[Q] "Mobile Network not Available" - Atrix 4G Q&A, Help & Troubleshooting

Hi all, it seems like I'm mucked something up on my phone because I'm just getting this message every time I try to make a call.
What I've done to try and fix it: double checked APN, set network operator, tried flashing back to stock through the automatic unlock tool (doesn't work..? it tries to open RSD lite and then the phone restarts back into CM 10.1), calling my carrier's support line (straighttalk, gave up after 2 hours on hold), so I'm coming to you guys.. anybody get this message before? What can I do?
Searching for it on the forums gives a whole host of different solutions from something to do with the kernel, a package that's carrier specific (not my carrier), checking apn, resetting the network operator, etc, I have no idea what to do. Any advice is welcome.
Thank you so much.

Try flashing a diffferent radio. That would be my first suspect.

ravilov said:
Try flashing a diffferent radio. That would be my first suspect.
Click to expand...
Click to collapse
I'm currently baseband N_01.77.30P which is a little outdated I guess, I've found no less than 8 dead links for 36p but no active one, including from the answers thread. Anybody have a link handy?
Edit: http://atrix.tk/baseband/
Added this to the Atrix reboot thread too, so people can find stuff.
Thank you so much for the response.

http://cleanimport.xda/index.php?threads/1583199/

ravilov said:
http://cleanimport.xda/index.php?threads/1583199/
Click to expand...
Click to collapse
Haha, thanks dude but that link is dead too. I posted where I found it here and in the atrix reboot thread.

Flashed 36p, still no luck!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

soulseraph said:
Haha, thanks dude but that link is dead too. I posted where I found it here and in the atrix reboot thread.
Click to expand...
Click to collapse
Oh sorry, that one has always been working, so I didn't really check it.
BTW it's not really dead, just suspended temporarily. I know it makes no difference to you at the moment since you needed the radio right now, I'm just saying.
Did you try going into the hidden service menu (*#*#4636#*#*) and see if there's any useful info there?
Other than that, I suppose your SIM card could also be a problem. Do you have (or can borrow) any other to try out?

ravilov said:
Oh sorry, that one has always been working, so I didn't really check it.
BTW it's not really dead, just suspended temporarily. I know it makes no difference to you at the moment since you needed the radio right now, I'm just saying.
Did you try going into the hidden service menu (*#*#4636#*#*) and see if there's any useful info there?
Other than that, I suppose your SIM card could also be a problem. Do you have (or can borrow) any other to try out?
Click to expand...
Click to collapse
Just got a new sim card in the mail today, figured I'd try that before posting here. Same problem as the last one.
Out of curiosity I dialed 911 and it worked (oops.. hung up right away). I checked my imei to see if its blocked, it isn't.
(*#*#4636#*#*) says: No service and no phone number. LOL.
So I called up straight talk and it turns out they activated my phone incorrectly. 30 minutes on the phone later and I'm good to go.
Thanks again for all the help!

Related

"Connection problem or invalid MMI code" when typing in most # codes into the dialer?

"Connection problem or invalid MMI code" when typing in most # codes into the dialer?
Hi, anyone else experienced this when typing in a code such as #*06# or whatever into the dialer? It is annoying, what is wrong with my handset?
First of all it says USSD running and then "Connection problem or invalid MMI code" ?
Types in no problem for me a factory reset wipes all data might be the answer ,
jje
JJEgan said:
Types in no problem for me a factory reset wipes all data might be the answer ,
jje
Click to expand...
Click to collapse
Thanks for the reply, and yeah I have already done that, factory reset it... Maybe it is to do with when I flashed it or something? Is there a way I can get it back to pretty much factory condition - in terms of flashing it, etc (I am a complete noob so have no idea). Thanks
Just got the same message when I tried to add a couple of contacts to speeddial. Will check it out later.
B3311 said:
Just got the same message when I tried to add a couple of contacts to speeddial. Will check it out later.
Click to expand...
Click to collapse
Hi mate, thanks for the reply. At least someone else gets this with this same phone, not just me...
Okay, can you check that when you make a call does "conditional call forwarding active" come up? I have tried to disable that as it is annoying and even phone 3 mobile and they explained how to do it, yet still comes up. I have gone and reset my phone to factory settings yet it's still a probkem. I think the "Connection problem or invalid MMI code" and this must be linked, as I am sure I noticed both started at the same time?
dynamicbot said:
Thanks for the reply, and yeah I have already done that, factory reset it... Maybe it is to do with when I flashed it or something? Is there a way I can get it back to pretty much factory condition - in terms of flashing it, etc (I am a complete noob so have no idea). Thanks
Click to expand...
Click to collapse
Stock rom post in the dev section flash a stock rom should clean .
jje
JJEgan said:
Stock rom post in the dev section flash a stock rom should clean .
jje
Click to expand...
Click to collapse
Hi JJEgan, thanks for the advice. Is this fairly simple?
Is this the thread I want, and how do I do it (literally I only came on here in the first place because of the problem, I am in no way anywhere near a pro at these sorts of things)?
http://forum.xda-developers.com/showthread.php?t=1130625
Cheers.
Has anyone found a fix for this? On my phone it didn't work in Stock, didn't work when I flashed it to KF3 and a factory reset doesn't help either.
finally found a fix for this. You must use the stock Phone dialer to type in the code!!!
I've been using GO Dialers to type in the code, that's why its not working!! I am on Litening ROM 1.4. I thought those codes only work on stock rom, stock everything but that is not the case here.
Have fun everyone
ok dont know if it will work for you but it worked for me
add comma (,) in the end of the code
example:
*100*2# into *100*2#,
works for me
Heavens_King said:
ok dont know if it will work for you but it worked for me
add comma (,) in the end of the code
example:
*100*2# into *100*2#,
works for me
Click to expand...
Click to collapse
Does not work for me:/
Heavens_King said:
ok dont know if it will work for you but it worked for me
add comma (,) in the end of the code
example:
*100*2# into *100*2#,
works for me
Click to expand...
Click to collapse
where do you even get a comma in the dialer? mine doesn't.
adhistl surgical
poppienutshell said:
where do you even get a comma in the dialer? mine doesn't.
Click to expand...
Click to collapse
Any fix ?
Hello Every One I Have The Same Problem With My T-PAD
I Tried Every King Of Solution But Still Same Problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Q]about phone statue

i have recently install new rom and this is the first time to install one..i have installed (UltimaROM_V11.0KjataUltimate)
then in statue page i have found that..so is that normal or there is a wrong if that.need help to how fix
something else..mobile data not working and i have found there is no accespoints (APNs ) is empty ...what is problem ?!!!
zeyadrani said:
i have recently install new rom and this is the first time to install one..i have installed (UltimaROM_V11.0KjataUltimate)
then in statue page i have found that..so is that normal or there is a wrong if that.need help to how fix
something else..mobile data not working and i have found there is no accespoints (APNs ) is empty ...what is problem ?!!!
Click to expand...
Click to collapse
Factory reset or reinstall rom .
But logic says you ask the question in that roms thread they will say its normal for that rom .
jje
First of all you must be mad! Posting your IMEI is crazy idea!!!
You need to set up APN manually and it will work.
On screenshot, your IP is unavailable because you're not connected to network. Turn WiFi on and IP will be back. The "ERI" is normally "OFF" as well. Nothing wrong with your phone.
JJEgan said:
Factory reset or reinstall rom .
But logic says you ask the question in that roms thread they will say its normal for that rom .
jje
Click to expand...
Click to collapse
so what about the screenshot?!! is all thing ok ??
seriously, remove that image with the imei, you must be mad
he/she clearly mustn't be too bothered.....
zeyadrani said:
so what about the screenshot?!! is all thing ok ??
Click to expand...
Click to collapse
NO
Factory reset or reinstall rom .
But logic says you ask the question in that roms thread they will say its normal for that rom .
Everything on screenshot looks normal. Your APN can be fixed after F.Reset but screen will look exactly the same.
My phone is working fine and stats are the same if WiFi is OFF....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DSA said:
seriously, remove that image with the imei, you must be mad
Click to expand...
Click to collapse
sorry.but what is the problem ?!!
Its not so much a problem, more of a safe thing to do. There are many people that can use that fraudulently causing you no end of problems. ...
Sent from my GT-I9300
*GalaxyFanatic* said:
Its not so much a problem, more of a safe thing to do. There are many people that can use that fraudulently causing you no end of problems. ...
Sent from my GT-I9300
Click to expand...
Click to collapse
ummmmm such as what ?!!!
the IMEI number can be used for fraudulent purposes
mikep99 said:
the IMEI number can be used for fraudulent purposes
Click to expand...
Click to collapse
thaaanks but can u be more clear ?!!
it can be copied and used in a stolen phone that has had its original IMEI blocked for example...
Ok thaaaaanks for that and i have deleted the pic
Sent from my GT-I9300 using xda app-developers app

Network operator name not resolved !!

Hello everyone,
Now this is a strange error... I upgraded to Lollipop 5.1 yesterday and did a fresh installation. Now I can't see the operator names !
If I scan for network operators, I get 55533 -65502 -65504
It should be Vodacom, MTN etc....
Any idea ?
Xeon said:
Hello everyone,
Now this is a strange error... I upgraded to Lollipop 5.1 yesterday and did a fresh installation. Now I can't see the operator names !
If I scan for network operators, I get 55533 -65502 -65504
It should be Vodacom, MTN etc....
Any idea ?
Click to expand...
Click to collapse
Not enough info to help. What phone? Official update or custom rom?
es0tericcha0s said:
Not enough info to help. What phone? Official update or custom rom?
Click to expand...
Click to collapse
Official update. Sony Xperia Z series.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Xeon said:
Official update. Sony Xperia Z series.
View attachment 3466788
Click to expand...
Click to collapse
Can you register on a network, despite it just showing as numbers or does the service not work either? I would post the build number of the software and which Z phone, in case there is something specific that someone else might know about.
es0tericcha0s said:
Can you register on a network, despite it just showing as numbers or does the service not work either? I would post the build number of the software and which Z phone, in case there is something specific that someone else might know about.
Click to expand...
Click to collapse
Yes as you can see from the signal in my posted pic, I am registered to the network.
10.7.A.0.222 is the build number based on Android 5.1.1
Help guys.
Xeon said:
Yes as you can see from the signal in my posted pic, I am registered to the network.
10.7.A.0.222 is the build number based on Android 5.1.1
Help guys.
Click to expand...
Click to collapse
If you're registered to the network, is there really an issue then, other than cosmetic? I know there are multiple versions of different Z phones, like c6602, c6603, etc. Did you make sure to get the correct update for your version? Did you update via OTA, FTF, or Sony PC Companion?
es0tericcha0s said:
If you're registered to the network, is there really an issue then, other than cosmetic? I know there are multiple versions of different Z phones, like c6602, c6603, etc. Did you make sure to get the correct update for your version? Did you update via OTA, FTF, or Sony PC Companion?
Click to expand...
Click to collapse
It's OTA update.
Not really cosmetic as I travel a lot and when I roam I need to select the cheapest plan.
I'm positive that it's the correct version. Never seen anything like that except WM 5.0 back in time.
Yea, not really sure. I've seen it while roaming, but that's it. Guess you could always try a factory reset...I find many kinds of phones, Apple and Android, benefit from resetting after OTAs, especially if it's a large jump in versions.

Need help with editing a kdz file for LGUP

I have posted about my problem in several threads now, but I didn't get an answer yet, so I hope I can finally save my phone with your help here... It's been a major pain the cojones for two weeks already.
In short, here is what happened:
I unlocked the bootloader, installed TWRP and after flashing superSU (once I found out how to get into TWRP), I got a bootloop.
So I wanted to do a full wipe. But I messed up and wiped literally everything, even the OS
Then I went on to look for a stock ROM zip file. I found one, but I didn't read the whole article which said it was for H901. I installed it and found out it's branded T-mobile version on top of all.
Now I'm trying to get back to a H960A stock ROM, but no luck so far.
I have tried both methods from the LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method thread
Then there was a shed of hope when I stumbled upon this thread, where the OP managed to do the same
http://forum.xda-developers.com/lg-v10/help/flashed-h901-h960-comrade-to-help-t3429025
I downloaded the modified Switzerland file mentioned in one of the comments, but it didn't do through for me.
I also tried to run the chkdzdev tool to change my EU version KDZ file, but agian, I got the same error (possibly I didn't do it right, since there is no manual whatsoever and the author doesn't reply)
Here is a screenshot of how it went:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So now, my only hope is to:
a) find a zip with H960A stock ROM (probably none exists on the interwebz)
b) find a TWRP backup that I can "revert" to (not sure if this would work, but if anyone would be so kind, I could find out...)
c) find someone who can modify the KDZ file and tell me how to do it
Anyone?
I messaged a good source about your problem, with any luck he will provide us with a nandroid for you to restore. I'll let you know as soon as I hear back.
If I helped you, please hit the "like" button. Thank you.
RealWelder said:
I messaged a good source about your problem, with any luck he will provide us with a nandroid for you to restore. I'll let you know as soon as I hear back.
If I helped you, please hit the "like" button. Thank you.
Click to expand...
Click to collapse
Any news?
Or anyone has any idea how do I fix this?
Anyone has any idea where to turn for help with this issue? If not on xda, where can I look for a solution?
Try this. There is some instructions here that might be different from what you've been trying.
http://forum.xda-developers.com/lg-v10/general/guide-lg-v10-stock-firmware-to-stock-t3224170
It's saying after you load the firmware into LGUp, you have to close it and then open it again, select refurbish, and then make sure bin file is checked. Hopefully this can get you going. Good luck.
If I helped you, please hit the "like" button. Thank you.
RealWelder said:
Try this. There is some instructions here that might be different from what you've been trying.
http://forum.xda-developers.com/lg-v10/general/guide-lg-v10-stock-firmware-to-stock-t3224170
It's saying after you load the firmware into LGUp, you have to close it and then open it again, select refurbish, and then make sure bin file is checked. Hopefully this can get you going. Good luck.
If I helped you, please hit the "like" button. Thank you.
Click to expand...
Click to collapse
I've tried this one... it wouldn't even let me load the kdz file without doing this...
Problem is, the firmware version is coded somewhere deep in the file and it won't let me install it on a device that has a different version (unfortunately mine was overwritten by the stupid stock ROM i've managed to install)

bluetooth virus? logo stack

Hi, all!
My phone died at the morning after using Bluetooth at the public. Is there a possibility to recover it with a data? LTE version.
Thanks in advance,
Mateusz
Does it turn on at all?
Does it bootloop?
boot-loop
Vagelis1608 said:
Does it turn on at all?
Does it bootloop?
Click to expand...
Click to collapse
Yes, it is a boot-loop. PC doesn't see it.
@admin pls change my subject:]
matiz1999 said:
Yes, it is a boot-loop. PC doesn't see it.
@admin pls change my subject:]
Click to expand...
Click to collapse
I take it you don't have root?
And the bootloader is locked?
Some year ago I have it rooted but I get back to standard software
matiz1999 said:
Some year ago I have it rooted but I get back to standard software
Click to expand...
Click to collapse
Since you want to keep your data, try to get into download mode and flash a kdz.
If that doesn't work, I'm afraid you are gonna have to do a "hard reset" (factory reset/data wipe).
May you provide me with a good tutorial for doing it?
Here is one: https://forum.xda-developers.com/showthread.php?t=2797190
If it doesn't work, just use Google to find another one.
I will tell you about the hard reset, if you want.
I am problematic - and some alternative because I cannot install stuff on this PC - some portable version of LG drivers? I cannot find
matiz1999 said:
I am problematic - and some alternative because I cannot install stuff on this PC - some portable version of LG drivers? I cannot find
Click to expand...
Click to collapse
Nope.
Get an admin to install it.
No way around it.
Unless you want to try the hard reset, which doesn't need a PC.
But you will lose all your data.
Sic! But on the downloaded mode, it's writing unrooted user b13>?
Sic! But in downloaded mode there's info that it is unrooted user b13>?
matiz1999 said:
Sic! But in downloaded mode there's info that it is unrooted user b13>?
Click to expand...
Click to collapse
Even better!
That is meant for LG's engineers to see if your phone is rooted when you sent it in for a fix under the warranty.
If it says rooted, they will mark warranty void and won't fix it, unless you pay them.
Anyway, it let's you flash no matter what it says there.
So go ahead and flash the kdz.
Okay, cool for me.
I already started it but
1st I am not sure which version I have, can I check it somewhere
2nd the tool shows that my phone is disconnected
matiz1999 said:
Okay, cool for me.
I already started it but
1st I am not sure which version I have, can I check it somewhere
2nd the tool shows that my phone is disconnected
Click to expand...
Click to collapse
There is a sticker behind the battery.
Vagelis1608 said:
There is a sticker behind the battery.
Click to expand...
Click to collapse
die
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://ibb.co/c0kwrk https://ibb.co/c0kwrk
"do you wish to cancel s/w update"
"phone is disconnected from the PC"
I tried already 3 more tutorials
matiz1999 said:
die https://ibb.co/c0kwrkhttps://ibb.co/c0kwrkhttps://ibb.co/c0kwrkhttps://ibb.co/c0kwrk
"do you wish to cancel s/w update"
"phone is disconnected from the PC"
I tried already 3 more tutorials
Click to expand...
Click to collapse
Make sure that the cable is good.
The older it is, the more likely it is to cause issues during data transfers.
My suggestion?
Get a new one.
Or, you could borrow one from a friend, but make sure it works on data transfers, not just charging.
I made 2 kdz flashes but the phone still bricks. Rescue data, but all in all install Lineageos- CM RIP. Thank you!
PS: Subject to close:]

Categories

Resources