Hi Guys I've looked at loads of other related posts for this but nothing seems to be the same as mine, let me try and give you a bit of background on this it wont be perfect as it is my sisters phone and she doesn't know anything. my sister left her original charger at her boyfriends and therefore had to use a cheaper non-stock one she had. Every-time she used it her phone would play up do things like open the car mode and keep rebooting, she didn't think much of it and used it anyway. Her phone died (ran out of battery) one evening and she used the strange charger to charge her phone overnight this however seems to have caused issues since then it wont boot it goes past the Samsung boot screen then the o2 boot screen then just repeats (sounds like a boot loop) note the phone has never been rooted and is still 100% stock.
So this is the issue I figured using ODIN and flashing the stock firmware would fix the issue but I cannot for the life of me get the phone to pick up on ANY computer at all I've tried different charger cables, different computers, Different OS's, cleaning the port and pretty much everything else the internet has currently had to offer. I really am at a loss here I cant use recovery as its not rooted I cant use something like Kies Air or mobile odin as I cant boot into the room and using ODIN is im unable to connect to any computers.
So I guys I'm reaching out to you here what can I do to fix this I really need some advice :laugh:
Thanks in advance.
Say hi to your sister for me.
Oh and her battery must be dead because of the charger.
Usb port could also be busted.
Get another fully charged battery and check it out.
PS: I didn't even read the thread.
Sent from the little guy
gastonw said:
Say hi to your sister for me.
Oh and her battery must be dead because of the charger.
Usb port could also be busted.
Get another fully charged battery and check it out.
PS: I didn't even read the thread.
Sent from the little guy
Click to expand...
Click to collapse
Battery seems to work fine, it charges in the computer fine and i tried my mates s2 battery and it was still in the same situation :silly:
Let me read the thread then
Done.
Change usb port, it's busted.
If in warranty...well have them take a look at it.
Sent from the little guy
gastonw said:
Let me read the thread then
Done.
Change usb port, it's busted.
If in warranty...well have them take a look at it.
Sent from the little guy
Click to expand...
Click to collapse
No shes had it since launch so its way out, also if it charges would that not mean its working?
Different conectors.
Warranty is for 2 years mostly....
Sent from the little guy
Do you think there is anything else I can try I don't want to jump directly into replacing parts/handset.
If it's a hardware fault, not much while you can do other than change the part. The part itself is cheap, isn't even hard to swap it out
Sent from my GT-I9100 using xda app-developers app
Related
Alright so my Vibrant won't charge. I JUST recovered my phone from a brick, (I was having issues with the battery life on Slim Roms 4.0 compared to 3.9--in the middle of flashing back I accidently wiped my internal memory. As I was recovering it using Odin, my fat cat jumped on my bed and caught on my phone cord bricking it.) Flashed using Heimdall and was able to get my phone into working order.
Now, I placed Slim Roms 4.0 back on my phone initially after the unbricking to have something working on it, even though the battery life less than impressed me.
So I charged it like normal yesterday, got it to 100% and was fine and dandy with it working. (Still sucking up battery life like a vampire in a fat camp.)
So the update 4.1 went live yesterday, I flashed it immediately to that. The battery life was amazing! So I do the normal thing when I flash to a new ROM. Let it die completely before charging it completely. It's now dead and will not charge.
Symptoms;
I plugged in my normal cable for work (a cheap cable I purchased off of Ebay.) And up comes the round loading symbol. Followed by a darkening of the screen, followed by nothing.
One thing to note, is while it has it's loading circle on, the bottom buttons light up when I touch them.
My Steps;
-I attempted different USB ports since I charge through my work computer. No luck.
-I "borrowed" my co-workers USB cord and USB to wall plug. Attempted the new cable in the computer first. No luck.
-Plugged the borrowed USB into the wall charger. Same thing happens.
-Used my own cheapy cable in wall charger. Same thing.
-Took co-workers complete set and plugged it in in a different room. Nothing.
-Took out my battery, plugged in USB, placed battery back in. Nothing.
-Hold down the Vibrant buttons to get into Bootloader, it resets the loading circle and nothing more.
So now I'm sitting here wondering what to do. I do not have rubbing alcohol readily available, however since it charged to 100% yesterday I do not believe that is the issue, but I'd be willing to try if I had access.
Something you should know, I am using a Samsung Epic 4G battery in my phone.
-For those who might judge saying it is dumb, I have gotten 54 hours out of that battery on one ROM before, that is with texting, talking on the phone and installing apps. I'm fond of this thing, however I have my stock battery at home still.-
Any suggestions you guys have would be appreciated. I have tried things that I found on this forum and basic tech support to no avail. (I am at work so the things I can use are fairly limited. However cords are of no shortage.)
Alright, I unplugged my phone from being plugged into the wall charger for an hour and 3 minutes later it decides to turn itself on.. Not sure what's going on but I'm not going to complain.
So my question now is, can anyone explain this or help prevent this in the future?
From what I've heard draining a battery until it dies can damage it. But, I'm not an expert on that. It's possible that the battery needed more time to recover from the drain.
rmelendez3 said:
From what I've heard draining a battery until it dies can damage it. But, I'm not an expert on that. It's possible that the battery needed more time to recover from the drain.
Click to expand...
Click to collapse
Really? I was always told it prolongs battery life. Now I need to research this! Thank you.
knoka said:
Really? I was always told it prolongs battery life. Now I need to research this! Thank you.
Click to expand...
Click to collapse
I had something similar happen when running lithium volt ROM. My battery completely died and the phone cut off (obviously.) I plugged it in the charger and it immediately tried to boot the phone up but it was bootlooping at the startup screen. I let it sit there for 20 minutes or so thinking maybe it is charging but as soon as i unplug the charger the phone cut off. Luckily I have an extra battery, popped it in, flashed a new ROM thinking that was the problem, turns out it was something to do with the ROM(maybe it needed a certain amount of battery power to boot up). My completely dead battery worked on the cm7 ROM I flashed, plugged in the charger and it booted up normally and started charging.
Sent from my SGH-T959 using XDA Premium App
iTz KeeFy said:
I had something similar happen when running lithium volt ROM. My battery completely died and the phone cut off (obviously.) I plugged it in the charger and it immediately tried to boot the phone up but it was bootlooping at the startup screen. I let it sit there for 20 minutes or so thinking maybe it is charging but as soon as i unplug the charger the phone cut off. Luckily I have an extra battery, popped it in, flashed a new ROM thinking that was the problem, turns out it was something to do with the ROM(maybe it needed a certain amount of battery power to boot up). My completely dead battery worked on the cm7 ROM I flashed, plugged in the charger and it booted up normally and started charging.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
Oh so it could be ROM related? :/ That makes sense considering I just installed a brand new ROM. Thank you!
knoka said:
Oh so it could be ROM related? :/ That makes sense considering I just installed a brand new ROM. Thank you!
Click to expand...
Click to collapse
Yea it could be ROM related but it also could be a number of other things. Hopefully flashing a new ROM will fix the issue.
Sent from my SGH-T959 using XDA Premium App
iTz KeeFy said:
Yea it could be ROM related but it also could be a number of other things. Hopefully flashing a new ROM will fix the issue.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
Thank you. I might just have to downgrade back to 3.9. It's almost a shame. xD
I'm going to test my old battery in this ROM just to make sure before I downgrade.
You need to use your Samsung usb charger, and wall adapter only. These two are the only ones that will actually work. I had this same problem and realized it was because I wasn't using the Samsung stuff. Even when pugging into the computer, use the Samsung USB cabe only. As for the battery your using... I wouldn't recommend it, no matter the fantastic battery life you must be getting.
whatiznt said:
You need to use your Samsung usb charger, and wall adapter only. These two are the only ones that will actually work. I had this same problem and realized it was because I wasn't using the Samsung stuff. Even when pugging into the computer, use the Samsung USB cabe only. As for the battery your using... I wouldn't recommend it, no matter the fantastic battery life you must be getting.
Click to expand...
Click to collapse
Daw it's a fellow Samsung battery.
Thank you about the cable, I need to purchase another one anyways, mine at home seems to not be connecting very well. :/
ROM. some roms do that. it will not let you power up while charging if the battery is very low. you will get the circle and the battery symbol after. sometimes you still cant unless you pull the battery. happened to me many times
Hi Everyone,
After doing a deep search i did not find the exact problem I have.
Specs:
Phone: SGS2 i9100
ROM: CM10 Nightly 08.09.2012
Kernal: CM Stock
You can see the symptoms of my problem in the video I found below (it wont allow me to paste link with less than 10 posts so i shortened the URL)
youtube.com/watch?v=BCyp1iCTW2M
This is what happened:
1. I had an Adapter from Car Outlet to USB so i connected my phone using it but it seemed they did not like each other.
The phone was stuck on a black screen so I restarted it and noticed I lost 40% battery in those few minutes, looking at BBS i saw the RIL wakelock so decided its just a coincidence and i'll let the battery drain all the way to calibrate it at night (the phone worked perfectly fine)
2. After the battery was fully drained I connected it to the PC to charge and turned it on and everything was fine, noticed it was at 0% so after a few minutes it turned off, after doing it a couple of times i let the phone charge "turned off" (thought maybe its low voltage of PC charge) through the whole night
3. at morning it did not charge at all, I managed to "almost" turn the device on but now the battery is really drained so i cant even do that
4. when i tried going into download mode (just to see if my phone is OK) i managed, when i am trying now i get "Battey is to low, cannot download"
5. I cant get into recovery mode, but i tried it after all the process above so its probably because of low battery
6. I tried it on 2 diffrent batteries (unfortunately my old one was also drained before)
- Anker 1900
- Original Samsung 1650
I am going to get an AC charged and try using it.
Any Ideas what should i do or what the problem is ?
Thanks in advance!
Ariel.s said:
...
I am going to get an AC charged and try using it.
Click to expand...
Click to collapse
This is the way to go. First make absolutely sure the battery is charged, if possible by testing it in another device. With a fully charged battery it should be possible to find out if your phones hardware is still fine, especially the charging board.
fxrb said:
This is the way to go. First make absolutely sure the battery is charged, if possible by testing it in another device. With a fully charged battery it should be possible to find out if your phones hardware is still fine, especially the charging board.
Click to expand...
Click to collapse
Hi,
Thanks for the reply!
So far i got an AC charger for the phone (not a battery only cradle charger kind of thing) but getting the same problem.. it just wont charge the battery through the phone..
I'll try to get a fully charged battery to give feedback that the phone is fine and not bricked in any way as i mentioned before.
If everything is fine i'll see that the battery is chargeable when not completely dry and we'll be smarter after that.
in case it really became unchargeable and it is a problem in the charging board as you mentioned
Could you please expand on the functionality of the charging board ? and whats the process for fixing/replacing it ?
Thanks in advance!
Ariel.s said:
Hi,
Thanks for the reply!
So far i got an AC charger for the phone (not a battery only cradle charger kind of thing) but getting the same problem.. it just wont charge the battery through the phone..
I'll try to get a fully charged battery to give feedback that the phone is fine and not bricked in any way as i mentioned before.
Click to expand...
Click to collapse
Excellent! If it is not bricked then chances are good that it is 'only' a battery/charging problem.
Ariel.s said:
If everything is fine i'll see that the battery is chargeable when not completely dry and we'll be smarter after that.
in case it really became unchargeable and it is a problem in the charging board as you mentioned
Could you please expand on the functionality of the charging board ? and whats the process for fixing/replacing it ?
Click to expand...
Click to collapse
If, in the end, the phone does not charge by the USB connector (no matter if from PC or wall plug) then it could be worth to replace the flex print with the USB connector and parts of the charging electronics. This flex print is quite cheap and you can get it from ebay. With the help of some video from youtube you should be able to replace it yourself
Well,
I have an update on the issue.. unfortunately can't say its a good one..
I've tried turning on the device with a diffrent battery (charged) and it workes perfectely fine.
since I live far i didnt want to wait a month till i get the USB flex from ebay i went to a repair lab and let the test the phone.
Unfortunately it is not the USB Flex but a deeper problem,
apparently the u500,u501,u504 parts got fried on the MB and they don't have them at all.
I am going to try to restore my phone (using a full battery) to the way i bought it and try go to the store and work the warranty (it voids as soon as i changed ROM), going to have to read a lot on how to do it perfectly and erasing traces of changes (go an old nand and need to unroot afterwards)
do u know a good guide for restoring the phone to full stock ?
Also,
is it possible to buy a complete MotherBoard for the GS2 or its not worth it ?
Thanks for the help!
Ariel.s said:
Well,
I have an update on the issue.. unfortunately can't say its a good one..
I've tried turning on the device with a diffrent battery (charged) and it workes perfectely fine.
since I live far i didnt want to wait a month till i get the USB flex from ebay i went to a repair lab and let the test the phone.
Unfortunately it is not the USB Flex but a deeper problem,
apparently the u500,u501,u504 parts got fried on the MB and they don't have them at all.
I am going to try to restore my phone (using a full battery) to the way i bought it and try go to the store and work the warranty (it voids as soon as i changed ROM), going to have to read a lot on how to do it perfectly and erasing traces of changes (go an old nand and need to unroot afterwards)
do u know a good guide for restoring the phone to full stock ?
Click to expand...
Click to collapse
There are quite a few guides around here that deal with unrooting and getting the device ready for official service. Personally I just make sure the flash counter is reset (TriangleAway or JIG) and then flash a stock firmware.
Ariel.s said:
Also,
is it possible to buy a complete MotherBoard for the GS2 or its not worth it ?
Click to expand...
Click to collapse
You might find one on ebay but I think replacing the MBO is not that easy, even though never did it myself.
Ariel.s said:
Thanks for the help!
Click to expand...
Click to collapse
Your welcome
fxrb said:
...
You might find one on ebay but I think replacing the MBO is not that easy, even though never did it myself.
...
Click to expand...
Click to collapse
I had the device opened several times. Replacing the MBO should not be too difficult. There are only some screws and connectors.
kloetpatra said:
I had the device opened several times. Replacing the MBO should not be too difficult. There are only some screws and connectors.
Click to expand...
Click to collapse
If the warranty wont work than I saw its around 150$ but if that will solve it it might be worth it instead of buying a new phone.
Thanks Again!
They are a lot more than that unless you are in USA/Canada.Theres a firm on eBay that give you $30-$50 for your old board,and they sell theirs for around $180.
Samsung would be around $250...
Sent from my GT-I9100 using xda premium
So.. After a long time (!!) I have an update.
No lab fixed my phone as everyone said its "unfixable" or need to replace some parts that they don't have... so I did what I planned to do.
I took a full battery from a friend
Restored the phone to full stock (the same official "partner" ROM I got the phone when bought it (even putted Android 2.3 on it LOL)
formatted my SD card , and of course did a "Triangle Away" to reset the flash counter
basically returned the phone to the way i bought it..
Since I still had around 2 month on the warranty I went to the store i bought the phone from and they accepted the phone based on warranty, as i didn't install any ROM's (LOL )
Only TODAY after more than a month and a half of wait, while it was at their official lab, after that was sent abroad to the Vendor itself, after nobody was able to fix it I got a new phone (14 days used phone) so, considering i was ready to throw my phone and by a new one it turned out OK.
since no one was able to fix it, it was probably a major problem.
Of course its better i got a new one, since even if they fixed the issue, who know what else it might effected so its a very good result.
Don't know if this helps anyone a lot, but at least its some closure to the thread.
Thanks for everyone who helped here!
I'm aware that I might get insulted for being a n00b, but I went through a lot of pages and haven't seen a thread similar to mine, so I'm sorry if I have misused the search box. I have a Samsung Galaxy 2 II. Today, I wanted to root it so I tried. However, I'm a complete retard and accidentally tried to install a rom that wasn't made for my phone. Yes I know it's stupid. Odin crashed and caused my phone to go into black screen mode. I can't even access Download and Recovery mode. I have tried taking out the battery 5-45 minutes and it still doesn't work.
However, when I plug the usb cable inside the phone, The phone isn't being detected. I can hear 3 sounds. First sound is like when a usb is connected to the pc sound, and the 2 other ones sound like a usb hasn't been connected properly. I know I f'd up probably, but I just wanted to know if there's a solution for this other than USB JIG. Once again I know I'm supposed to learn what I'm doing, but it was a stupid move and I'm aware of that so sorry if I sound like a clueless n00b. I just thought I could do it properly, didn't think it would end like this.
syphlect said:
I'm aware that I might get insulted for being a n00b, but I went through a lot of pages and haven't seen a thread similar to mine, so I'm sorry if I have misused the search box. I have a Samsung Galaxy 2 II. Today, I wanted to root it so I tried. However, I'm a complete retard and accidentally tried to install a rom that wasn't made for my phone. Yes I know it's stupid. Odin crashed and caused my phone to go into black screen mode. I can't even access Download and Recovery mode. I have tried taking out the battery 5-45 minutes and it still doesn't work.
However, when I plug the usb cable inside the phone, The phone isn't being detected. I can hear 3 sounds. First sound is like when a usb is connected to the pc sound, and the 2 other ones sound like a usb hasn't been connected properly. I know I f'd up probably, but I just wanted to know if there's a solution for this other than USB JIG. Once again I know I'm supposed to learn what I'm doing, but it was a stupid move and I'm aware of that so sorry if I sound like a clueless n00b. I just thought I could do it properly, didn't think it would end like this.
Click to expand...
Click to collapse
what was your battery status??? like how much battery was left??? sometimes it drains off so maybe keep in charging for a while thn you can go to recovery or download mode...
NOTE: same issue happened with my friend screen black n when connect to pc, heard sound from pc speakers. the reason was different not same as you.
Peaceful Droid said:
what was your battery status??? like how much battery was left??? sometimes it drains off so maybe keep in charging for a while thn you can go to recovery or download mode...
NOTE: same issue happened with my friend screen black n when connect to pc, heard sound from pc speakers. the reason was different not same as you.
Click to expand...
Click to collapse
I have to admit that the batteries were dead. However, I tried putting in another battery fully charged and nothing happened.
syphlect said:
I have to admit that the batteries were dead.
Click to expand...
Click to collapse
I have to admit that it was a completely idiotic thing to do. You obviously did absolutely no/nada/ziltch/zero real research into flashing your device since you made 2 monumental mistakes, ie flashing device with low battery and also flashing incorrect rom.
Try using a USB jig to power device into download mode, If that doesnt work you will need to get a JTAG flash via a Riff box and if thats the case I have absolutley no sympathy for you.
I have had this s2 for less than a year so the battery should still be good and has been up until today. I plugged my phone in last night to charge over night as I usually do, but when I woke up it was completely dead. I tried 3 different cords and many different ports and wall sockets and it still does the same thing, which is nothing.
The phone seems very sensitve as to how I have the cord plugged into its port. I have it plugged in now but I have to keep watching it because it will randomly stop charging. Well, it's barely even charging anyways. It keeps going back and forth between 6% and 7% charge. Would replacing the port fix the issue or is it a problem with the battery? Any help or info would be appreciated.
TheGizmoJo said:
I have had this s2 for less than a year so the battery should still be good and has been up until today. I plugged my phone in last night to charge over night as I usually do, but when I woke up it was completely dead. I tried 3 different cords and many different ports and wall sockets and it still does the same thing, which is nothing.
The phone seems very sensitve as to how I have the cord plugged into its port. I have it plugged in now but I have to keep watching it because it will randomly stop charging. Well, it's barely even charging anyways. It keeps going back and forth between 6% and 7% charge. Would replacing the port fix the issue or is it a problem with the battery? Any help or info would be appreciated.
Click to expand...
Click to collapse
just to make sure if its a batt or the Micro USB port issue, u can try an alternate batt (may be one from ur friends S2) and see
Sun90 said:
just to make sure if its a batt or the Micro USB port issue, u can try an alternate batt (may be one from ur friends S2) and see
Click to expand...
Click to collapse
I suppose I could try that. Suppose it's not the battery. Could just replacing the port work or would I be able to exchange it for a new one at ATT since I have insurance on it? (I'd rather ask you guys first than deal with ATT customer service lol)
TheGizmoJo said:
I suppose I could try that. Suppose it's not the battery. Could just replacing the port work or would I be able to exchange it for a new one at ATT since I have insurance on it? (I'd rather ask you guys first than deal with ATT customer service lol)
Click to expand...
Click to collapse
u can just replace the USb port
Deleted. Sorry
Enviado desde mi GT-I9300 usando Tapatalk 4 Beta
I just got the replacement port board in the mail and the phone charges fine now. However, once I put the board in the phone is saying "Emergency Calls only."
I've tried taking the sim card in and out and restarting it and what not and it still says the same thing.
Is the phone recognizing that it's not the original part or something?
TheGizmoJo said:
I have had this s2 for less than a year so the battery should still be good and has been up until today. I plugged my phone in last night to charge over night as I usually do, but when I woke up it was completely dead. I tried 3 different cords and many different ports and wall sockets and it still does the same thing, which is nothing.
The phone seems very sensitve as to how I have the cord plugged into its port. I have it plugged in now but I have to keep watching it because it will randomly stop charging. Well, it's barely even charging anyways. It keeps going back and forth between 6% and 7% charge. Would replacing the port fix the issue or is it a problem with the battery? Any help or info would be appreciated.
Click to expand...
Click to collapse
Could be a custom kernel giving you grief?
I was on a custom kernel that was very slow or just didn't charge at all + it made the ph (pardon my french) fickin HOT!!
A new kernel & all is good
Have a look here
http://forum.xda-developers.com/showthread.php?p=42878566
-------------------------------------------
maybe your an iphone expert
------------------------------------------
King_Rat said:
Could be a custom kernel giving you grief?
I was on a custom kernel that was very slow or just didn't charge at all + it made the ph (pardon my french) fickin HOT!!
A new kernel & all is good
Click to expand...
Click to collapse
I think that could be part of the issue. However, my phone seems to be stuck in a boot loop after I did a factory reset and I can't get it into recovery mode for some reason.
theunderling said:
Have a look here
http://forum.xda-developers.com/showthread.php?p=42878566
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Click to expand...
Click to collapse
According to this I ordered the wrong REV number
I did put the new board back in before it started having the boot loop issue and it was still saying "Emergency Calls Only"
Also the old board started charging again for some reason....
This whole thing is just getting worse and worse!
TheGizmoJo said:
I think that could be part of the issue. However, my phone seems to be stuck in a boot loop after I did a factory reset and I can't get it into recovery mode for some reason.
Click to expand...
Click to collapse
You weren't on 4.0.4 were you??
This looks kinda messy.
If you were in 4.0.4, as rat said, you could be lucky as you probably have a brick due to the brick bug.
Of course, your warranty must still be standing.
Why? Because it's Samsung's fault, not yours (of course it is, they don't need to know tho).
Sent from my GT-I9100 using xda app-developers app
As of last night, whenever I try to connect my phone to either my outlet charger, my xbox, my computer...anything, it never even charges. The icon on the screen still says, "Connect your charger" even if it's connected. The sound doesn't even come on, and the battery icon doesn't move when it's connected (obviously, because it's not charging lol). But the only way I can use my phone is by charging my battery first. (Luckily I had a spare battery that I had already charged) and now I'm looking to buy a battery charger so I can switch battery's whenever I want. It'll be a pain in the a**, so there must be a way to fix it. Sometimes when I disconnect my charger, the icon pops up saying, "USB Connected". I've tried 4 different chargers also, and still no luck. I still haven't bought my warranty so I don't know if I can still do that and exchange it.
Any suggestions? I already tried different battery's, removing the battery for a couple of minutes, charging the phone while it's off (it seems to work but the battery icon goes from 1/4, 1/2, 3/4, and to full, then back to empty, and it does it again, but it freezes and it takes awhile and then finally it does it again, but it doesn't really charge.)
My phone IS rooted, and I have ShoStock3 with Clockwork Mod. I'm thinking of reverting back to my Clockwork Backup from March but I don't think that'll work. I don't want to loose anything from my Internal Storage that I may have stored.
Please help
May be a bad usb port or could be dirty..
http://pages.ebay.com/link/?nav=item.view&id=121149760536
Sent from my SGH-I777 using xda app-developers app
Teknodad1974 said:
May be a bad usb port or could be dirty..
http://pages.ebay.com/link/?nav=item.view&id=121149760536
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Is there any way I could fix it? And is there anyway I could clean it if it's dirty?
By the way, what's that charging port USB Dock Connector for? I've never seen them before so I dont know what they're for or how to use it.
Edit: Nevermind, I did my research and found out what it's for lol. I don't think I'll want to go that route, I hate taking apart computer's or phones because I'm not good at following instructions and I sometimes loose the parts lol.
This has happened to me three times. It's the charging module. You have to get it repaired I'm sad to say.
MidnightRising said:
This has happened to me three times. It's the charging module. You have to get it repaired I'm sad to say.
Click to expand...
Click to collapse
These phones are garbage, mine has fried twice now, and now its doing this exact same thing, i hate this phone and i hate straight talk, time to go to a contract and get a real phone