[Q] i9100 will not react at all! - Galaxy S II Q&A, Help & Troubleshooting

Hi folks
I have the problem, that when i tried to install Jellybam on my phone, it suddently went black, and now it wont start at all.
It will not react on home+lock+volume up/down either.
What can the problem be, and is there any solution to this problem at all?
Sincerely
Pumba Melbye

Melbye said:
Hi folks
I have the problem, that when i tried to install Jellybam on my phone, it suddently went black, and now it wont start at all.
It will not react on home+lock+volume up/down either.
What can the problem be, and is there any solution to this problem at all?
Sincerely
Pumba Melbye
Click to expand...
Click to collapse
Are you sure the battery is charged? Do you see the charging animation when you plug in the charger?

answer
Yes, it was fully charged, and it has also been connected to the charger for the last 8 hours now, and we tested it with my friends battery, so that is not the prob.

Do You see charging animation when You plug in Your charger ?
If not then.... well, You are hardbricked.

answer
well, i don't see anything no matter what i do at all, so i hope you are right. In that case, what should i do to save it?

Before you flashed jellybam, were you on 4.0.4 stock?
Sent from the little guy

answer
Yes, i had 4.0.4 and heard a friend telling that his i9100 had been upgraded to jellybam, and we tried to do the same to mine, but when it came to the installation of the new OS, it went all black and hasn't reacted since.
ps. when in charger, the phone is getting warm in the top.

Yes, I know.
You bricked it, read about brick bug.
And I gotta post my fav 4.0.4 meme...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from the little guy

answer
alright, how to fix it?

Melbye said:
alright, how to fix it?
Click to expand...
Click to collapse
Warranty? Tell them you did a factory reset and never came back (which is the truth, don't say anything about jellybam tho).
No warranty? mobo replacement.

answer
nothing else to do?

Melbye said:
nothing else to do?
Click to expand...
Click to collapse
Nope.

Melbye said:
alright, how to fix it?
Click to expand...
Click to collapse
The only way to fix it is to replace main board in Your phone. I hope it is still under warranty otherwise it's gonna be rather expensive. Tell them it happened when You did factory reset and never mention rooting or flashing anything.

Related

Help!!!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9100 using XDA App
Pretty much self explanatory
Camera was working yesterday
Today its not :'(
I had this a few days back - turns out i'd been using the phone in 'torch' mode, and it had turned itself off after a while, but obviously didn't release the led function back to the camera.
When I cycled the torch back on and off again it was fine. I imagine rebooting would do the same thing?
Hope that helps a little!
yes, just reboot the phone and it will work again, had the same thing
have tried multiple reboots and even taken the battery out! not too sure what im supposed to do....may just reflash the original rom again to see if it makes a difference
skaif said:
have tried multiple reboots and even taken the battery out! not too sure what im supposed to do....may just reflash the original rom again to see if it makes a difference
Click to expand...
Click to collapse
Have you updated to the latest firmware released today?
psp888 said:
Have you updated to the latest firmware released today?
Click to expand...
Click to collapse
nope, just about to though, downloading now
ok that seemed to do the trick...it didnt work after reflashing but after rebooting after the reflash it suddenly started to work!
happy for now, thanks again for your help guys
skaif said:
ok that seemed to do the trick...it didnt work after reflashing but after rebooting after the reflash it suddenly started to work!
happy for now, thanks again for your help guys
Click to expand...
Click to collapse
just a question, but had you changed the lcd density before the camera failed? if so, did you adjust it below 182?
nope, lowest i set it to was 210, but that screenshot was taken at the norm 240
ok its happened again!!! i flashed the latest update and rebooted and it was fine, camera app loaded up fine...once i installed a theme it was saying the same message!!!! is this a hardware fault? i can hear the camera clicking every time it switches on
Just flashed the original firmware back onto it, the o2 one and its saying the same thing.....is this a hardware fault?
***************EDIT******************************
So i did a factory reset and the camera really is working now
anybody have a clue why this is happening? its slightly annoying....going to debrand and root to see if i can locate the problem...

[Q] [HELP] [WTSR/SMPL] Bricked SGSII by removing Gmaps

Hey guys,
Pretty desperate here, and I've been searching the forums and other pages on the web for a solution, but nothing yet.
I'm afraid I did something pretty stupid. I wanted to update Gmaps, but Play Store gave me the 'not signed correctly, please delete older version' message. So I tried to uninstall the old Gmaps through Settings, but that didn't work.
Than I had this 'brilliant' idea to just hardcore delete Gmaps through Titanium Backup. Well, I did and... BOOM! Black screen, a short boot loop and after that... nothing.
I took out the battery for about 15 minutes and placed it back in, and now I get this weird message saying 'WTSR/SMPL'.
Phone won't start up in Recovery, only Download mode.
Somebody can help me out here?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flash a stock rom in download mode with Odin, clean slate. Then re-root your phone & you can restore a backup (if you have one).
MistahBungle said:
Flash a stock rom in download mode with Odin, clean slate. Then re-root your phone & you can restore a backup (if you have one).
Click to expand...
Click to collapse
Thanks for your response so quick, appreciate it.
BTW, are you sure there is no other way? Did you see this WTSR message before?
No probs. No, I've never seen it. But thinking logically; you have no recovery, the phone won't boot normally & you can only get into download mode. You don't really have any other option other than the one I suggested, do you ?
deepo75 said:
Thanks for your response so quick, appreciate it.
BTW, are you sure there is no other way? Did you see this WTSR message before?
Click to expand...
Click to collapse
MistahBungle said:
No probs. No, I've never seen it. But thinking logically; you have no recovery, the phone won't boot normally & you can only get into download mode. You don't really have any other option other than the one I suggested, do you ?
Click to expand...
Click to collapse
Not sure. The weird thing is: when I press the home button repeatedly, the screen starts flickering from white to black and back. So there's still something alive, don't you think?

Odin help, pleeeeeeeease

I was using RR 3.0.6 JB and something made my status bar dissapear. So, I started flash the factory rom (O2 UK I9100P ICS) and now my odin still like this since 20 minutes ago. It's normal? Or something more wrong happened? lool :/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try to change the cable if odin stucks.
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
leeomendes said:
I was using RR 3.0.6 JB and something made my status bar dissapear. So, I started flash the factory rom (O2 UK I9100P ICS) and now my odin still like this since 20 minutes ago. It's normal? Or something more wrong happened? lool :/
Click to expand...
Click to collapse
Never a good Idea to use the pit file unless there is something drastically wrong with the phone....
Have you had any luck fixing this.. if not post the current state of your phone..
Unplug the cable and see what happened (soft brick, hard brick)... you shouldn't have used the .pit file for such a problem...
[size=-2]Sent from my Galaxy S2[/size]
s_vohra said:
Never a good Idea to use the pit file unless there is something drastically wrong with the phone....
Have you had any luck fixing this.. if not post the current state of your phone..
Click to expand...
Click to collapse
yeah, going to buy my JIG cable... I think it's hard bricked now :/
gb.yolo said:
Unplug the cable and see what happened (soft brick, hard brick)... you shouldn't have used the .pit file for such a problem...
[size=-2]Sent from my Galaxy S2[/size]
Click to expand...
Click to collapse
But what happened is that the phone don't found the internal storage... anyway, my phone is bricked now. thanks for help me
Yeah. I left my phone in a repair centre and will be £50 to fix... My bootloader "dead" or something like this!

[Q] Need help about HTC titan

Hello,
I'm newbie and from Vietnam.
My friend gave me this broken HTC titan AT&T, he asked me for any solution. Therefore, I searched in many forums but there is no solution.
First, when I power it on, it goes straight to this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then, I tried to flash AT&T stock rom but it stuck at 6%:
Please help me
Sorry for my bad English
Regards.
thelord186 said:
Hello,
I'm newbie and from Vietnam.
My friend gave me this broken HTC titan AT&T, he asked me for any solution. Therefore, I searched in many forums but there is no solution.
First, when I power it on, it goes straight to this screen:
Then, I tried to flash AT&T stock rom but it stuck at 6%:
Please help me
Sorry for my bad English
Regards.
Click to expand...
Click to collapse
How long did you wait? It stays at 6% for a good 5 minutes before it goes further...
xconomicron said:
How long did you wait? It stays at 6% for a good 5 minutes before it goes further...
Click to expand...
Click to collapse
Mine have somehow similar effect...
xconomicron said:
How long did you wait? It stays at 6% for a good 5 minutes before it goes further...
Click to expand...
Click to collapse
eh..I waited for it almost 30 minutes and it didn't go further. do you have any recommendation?
thelord186 said:
eh..I waited for it almost 30 minutes and it didn't go further. do you have any recommendation?
Click to expand...
Click to collapse
Did you try doing a factory reset with it? If so give it a try..
Actually, I did try before posting here.
thelord186 said:
Actually, I did try before posting here.
Click to expand...
Click to collapse
lol my bad I had to ask...
Use caution on this advice...
Either use goldcard to flash the ATT rom OR (most likely not going to work....) download a EU rom with an 2.5 or lesser SPL and try to flash it.

Samsung Galaxy Alpha g850a stuck in bootloop

Hey everyone, i have a problem with my phone which is Samsung Galaxy Alpha G850. It is stuck in bootloop when on battery. In the begining it worked on charger all the time but as the time went by the problem was worse and it was stuck on bootloop on charger also. I tried new battery but it didnt work, also i tried flashing new ROM and nothing has changed. Does anyone have an idea how to fix this?
p.s. I dont have warranty papers buying a new phone is better for me than sending it to Samsung
i have the exact problem as you,any solutions ?
arbi01 said:
i have the exact problem as you,any solutions ?
Click to expand...
Click to collapse
No, i tried everything but nothing worked, i guess it's some hardware problem
Alpha stucked in bootloop
Hi all Alpha people,
Got also in stucked bootloop SM-G850F.
I took out battery, press power button a few seconds,
Reinsert accu and quickly press vol. down+home and power.
After a few attempts the device turned to download mode
and was ready to install stock rom, found by sammobile.
Perhaps trying recovery if you have one. Greets Nick
Solved
I had the same trouble, buyed a new battery and the problem continues. The solution is to use a small piece of paper to adjust the battery. Please check the images attached of the solution. Hope will help to other people with the same trouble.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
razametal said:
I had the same trouble, buyed a new battery and the problem continues. The solution is to use a small piece of paper to adjust the battery. Please check the images attached of the solution. Hope will help to other people with the same trouble.
Click to expand...
Click to collapse
cant see the images please

Categories

Resources