I bricked my DX when i installed Sense.Revolution.R5 and then i installed all ****s that can install and my phone was laggy and buggy.But that isn't the problem.I try it to back on stock rom and my phone is dead now.I have RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10.21.40.06U_1.10.40.23_release_295191_signed and i read that i need to remove root accses and lock boothloader...But when i lock it my phone can't turn on anymore...And to back on stock Need to be on...What to do now ?!?!!??!
mefistoreyon said:
I bricked my DX when i installed Sense.Revolution.R5 and then i installed all ****s that can install and my phone was laggy and buggy.But that isn't the problem.I try it to back on stock rom and my phone is dead now.I have RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10.21.40.06U_1.10.40.23_release_295191_signed and i read that i need to remove root accses and lock boothloader...But when i lock it my phone can't turn on anymore...And to back on stock Need to be on...What to do now ?!?!!??!
Click to expand...
Click to collapse
Did you reinstall Stock Recovery before you locked the Bootloader?
No...The first time i install it and the relocked boothloader and then was tottaly dead cuz cant boot and i cant use recovery to flash anything...And i forgot but im afraid cuz if i cant turn on phone and use recovery...So i need to flash stock recovery and relock bootloader and all will be ok ?!
mefistoreyon said:
No...The first time i install it and the relocked boothloader and then was tottaly dead cuz cant boot and i cant use recovery to flash anything...And i forgot but im afraid cuz if i cant turn on phone and use recovery...So i need to flash stock recovery and relock bootloader and all will be ok ?!
Click to expand...
Click to collapse
You need to have an unlocked bootloader in order to flash the recovery. Can you boot into your bootloader screen? If so, you should be able to unlock your bootloader again and then you can flash the stock recovery, relock the bootloader and then run the RUU.
God...Thanks man! You save my DX x10 Youre right...I do what you told me...I was following steps that says phone must be on...Now everything is ok Thank you
One more question...Now everything is stock right ?!?! I can recive and install updates ?
mefistoreyon said:
God...Thanks man! You save my DX x10 Youre right...I do what you told me...I was following steps that says phone must be on...Now everything is ok Thank you
One more question...Now everything is stock right ?!?! I can recive and install updates ?
Click to expand...
Click to collapse
Glad to hear it! :highfive: If you followed those steps you should be back to stock and will be able to receive updates, etc.
Related
Hi all,
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=1837273
everything went good, I have successfully install kernel and CM10. I started phone without sim, wifi is okey and everything is perfect. But when I start phone with SIM card, enter pin, than nothing happens. I have tryed to manualy select carier, but phone just gave me pop up, that is unable to register within my carrier. Does anyone has same error? Could someone help me?
Best Regards,
skodik
skodiko said:
Hi all,
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=1837273
everything went good, I have successfully install kernel and CM10. I started phone without sim, wifi is okey and everything is perfect. But when I start phone with SIM card, enter pin, than nothing happens. I have tryed to manualy select carier, but phone just gave me pop up, that is unable to register within my carrier. Does anyone has same error? Could someone help me?
Best Regards,
skodik
Click to expand...
Click to collapse
Did you unlock your bootloader in order to flash this, or did you already have that unlocked before?
SmG67 said:
Did you unlock your bootloader in order to flash this, or did you already have that unlocked before?
Click to expand...
Click to collapse
Yes, I have unlocked bootloader, according to guide which is in kernel thread...
I think I will try to lock bootloader, load stock kerner and stock rom and try it again ...
skodiko said:
Yes, I have unlocked bootloader, according to guide which is in kernel thread...
I think I will try to lock bootloader, load stock kerner and stock rom and try it again ...
Click to expand...
Click to collapse
first go back to stock kernel and rom and then relock the bootloader.. not the other way around. You'll run into all sorts of trouble if you lock the bootloader while on a custom kernel.
SmG67 said:
first go back to stock kernel and rom and then relock the bootloader.. not the other way around. You'll run into all sorts of trouble if you lock the bootloader while on a custom kernel.
Click to expand...
Click to collapse
Oukej, thanks for advice
Dont you know, if there is any guide where to find stock kernel and rom and how to do this rollback
thx
skodiko said:
Oukej, thanks for advice
Dont you know, if there is any guide where to find stock kernel and rom and how to do this rollback
thx
Click to expand...
Click to collapse
Do a repair with SEUS ( or SUS, since Ericsson no longer takes part ) or PC Companion, and then relock the bootloader using the Repair-button in S1Tool.
SmG67 said:
Do a repair with SEUS ( or SUS, since Ericsson no longer takes part ) or PC Companion, and then relock the bootloader using the Repair-button in S1Tool.
Click to expand...
Click to collapse
Thank you, successfully restored, lets try it again.
I am returning my HTC One, and am trying to put it as close to stock as I can. I have followed other peoples advice, flashing a stock rom and recovery, then relocking the bootloader through fastboot, but once I do that, it wont boot into the rom anymore. It will only boot into HBOOT. Once I unlock the bootloader again, it will boot right into the rom again. What am I doing wrong?
JIM2004 said:
I am returning my HTC One, and am trying to put it as close to stock as I can. I have followed other peoples advice, flashing a stock rom and recovery, then relocking the bootloader through fastboot, but once I do that, it wont boot into the rom anymore. It will only boot into HBOOT. Once I unlock the bootloader again, it will boot right into the rom again. What am I doing wrong?
Click to expand...
Click to collapse
Looks like after relocking you need the Stock ATT RUU to flash it before you can boot the phone which is currently not available . So at this point you wont be able to relock the bootloader , i learnt about it just yesterday when i was trying to exchange my phone.
JIM2004 said:
I am returning my HTC One, and am trying to put it as close to stock as I can. I have followed other peoples advice, flashing a stock rom and recovery, then relocking the bootloader through fastboot, but once I do that, it wont boot into the rom anymore. It will only boot into HBOOT. Once I unlock the bootloader again, it will boot right into the rom again. What am I doing wrong?
Click to expand...
Click to collapse
rom needs to be completely stock and a rooted ROM is not.
gunnyman said:
rom needs to be completely stock and a rooted ROM is not.
Click to expand...
Click to collapse
Hi Gunnyman
although i exchanged my device , just wanted to understand
i got the rooted ODEX rom , unroot it and flash stock recovery and then relocked bootloader but the phone dint get out of the bootloader . you are saying that i should be able to boot into the ROM after relocking without the Stock RUU ?
anilkuj said:
Hi Gunnyman
although i exchanged my device , just wanted to understand
i got the rooted ODEX rom , unroot it and flash stock recovery and then relocked bootloader but the phone dint get out of the bootloader . you are saying that i should be able to boot into the ROM after relocking without the Stock RUU ?
Click to expand...
Click to collapse
yes.
I'm working on getting a stock unrooted nandroid to help folks out
gunnyman said:
yes.
I'm working on getting a stock unrooted nandroid to help folks out
Click to expand...
Click to collapse
thanks for your work
hi i need help. so here is what happened. i have a sprint htc one max. i unlocked the bootloader and rooted the phone. flashed a custom rom on it and had it flashed to page plus and no problems with the phone. when i saw that it could be unlocked. i tried the steps to relock my bootloader and then things when wrong. i relocked my bootloader but now i am stuck in bootloader mode and cant enter recovery. i have been reading in the forums but nothing seems to be a clear solution to me. i tried to install the RUU from sprint and it wont load. i get ERROR 133 (if i am not mistaken) and when i try to find the phone on adb it wont show up. so now i am hoping someone can guide me or show me what i need to do. if not i guess i have a new fancy paper weight hahaha. thanks guys appreciate it.
luisdelvalle1 said:
hi i need help. so here is what happened. i have a sprint htc one max. i unlocked the bootloader and rooted the phone. flashed a custom rom on it and had it flashed to page plus and no problems with the phone. when i saw that it could be unlocked. i tried the steps to relock my bootloader and then things when wrong. i relocked my bootloader but now i am stuck in bootloader mode and cant enter recovery. i have been reading in the forums but nothing seems to be a clear solution to me. i tried to install the RUU from sprint and it wont load. i get ERROR 133 (if i am not mistaken) and when i try to find the phone on adb it wont show up. so now i am hoping someone can guide me or show me what i need to do. if not i guess i have a new fancy paper weight hahaha. thanks guys appreciate it.
Click to expand...
Click to collapse
Does bootloader mode work? If so, you can use the ruu zip on an sd card to fix your phone. You can follow the instructions in my vzw ruu thread for option to. Just make sure you use the Sprint zip instead of mine.
dottat said:
Does bootloader mode work? If so, you can use the ruu zip on an sd card to fix your phone. You can follow the instructions in my vzw ruu thread for option to. Just make sure you use the Sprint zip instead of mine.
Click to expand...
Click to collapse
do you have a link to see how to make the zip file. i was searching and i dont know if i am overlooking it.
:cyclops:
dude. from bootloader, reflash unlock_code.bin you had from htc
then you can flash recovery and restore a backup
japodude said:
dude. from bootloader, reflash unlock_code.bin you had from htc
then you can flash recovery and restore a backup
Click to expand...
Click to collapse
thanks that did it. appreciate it.now i need to see how to unlock the sim on this thing hahaha. ok well now off to read some more
luisdelvalle1 said:
thanks that did it. appreciate it.now i need to see how to unlock the sim on this thing hahaha. ok well now off to read some more
Click to expand...
Click to collapse
i think when you soff it unlocks radio for anysim (i think) otherwise ebay does htc unlock code for a pound!
So today I think I really messed up I will tell you the run down. I first put on twrp and then flashed a custom rom. After that the rom wasn't working properly so I tried to revert back to stock without a backup (I know I am dumb ). After reverting back to stock unsuccessfully I locked the bootloader not knowing that it wouldn't let me launch into the already installed custom software's so now I am stuck in download mode not able to unlock bootloader for some reason and not able to access the rom and the recovery. Any help would be very appreciated. Have I really bricked my phone?
can't you just run an RUU since your bootloader is relocked?
Hello to all of you! I have international model H960A 32gb. It is rooted from day 3. I have some broblems with wifi not turning on.I have to send it to LG here in Greece to check it out. I relocked once the bootloader and have erased the operation system.Is there any way to inject to the phone its original recovery and an original firmware at this point?? If yes,can you share the way??? Thank you all in advance!!
you should know if you unlock or relock the bootloader the phone does a factory reset...
i dont know what you mean by "inject the original recovery and firmware" since you could unlock it again and flash the KDZ you want on it!
- People here think we are Jesus to take care of every minimal thing would happen to their phones and we dont have to say nothing, if you do sh*t with your phone thats your fault since in every thread "how to..." have a disclaimer and the rules to follow, if you do it wrong is because you are lazy to follow the steps.
by now you are on your own, i say what you need to do, you can unlock the bootloader again and flash whatever you want: KDZ or TWRP.
Before you start attacking me,please make sure that you understand what are you reading... I don t ask for any Jesus to save me. I am just asking an answer. It would be more polite to tell me that you simply don t know what i am talking about,or just DONT ANSWER TH F***** question.
Thank you all again. For getting this more clear .... The question is how can i flash an official rom and recovery AFTER i have relocked my bootloader. I need the bootloader to stay locked.
gioarvdv said:
Before you start attacking me,please make sure that you understand what are you reading... I don t ask for any Jesus to save me. I am just asking an answer. It would be more polite to tell me that you simply don t know what i am talking about,or just DONT ANSWER TH F***** question.
Thank you all again. For getting this more clear .... The question is how can i flash an official rom and recovery AFTER i have relocked my bootloader. I need the bootloader to stay locked.
Click to expand...
Click to collapse
i dont think there is a way to flash without unlocking bootloader.cant you just flash stock rom with unlocked bootloader and then just relock it?it will reset everything again.stock rom and recovery.
jass65 said:
i dont think there is a way to flash without unlocking bootloader.cant you just flash stock rom with unlocked bootloader and then just relock it?it will reset everything again.stock rom and recovery.
Click to expand...
Click to collapse
Issue resolved. Thank you all. How to: 1.relocked bootloader. 2. Enter in download mode. 3. Start LGUP. 4. Started with refurbish option but an error was coming up. 5. Tried upgrade option and worked fine.
P.S: before starting LGUP i installed and run UPPERCUT.
Thank you all again.