looks like were getting a new update
so is an OTA an RUU?
if it is. than is it ok to make a nandroid backup and restore on a new RUU?
EDIT: i think the rom would have to support a certain version of an RUU?
http://www.androidpolice.com/2013/02/18/htc-rezound-and-icredible-2-receiving-minor-ota-updates/
Something doesn't seem right about this. Baseband versions are old, pre-global firmware. I thought the 3.14.605.12 came with the global radios?
Looks like a very minor update.
It probably won't come with global radios, as that was the 4.03.605.x version.
And for op, your nandroid won't work going from one firmware version to another
Sent from my ADR6425LVW using xda app-developers app
hope it ain't a bootloader lockdown, like they did with my note 2
Sent from my SCH-I605 using Tapatalk 2
so these will be flashable for ppl with custom roms or do i have to go back to stock to get the update and flash back to my rom?
Or for only stock roms?
Sent from my ADR6425LVW using xda app-developers app
mike7728 said:
hope it ain't a bootloader lockdown, like they did with my note 2
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I don't think HTC is going to do that.
FYI: Thread started about 10 mins before yours yesterday, ha!
http://forum.xda-developers.com/showthread.php?t=2154288
thelunchboxosu said:
FYI: Thread started about 10 mins before yours yesterday, ha!
http://forum.xda-developers.com/showthread.php?t=2154288
Click to expand...
Click to collapse
haha, srry didnt look.
To answer an OP question, an OTA is not an RUU. OTA = over the air. An RUU is essentially a full device dump. An OTA normally only contains the changes since the previous version. I haven't seen an RUU version of this update in the wild yet.
bunchies said:
haha, srry didnt look.
Click to expand...
Click to collapse
No worries at all, just wanted to make sure everyone saw both threads!
socal87 said:
Something doesn't seem right about this. Baseband versions are old, pre-global firmware. I thought the 3.14.605.12 came with the global radios?
Click to expand...
Click to collapse
Thing you have to realize, the Global RUU was/is a leak with a build # 4.03.605.2. I'm looking into making an RUU for you guys that contains the OTA. If you're s-off, I say play with the global radios, if s-on stay with the ota firmware.
Related
I had a thought that came to my mind.
I understand that the big issue with the rollback is the bootloader or w/e
I'm so tired of my v1 of the 2.1 leak.
Is it possible to use an image of the OTA 2.1 since I'm assuming the bootloader from the OTA and the leak is the same....
Any ideas?
Re: Question
You would think so but issue with bootloader is they are the same version with s- on. With that the device assumes the its is same version as leak and you get an error when trying to flash. Say in version you are trying to load is older than the one you have. If that weren't true then rooting would be possible on the leak. Sorry.
-------------------------------------
Sent via the XDA Tapatalk App
I'd think you should be able to flash the OTA update. Since you're on leak v1, you stand to get quite a few improvements and bug fixes, at the very least. It won't help you root unfortunately, but it would still be an upgrade for you, if you don't mind a brand new flash.
Re: Question
Yeah you would think but ota has lower version of bootloader. The leak has 1.49 and ota has 1.46 or 1.47. And device assumes ota is older version of Android. The only version you can flash once on leak is desire ruu which is a new release. There is I post for it in the Android development forum.
-------------------------------------
Sent via the XDA Tapatalk App
What about leak v3? It's basically the same as the OTA and you should be able to update to that.
Re: Question
Download ROM HERE
It seems to be a Verizon Droid Eris 2.1 Official ROM.
RUU_Desire_C_Verizon_WWE_2.36.605.1_release_signed_with_driver.exe
Click to expand...
Click to collapse
Yes you can use leak version 2 or 3. Or the release which they are installing on all phones as they produced them in Feb. Before Eris got discontinued.
-------------------------------------
Sent via the XDA Tapatalk App
-------------------------------------
Sent via the XDA Tapatalk App
Alright so if I'm reading all this correctly I should be able to flash into a newer leak...
Does anyone have any idea how I'm supposed to do this?
Do I flash to Leak V3 or to the desire ruu rom?
Thanks for all the great answers by the way.
From the looks of things I'm not as stuck as I thought I was.
comptontravis said:
Alright so if I'm reading all this correctly I should be able to flash into a newer leak...
Does anyone have any idea how I'm supposed to do this?
Do I flash to Leak V3 or to the desire ruu rom?
Thanks for all the great answers by the way.
From the looks of things I'm not as stuck as I thought I was.
Click to expand...
Click to collapse
If i were you i would flash with the RUU rom.
Granted they're both the same OS, its the official one from Verizon.
Better safe than sorry
Nikolai2.1 said:
If i were you i would flash with the RUU rom.
Granted they're both the same OS, its the official one from Verizon.
Better safe than sorry
Click to expand...
Click to collapse
Sounds good, Thanks again everyone!
I'll go ahead and flash and let everyone know how it goes.
Nikolai2.1 said:
If i were you i would flash with the RUU rom.
Granted they're both the same OS, its the official one from Verizon.
Better safe than sorry
Click to expand...
Click to collapse
Yep thats what I did. I put the RUU over Leak v3 and at the least I am "offical" now since I couldnt do anything anyway (root, etc). Simple process with the RUU.
Can someone point me in the right direction as to how I use the Ruu?
Do I install it on my computer first or just put it directly onto my SD card like with the v1 rom?
comptontravis said:
Can someone point me in the right direction as to how I use the Ruu?
Do I install it on my computer first or just put it directly onto my SD card like with the v1 rom?
Click to expand...
Click to collapse
Nevermind I figured it out : D
mortymouse said:
Yep thats what I did. I put the RUU over Leak v3 and at the least I am "offical" now since I couldnt do anything anyway (root, etc). Simple process with the RUU.
Click to expand...
Click to collapse
Yeah same here. You might has well seeing as like you said we cant do anything with root yet. I havent noticed any changes since i did that but hey why not?
Well the RUU Rom loaded nicely.
Finally no more 2.1 v1 leak!!!
Re: Question
Good to hear, let's just hope we won't be on it long and jcase can crack this thing.
-------------------------------------
Sent via the XDA Tapatalk App
N/M (whoops - didn't see you got it done above. good deal.)
Hello, I did an OTA update and now I have version 1.45.1500.3 and cannot revert back to stock because the RUU on the site is version 1.45.1500.2 and it's impossible to downgrade. I was wondering if anyone has the current version?
uofaboy said:
Hello, I did an OTA update and now I have version 1.45.1500.3 and cannot revert back to stock because the RUU on the site is version 1.45.1500.2 and it's impossible to downgrade. I was wondering if anyone has the current version?
Click to expand...
Click to collapse
theres no way to get current version thats why i say dont update otas you see the reason now?
xboarder56 said:
theres no way to get current version thats why i say dont update otas you see the reason now?
Click to expand...
Click to collapse
I warned people about this in another thread, and told them you're going to be mad X. No one listens!!
http://forum.xda-developers.com/showthread.php?t=1427897
In my defense, I had just joined the forum yesterday and for the first time unlocked the bootloader, removed root, flashed a custom rom and kernel. But the OTA update was performed before I even came onto XDA, so I didn't know that because of it I would not be able to revert to stock. Now I do.
Sent from my HTC Amaze 4G using XDA App
uofaboy said:
In my defense, I had just joined the forum yesterday and for the first time unlocked the bootloader, removed root, flashed a custom rom and kernel. But the OTA update was performed before I even came onto XDA, so I didn't know that because of it I would not be able to revert to stock. Now I do.
Sent from my HTC Amaze 4G using XDA App
Click to expand...
Click to collapse
Well the bright side is I bet you never make that mistake again.
Sent from my HTC_Amaze_4G using xda premium
I'm currently rooted and I'm running team viper 1.03. However, I updated previously to the leaked ICS 5-7 firmware which came with some pretty crappy radios for me. I use to get much higher 4g speeds, and I'd like to return to the gingerbread ones. I saw this thread and I was wondering if it was safe to flash these firmwares here:
http://forum.xda-developers.com/showthread.php?t=1614366
There's no mention about s-on anywhere so I'm not sure.
Sorry, you need to be s-off to flash these
Sent from my ADR6425LVW using Tapatalk 2
yeah, you're going to want to use the jbear S-OFFmethod at http://unlimited.io to S-OFF your phone first
weaaddar said:
I'm currently rooted and I'm running team viper 1.03. However, I updated previously to the leaked ICS 5-7 firmware which came with some pretty crappy radios for me. I use to get much higher 4g speeds, and I'd like to return to the gingerbread ones. I saw this thread and I was wondering if it was safe to flash these firmwares here:
http://forum.xda-developers.com/showthread.php?t=1614366
There's no mention about s-on anywhere so I'm not sure.
Click to expand...
Click to collapse
The first line on that thread. - S-OFF DEVICES ONLY
S-OFF was very easy to do and really is worth the few minutes that it takes. Just make sure you download the correct version for your firmware.
mjones73 said:
The first line on that thread. - S-OFF DEVICES ONLY
Click to expand...
Click to collapse
I added that afterwards so don't blame him
Sent from my ADR6425LVW using Tapatalk 2
Damnit man! Just kidding.
OP, sorry about that
Sent from my ADR6425LVW using Tapatalk 2
RUU is up on Android Police's site! Check it out!
http://www.androidpolice.com/2012/08/02/exclusive-download-htc-rezound-ice-cream-sandwich-ruu-for-final-ota-3-14-605-12/
08/12 was month not day
First
Sent from my ADR6425LVW using Tapatalk 2
izzaeroth said:
[ruu] 3.14.605.12 [08/12]
RUU is up on Android Police's site! Check it out!
http://www.androidpolice.com/2012/08/02/exclusive-download-htc-rezound-ice-cream-sandwich-ruu-for-final-ota-3-14-605-12/
Click to expand...
Click to collapse
From the future...
since you posted the OTA almost 3 weeks before the official one, can we expect the kernel source from you soon?
live2die said:
since you posted the OTA almost 3 weeks before the official one, can we expect the kernel source from you soon?
Click to expand...
Click to collapse
I am hoping, but you never know...
Does this have the same hboot as .10?
Any kernel changes?
Sent from my ADR6425LVW using xda premium
"This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off "
Is there anyone who as actually tried this official update w/just having S-Off? I'm not quite daring enough to hop out there and doing it without having someone have mentioned or tried it first. My phone is my business phone, so it will make things difficult having it down for any period of time.
shrike1978 said:
Does this have the same hboot as .10?
Click to expand...
Click to collapse
yes
I was going to ask is this is same version of the leaked we had a couple weeks ago? Or is it an updated version?
jmackin1016 said:
"This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off "
Is there anyone who as actually tried this official update w/just having S-Off? I'm not quite daring enough to hop out there and doing it without having someone have mentioned or tried it first. My phone is my business phone, so it will make things difficult having it down for any period of time.
Click to expand...
Click to collapse
What if you are both HTC unlocked and s-off ? Do you have to relock ?
Sent from my ADR6425LVW using xda premium
cbrown245 said:
What if you are both HTC unlocked and s-off ? Do you have to relock ?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
not if ur s-off
izzaeroth said:
not if ur s-off
Click to expand...
Click to collapse
you will still retain unlocked, it will just chg ur hboot to stock and recovery, but just use firmware patch if need be and flash custom recovery
Has anyone flashed this ? How is battery life ? Any improvements with stock kernel?
Sent from my ADR6425LVW using xda premium
cbrown245 said:
Has anyone flashed this ? How is battery life ? Any improvements with stock kernel?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
ive been running the rom'ed ver and battery life seems about the same. not sure about improvements to kernel. .10 and .12 have same
Any new radios with this RUU??
cowman4000 said:
Any new radios with this RUU??
Click to expand...
Click to collapse
sadly no there isnt
I'm wondering if with s-off and unlocked, but stock 2.11 GB if its possible to get the OTA and what happens if I do take it. I plan to run the RUU and unlock and root that again.
bond32 said:
I'm wondering if with s-off and unlocked, but stock 2.11 GB if its possible to get the OTA and what happens if I do take it. I plan to run the RUU and unlock and root that again.
Click to expand...
Click to collapse
if u run this ruu it will still be unlocked but it will update your firmware to ics and hboot, but just install a custom recovery and root and youre set. it will wipe your data so be sure to use TB
izzaeroth said:
if u run this ruu it will still be unlocked but it will update your firmware to ics and hboot, but just install a custom recovery and root and youre set. it will wipe your data so be sure to use TB
Click to expand...
Click to collapse
Is there any advantage to being on ICS hboot/firmware? I have been flashing roms but I went s-off last night to make the process easier. I suppose I don't mind flashing the GB patch. Thanks for the quick reply
UNOFFICIAL CM10.1 [JB-4.2.2] for HTC Rezound
Support thread for the community
Note: This is the official support thread for my ROM UNOFFICIAL CM10.1 [JB-4.2.2] for HTC Rezound. If you are having trouble and need a little help, this is the place to ask questions. DO NOT post your question in my ROM's thread in the development section. Post them here.
Please consider checking the Frequently Asked Questions section for my ROM first to see if there is an answer for your question. If there is not, then by all means feel free to post your question!
Click to expand...
Click to collapse
Thanks in advance to the users of my ROM who may also help out answering questions that get posted in this thread
Original question
K I'm thinking of updating radios and hboot now my radios are 1xxxxxxx and 1xxxxx my hboot though is 2.27 which if I'm not mistaken is the newest one? I know I have asked about this before but if I update will it brick if I am already on the newest hboot or will it not matter? I just want to make sure I know what I'm doing.
I understand that's how I do it but is it safe to if I'm already on 2.27 hboot. I'm sorry stang I'm just confused and is just something I remember being a problem from the incredible days.
Reply
I could be wrong but I believe the procedure involves downloading the RUU, opening the zip with an archive manager and just remove everything out of the RUU you do not want to update and then just close the zip, rename it and flash it in hboot. Don't try that until we can get a better answer though. Lets move this question over to the support thread.
Sent from my ADR6425LVW using xda app-developers app
zkrp5108 said:
K I'm thinking of updating radios and hboot now my radios are 1xxxxxxx and 1xxxxx my hboot though is 2.27 which if I'm not mistaken is the newest one? I know I have asked about this before but if I update will it brick if I am already on the newest hboot or will it not matter? I just want to make sure I know what I'm doing
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
darkghost568 said:
Yep. That's the newest HBOOT.
Click to expand...
Click to collapse
zkrp5108 said:
So how do I go about updating the baseband versions
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
wildstang83 said:
Q6
Click to expand...
Click to collapse
zkrp5108 said:
I understand that's how I do it but is it safe to if I'm already on 2.27 hboot. I'm sorry stang I'm just confused and is just something I remember being a problem from the incredible days.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Like I was saying, I could be wrong but I believe the procedure involves downloading the RUU, opening the zip with an archive manager and just remove everything out of the RUU you do not want to update and then just close the zip, rename it and flash it in hboot.
So if you download the RUU and open it up with an archive manger like 7Zip you can see a bunch of files:
adsp.img
android-info.txt
boot_signed.img
dzdata_16g.hdr
dzdata_16g.img
hboot_8x60-lte_2.27.0000_120803_MR2_signedbyaa.nb0
mdm9k.img
mdmrcdata_3.01_002.img
pg2fs_spcustom.img
radio.img
ramdisk.img
rcdata_1.16.002.img
recovery_signed.img
rpm.img
sbl1.img
sbl2.img
sbl3.img
splash1.nb0
system.img
tp_atmel224e_1101.img
tz.img
I think your supposed to remove everything but android-info.txt and radio.img and just close the zip, rename it to PH98IMG.zip and flash in HBOOT. I'd rather you not do this though until someone gives us a better answer as I rarely mess with radios and such. Things are quite a bit different than what they were on the Incredible.
Right on
Sent from my ADR6425LVW using xda app-developers app
I have installed a few different JB roms on my rezound and recently after installing this rom my notification drawer is not responding correctly. wWhen pulling down the drawer it stops at the date and the button for the quick settings and it just stays there and the hardware buttons are then unresponsive. Is this a known issue? I searched but didn't find any mention. It does this on any JB rom/kernel I have tried.
Thanks in advance for the help!
rghart09 said:
I have installed a few different JB roms on my rezound and recently after installing this rom my notification drawer is not responding correctly. wWhen pulling down the drawer it stops at the date and the button for the quick settings and it just stays there and the hardware buttons are then unresponsive. Is this a known issue? I searched but didn't find any mention. It does this on any JB rom/kernel I have tried.
Thanks in advance for the help!
Click to expand...
Click to collapse
Hmm, yea that is definitely not normal and isn't a known bug, with this Rom at least. I'm assuming your Rezound is on the very latest firmware and you have followed the install instructions perfectly right? Are you using other kernels with this rom and thats what causing the problem, or does it do it on the stock kernel as well?
EDIT: Also does the bug continue if a different launcher is used like Apex, Nova, Launcher Pro or ADW EX?
I am s-off I am going to do an ruu and see if it is fixed. I have tried multiple Roms including yours ,shrike's, and Neo's, each with the kernel the ROM comes with. I had shrike's pacman for a while and it never had this issue.
Hboot-2.27.00 I'm sorry but where do I find the firmware info? Or does the hboot suffice?
Settings / About phone / Baseband version. Also I asked about the launcher. Does using a different one fix the problem?
Sent from my SCH-I605 using Tapatalk 2
The baseband version is 2.22.10.0801r, 2.22.10.0803r
I installed apex and it acts the same.
Sent from my Nexus 7 using Tapatalk 2
The only other reports I can find related to your issue were caused by defected screens on certain devices. The cause is slight screen lift at the top. The effect would be the Status bar could not be dropped down, could only sometimes be dropped down, or could be dropped down most of the time with a minor issue getting the shade to pull down ever so often. I'd suggest RUUing back to stock and if the issue is still there, send the phone in for repair or replacement.
Stang did you ever get a response or more info on me updating the baseband
Sent from my ADR6425LVW using xda app-developers app
I'm upgrading my firmware and radios as I'm still on a 1.x radio for some reason, and I'm downloading the RUU, checking the MD5 both on my SDcard and it matches, rename it to " PH98IMG.zip", I boot into Hboot and it checks the file for 30-45 seconds, then never asks me to upgrade? Any ideas?
Currently on Hboot 2.21.000 and radio 1.22.10.0310r/1.22.10.0300r. I am S-on but unlocked. Waiting to do this RUU, then S-off, then flash this rom.
hollisjamison said:
I'm upgrading my firmware and radios as I'm still on a 1.x radio for some reason, and I'm downloading the RUU, checking the MD5 both on my SDcard and it matches, rename it to " PH98IMG.zip", I boot into Hboot and it checks the file for 30-45 seconds, then never asks me to upgrade? Any ideas?
Currently on Hboot 2.21.000 and radio 1.22.10.0310r/1.22.10.0300r. I am S-on but unlocked. Waiting to do this RUU, then S-off, then flash this rom.
Click to expand...
Click to collapse
Same thing is happening to me hollis, and I think it's because you're S-on. I saw a blurb somewhere that said to do the RUU you have to either be on the stock ROM or be S-off already.
I'm still S-on too. I looked into the JuopunutBear S-off procedure and it said a prerequisite was also that I be on the stock ROM 1st. So, do I have to somehow get my Rezound back to stock and off of the ViperRez ROM I'm on now, then do JuopunutBear, then do the RUU, then do a new recovery, then do CM10?
KnightDavid said:
Same thing is happening to me hollis, and I think it's because you're S-on. I saw a blurb somewhere that said to do the RUU you have to either be on the stock ROM or be S-off already.
I'm still S-on too. I looked into the JuopunutBear S-off procedure and it said a prerequisite was also that I be on the stock ROM 1st. So, do I have to somehow get my Rezound back to stock and off of the ViperRez ROM I'm on now, then do JuopunutBear, then do the RUU, then do a new recovery, then do CM10?
Click to expand...
Click to collapse
Figured it out, you have to relock your bootloader to install RUUs. Just installed the RUU... S-OFF next, then install CM 10.1
zkrp5108 said:
Stang did you ever get a response or more info on me updating the baseband
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Not yet. Hoping someone will know...
Sent from my SCH-I605 using Tapatalk 2
What are the benefits of the newer radios?
Battery life better signal strength global calling
Sent from my ADR6425LVW using xda app-developers app
Using the bootloader I ran the RUU. It fixed the problem with the notification drawer. I tried your ROM and Neo's and there doesn't seem to be any problems.
Thank you very much for having this thread!
Sent from my ADR6425LVW using Tapatalk 2
rghart09 said:
Using the bootloader I ran the RUU. It fixed the problem with the notification drawer. I tried your ROM and Neo's and there doesn't seem to be any problems.
Thank you very much for having this thread!
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Ah that is good to see. Very happy it worked for you
okay, i can't seem to get the RUU to actually update and install for some reason, i dloaded it, checked the MD5 and renamed it. all it will do is recognize it, check it. and then stops there anyone able to point me to an instruction set (already tried and Dloaded Wildstang's)