hi, im new in this forum ... (i have verizon droid razr 4.0.4)
ive rooted and installed safestrap 3.05 as the videos of 007 indicated
but im not sure which roms I can install.. Ex: i was looking into D-Wiz because it seems like the most popular around here
but since i will use my droid razr on a gsm(umts) network should i install the roms in xt910 or xt912?? and which version should i install D-wiz or D-wiz JBX??
If its a Verizon Droid Razr then you should always install xt912 ROMs or you will brick your device. It doesn't matter if your on a GSM network btw.
Gus194 said:
If its a Verizon Droid Razr then you should always install xt912 ROMs or you will brick your device. It doesn't matter if your on a GSM network btw.
Click to expand...
Click to collapse
edit: now my razr wont trun on last thing i did was choose power off with safestrap! no lights no anything!!
edit2 i was able to get into safestrap with power + vol down / or up? i would like to know which would be the version of dwiz i can install?
antmiu2 said:
edit: now my razr wont trun on last thing i did was choose power off with safestrap! no lights no anything!!
edit2 i was able to get into safestrap with power + vol down / or up? i would like to know which would be the version of dwiz i can install?
Click to expand...
Click to collapse
What Dwiz version did you install? Also I would recommend that you go here for a List of ROMs that you can Install
http://www.droidrzr.com/index.php/forum/32-droid-razr-ics-roms-ics-kernel-xt912/
Gus194 said:
What Dwiz version did you install? Also I would recommend that you go here for a List of ROMs that you can Install
http://www.droidrzr.com/index.php/forum/32-droid-razr-ics-roms-ics-kernel-xt912/
Click to expand...
Click to collapse
i tried to install dwiz 1.0.4 and it said failed?
am i being limited to roms because of safestrap or having the verizon droid razr?? can you please recommend me a rom that i could flash?
antmiu2 said:
i tried to install dwiz 1.0.4 and it said failed?
am i being limited to roms because of safestrap or having the verizon droid razr?? can you please recommend me a rom that i could flash?
Click to expand...
Click to collapse
I can't really recommend any ROM since they're all great, but on that link that I gave you, you can install any of those ROMs
.
Gus194 said:
I can't really recommend any ROM since they're all great, but on that link that I gave you, you can install any of those ROMs
.
Click to expand...
Click to collapse
even the jelly bean ones?
antmiu2 said:
even the jelly bean ones?
Click to expand...
Click to collapse
No, you have to Be on tge Jelly Bean kernel for those ROMs.
Gus194 said:
No, you have to Be on tge Jelly Bean kernel for those ROMs.
Click to expand...
Click to collapse
would you recommend me to update to jb via
http://forum.xda-developers.com/showthread.php?p=35975914
antmiu2 said:
would you recommend me to update to jb via
http://forum.xda-developers.com/showthread.php?p=35975914
Click to expand...
Click to collapse
I'm on JB, I love it. But the downside is that there's not as much ROMs on JB as on ICS. So idk, it's your choice. Oh and yea you can use that guide to update to JB
Gus194 said:
I'm on JB, I love it. But the downside is that there's not as much ROMs on JB as on ICS. So idk, it's your choice. Oh and yea you can use that guide to update to JB
Click to expand...
Click to collapse
yea if it is stable enough i am willing to upgrade.. its a matter of quality not quantity ... what jb rom are you using?
antmiu2 said:
yea if it is stable enough i am willing to upgrade.. its a matter of quality not quantity ... what jb rom are you using?
Click to expand...
Click to collapse
Right no im using Aviator 2.0.0
I am now on official Jelly Bean leak and rooted!
i would like to know how would i go about flashing custom roms now?
antmiu2 said:
I am now on official Jelly Bean leak and rooted!
i would like to know how would i go about flashing custom roms now?
Click to expand...
Click to collapse
what custom recovery do you have Safestrap or BMM?
i believe i have non right now // is there a tutorial for that or can i use the same apk i used for ics??
would you recommend safestrap or bmm?
Related
i am currently on ics 4.04 using xt910 gsm on fido network in canada running latest version of safestrap
im thinking of going to jellybean i know there is no way back.
so what are some of the roms that you guys are using or recommend on jellybean ? and why ?
just looking for some ideas as im really confused.
also can i dual boot like have ics and still run jb roms ?
naifs_br10 said:
i am currently on ics 4.04 using xt910 gsm on fido network in canada running latest version of safestrap
im thinking of going to jellybean i know there is no way back.
so what are some of the roms that you guys are using or recommend on jellybean ? and why ?
just looking for some ideas as im really confused.
also can i dual boot like have ics and still run jb roms ?
Click to expand...
Click to collapse
Why are you saying that you can not go back to ICS?
I install this http://forum.xda-developers.com/showthread.php?t=2078021 and I went back to ICS with RDS,without any problem.
Planing to install this http://forum.xda-developers.com/showthread.php?t=2079566,looks good and promising
welder73 said:
Why are you saying that you can not go back to ICS?
I install this http://forum.xda-developers.com/showthread.php?t=2078021 and I went back to ICS with RDS,without any problem.
Planing to install this http://forum.xda-developers.com/showthread.php?t=2079566,looks good and promising
Click to expand...
Click to collapse
i installed the the first post the tutorial by razrguy to go on jb. now im looking for some roms. this rom why do you want to install it good battery life ?
im in to battery life alot and no blur. no moto or any other blur
thank u for your response
Just sharing the information I saw today in Google+:
Motorola Droid RAZR/RAZR MAXX (XT910) and Motorola Droid RAZR (XT912) are now officially supported by CyanogenMod Team.
As they said in this post, the developers who are porting this ROM to us joined the CM family.
You can see the Device page here:
CDMA
GSM
Hope we all could enjoy it's stable release soon!
wow I have been waiting for this, very awesome. I hope we can see stable builds soon :good::good::victory:
one thing I miss is BMM compability...
Based
Sorry, but i read all and dont see if this rom is ICS based or JB. Any know? I think is ICS
Lxledesma said:
Sorry, but i read all and dont see if this rom is ICS based or JB. Any know? I think is ICS
Click to expand...
Click to collapse
It's CM10.1, based on Android 4.2.2
fredamsouza said:
It's CM10.1, based on Android 4.2.2
Click to expand...
Click to collapse
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
I'm pretty sure its the ics kernel still
Full-Throttle Team
Fuzion Team
Android Aggression team
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
Per the web site: "This is for XT912 with stock ICS KERNEL ONLY!"
Awesome... hope they solve the bluetooth issue soon.
We'll likely see it stick to ICS Kernel only until a bit after the official Jelly Bean OTA, at which point you'll start to see dhacker and Hash switch things over permanently. I still can't believe that a new Motorola device is supported, much less one as locked down as Verizon has the CDMA version haha. Kudos to both dhacker and Hash for their hard work on all this.
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
I have a ICS kernel and safestrap, I install this in slot 4 and works fine.
Enviado desde mi XT910 usando Tapatalk 2
Great news! I'm glad all their hard work has paid off
Running it now. Works fine although there's still no Bluetooth and no flash.
Sent from my XT910 using xda app-developers app
Nikorasu said:
Awesome... hope they solve the bluetooth issue soon.
Click to expand...
Click to collapse
The bluetooth has been my biggest pet peeve with 10.1. I really wish I could use 10.1 daily but it doesn't make sense for me without bluetooth functioning correctly.
R: CyanogenMod 10.1 becomes Officially Nightly
cschuck320 said:
The bluetooth has been my biggest pet peeve with 10.1. I really wish I could use 10.1 daily but it doesn't make sense for me without bluetooth functioning correctly.
Click to expand...
Click to collapse
+1
Sent from my XT910 using xda app-developers app
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
I did it with ICS Kernel, and Safestrap 3.11 on Slot-1-2GB. Worked as expected.
fredamsouza said:
I did it with ICS Kernel, and Safestrap 3.11 on Slot-1-2GB. Worked as expected.
Click to expand...
Click to collapse
Running this with the 20th March nightly on SS3.11. Wondering if anyone has been successful getting it working under BMM or if anyone has even tried with CWM? Happy it works under SS but kind of perfer the way BMM opperates and would like to give it a go... any thoughts ??
Many thanks,
:fingers-crossed:
AW: CyanogenMod 10.1 becomes Officially Nightly
Should be working I know many people who are using bmm
Here is one example:
http://forum.xda-developers.com/showthread.php?p=39392901
Sent from my XT910 using xda app-developers app
philharmonick said:
Running this with the 20th March nightly on SS3.11. Wondering if anyone has been successful getting it working under BMM or if anyone has even tried with CWM? Happy it works under SS but kind of perfer the way BMM opperates and would like to give it a go... any thoughts ??
Click to expand...
Click to collapse
Well, I'm using it at the moment, so the current kexec official builds definitely work with BMM
JFYI, the kexec official builds also work after performing the OTA JB EU update. Just removed SS3.11 saved root with OTA Root Keeper, Flashed (held breath) booted all good.. renabled root, reinstalled SS.. booted into recovery, selected by CM10.1, wiped cache and dalvic (a few times each for good measure) rebooted and away she goes... now I've got 4.1.2 Stock and CM10.1 4.2.2 under SS. Happy Days!
working fine with bmm.there are some issues.but it is good enough for daily use.:good:
i have a couple of days looking around for an answer and nothing...
i updates to [Leaked-Ota][Cdma][4.1.2] Jelly Bean 98.72.8 (12/27/12) an obtained root
then someone told me to to just install safestrap to install custom jb roms ...
so i installed safestrap 3.05 and boom.. cant boot.. flashing roms wont work..
all i can do is get back into safestrap 3.05 where i cant be sure of the charge because it always show something different//
btw i think i have ICS stock rom backed up becaused i followed hrishi21007 tutorial on youtube
i will donate to whoever helps me restore the phone and gets me on track to flashing jb roms...
I'll apprecieate any comments. thank you
antmiu2 said:
i have a couple of days looking around for an answer and nothing...
i updates to [Leaked-Ota][Cdma][4.1.2] Jelly Bean 98.72.8 (12/27/12) an obtained root
then someone told me to to just install safestrap to install custom jb roms ...
so i installed safestrap 3.05 and boom.. cant boot.. flashing roms wont work..
all i can do is get back into safestrap 3.05 where i cant be sure of the charge because it always show something different//
btw i think i have ICS stock rom backed up becaused i followed hrishi21007 tutorial on youtube
i will donate to whoever helps me restore the phone and gets me on track to flashing jb roms...
I'll apprecieate any comments. thank you
Click to expand...
Click to collapse
If you installed the OTA update, you are now on a JB Kernel. That means your ICS backup is useless, since the razr has a locked bootloader.
It also means that any custom ROMs you install need to be built off the JB Kernel. The JB ROMs that were here before the OTA were built around the existing ICS kernel cause, again locked bootloader.
Are the ROMs you are trying to install made for the JB kernel? If not, they wouldn't boot, they are made for the ICS kernel
Draxin said:
If you installed the OTA update, you are now on a JB Kernel. That means your ICS backup is useless, since the razr has a locked bootloader.
It also means that any custom ROMs you install need to be built off the JB Kernel. The JB ROMs that were here before the OTA were built around the existing ICS kernel cause, again locked bootloader.
Are the ROMs you are trying to install made for the JB kernel? If not, they wouldn't boot, they are made for the ICS kernel
Click to expand...
Click to collapse
i guess they are built for the jb kernel and i get then from this forum:
http://www.droidrzr.com/index.php/forum/154-droid-razr-roms-for-the-ice-cream-sandwich-kernel-xt912/
did i get it right??
antmiu2 said:
i guess they are built for the jb kernel and i get then from this forum:
http://www.droidrzr.com/index.php/forum/154-droid-razr-roms-for-the-ice-cream-sandwich-kernel-xt912/
did i get it right??
Click to expand...
Click to collapse
If those are the ROM's that you are installing then, they are the wrong ones, and that is your problem. If you look at the top they say they are for the Ice cream sandwich (ICS) kernel. You will need ones for the JellyBean(JB) kernel if you installed the OTA update.
Draxin said:
If those are the ROM's that you are installing then, they are the wrong ones, and that is your problem. If you look at the top they say they are for the Ice cream sandwich (ICS) kernel. You will need ones for the JellyBean(JB) kernel if you installed the OTA update.
Click to expand...
Click to collapse
oops -_- where can i find JB kernel Roms? i need to fix this asap
antmiu2 said:
oops -_- where can i find JB kernel Roms? i need to fix this asap
Click to expand...
Click to collapse
http://www.droidrzr.com/index.php/forum/156-droid-razr-roms-for-the-jelly-bean-kernel-xt912/
Make sure you read the OP and that you match any/all requirements.
Draxin said:
http://www.droidrzr.com/index.php/forum/156-droid-razr-roms-for-the-jelly-bean-kernel-xt912/
Make sure you read the OP and that you match any/all requirements.
Click to expand...
Click to collapse
umm those are the roms that i tried ... i tried 3 of them and not boot... i think its because my version of safestrap.. most of them require 3.11 so what can i do now?
antmiu2 said:
umm those are the roms that i tried ... i tried 3 of them and not boot... i think its because my version of safestrap.. most of them require 3.11 so what can i do now?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1391900
Then you upgrade to 3.11
Draxin said:
http://forum.xda-developers.com/showthread.php?t=1391900
Then you upgrade to 3.11
Click to expand...
Click to collapse
can i updrade from safestrap itself?
because im unable to boot
antmiu2 said:
can i updrade from safestrap itself?
because im unable to boot
Click to expand...
Click to collapse
Yeah crap, I forgot it is a APK
http://www.droidrzr.com/index.php/topic/8771-romrazrcdma-flyingjelly-by-teamlitespeed/#
Have you tried this ROM? Seems to only need a v3 safestrap
Draxin said:
Yeah crap, I forgot it is a APK
http://www.droidrzr.com/index.php/topic/8771-romrazrcdma-flyingjelly-by-teamlitespeed/#
Have you tried this ROM? Seems to only need a v3 safestrap
Click to expand...
Click to collapse
just tried it with no luck,, wont get past safestrap
so i just got my razr, im on 4.1.2 and have bootstrap installed, i want a rom for 4.1.2 that has good battery life, can anyone give me a good rom, and do i just flash is right away??
FaZeApex said:
so i just got my razr, im on 4.1.2 and have bootstrap installed, i want a rom for 4.1.2 that has good battery life, can anyone give me a good rom, and do i just flash is right away??
Click to expand...
Click to collapse
if cdma and you have official OTA verizon kernel:
http://forum.xda-developers.com/showthread.php?t=2229315
Stock
heblu said:
if cdma and you have official OTA verizon kernel:
http://forum.xda-developers.com/showthread.php?t=2229315
Click to expand...
Click to collapse
This will work with my stock official ota for my verizon 4.1.2 with root? Is this the only rom available, sorry for so many questions
Alrighty! So I have a Razr Maxx on Verizon running 4.1.2 JB. I'm looking to flash CM 10.1 on this guy.
So I've figured out that I can root it without a problem. I'm seeing that you can use Razr Blade or ADB. At any rate, i'm trying to figure out if in order to flash CM 10.1, you need to be on stock Firmware. Do I need to be on ICS or Gingerbread (whichever came on Razr) to flash CM 10.1? If so, all the tools that would allow me to do this tell me that one can't go from JB to ICS. Can anyone help out? Also, if i'm correct, you need to first root, then flash. Right? Thanks!
dewie68 said:
Alrighty! So I have a Razr Maxx on Verizon running 4.1.2 JB. I'm looking to flash CM 10.1 on this guy.
So I've figured out that I can root it without a problem. I'm seeing that you can use Razr Blade or ADB. At any rate, i'm trying to figure out if in order to flash CM 10.1, you need to be on stock Firmware. Do I need to be on ICS or Gingerbread (whichever came on Razr) to flash CM 10.1? If so, all the tools that would allow me to do this tell me that one can't go from JB to ICS. Can anyone help out? Also, if i'm correct, you need to first root, then flash. Right? Thanks!
Click to expand...
Click to collapse
Why do you talking about ICS and Gingerbread when you are on JB?
And yes,you can't go back and you don't need to,just root the phone,install BMM or Safestrap and flash the rom.
Sent from my Razr XT910
welder73 said:
Why do you talking about ICS and Gingerbread when you are on JB?
And yes,you can't go back and you don't need to,just root the phone,install BMM or Safestrap and flash the rom.
Sent from my Razr XT910
Click to expand...
Click to collapse
Because I wasn't sure if i had to be on the original Firmware that the phone came with. Alrighty, thank you!
dewie68 said:
Because I wasn't sure if i had to be on the original Firmware that the phone came with. Alrighty, thank you!
Click to expand...
Click to collapse
No problem,happy flashing.
Sent from my Razr XT910
dewie68 said:
Alrighty! So I have a Razr Maxx on Verizon running 4.1.2 JB. I'm looking to flash CM 10.1 on this guy.
So I've figured out that I can root it without a problem. I'm seeing that you can use Razr Blade or ADB. At any rate, i'm trying to figure out if in order to flash CM 10.1, you need to be on stock Firmware. Do I need to be on ICS or Gingerbread (whichever came on Razr) to flash CM 10.1? If so, all the tools that would allow me to do this tell me that one can't go from JB to ICS. Can anyone help out? Also, if i'm correct, you need to first root, then flash. Right? Thanks!
Click to expand...
Click to collapse
Stock Firmware means anything released by Motorola.
The rough process is simple.
Root
Install Safestrap(safer to use) or BMM(many advanced options)
Download the ROM & Gapps(optinal)
Boot into Recovery
Create A rom-slot
flash your ZIP
Reboot
neo.ank said:
Stock Firmware means anything released by Motorola.
The rough process is simple.
Root
Install Safestrap(safer to use) or BMM(many advanced options)
Download the ROM & Gapps(optinal)
Boot into Recovery
Create A rom-slot
flash your ZIP
Reboot
Click to expand...
Click to collapse
This is helpful! Thank you! When put in that simple terms, it's much more clear. Thanks.