I can throw a different ROM on here.
Click to expand...
Click to collapse
I already told you how to get root in your other thread using 4ext recovery app.
Also, you don't need to root to flash a different rom.
Just do what i said here http://forum.xda-developers.com/showthread.php?p=38165221
sent from my
NRGized amaze
powered by Faux
jtkknj said:
Got S-OFF and JBear installed its own HBOOT but STILL NO HBOOT SCREEN!!!!!!!!
All I want is a rooted phone so I can throw a different ROM on here.
Click to expand...
Click to collapse
hboot screen looks like this...
bootloader
reboot
reboot bootloader
power down
the screen starts with the "bootloader" already selected...push volume down
1 time to select reboot
2 times to select reboot bootloader..etc etc...
push power to MAKE/activate the selection.
4ext recovery is touch based and since you cant see you may want to install clockwork mod from the market as you use the volume buttons for this too!
but i dont use it...(but i have! on this phone!! I just dont know how good it works reliable flashing etc)
maybe get a spare sd card and format it so we all know its blank.
then place the right file on the card
so we know its the only file
then you can count the volume clicks to the right choices.
heres hope for you buddy!... my suspicions are as follows.
flashing a different hboot using
the linked hassoons toolkit then CWM then a reboot may return your screen to power on during the times you need it...
BUT BUT BUT!!!!
i do not know if that is advisable or bad or perfectly fine...anyone else know?????