I have hboot 1.5 and rooted my Evo 3D using the HTC method.
Anyway my screen will work in hboot, recovery, and on the HTC splash screen, but after that it just goes black.
I know my phone is fully booting though because the notification light works when I get a new message etc, and I can swipe the lock ring and feel the screen vibrate on keypad for my pin.
I think this happened after flashing a kernel in joeykrim's flash gui app.
I've tried flashing new roms or restoring a backup in recovery but nothing works.
Considering that I still have recovery and hboot is there anything I can do?
lrrowley said:
I have hboot 1.5 and rooted my Evo 3D using the HTC method.
Anyway my screen will work in hboot, recovery, and on the HTC splash screen, but after that it just goes black.
I know my phone is fully booting though because the notification light works when I get a new message etc, and I can swipe the lock ring and feel the screen vibrate on keypad for my pin.
I think this happened after flashing a kernel in joeykrim's flash gui app.
I've tried flashing new roms or restoring a backup in recovery but nothing works.
Considering that I still have recovery and hboot is there anything I can do?
Click to expand...
Click to collapse
Try wiping everything (data, cache, dalvik) then do a factory reset, then flash a ROM and boot.
Twolazyg said:
Try wiping everything (data, cache, dalvik) then do a factory reset, then flash a ROM and boot.
Click to expand...
Click to collapse
I just tried that a couple times and the screen is still going black after the HTC screen
You may need to wipe more than just /data etc. Either go find a good super wipe or format /system /boot /cache and /data might as well wipe android secure on the sd card too. Most likely you have a few leftover modules from your kernel that aren't playing nice. After doing this load the rom you want on the sdcard. Then flash it from fastboot on the computer. You won't be able to use joeykrms gui since by formatting everything you won't be able to boot untill everything is replaced. Flashing through fastboot on the computer will accomplish this for you.
3VO Sent
lrrowley said:
I have hboot 1.5 and rooted my Evo 3D using the HTC method.
Anyway my screen will work in hboot, recovery, and on the HTC splash screen, but after that it just goes black.
I know my phone is fully booting though because the notification light works when I get a new message etc, and I can swipe the lock ring and feel the screen vibrate on keypad for my pin.
I think this happened after flashing a kernel in joeykrim's flash gui app.
I've tried flashing new roms or restoring a backup in recovery but nothing works.
Considering that I still have recovery and hboot is there anything I can do?
Click to expand...
Click to collapse
You shoot boot in bootloader then hit power button > connect usb > it should say fastboot usb> flash the boot.img from the rom you flashed using command fastboot flash boot boot.img ( make sure you copy boot.img in you fastboot folder) > then fastboot boot cwmxxxxxxx.img > then flash a 2.3.4 kernel not any other ( ziggy anthrax etc ) then try to reboot. If you have wiped you rom then flash boot.img from the rom you wanna flash then boot into recovey using fastboot > then flash rom.zip >then flash a 2.3.4 kernel
Sorry i wasnt able to explain clearly .....i wanna go to work
hope this helps.
Dont forget to thank if i helped you
mnomaanw said:
You shoot boot in bootloader then hit power button > connect usb > it should say fastboot usb> flash the boot.img from the rom you flashed using command fastboot flash boot boot.img ( make sure you copy boot.img in you fastboot folder) > then fastboot boot cwmxxxxxxx.img > then flash a 2.3.4 kernel not any other ( ziggy anthrax etc ) then try to reboot. If you have wiped you rom then flash boot.img from the rom you wanna flash then boot into recovey using fastboot > then flash rom.zip >then flash a 2.3.4 kernel
Sorry i wasnt able to explain clearly .....i wanna go to work
hope this helps.
Dont forget to thank if i helped you
Click to expand...
Click to collapse
Oh man thanks so much! It totally worked!
Am I going to have to do this same procedure every time I want to flash a rom from now on, or should things be fixed?
lrrowley said:
Oh man thanks so much! It totally worked!
Am I going to have to do this same procedure every time I want to flash a rom from now on, or should things be fixed?
Click to expand...
Click to collapse
I don't know exactly if you have to follow same steps for different roms. Flash image GUI is to flash. recoveries and kernel. I had only used that software twice for kernel and never tried it for recovery. It has some issues with few kernels. Some work some dont. I use. the steps posted in second post of infected eternity rom thread . I don't follow all steps as all of them are not necessary.
And I think only 2.3.4 kernels work on hboot 1.50 with flash image GUI.Roms and kernels are meant to be flashed from fastboot using PC. untill we get s-off.
Need some help and am not having any luck on the forums.
I have an Hboot 1.5 Evo 3D rooted with the Synergy ROM. I have EXT4 files, and a ziggy kernal.
I have had the ROM or 2 months. I overclocked it to 1.8 GHZ the other day and locked the phone up. I kept trying to reboot and when I did it just locked up. I overcloked in SetCPU, and it was checked "set at boot", so I couldn't get it back down. I kept doing this, tried a factory reset in hboot, and now the only thing the phone does is tries to boot the rom and gets stuck after about 30 seconds.
What can I do? Is this phone fried? I tried to use the command prompt on my computer and can't get anything to communicate with the phone via fastboot USB. Answers needed as I have had a non functioning phone for 4 days. An answer or a link would be greatly appreciated.
Boot into recovery and flash a new rom (or reflash the rom). Make sure you wipe data/cache partitions/dalvik cache before flashing the rom and then wipe the dalvik cache again after flashing the rom.
Theonew said:
Boot into recovery and flash a new rom (or reflash the rom). Make sure you wipe data/cache partitions/dalvik cache before flashing the rom and then wipe the dalvik cache again after flashing the rom.
Click to expand...
Click to collapse
Can't get into clockwork mod recovery to do that. Don't know what the problem is but I am about to just run this thing over and take it to Best Buy.
bgdog86 said:
Can't get into clockwork mod recovery to do that.
Click to expand...
Click to collapse
Reflash ClockworkMod recovery then, via fastboot. Use this: http://forum.xda-developers.com/showthread.php?t=794638.
Okay I know this is a noob question so PLEASE excuse my noob-ism. Not sure if this should be in Q&A or Dev so please move to the correct section if I posted in the wrong one.
Okay, so my phone was originally 4.0.4 with a 1.19 HBOOT and 4.1 Sense. I rooted my phone, read up on a couple of threads and youtube videos regarding how to flash CM10 and from what I got if you have 1.19 HBOOT you can't just flash it using TWRP because you can't go S-OFF. Here is where I was a bit confused and think I went wrong. I read in the description of this video http://www.youtube.com/watch?v=HsQKOhqdPpM that if you aren't S-OFF that there is a workaround, which linked me to this page http://forum.xda-developers.com/showpost.php?p=29417266&postcount=1397 . So the 1st option said that it's possible to flash using Flash Image GUI to flash CM10 THEN to flash it in recovery, which I did. However now that I look closely at the pics it says only for EVO4G and the 3D. Here's where I'm at, Flashed using Flash Image GUI, then rebooted to HBOOT, then recovery, then flashed using TWRP. It looked like a success after rebooting because I seen the CyanogenMod boot screen but it's been about 25 minutes and it's just stuck there. Read up on it some more and it said that it should only take about 5-7 minutes for the first boot. I don't know what to do from here. Is there any way to still boot CM10 on my device since it seems essentially stuck at the "CM" boot screen? If not, what ROM would take me back to where I initially started off previous to trying to flash CM10 (like sense essentially)?
Once again, sorry for the noob-ism but kinda stuck here. Thanks!
I would try going into recovery and wipe Dalvik, Cache and then factory reset, do not wipe system just the 2 I mentioned and reboot, if it stays on boot anim, go to bootloader and fastboot kernel and reboot
If you have SDK or adb tools then open terminal and navigate to the folder, open cm10 zip and extract the boot image and place it in that directory, with you phone in fastboot, type fastboot devices to ensure you are connected and type fastboot flash boot boot.img it will state write time and ok, then try reboot again
hold down the power button until the phone shuts off, when it does, hold power and volume down to get to boot loader, press volume down to recovery and then press power, in recovery wip all and restore nandroid back up,,,hope you made a back up hope this helps
It's probably something corrupt in dalvik or cache, could also be a kernel mismatch but I think it's more likely phone was not properly wiped prior to flashing cmx
drlzanej said:
hold down the power button until the phone shuts off, when it does, hold power and volume down to get to boot loader, press volume down to recovery and then press power, in recovery wip all and restore nandroid back up,,,hope you made a back up hope this helps
Click to expand...
Click to collapse
Didn't make a backup, noob mistake. I've rooted phones before but this is my first one putting a custom rom on.
om4 said:
It's probably something corrupt in dalvik or cache, could also be a kernel mismatch but I think it's more likely phone was not properly wiped prior to flashing cmx
Click to expand...
Click to collapse
THANK YOU! IT WORKED!
mista_k said:
Didn't make a backup, noob mistake. I've rooted phones before but this is my first one putting a custom rom on.
THANK YOU! IT WORKED!
Click to expand...
Click to collapse
no problem just keep in mind that when switching roms, especially different bases (ics sense, aosp ics, aosp jb) wipe the dalvik and cache because they can easily be corrupted
om4 said:
no problem just keep in mind that when switching roms, especially different bases (ics sense, aosp ics, aosp jb) wipe the dalvik and cache because they can easily be corrupted
Click to expand...
Click to collapse
Sorry to hijack the thread but I am in the same situation.
Wiped Dalvik, Cache and even System...
But still, can't get pass the CMX boot animation.
Any suggestions?
Thanks
EdRF said:
Sorry to hijack the thread but I am in the same situation.
Wiped Dalvik, Cache and even System...
But still, can't get pass the CMX boot animation.
Any suggestions?
Thanks
Click to expand...
Click to collapse
S-on or s-off
You'll have to flash the kernel seperate if your s-on via fasboot or flash image gui
Sent from my EVO using xda premium
om4 said:
If you have SDK or adb tools then open terminal and navigate to the folder, open cm10 zip and extract the boot image and place it in that directory, with you phone in fastboot, type fastboot devices to ensure you are connected and type fastboot flash boot boot.img it will state write time and ok, then try reboot again
Click to expand...
Click to collapse
Following this step of the process fixed this same issue for me.
Thanks both (hut thanks button too )
I flashed via flashgui and also via fastboot.
Then flashed the rom.
But still stays in the boot animation.
Sent from my EVO using xda app-developers app
corcgaigh said:
S-on or s-off
You'll have to flash the kernel seperate if your s-on via fasboot or flash image gui
Sent from my EVO using xda premium
Click to expand...
Click to collapse
CaptinStabN said:
Following this step of the process fixed this same issue for me.
Click to expand...
Click to collapse
EdRF said:
Thanks both (hut thanks button too )
I flashed via flashgui and also via fastboot.
Then flashed the rom.
But still stays in the boot animation.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Hmm...well this time I just went to recovery. Made a backup and erased, cache, dalvik, system. Did a factory reset as well (didn't do that before) and in the end did as you guys suggested. Flashed rom and then boot.img via fastboot. Thank you very much!!! :victory:
Haven't been as active lately because I've been very sick but factory reset would have been my first suggestion. If you are starting a fresh install you should always wipe cache, dalvik, factory reset and then wipe system. I used to refer wipe scripts but for this phone there has been an unusually high number of users who's partitions (mostly internal sd) end up corrupt after using a wipe script. I don't know why, they are generally reliable and in most cases are better as they can wipe areas of the partitions that you miss wiping normally. If you are familiar with reformatting and you can back up internal regularly then you should try a wipe script. It's just a bit more convenient when it does work then manually wiping each partition.
Nothing works!
om4 said:
Haven't been as active lately because I've been very sick but factory reset would have been my first suggestion. If you are starting a fresh install you should always wipe cache, dalvik, factory reset and then wipe system. I used to refer wipe scripts but for this phone there has been an unusually high number of users who's partitions (mostly internal sd) end up corrupt after using a wipe script. I don't know why, they are generally reliable and in most cases are better as they can wipe areas of the partitions that you miss wiping normally. If you are familiar with reformatting and you can back up internal regularly then you should try a wipe script. It's just a bit more convenient when it does work then manually wiping each partition.
Click to expand...
Click to collapse
Okay so I did all of this and still..... doesn't work. I'm not really a phone wiz. I paid someone to root my phone before and I used the CM10 ROM, everything was fine until I tried to change my font, the phone rebooted and got stuck on the CM 10 boot screen. I went to recovery and restored my phone from September. I then went to Flash Image GUI and flashed the boot.img for CM!0. Then went into recovery and flashed CM!0 and gaaps and wiped the cache, delv cache, system and factory reset. When I rebooted I was still stuck on the boot screen. :/ I am able to restore back to September but my camera or wifi doesn't work. Anyone know how to help me?
Try flashing meanrom, it has the kernel installer and doesn't require flash image or fastboot. If you still have any issues with the camera then relock the bootloader and flash ruu. If that doesn't fix the camera then its most likely hardware failure.
flash gui image htc evo lte
I'm rooted s-on HTC evo 4g lte. I got the boot 2.09.
I downloaded flash GUI image. I backup my stock
ROM. Then I flash cm10.1 and everything worked
Fine. Now want to go back to my stock ROM.plz help
Me don't know how.........?????????????
SunnyDNuts said:
I'm rooted s-on HTC evo 4g lte. I got the boot 2.09.
I downloaded flash GUI image. I backup my stock
ROM. Then I flash cm10.1 and everything worked
Fine. Now want to go back to my stock ROM.plz help
Me don't know how.........?????????????
Click to expand...
Click to collapse
Flash the backup you made of your stock ROM.
Sent from my EVO using xda premium
I tried. It either says the file is to big or don't have the right file
I tried all the files on the backup
---------- Post added at 09:40 PM ---------- Previous post was at 09:15 PM ----------
FinZ28 said:
Flash the backup you made of your stock ROM.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I tried compressing the backup file so GUI would search for the
Kernel but it can't find the image
Bootloop Battery Issue
I recently flashed paranoid android to my verizon GS3 but after trying to boot I got stuck in a bootloop. It ran all last night but didnt accept a charge, and now won't turn on at all. When the battery is taken out and put back and then plugged back in it comes up with the battery charging symbol briefly but then immediately shuts off again. It wont turn on in download/recovery mode either. What should I do?
ross7alex said:
I recently flashed paranoid android to my verizon GS3 but after trying to boot I got stuck in a bootloop. It ran all last night but didnt accept a charge, and now won't turn on at all. When the battery is taken out and put back and then plugged back in it comes up with the battery charging symbol briefly but then immediately shuts off again. It wont turn on in download/recovery mode either. What should I do?
Click to expand...
Click to collapse
Do you have android sdk setup on your PC?
No but I can download it. Where should I find it?
---------- Post added at 05:27 AM ---------- Previous post was at 05:21 AM ----------
bigdaddy619 said:
Do you have android sdk setup on your PC?
Click to expand...
Click to collapse
Ok I found it and Im downloading it now. How will this help me?
So... I got my HTC One today and it's been a very difficult experiance. I am quite a newbie when it comes to rooting and such but I managed to unlock my bootloader (with the exception that it shows TAMPERED at the top) then proceded to flash TWRP through fastboot. TWRP wouldn't mount /data, /sdcard, etc... it wouldn't work. A little bit of searching led me to flash CWM instead and that seemed to work.
In CWM I wiped data/factory reset, then flashed SuperSU, then flashed CleanROM, then flashed BulletKernel, and finally reboot. Now I'm stuck in a bootloop and when I go to my bootloader and try to enter recovery it reboots, shows the CWM logo then reboots my phone. I tried re-flashing CWM via fastboot to no avail.
TL;DR: Phone is in bootloop and won't even boot into recovery
Any help would be much appreciated,
Thank you!
EDIT: Had a feeling it was due to the fact I didn't clear cache/dalvik cache before rebooting. I erased my cache via fastboot and voila it booted into recovery!
OrangeFever said:
So... I got my HTC One today and it's been a very difficult experiance. I am quite a newbie when it comes to rooting and such but I managed to unlock my bootloader (with the exception that it shows TAMPERED at the top) then proceded to flash TWRP through fastboot. TWRP wouldn't mount /data, /sdcard, etc... it wouldn't work. A little bit of searching led me to flash CWM instead and that seemed to work.
In CWM I wiped data/factory reset, then flashed SuperSU, then flashed CleanROM, then flashed BulletKernel, and finally reboot. Now I'm stuck in a bootloop and when I go to my bootloader and try to enter recovery it reboots, shows the CWM logo then reboots my phone. I tried re-flashing CWM via fastboot to no avail.
TL;DR: Phone is in bootloop and won't even boot into recovery
Any help would be much appreciated,
Thank you!
Click to expand...
Click to collapse
Boot into bootloader. Then do fastboot erase cache. Then try rebooting. If you can get into recovery but not ROM, reflash the ROM. If you can't even get into recovery still, try reflashing recovery. Fastboot flash recovery recovery.img. Then try getting into recovery and reflashing.
Sent from my HTC One
phositadc said:
Boot into bootloader. Then do fastboot erase cache. Then try rebooting. If you can get into recovery but not ROM, reflash the ROM. If you can't even get into recovery still, try reflashing recovery. Fastboot flash recovery recovery.img. Then try getting into recovery and reflashing.
Sent from my HTC One
Click to expand...
Click to collapse
Thank you!
I am have some issues booting any rom, i hav an unlocked bootloader, hboot 1.93.0003, emmc-boot and s-off with cwm touch recovery. I have tried with both speedrom and android revolution roms. They both instaled but they never boot up pass their boot animation screen, plz help
1st flash 4ext touch recovery using hasoon's AIO toolkit for amaze.
2) wipe /format
- wipe chache + delvik cache.
- wipe all partitions ( except sdcard )
3) install from zip.
- choose file to flash.
And then your Rom will work fine...
Hit thanks if I helped you !!! :thumbup::thumbup:
indigold said:
I am have some issues booting any rom, i hav an unlocked bootloader, hboot 1.93.0003, emmc-boot and s-off with cwm touch recovery. I have tried with both speedrom and android revolution roms. They both instaled but they never boot up pass their boot animation screen, plz help
Click to expand...
Click to collapse
Greetings from Florida,
Don't use Clockworkmod recovery, it's bad.
Use Hasoon's toolkit to flash 4ext. It's much better.
You also need to be Super CID and have the ICS firmware installed.
Once you have that settled, go into 4ext recovery by either holding volume down and power, and choosing recovery, or reboot from hasoon's toolkit's menu.
Choose format all partitions and then flash either ARHD or SpeedRom. I also made some Roms that you might want to try out.
Please press thanks if this helps.
Best regards.
Wipe that sucker!
Then update to ics!
Then do everything you did, all over again.