HELLO ,my english is bad ......
my HTC DNA was Not start, Black screen ,When connected to the computer ,Display QDloader ........
who can help me ? thank you
Atlas.F said:
HELLO ,my english is bad ......
my HTC DNA was Not start, Black screen ,When connected to the computer ,Display QDloader ........
who can help me ? thank you
Click to expand...
Click to collapse
Is the phone like it was when new or have you rooted it and loaded some custom rom? Hard to help without some additional clues.
Atlas.F said:
HELLO ,my english is bad ......
my HTC DNA was Not start, Black screen ,When connected to the computer ,Display QDloader ........
who can help me ? thank you
Click to expand...
Click to collapse
Help me out to better understand the situation I need to know a few things...
1) What have you done to the device (is the bootloader locked or unlocked? has it been rooted? did you flash any files, if so what files? did you attempt s-off?)
2) What were you doing before this happened?
3) Can you access recovery or bootloader?
.torrented said:
Help me out to better understand the situation I need to know a few things...
1) What have you done to the device (is the bootloader locked or unlocked? has it been rooted? did you flash any files, if so what files? did you attempt s-off?)
2) What were you doing before this happened?
3) Can you access recovery or bootloader?
Click to expand...
Click to collapse
1,unlocked,
2, I was looking for root s-off .
3, can't into recovery and bootloader......:crying:
Atlas.F said:
1,unlocked,
2, I was looking for root s-off .
3, can't into recovery and bootloader......:crying:
Click to expand...
Click to collapse
After you Unlocked it, did you flash anything else?
Can you give me as much detail as to what you were doing before this happened? Like any/all files you flashed? the order you tried doing all of it? To me it sounds like a soft-brick but im not certain because ive never experience anything like this?
Try just powering off the device then hold Power and Volume Down at the same time and see what happens?
Try just turning on the phone and go into command prompt/terminal and do either an
Code:
adb devices
fastboot devices
and see if either can recognize the phone
Related
I lost os in my phone, notthing in there. Now, version main 2.17.708.3 before failure, I upgraded 4.2.2. Help me restore ..to open my phone. I can not do anymore. Please help me how can download RUU with 2.17.708.3...
Thanks so much
---------------------
Email:[email protected]
vinhxdn said:
I lost os in my phone, notthing in there. Now, version main 2.17.708.3 before failure, I upgraded 4.2.2. Help me restore ..to open my phone. I can not do anymore. Please help me how can download RUU with 2.17.708.3...
Thanks so much
---------------------
Email:[email protected]
Click to expand...
Click to collapse
What does the command prompt/adb say when you connect the phone to the pc? What is the state of your phone now? Bootlooping or else?
superbay said:
What does the command prompt/adb say when you connect the phone to the pc? What is the state of your phone now? Bootlooping or else?
Click to expand...
Click to collapse
my phone
RELOCKED
ENRC2B_U PVT SHIP S-OF RL
CID _001
HBOOT-1.72.0000
RADIO-3.1204.171.33
Now, it can not copy anything to sdcard, can not acess stopping logo HTC iteration, I try to search RUU for it and hope restore Ship Rom but I can not find RUU for version main 2.17.708.3. Pls talk to me how to do?
I've been having thiss same problem on my att device. I can't connect to my pc at all, and when I try running things with a tool kit while its plug it, it tells me that the daemon has failed etc. Anyone know if its a whole device problem?
Edit: but my phone does turn on and is functioning, I just can't put anything on my phone, or flash any boot.imgs, that's the difference haha
Sent from my HTC One X+
.....help me!!! very urgent
There's no RUU version 2.xx.xxx.x for this phone. Latest one was 1.17.xxx.x if i remember correctly. But if you've got an S-OFF phone, you should have no problem using this Toolkit to set your phone to superCID and then use whatever RUU fits best for you.
reaper90 said:
There's no RUU version 2.xx.xxx.x for this phone. Latest one was 1.17.xxx.x if i remember correctly. But if you've got an S-OFF phone, you should have no problem using this Toolkit to set your phone to superCID and then use whatever RUU fits best for you.
Click to expand...
Click to collapse
I already used Toolkit above, but when a flash rom.zip in title Setup so my phone not respond, I think my problem is conection Memory of phone. When Fastboot state have " Failure to open usb master mode" red color then hide................recovery operating good, I tried remount but can not perform.
Pls help me step by step to open usb mode.
Thanks!
superbay said:
What does the command prompt/adb say when you connect the phone to the pc? What is the state of your phone now? Bootlooping or else?
Click to expand...
Click to collapse
The command prompt and ADB are not.
poojiggles7 said:
I've been having thiss same problem on my att device. I can't connect to my pc at all, and when I try running things with a tool kit while its plug it, it tells me that the daemon has failed etc. Anyone know if its a whole device problem?
Edit: but my phone does turn on and is functioning, I just can't put anything on my phone, or flash any boot.imgs, that's the difference haha
Sent from my HTC One X+
Click to expand...
Click to collapse
Pls tell me how can you turn on is functioning?
I have a Lenovo a2110 that suddenly only is recognized in apx mode.
It was running the stock rom.
Can somebody explain to me how I can access adb mode to do a recovery or how to get out off the apx mode ?
nobody who can explain to me how to get started with flashing a 9714 under apx ?
peter43 said:
nobody who can explain to me how to get started with flashing a 9714 under apx ?
Click to expand...
Click to collapse
Try this site: https://www.android-hilfe.de/forum/medion-lifetab-s9714-forum.902/
If you are not german use Google Chrome with translation.
Hope this will help you.
Just tell us if you solved your device problem.
Good Luck.
thank you, if I understand it well the boot-loader is erased from the device
How can this happen ?
it was working the last time it was shutdown.
Can somebody tell me where to find the boot-loader files for download ?
peter43 said:
thank you, if I understand it well the boot-loader is erased from the device
How can this happen ?
it was working the last time it was shutdown.
Can somebody tell me where to find the boot-loader files for download ?
Click to expand...
Click to collapse
I have one question:
1. Can you enter by any chance in recovery?
Since I don't own this device I ask.
stympy said:
I have one question:
1. Can you enter by any chance in recovery?
Since I don't own this device I ask.
Click to expand...
Click to collapse
No only apx mode
I found an nvflash recovery script for the lenovo a2109, i'am reading it is the same as the 2110 execpt the 9" screen.
Can somebody confirm I can use it ?
is it normal when stuck in apx-mode , that the charging led isn't working ?
peter43 said:
is it normal when stuck in apx-mode , that the charging led isn't working ?
Click to expand...
Click to collapse
Nope. It is not normal.
Hello guys, it looks like this forum is still alive (unlike my phone lol) so let me explain what happened to my D620r.
Firstly - my friend bricked the phone during bootloader unlock process (xD rip) now the phone shows up as QDLoader 9008 yesterday it was like "QHSUSB_BULK" or something like this but after installing some drivers its QDLoader now lol xD (sometimes QDLoader disappears from device manager AND SHOWS UP AS http://imgur.com/a/qJSzE then i have to click the testpoint again)
BASICALLY
I'VE TRIED DOING THIS https://forum.xda-developers.com/showthread.php?t=2582142
nothing happened
and btw all partitions disappeared now there's only QDLoader in Device Manager that's all
Try this:
https://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
Nope, screen dont even light up when i connect the phone (one case was when i connected phone without battery then screen was lighting up but now there's nothing) btw im trying this right now https://forum.xda-developers.com/g2-mini/help/lg-g2-minid620r-hard-brick-recovery-t3543466 but i dont really know how to use this emmc software download app
You can follow the procedure in post #2 of the thread I linked.
not working
EMMC Software download app detects phone as "COM2 Phone in download mode"
pls halp
Kaszke said:
pls halp
Click to expand...
Click to collapse
Try to use the lg flash tool 2014 while using the downloadmode key combination. If the phone gets detect, you can flash a firmware, that is present somewhere in the internet (there are a lot).
doesnt work, pls halp again
Kaszke said:
doesnt work, pls halp again
Click to expand...
Click to collapse
If you need help, explain us your probem and tell us what you did before to solve it.
Read first post?
@ref
Simple QHSUSBBULK, I failed at flashing bootloader i think i flashed G2 one instead of G2 Mini
Kaszke said:
@ref
Simple QHSUSBBULK, I failed at flashing bootloader i think i flashed G2 one instead of G2 Mini
Click to expand...
Click to collapse
Then try again with the one for the g2m
How can i reinstall it without any adb and things?
Kaszke said:
How can i reinstall it without any adb and things?
Click to expand...
Click to collapse
I'm pretty sure you can't.
So why u tell me to do that XD
Kaszke said:
So why u tell me to do that XD
Click to expand...
Click to collapse
How did you flash the bootloader of the G2?
Do that again but with the bootloader of the g2m.
In the case you need adb:
https://forum.xda-developers.com/showthread.php?t=2317790
Hi, my BQ Aquaris U2 Lite won't boot, I unlocked its bootloader and when I restart it, it is stuck at the next screen:
Your device software can't be checked for corruption. Please lock the bootloader.
If no key pressed:
Your device will boot in 5 seconds
But nothing happens, it stays there.
Help please, thank you.
@help38
The first time that an Android device boots up, the bootloader ( the Android counterpart to Windows BIOS/UEFI ) starts running. It is basically a software program that contains a list of OS instructions to ensure the smooth functioning of the device. Once this bootloader is unlocked, the user can manually change what ROM image was set as default by the OEM, and customize the device according to its liking.
Simply unlocking the bootloader does NOTHING than the Android OS now is waiting for instruction what ROM to load and run
jwoegerbauer said:
@help38
The first time that an Android device boots up, the bootloader ( the Android counterpart to Windows BIOS/UEFI ) starts running. It is basically a software program that contains a list of OS instructions to ensure the smooth functioning of the device. Once this bootloader is unlocked, the user can manually change what ROM image was set as default by the OEM, and customize the device according to its liking.
Simply unlocking the bootloader does NOTHING than the Android OS now is waiting for instruction what ROM to load and run
Click to expand...
Click to collapse
Hi, thank you, but my phone is stuck at that screen and nothing happens, I can't boot Android, do you know what is happening?
I unlocked the bootloader with BQ Firmware Flash Tool, because the phone only loaded Android Recovery, and didn't boot up the OS.
I only want to recover my files and photos
Thank you again.
@help38
I think you've to flash a Custom ROM. Note that's only possible if USB debugging got enabled on phone before unlocking the bootloader took place.
jwoegerbauer said:
@help38
I think you've to flash a Custom ROM. Note that's only possible if USB debugging got enabled on phone before unlocking the bootloader took place.
Click to expand...
Click to collapse
How can I do that?
I didn't have USB debugging enabled, aren't there any other ways to recover my files?
Thank you.
help38 said:
How can I do that?
I didn't have USB debugging enabled, aren't there any other ways to recover my files?
Thank you.
Click to expand...
Click to collapse
No other methods, AFAIK
Even doing a Factory Reset doesn't relock the bootloader.
BTW: The 1st thing of all things an Android user should do is to enable USB debugging on his phone: that makes it all easier.
jwoegerbauer said:
No other methods, AFAIK
Even doing a Factory Reset doesn't relock the bootloader.
BTW: The 1st thing of all things an Android user should do is to enable USB debugging on his phone: that makes it all easier.
Click to expand...
Click to collapse
, thank you, but, do you know if there is someone who could recover the files by paying him?
I really want those files
help38 said:
, thank you, but, do you know if there is someone who could recover the files by paying him?
I really want those files
Click to expand...
Click to collapse
Repair service?
jwoegerbauer said:
Repair service?
Click to expand...
Click to collapse
I don't think they could, but I will try, thanks.
jwoegerbauer said:
Repair service?
Click to expand...
Click to collapse
They told me that they can't...
Do you know any other place to recover my photos?
Thank you again.
At least is there a way to unbrick the phone?
Thanks.
Help please
Hi fellow developers.
So,my story is quite weird and expected indeed.
Being the noob I am at flashing custom roms and recoveries,I flashed orange fox recovery on my device,even flashed a custom rom and managed to use it for about 3/4 hours.
Then I thought that my device was ready, all my changes work,and it is a good idea to relock my bootloader.So,without flashing the stock recovery back,I relocked my bootloader.
After reboot,my device is stuck on "Red state" and keeps on rebooting after every 5 secs. I can't even boot to fastboot mode,nor can I completely shut down my device.
So any ideas what can I do? Do I need to go to the service center? If yes,what would they do and how much would they charge?
Thank you!.
Kaybee2611 said:
Hi fellow developers.
So,my story is quite weird and expected indeed.
Being the noob I am at flashing custom roms and recoveries,I flashed orange fox recovery on my device,even flashed a custom rom and managed to use it for about 3/4 hours.
Then I thought that my device was ready, all my changes work,and it is a good idea to relock my bootloader.So,without flashing the stock recovery back,I relocked my bootloader.
After reboot,my device is stuck on "Red state" and keeps on rebooting after every 5 secs. I can't even boot to fastboot mode,nor can I completely shut down my device.
So any ideas what can I do? Do I need to go to the service center? If yes,what would they do and how much would they charge?
Thank you!.
Click to expand...
Click to collapse
Not that only you should have the stock recovery to relock bootloader, you should need to return completely to stock to can relock it safely.
Follow this guide carefully https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ replace all the files needed when it comes to your specific model.
Kaybee2611 said:
Hi fellow developers.
So,my story is quite weird and expected indeed.
Being the noob I am at flashing custom roms and recoveries,I flashed orange fox recovery on my device,even flashed a custom rom and managed to use it for about 3/4 hours.
Then I thought that my device was ready, all my changes work,and it is a good idea to relock my bootloader.So,without flashing the stock recovery back,I relocked my bootloader.
After reboot,my device is stuck on "Red state" and keeps on rebooting after every 5 secs. I can't even boot to fastboot mode,nor can I completely shut down my device.
So any ideas what can I do? Do I need to go to the service center? If yes,what would they do and how much would they charge?
Thank you!.
Click to expand...
Click to collapse
For future reference, NEVER re-lock the bootloader when your phone isn't 100% stock. The guide SubwayChamp linked above should work.
SubwayChamp said:
Not that only you should have the stock recovery to relock bootloader, you should need to return completely to stock to can relock it safely.
Follow this guide carefully https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ replace all the files needed when it comes to your specific model.
Click to expand...
Click to collapse
Hey @SubwayChamp
I did try the method you recommended. But,my phone is not recognised as a mediatek device.They show all the connected devices as usb.
Kaybee2611 said:
Hey @SubwayChamp
I did try the method you recommended. But,my phone is not recognised as a mediatek device.They show all the connected devices as usb.
Click to expand...
Click to collapse
[GUIDE] REALME 7 RMX2155 GLOBAL BOOTLOADER UNLOCK
WELCOME, ALL. After a very tiring process of swapping between ROMs and changing regions, APKs, et cetera, we have finally been able to perfect the method for unlocking the bootloader of the RMX2155! This is a detailed guide aimed to give you an...
forum.xda-developers.com
Try following step one to eight inclusive. Should then recognize your device.
Kaybee2611 said:
Hey @SubwayChamp
I did try the method you recommended. But,my phone is not recognised as a mediatek device.They show all the connected devices as usb.
Click to expand...
Click to collapse
how much will service center charge for repairing it??
Hey for me same problem now in my narzo 30a.... can u fix that problem ? @Kaybee2611
daitama said:
how much will service center charge for repairing it??
Click to expand...
Click to collapse
I didn't bring it to the repair center, in my country no one knows about. IDK which the price could be, maybe 40 buckets.