I am rooted (SuperCID 11111111 method), and s-off. I did not install any OTA's and i'm on stock kernal and ROM.
For my first custom ROM I want to install the ViperDNA ROM. Now that we have S-OFF, do we still need to install the "Stock DSB System Write Boot.img" Kernal? I could be wrong, but I believe that kernal is the same as stock but with system write capabilities which we can now do with S-OFF. Are there any other benefits to the DSB kernal that we may need for the ViperDNA?
Another small minor question while i'm at it: I haven't experienced any wifi issues, dose anyone recommend installing the new radios or anything else from the latest ota? Also should I wait for ViperDNA 1.2 or is it ok to start with 1.1?
Thank you in advance for your help. This is the first time I had to ask a question, I usually find what i'm looking for by reading the threads. I would have asked in the ViperDNA thread but this is my first post.
Thanks
I would do it just to be safe and I flashed the new radios and got faster 4g but only slightly faster
Sent from my ViperDNA infected with ViperBlue DNA
devilsaces said:
I am rooted (SuperCID 11111111 method), and s-off. I did not install any OTA's and i'm on stock kernal and ROM.
For my first custom ROM I want to install the ViperDNA ROM. Now that we have S-OFF, do we still need to install the "Stock DSB System Write Boot.img" Kernal? I could be wrong, but I believe that kernal is the same as stock but with system write capabilities which we can now do with S-OFF. Are there any other benefits to the DSB kernal that we may need for the ViperDNA?
Another small minor question while i'm at it: I haven't experienced any wifi issues, dose anyone recommend installing the new radios or anything else from the latest ota? Also should I wait for ViperDNA 1.2 or is it ok to start with 1.1?
Thank you in advance for your help. This is the first time I had to ask a question, I usually find what i'm looking for by reading the threads. I would have asked in the ViperDNA thread but this is my first post.
Thanks
Click to expand...
Click to collapse
DSB's Stock kernel is a part of the Viper ROM so no need to install separately. Installing new radio or the whole firmware is pretty much up to you. I have not received any faster data speeds with new one but some have. Also waiting for Viper 1.2 is also up to you, nits hinted that we may have it this weekend. It is an awesome ROM. The only thing with not waiting is that 1.2 will require a full wipe but if you are not opposed to taht like most of us flashaholics then go for it. You need to install 1.1.0 then there will be three small ota's that you will have to do one at a time to get to current 1.1.3.
Thanks for the quick responses. I might not have time to flash until this weekend anyway so maybe i'll wait for 1.2 just so I only have to wipe once. ViperDNA looks great, can't wait to mess around with it. I was a flashaholic with my Thunderbolt but I need to relax a little more with the DNA...Maybe.
devilsaces said:
Thanks for the quick responses. I might not have time to flash until this weekend anyway so maybe i'll wait for 1.2 just so I only have to wipe once. ViperDNA looks great, can't wait to mess around with it. I was a flashaholic with my Thunderbolt but I need to relax a little more with the DNA...Maybe.
Click to expand...
Click to collapse
lol, yeah. I think I flashed every rom there was for the Inc. and was doing same on DNA until Viper came out - it has everything. Can do as much or as little as you want with tweaks. Now I only flash when Viper has an update requiring one!
TJMac44 said:
lol, yeah. I think I flashed every rom there was for the Inc. and was doing same on DNA until Viper came out - it has everything. Can do as much or as little as you want with tweaks. Now I only flash when Viper has an update requiring one!
Click to expand...
Click to collapse
Yeah, I can't remember a ROM for the thunderbolt that had the same level of customization as Viper. TBolt ROMS went more in the direction of trying to get the latest sense roms, most felt unstable, or to get ASOP. I have my ASOP fix with my Nexus 7 now so I don't mind sticking with just sense based roms.
TJMac44 said:
DSB's Stock kernel is a part of the Viper ROM so no need to install separately. Installing new radio or the whole firmware is pretty much up to you. I have not received any faster data speeds with new one but some have. Also waiting for Viper 1.2 is also up to you, nits hinted that we may have it this weekend. It is an awesome ROM. The only thing with not waiting is that 1.2 will require a full wipe but if you are not opposed to taht like most of us flashaholics then go for it. You need to install 1.1.0 then there will be three small ota's that you will have to do one at a time to get to current 1.1.3.
Click to expand...
Click to collapse
I just flashed the new radio, planning on flashing ViperDNA this weekend.
After doing a little more research I came across this post:
http://forum.xda-developers.com/showpost.php?p=37535001&postcount=1
It turns out that there are 2 parts to a kernal, the kernal modules and the boot.img. I guess I DO need to flash the boot.img separately. The modules are already packaged with the ViperDNA Rom. Does this sound correct? When I was flashing ROMs with my TBolt I usually flashed different kernals separately so they were already together.
uppon2 said:
Keep in mind bootloader unlock will not work if you have done the latest OTA update without previously using supercid. See bootloader unlock guide below for more details.
3. You now need all required kernel files you are planning to use with the ROM you have selected. Now for the Droid DNA at the moment the kernel is broken down in to 2 parts. The first file is kernel modules and the second file is the the boot.img. Now whatever ROM you choose to download and install, it should already be using a specific kernel. When you flash a ROM the kernel modules will already be installed for the specific kernel the ROM is using.
For example If you listened to my advice and are going to use ViperDNA, this ROM already comes with the kernel modules required for the kernel it is using. The only thing that is left for you to do is download the second part of the kernel which is the boot.img file. Every kernel needs both the kernel modules and boot.img files to work 100% without fault, and every kernel has different modules and a boot.img that will only work for that specific kernel.
Each ROM should give you a download link for the required boot.img so just make sure to read the first few posts - If you are planning to use ViperDNA then it can be found on the first page post number 2 of the ViperDNA thread and it is named Stock DSB System Write Boot.img -
* If that wasn't already clear enough I would like to say that if you are download a complete kernel zip separately (which you can do) then you will get both files required. The first is the "already included in the ROM" kernel modules and the second file will be the boot.img - You can find all of the different kernels here - as you can see in this list the kernel included in ViperDNA is the one named "[KERNEL]Droid DNA Cubed Kernel Stock" - Once you have finished installing a ROM then I would recommend having a look at some different kernels if you want. Down the very bottom of this post I have included instructions on how to flash a kernel so please check it out.*
Click to expand...
Click to collapse
Related
I'm not really sure I understand and maybe someone can help me to, but the appeal of CWM to me was the ability to flash a ROM without needing a PC. However, most of the ROM's in the dev section say that a kernel flash is required and the utility requires a PC. The appeal of being able to flash a new ROM at any time is lost since I need to wait until I'm at home with my PC. If a kernel flash at the PC is required for most ROM's then why CWM at that point?
I'm realizing as I write this that the answer is likely that it's easier for a noob than adb. I still ask the question in the event there is something else I'm missing.
Also, before I get 30 hypersensitive replies about not appreciating the devs work and I should dev something myself if I don't like it please know that this is not intended to criticize the work of the devs. I'd just like to know if there is something I'm missing or maybe that I'm misunderstanding that a kernel flash is required when I read the releases.
BialyMurzyn said:
I'm not really sure I understand and maybe someone can help me to, but the appeal of CWM to me was the ability to flash a ROM without needing a PC. However, most of the ROM's in the dev section say that a kernel flash is required and the utility requires a PC. The appeal of being able to flash a new ROM at any time is lost since I need to wait until I'm at home with my PC. If a kernel flash at the PC is required for most ROM's then why CWM at that point?
I'm realizing as I write this that the answer is likely that it's easier for a noob than adb. I still ask the question in the event there is something else I'm missing.
Also, before I get 30 hypersensitive replies about not appreciating the devs work and I should dev something myself if I don't like it please know that this is not intended to criticize the work of the devs. I'd just like to know if there is something I'm missing or maybe that I'm misunderstanding that a kernel flash is required when I read the releases.
Click to expand...
Click to collapse
Yes! You missed this thread
All the latest roms are using Faux kernel anyways, Flash once, and then you can use CWM to flash any multiple roms you want
The ONLY time you NEED to flash a seperate kernel is when going to a totally different build. Examples:
Sense 3.0 to Sense 3.5
Sense 3.5 to Sense 3.0
ICS to Sense 3.0
ICS to Sense 3.5
Sense 3.0 to ICS
ICS to Sense 3.5
...etc
Other than that the kernel that you use is still pretty much stock.
rbaruch said:
All the latest roms are using Faux kernel anyways, Flash once, and then you can use CWM to flash any multiple roms you want
Click to expand...
Click to collapse
This is true, but each successive release says that a kernel update is needed. I am assuming that this includes not only those freshly flashing the ROM, but also those flashing from a ROM's previous version. Are they incompatible from version to version? Basically, if I'm bored while out and wanted to flash a ROM then flash the kernel later are there risks?
antiquezip said:
Yes! You missed this thread
Click to expand...
Click to collapse
This looks great! Since T-Mobile just throttled my data for the remainder of my billing cycle I will have to follow the thread and then give it a try later when I have WiFi. Thanks for the link.
Thanks Binary. That makes sense. No pun intended. So then the boot.img a dev includes with the packaged ROM is more or less a suggested kernel to best optimize their ROM and not that there are features of a ROM that will not work?
BialyMurzyn said:
Thanks Binary. That makes sense. No pun intended. So then the boot.img a dev includes with the packaged ROM is more or less a suggested kernel to best optimize their ROM and not that there are features of a ROM that will not work?
Click to expand...
Click to collapse
That depends on the kernel that the developer includes.
If it's a faux edition then there are a few tweaks however it's still stock.
All features should be accessable in the rom as long as you are using an unsecured kernel.
So I have been upgrading my ROM without realising I should probably upgrade my Kernel too. Just loaded up Devil Toast 0.7 and it works great, but since installing it I haven't been able to use my wifi. Started getting curious, and I noticed a lot of people have a different kernel than myself, and the last time I probably upgraded mine was when I installed CM7.
So my question is, where/how can I get a more up to date kernel? I did a few searches but I wasn't able to find solid answers. I really just want a nice stable kernel that works with Devil Toast.
are you CDMA or GSM? HTC just released the kernel source code the other day. So now the kernel devs can actually start making good kernels. AFAIK for CDMA the only kernel besides stock is the MAC kernel(see here). There might be a few floating around the Infected forums, but I'm not sure. Best bet right now is to probably run the kernel that comes with the rom, until the devs pump out some better kernels with more features(and more stable). Maybe post your WiFi problems in the DevilToast thread to see if someone has an answer?
netwokz said:
are you CDMA or GSM? HTC just released the kernel source code the other day. So now the kernel devs can actually start making good kernels. AFAIK for CDMA the only kernel besides stock is the MAC kernel(see here). There might be a few floating around the Infected forums, but I'm not sure. Best bet right now is to probably run the kernel that comes with the rom, until the devs pump out some better kernels with more features(and more stable). Maybe post your WiFi problems in the DevilToast thread to see if someone has an answer?
Click to expand...
Click to collapse
I'm CDMA with a kernel version is [email protected], and I've noticed a few of the people in the devil toast thread are running 3.0 versions of a kernel. So I'm guessing those people installed a different kernel than what the ROM carries? I might just do a complete wipe and see what happens, I just hate re-configuring everything. I was going to post on the DT thread but I can't since I haven't made enough posts on the boards. Tricky business.
The kernel in question is right here: https://github.com/htc-mirror/shooteru-ics-crc-3.0.16-e733189 but I have no idea how to go about grabbing it for my phone. I was never big on compiling my own code.
It seems like you are running toascfh's WiMAX build, correct? agrabren has had a 3.0 kernel for a bit now on DevilToast. What version are you running? Try installing the newest one(.7). I would recommend a full wipe though... the latest version has almost everything working sans 3D.
netwokz said:
It seems like you are running toascfh's WiMAX build, correct? agrabren has had a 3.0 kernel for a bit now on DevilToast. What version are you running? Try installing the newest one(.7). I would recommend a full wipe though... the latest version has almost everything working sans 3D.
Click to expand...
Click to collapse
Yeah, that's what I was running before. I just tried a full wipe and reinstalled 0.7 devil toast, but it didn't change my kernel. I'm guessing i'm missing a step or doing something wrong for my particular phone. I've got hboot 1.50 and I have successful root, but I've heard of hboot 1.50 causing fussiness, so maybe it's related.
I've been dropping into TWRP and flashing the ROM from there. Since I've got hboot 1.50, do you think I'll need use adp to push the ROM through? That's how I originally flashed toastcfh's mod, but when I tried to use adp to push CM9, it wasn't cooperating, so I just used TWRP.
Are you S-ON? I know alot of people have been having problems booting DT, one thing that seems to help is using 4ext recovery. You should try changing your recovery, you can always go back if it doesn't help or you don't like it. Just fyi, nandroids are not compatible between the two. Using 4ext, wipe all but SD card, then flash the rom, then wipe data again and you should be good to go.
netwokz said:
Are you S-ON? I know alot of people have been having problems booting DT, one thing that seems to help is using 4ext recovery. You should try changing your recovery, you can always go back if it doesn't help or you don't like it. Just fyi, nandroids are not compatible between the two. Using 4ext, wipe all but SD card, then flash the rom, then wipe data again and you should be good to go.
Click to expand...
Click to collapse
I was S-ON. I finallyyyyy got it working, but it was a hell of a pain. I ended up downgrading to hboot 1.40, which was a majority of the hassle. Then I got it to S-OFF. Once I got that going, I was able to get both the ROM and the Kernel to flash. I get to deal with a new issue, but the original problem of the Kernel not updating is fixed. It's now running 3.0.x very nicely.
Thanks for the help, I finally have my wifi back!
So I have been browsing around and have decided to flash the newest version of Sebastian's overclocked kernel. I am S-Off on the newest HBOOT currently running zhp's Vigor 1.1 on the latest ICS RUU.
I am assuming I just flash the zip provided (kernel) via recovery correct? Also, what programs do you guys use in order to tune the speed of the cpu's? Is it built into the kernel?
I have also been hearing that people get problems flashing the kernel straight up, and that they need to flash the stock kernel before hand then flash Sebastian's over that. Is this true?
Thanks in advance.
Answers
996 said:
So I have been browsing around and have decided to flash the newest version of Sebastian's overclocked kernel. I am S-Off on the newest HBOOT currently running zhp's Vigor 1.1 on the latest ICS RUU.
I am assuming I just flash the zip provided (kernel) via recovery correct? Also, what programs do you guys use in order to tune the speed of the cpu's? Is it built into the kernel?
I have also been hearing that people get problems flashing the kernel straight up, and that they need to flash the stock kernel before hand then flash Sebastian's over that. Is this true?
Thanks in advance.
Click to expand...
Click to collapse
Flash in recovery ( make sure not cwm, our phones dont seem to like that one too much, I would use Amonra for something as serious as a kernel, then switch back TWRP for fun), simple as that, i wipe cache and dalvik but heard that it was unnecessary. You wont lose anything if you do
I use incredicontrol by chad, but sebastians doesn't have fast charge built in. SO that option wont be available.
People get problems because they are s-on flashing it, you dont have to worry, make sure you dont have a ph98img stored on your sd card in case of trouble you can just go to recovery from hboot and flash a different kernel. and make sure u match the kernel with your rom of course, sense 4 , sense 3.6 , aosp , or whatever, i see your rom but i am making sure you understand you cant just slap a kernel that was intended for a different platform.
Changing voltage ABILITY is built in the kernel, but to harness it , you need an app , once again i like incredit kernel, i am hearing issues with setcpu, choose your flavor.
jmichaels1982 said:
Flash in recovery ( make sure not cwm, our phones dont seem to like that one too much, I would use Amonra for something as serious as a kernel, then switch back TWRP for fun), simple as that, i wipe cache and dalvik but heard that it was unnecessary. You wont lose anything if you do
I use incredicontrol by chad, but sebastians doesn't have fast charge built in. SO that option wont be available.
People get problems because they are s-on flashing it, you dont have to worry, make sure you dont have a ph98img stored on your sd card in case of trouble you can just go to recovery from hboot and flash a different kernel. and make sure u match the kernel with your rom of course, sense 4 , sense 3.6 , aosp , or whatever, i see your rom but i am making sure you understand you cant just slap a kernel that was intended for a different platform.
Changing voltage ABILITY is built in the kernel, but to harness it , you need an app , once again i like incredit kernel, i am hearing issues with setcpu, choose your flavor.
Click to expand...
Click to collapse
Thank you for your great response. I think this is for Sense 3.6. I will also try out incredicontrol and get back to you on that.
*EDIT
Where can I find out that this is for 3.6?
Edit:
To add to this it look like it will work on any ROM that has a unsecured boot.img. Now I haven't tested that..
Here you go
Edit : I would listen to zone ... lol he is awesome ...
Ah alright. Are you on this kernel zone?
*edit.
Thanks for the input on which firmware version this has to be run on.
Sent from my ADR6425LVW using xda premium
996 said:
Ah alright. Are you on this kernel zone?
*edit.
Thanks for the input on which firmware version this has to be run on.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Yes I am. It will run on 3.14 or 4.03 as long as you are flashing over a kernel that it unsecured.
zone23 said:
Yes I am. It will run on 3.14 or 4.03 as long as you are flashing over a kernel that it unsecured.
Click to expand...
Click to collapse
hmm. alright that sounds alright. How can I find out if the kernel is unsercured? I am running the stock kernel which was included with zhp's vigor 360 1.1
*edit.
found out that the kernel on vigor is unsecured.
Thank you for your help!
One more question. What setup are you guys running? ex: voltage levels and cpu levels?
sorry wrote this way too many times
996 said:
One more question. What setup are you guys running? ex: voltage levels and cpu levels?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=31267314&postcount=8
So starting yesterday my droid dna has been stuck in a boot loop. I just bought it about 5 days ago.
It was rooted and running supercharged HTC sense rom and stock kernal.
I tried everything I could find online.
I relocked bootloader and restored rom using the RUU exe that everyone links, I re-unlocked installed the rom again to see if that would work and it allowed maybe 2 full boots out of 100+ tries occasionally it booted up and had several crashes on the supercharged that included the custom AC!D sound mod adn the UI would lock up if I tried to make or answer a call. I tried re-restoring with the RUU. all fastboot commands worked fine with no error on restoring the bootloader and recovery etc.
NOTHING is working. Please help for the love of my brand new droid dna which has already boot looped...
Have you tried just restoring from your backup? The one you made before flashing the rom
And just curious. Did you dirty flash it? What recovery are you using?
Sent from my SuperCharged DNA
You're supposed to use the kernel that's supplied with the rom, not the stock kernel.
croppz said:
Have you tried just restoring from your backup? The one you made before flashing the rom
And just curious. Did you dirty flash it? What recovery are you using?
Sent from my SuperCharged DNA
Click to expand...
Click to collapse
I tried that and it didn't work, I don't think I dirty flashed as I wiped data.
orangechoochoo said:
You're supposed to use the kernel that's supplied with the rom, not the stock kernel.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=36676709
I didn't and don't see any kernal mention on this rom's post.
Egodeath said:
I tried that and it didn't work, I don't think I dirty flashed as I wiped data.
http://forum.xda-developers.com/showthread.php?p=36676709
I didn't and don't see any kernal mention on this rom's post.
Click to expand...
Click to collapse
There's a discussion in that thread about the developer including the kernel in the rom, doing that won't flash the kernel. It doesn't look like the instructions were updated to reflect that. Try Supercharged Hatka, made by the same developer along with Mustafa.
I managed to get it to boot up as stock with a 2nd relocking using fastboot oem lock and the RUU.exe. Haven't had any issues yet. I will see if anything goes wrong. Made a few calls and restored off gmail account.
Now that you got it running don't use that Rom this time, try Supercharged Hatka or Viper.
orangechoochoo said:
There's a discussion in that thread about the developer including the kernel in the rom, doing that won't flash the kernel. It doesn't look like the instructions were updated to reflect that. Try Supercharged Hatka, made by the same developer along with Mustafa.
Click to expand...
Click to collapse
I even asked the guy in the thread if the rom is stable on stock kernal and he stated that it was. I didnt read the whole thread but I didnt see anything about a kernal included. I know some are running cubed with it. Regardless, it worked fine on my device, I went back to stock just because Im looking to try out viper or hatka
Sent from my SuperCharged DNA
Maybe. There are so many boot.img files floating around things get mixed up and sometimes you forget what kernel you're running until you look at the About phone menu. It would be nice if they could be named appropriately.
orangechoochoo said:
Maybe. There are so many boot.img files floating around things get mixed up and sometimes you forget what kernel you're running until you look at the About phone menu. It would be nice if they could be named appropriately.
Click to expand...
Click to collapse
Now that I look, kernal definitely doesnt look stock but im just going off the name. Never looked before so I dunno what the name would have been.
Sent from my SuperCharged DNA
Yours looks stock. Covxx said he put DSBs kernel in the rom but it has to be flashed separately to apply it, therefore DSBs kernel is not flashed and you remain on the stock kernel. Dsb has his name in the kernel version when you look at About Phone.
orangechoochoo said:
Yours looks stock. Covxx said he put DSBs kernel in the rom but it has to be flashed separately to apply it, therefore DSBs kernel is not flashed and you remain on the stock kernel. Dsb has his name in the kernel version when you look at About Phone.
Click to expand...
Click to collapse
Gotcha. Thanks man.
Sent from my SuperCharged DNA
I recently picked up a GP 4.2. I immediately got it rooted so now I'm running a 2.3.6 stock rom with root. What's the next step in terms of getting a recovery installed and maybe moving up to an ICS or JB rom? I've kind of poked around a bit but it's some what confusing with all the other types of GPs in the same area. Does anybody have a recovery and rom they'd recommend? Is using rom manager to push CWM feasible?
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
MetaMav said:
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
Click to expand...
Click to collapse
Thank you for the info Meta. I'm somewhere around the mid-high mid level with flashing and rooting but slogging through trying to find the right info for a GP 4.2 was getting a bit hectic. I think part of it was the way some people abbreviate the model compared to others. I just wanted to make sure I didn't brick the device.
I got it mainly for a perm, in-car music and GPS/navigation provider instead of always looking to my phone to do it. One thing I noticed about the rom, it mentions installing it via CWM. If I don't have CWM yet, can this rom get pushed by odin or do I have to get CWM first and then flash the rom?
NapalmDawn said:
Thank you for the info Meta. I'm somewhere around the mid-high mid level with flashing and rooting but slogging through trying to find the right info for a GP 4.2 was getting a bit hectic. I think part of it was the way some people abbreviate the model compared to others. I just wanted to make sure I didn't brick the device.
I got it mainly for a perm, in-car music and GPS/navigation provider instead of always looking to my phone to do it. One thing I noticed about the rom, it mentions installing it via CWM. If I don't have CWM yet, can this rom get pushed by odin or do I have to get CWM first and then flash the rom?
Click to expand...
Click to collapse
you should flash CWM via odin first and then flash the ROM via CWM
Would the instructions here be the right thing to do?
http://www.youtube.com/watch?v=-MbHDbjph8A
MetaMav said:
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
Click to expand...
Click to collapse
Do you know if CM will come to the 3.6 as well? And from what I understand, to get CWM on the 3.6 you have to flash a custom kernel?
NapalmDawn said:
Would the instructions here be the right thing to do?
http://www.youtube.com/watch?v=-MbHDbjph8A
Click to expand...
Click to collapse
Yes. Those instructions are correct. However, you do not need to run the adb dev tool like the person does in the beginning of video in order to boot into download mode. You can just hold the power, home, and down-volume button to boot the phone into download mode before using Odin. Zaclimon's CWM kernel can be found here (along with the wifi fix): http://forum.xda-developers.com/showthread.php?t=2198444 and installed with the instructions in the youtube video.
Xenphor said:
Do you know if CM will come to the 3.6 as well? And from what I understand, to get CWM on the 3.6 you have to flash a custom kernel?
Click to expand...
Click to collapse
From what I have read I know that SerkTheTurk is currently compiling CM for the 4.2. I would imagine either him or some other 3.6 dev will take up the task of CM for your device. And, the answer to your second question is yes, you do have to flash a custom kernel similar to how the 4.2 requires a custom kernel.
Hope that helps.
MetaMav said:
Yes. Those instructions are correct. However, you do not need to run the adb dev tool like the person does in the beginning of video in order to boot into download mode. You can just hold the power, home, and down-volume button to boot the phone into download mode before using Odin. Zaclimon's CWM kernel can be found here (along with the wifi fix): http://forum.xda-developers.com/showthread.php?t=2198444 and installed with the instructions in the youtube video.
From what I have read I know that SerkTheTurk is currently compiling CM for the 4.2. I would imagine either him or some other 3.6 dev will take up the task of CM for your device. And, the answer to your second question is yes, you do have to flash a custom kernel similar to how the 4.2 requires a custom kernel.
Hope that helps.
Click to expand...
Click to collapse
Ok thanks. I also have a question regarding flashing kernels. In the linux world (and other os world), randomly changing your kernel is a big no no that would lead to major compatibility issues. I don't understand how people can mix and match kernels, roms, firmware, bootloaders, recoveries and everything else? There won't be conflicts?
Regarding the kernel available for the 3.6: what do I do if I encounter stability issues with it and, say, the upcoming CM7? I wouldn't be able to go back to my original kernel because I didn't have CWM to back it up in the first place. Won't I be stuck with a potentially faulty kernel?
Xenphor said:
Ok thanks. I also have a question regarding flashing kernels. In the linux world (and other os world), randomly changing your kernel is a big no no that would lead to major compatibility issues. I don't understand how people can mix and match kernels, roms, firmware, bootloaders, recoveries and everything else? There won't be conflicts?
Regarding the kernel available for the 3.6: what do I do if I encounter stability issues with it and, say, the upcoming CM7? I wouldn't be able to go back to my original kernel because I didn't have CWM to back it up in the first place. Won't I be stuck with a potentially faulty kernel?
Click to expand...
Click to collapse
In changing kernels in the android world, you have mixed results. There are times a kernel can cause some issues but for the most part (we're talking like 98%), if an XDA dev posts a kernel and lets you know you can use it, you can trust it. These devs no matter the device spend painstaking hours ironing things out. Also, many of them have a select group of people testing the kernel for faults and issues. In a very active community, if a well known dev posts a kernel, you can trust it. HOWEVER...no matter what we think or believe or what we're told, every device is a unique and beautiful snowflake. Back up back up back up BACK UP BACK UP BACK UP your stuff. If you want to be super ULTRA safe, take the back up and download it to your PC or somewhere safe.
NapalmDawn said:
In changing kernels in the android world, you have mixed results. There are times a kernel can cause some issues but for the most part (we're talking like 98%), if an XDA dev posts a kernel and lets you know you can use it, you can trust it. These devs no matter the device spend painstaking hours ironing things out. Also, many of them have a select group of people testing the kernel for faults and issues. In a very active community, if a well known dev posts a kernel, you can trust it. HOWEVER...no matter what we think or believe or what we're told, every device is a unique and beautiful snowflake. Back up back up back up BACK UP BACK UP BACK UP your stuff. If you want to be super ULTRA safe, take the back up and download it to your PC or somewhere safe.
Click to expand...
Click to collapse
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Xenphor said:
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Click to expand...
Click to collapse
Just flash the cwm kernel because its basically the stock kernel but with cwm, and it shouldnt brick but if it does you can flash the stock kernel back again
Sent from my YP-GI1 using Tapatalk 2
SerkTheTurk said:
Just flash the cwm kernel because its basically the stock kernel but with cwm, and it shouldnt brick but if it does you can flash the stock kernel back again
Sent from my YP-GI1 using Tapatalk 2
Click to expand...
Click to collapse
Where could I find a stock kernel?
Xenphor said:
Where could I find a stock kernel?
Click to expand...
Click to collapse
US version: http://forum.xda-developers.com/showthread.php?t=1885374
International: http://forum.xda-developers.com/showthread.php?t=1884071
Sent from my YP-GI1 using Tapatalk 2
SerkTheTurk said:
US version: http://forum.xda-developers.com/showthread.php?t=1885374
International: http://forum.xda-developers.com/showthread.php?t=1884071
Sent from my YP-GI1 using Tapatalk 2
Click to expand...
Click to collapse
Ok thank you. However, will this work with YP-GS1?
But about kernels, on the webpage where I downloaded the stock rooted rom http://tau.shadowchild.nl/attn1/?p=166 it says specifically that the Wifi module in system and kernel must MATCH. This is what I'm talking about in regards to kernel compatibility with roms. How do I know if a kernel I'm downloading will have changes applied to it that will work with another rom like with this stock rom/kernel?
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
NapalmDawn said:
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
Click to expand...
Click to collapse
Well I had to flash this kernel http://forum.xda-developers.com/showthread.php?t=2198234 to get CWM on mine. I haven't actually flashed anything with CWM because there doesn't seem to be any good roms for the 3.6 unless CM7 comes out sometime. I used Odin to flash a stock rom from here http://tau.shadowchild.nl/attn1/?p=166
NapalmDawn said:
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
Click to expand...
Click to collapse
Poop. I think I bootloped the sucker. I can use Odin to reflash the stock, rooted rom just like I did when I got it first rooted right? Do we have another rom for the 4.2 I could try flashing? Not sure why it has bootlooped. I even went back into CWM, did a factory reset, flashed only the rom (no addons) and same thing. Possible bad download? It is flashing from the internal SD as my CWM is not seeing my external SD.
NapalmDawn said:
Poop. I think I bootloped the sucker. I can use Odin to reflash the stock, rooted rom just like I did when I got it first rooted right? Do we have another rom for the 4.2 I could try flashing? Not sure why it has bootlooped. I even went back into CWM, did a factory reset, flashed only the rom (no addons) and same thing. Possible bad download? It is flashing from the internal SD as my CWM is not seeing my external SD.
Click to expand...
Click to collapse
I have been meaning to post this on the dev thread for awhile. I thought this problem might only be for certain people but I think it applies to US and maybe non-EU devices. I believe that the ChaOS ROM will bootloop on US (YP-GI1/XAA) devices if you do not install ChaOS's Enhanced Stock ROM (http://forum.xda-developers.com/showthread.php?t=2279450) for whatever reason. I spent days trying to install his ROM and bootlooping.
The way I successfully installed (if I remember correctly):
-Do a factory reset of rooted stock ROM
-Boot to CWM (meaning you have already flashed the custom kernel) and install ChaOS's Enhanced Stock (put all install files on internal SD)
-Boot to CWM, wipe davlick cache under "advanced", wipe cache partition, and install the ChaOS ROM
-Wait a little while and your device should boot up properly
I hope this works for you. If it doesn't let me know and I can help you further. If this does work for you too then I will post this on the ROM's thread for other users.
Xenphor said:
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Click to expand...
Click to collapse
SerkTheTurk said it very well, you do not need to worry, but if you also want to do a backup before you install the custom kernel you could use the adb tools on the computer to backup the device. I'm sure you could learn how to do that with a quick Google search.
MetaMav said:
I have been meaning to post this on the dev thread for awhile. I thought this problem might only be for certain people but I think it applies to US and maybe non-EU devices. I believe that the ChaOS ROM will bootloop on US (YP-GI1/XAA) devices if you do not install ChaOS's Enhanced Stock ROM (http://forum.xda-developers.com/showthread.php?t=2279450) for whatever reason. I spent days trying to install his ROM and bootlooping.
The way I successfully installed (if I remember correctly):
-Do a factory reset of rooted stock ROM
-Boot to CWM (meaning you have already flashed the custom kernel) and install ChaOS's Enhanced Stock (put all install files on internal SD)
-Boot to CWM, wipe davlick cache under "advanced", wipe cache partition, and install the ChaOS ROM
-Wait a little while and your device should boot up properly
I hope this works for you. If it doesn't let me know and I can help you further. If this does work for you too then I will post this on the ROM's thread for other users.
SerkTheTurk said it very well, you do not need to worry, but if you also want to do a backup before you install the custom kernel you could use the adb tools on the computer to backup the device. I'm sure you could learn how to do that with a quick Google search.
Click to expand...
Click to collapse
ell there's not really much point in backing up the kernel when I've already downloaded it on my computer.
I've since flashed KingOS rom and don't really notice any differences at besides a few color changes... what's all the hype about?
Xenphor said:
ell there's not really much point in backing up the kernel when I've already downloaded it on my computer.
I've since flashed KingOS rom and don't really notice any differences at besides a few color changes... what's all the hype about?
Click to expand...
Click to collapse
Xen-it seems GPlayer development is still fairly newish. the work you see from devs now are all ground work. For the 4.2 and 3.6, they seem a little less dev populated than the 4 and 5. People will build upon the work of early devs and eventually get kernels that can OC and maybe ICS and JB roms. At this stage, we likely won't see anything like ZOMG earth shattering until people spend time with the devices. Seems Serk is on his way to doing the best he can for 4.2 but I am not sure who is tackling 3.6
It's weird how roms for devices go. I learned this when I had a tbolt and shockingly saw a FUNCTIONAL JB rom for my old Eris while the tbolt was still hanging back in ginger land with not even a really good ICS rom let alone JB. I asked the Tbolt community-why? How is it the dinosaur Eris has JB and not us? It all depends on what the devs can do with the sources provided. Sometimes certain hardware points are sticky. you can have beautiful JB rom for a device that can't talk to the camera if the hardware source isn't made available (reference the HP TP for many years)
For now, flash what you're comfortable with and and learn what you do and don't like. Also learn if you want to play things safe and not experiment or take on potentially beta builds. For the tbolt, tackling an ICS rom was too dicey so I never did. On my new Rezound, I eat up JB roms as they are in much better shape