Hey guys,
my problem is, that the Display of my SE XPERIA RAY sometimes turn black.
It´s not regularly! It happen from time o time. Sometimes, while the phone lies on the table or something and it ever will turn off if i do a call and hold my Phone next to my Ear (it´s something with the proximity-sensor probably i think)
My Display-Timeout is set to 30minutes, but i think that´s not relevant, or i´m wrong ?!
I found out, if i use ADB and send the KEYCODE_ENDCALL with "adb shell input keyevent 6" to the Phone, the Result will be the same!
The Display turns off!
But if you Press the ON/OFF-Button you can unlock the Phone! There´s full functionality of the Screen! You can do every Action you want, but you don´t see it ( cause of this i use screencast to control the Phone... but, as you certainly know, it´s not pretty cool with 4-5 fps (
I really hope you can help me! This Ray is actually my only usable Phone (
I had want to post the "dumpsys power"-informations, but can´t find it yet.
what i have noticed, is, that if the Display works correct the "mUserState" is set to 3 and while Display is not working correctly it is set to 0.
But i don´t know if this is relevant.
thx in advance
What ROM did you use?
and what kernel?
if you're about stuck at those problem , try flashing fresh firmware for your device
Android-Version: 2.3.3
Baseband-Version: 8x55A-AAABQOAZM-20302204-36
Kernel-Version: 2.6.32.9-perf
Build-Nr.: 4.0.A.2.368
Related
Hello all,
I'm new here, have read lots of the information available, but came here looking for an answer that I haven't found yet.
Situation is the following.
I got this Qtek2020 (or XDA II) from my dad who used it for his work. The reason he stopped using it is because the "phone" function itself is kind off acting weird.
Sometimes it is just nog possible to get into phone mode, neither of the two methods make te device display the dial pad...
- hitting the green button
- going Start-> phone
(It's kind off like a non responding program in windows when you want to execute it)
To make things clear, the phone works fine if we go to contacts and then choose the option to call the contact.
The question is, does this problem seem familiar and is there a way to fix it by for example putting a new rom on the device?
Any help or input about this is greatly appreciated.
Thanks in advance
I think the HARD RESET should help . After a long... long work configuration data and other settings going to be ... melted . If U don't store on devise impotrant data just remove the battery for about 20 mins .
Hi,
I have searching a bit and haven´t seen around anything similar. Today I set the countdown in mi s2, and when it finished I was about to stop the sound and the screen was loocked, but the keypad to unlock was missing some numbers!! One of them belonged to my password! So I couldn´t unlock it.
Not sure if it is about the countdown only, but never happened before. Today to being able to use it again I had to restart the phone (remove battery).
I attach here the screen capture. I tried to rotate the phone but nothing else appeared, also to make zoom, but neither...
Have this happened to any of you? Is it something to fix it?
I am using 2.3.3, kernel: 2.6.35.7-I9100BGKF5 (original kernel from Movistar Spain updated through Kies yesterday)
(Is there a way to write requests in the development threads without reaching the 10 posts in "normal" sections? I want to root this version, but haven´t found the original kernel...) Sorry for mixing two different issues.
Thanks in advance!
Hello ... the slide for open in the lock screen goes bad in my xperia neo :S It doesnt goes smooth as it should go .... any help?
i am trying to root the device now (i have downloaded version and it continues the same) i hope that it works when i upgraded version from here ......
the better way i think u should try another ROM cook ( CM7 or any ROM ... ) so it's changing the lock type ! try to clean your screen ! sometime i got the same problem with my Mt15i
Is it only when charging? If you use an aftermarket charger, the touchscreen can go mad.
If it's happening when you're charging the AC adapter, but not the PC, it's just the adapter. I never had this issue until I got Xperia phones. Never happened on my G1.
it happens when i want to talk with people ... when i want to start the movile after being with screen in black and i touch the button to start on .... :S
and the same happens when somebody calls me and i want to answer .... perhaps i am too bad with my finger? :S when my sister wants .... i will post the video in youtube.
i dont want to change the rom for calling for the warranty .... if it is a warranty thing :S
thx
this is how the slide works .....
youtube.com/watch?v=WjhSdDIe2oI
I have installed the widgetlocker ... and it is almost the same ..... soemtimes works better than the natural one
If you've rooted the phone (i didn't quite understand from the OP) and you're using setCPU or something similar, make sure you haven't set the MHz too low on a ScreenOff profile. I had that happen to me sometimes until a raised it a bit.
Download Sony Ericsson Update Service and choose repair current installation.
it has fixed alone :S at least now it works perfectly without resetting :S
the only thing xtrange i have done is to install the widget locker and it has detected that it is unregistered he has "autoremove" and now ... it works perfectly ......
what xtrange thing :S i hope not to hapen it again :S
Hello every body, I'm Lucas from Argentina. I hope you can help me.. Sorry if my english is bad
I have the Sony Live with Walkman WT19a and.. everything worked good but slow.. So I decided to make a reset from the Android (not recoveries).. I HAVE ROOTED STOCK ROM
The first problem comes here... When I try to press the button Home I see that is detected (if the screen is blocked.. when I press this button the phone gets unblocked) BUT it doesn't work properly. I mean, when I'm in an app and I press Home... nothing happens..
Then I release that I can't answer the incoming calls. I just get informed that someone called me but I never could answer any call because the phone simply doesn't warn me.
The camera doesn't work..
I tried to flash it with Fashtool but it never gets into flashmode..
What can I do?
Hello!
I recently switched to the m4 from my trusty LG OG, an it is perfect except for one thing... it doesn't ring.
I have tried all Sony-solutions, including PC software repair, etc... but no joy. My wife also has an M4 and has the same problem.
It is worked-around by using a 3rd party lockscreen (I use Hi-Locker), which is awesome.. but not ideal due to security problems, most notably Android Pay.
My question?
Can I replace the lockscreen at the ROM level? Can I replace the basic function with maybe a lockscreen from the Z5?
Unless someone knows how to fix this
I have never compiled my own rom, but I have a reasonable level of tech-savvy. I can flash ROMS and do work in Linux.
I have rooted and unlocked my bootloader, and I am using Stock Sony ROM
I have the latest firmware
Kernel 3.10.49
build 26.1.A.2.99
I have NOT tried using an old firmware- or an alternate ROM. I probably will, but my wife doesn't love the idea for her. Thus, I would like to work out a precision fix.
My thoughts?
Idea 1. find where the stock lockscreen/security module lives.. and try and replace with something from a different phone.
Possible?
Thank you for reading.. I know some other people have these problems, as I read them in threads here.. but I didn't find much in the way of fixing.
just for reference- THIS is the problem.
just for reference- THIS is the problem.
Mustang243 said:
My phone doesn't ring when it 's locked. If phone is unlocked ringtone rings and vibrates. When it's locked no sound or vibrate. Whatsapp messages vibrate but they have no notification sound. I have checked all the settings, volume is up. Last resort is factory reset but i'm not there yet. I don't wanna lose all my settings.
E: Okay I used Sony PC Companion and used the Fix phone/tablet -thing and it downloaded the firmware and installed it so I think it reset my phone. Still my phone doesn't ring if its locked. If I press the power button when someone is calling to me, I can see the lockscreen notification on the screen but it doesn't ring or vibrate. FFS. Any ideas guys?
E2: I guess I find a solutions. Or a temporary solution. I noticed that if I disabled the screen lock, my phone would ring and vibrate normally. So I decided to try and download "Next" lockscreen app. Guess what. When I use it, my phone works perfectly. I don't know why it stopped ringing because there wasn't any new updates from Sony but it's clearly problem in Sony's software.
Click to expand...
Click to collapse
Mustang243 said:
I still have the "silent phone" issue with this update. I have to use third party lock screen app. If I use Sony's lock pattern or pin code and use my gf's phone to call my phone: screen doesn't wake, no ringtone can be heard and no vibration. When I press power-button I can see that someone's trying to call me. Anyone else experiencing this problem? I hope you understand what I tried to say, the issue is kinda hard to explain.
Click to expand...
Click to collapse
Yeah this is a huge problem and we're not the only ones suffering from it. Now I use CM Locker because Next drained my battery. I also noticed that my phone works fine if I boot on safe-mode. Still haven't figured it out which app causes the problem. Gotta wait for the 6.0 update and hope that fixes things.
Same issue with out-of-the box...
Well, have M4 'out of the box' - meaning - no custom software installed, no customized ROM, no custom lock-screen... and well - to make the ring work back I have to restart phone every few days (as soon as realize that it's not working) - oh Sony, what should I say ....