Related
So, after owning my Transformer Prime for about a month now, I decided to take the plunge and root it. I followed the instructions for ViperMod and had it rooted in no time. I then followed the instructions of unlocking the bootloader and finally installing OTA Rootkeeper.
I've had rooted devices in the past (Droid Incredible) and am familiar with RomManager. So I installed RomManager on the Transformer Prime. I then attempted to create a backup of my "current Rom", which is just stock ICS. RomManager prompted me to update Clockworkmod Recovery, which I did (I now have 5.8.2.0 installed). It then rebooted...acting like it was backing up my current Rom, but when I got back into RM, and clicked "Manage Backups" and there was nothing there. I tried once more with the same result, and ultimately gave up on backing up my current config.
I then downloaded Cyanogenmod 9 (nightly). I selected Google Apps and it proceeded to download. I got an error that the Google Apps portion had an error, but it seemed to work when I attempted to download it again.
I then proceeded to attempt to install the new Rom. The menu came up, asking if I wanted to wipe data and cache, wipe dalvik and backup current rom. I selected all three and hit ok.
My tablet rebooted...quickly, and did not show any signs of installing Cyanogenmod. Sure enough, I got my stock ICS...no Cyanogenmod. I tried again...same thing. I tried a third time, and RomManager hung when I tried to select Ok after the options of backing up, etc. Ultimately I got the error popup, asking if i wanted to wait/report/ok. I hit ok.
I then...very stupidly in retrospect...performed a factory reset from within the phone's settings menu (something I've later read is a big no no). This time, when my phone rebooted, it went straight into Clockworkmod Recovery, which is where I am now. Stuck. I've read a ton and tried everything but had no success.
Strangely, I can find the cyanogenmod file by navigating through "install zip from sdcard", then "choose zip from sdcard", then "clockworkmod", then "download", then "get.cm", then "get" and finally "update-cm-9-20120301-NIGHTLY-tf201-signed.zip". And it allows me to update using this file...even giving me the message "Install from sdcard complete"...but nothing happens. I'm still stuck in Clockworkmod.
If anyone has any advice, I'm begging for your help. Really hoping I didn't ruin my brand new tablet...
Thanks.
only thing rom manager is gold for on the prime at the moment is getting the latest CWM version. other than that, trying to flash a rom, reboot into recovery, or backup doesn't work in rom manager for prime. everything needs to be done through CWM itself. whether flashing a rom or making a nandroid backup. so you have to manually go into CWM and try flashing from there. did you make sure the roms were stored on internal memory to flash(I believe it can only be done on prime this way at the moment)? try a different rom as the CM9 has alot of bugs n issues at the moment. try flashing virtuous rom or a stock modified rom from developement.
also check out developement section for a thread called the Di's n Donts of unlocking and thread called how to or not unbrick your prime. answers you seek are in there.
See my unbricking thread
http://forum.xda-developers.com/showthread.php?t=1514088
Thanks so much for your help guys!
to demandarin: Unfortunately the only ROM I downloaded before everything went haywire was the nightly cyanogenmod 9 from yesterday. And as I explained, that ROM doesn't seem to be flashing for me... I've tried downloading other ROMs onto my SD card, but I can't seem to get my Prime to recognize the SD card in CWM, and I can't figure out any way to get ROMs onto my prime...now that its stuck in recovery. Do you know if I can load ROMs onto my Prime at this point?
to Diamondback: I read your unbricking thread and its given me some hope. It sounds like I'm falling into the "1a" category. I'll have to bunker down tonight and see if I can work through those instructions (I have no familiarity with ADB at this point, which is my main concern). Anyway, I very much appreciate you pointing me in the right direction.
I am curious though, is there some place I can look for clarification on what works in RomManager and what does not? None of that was made clear in the app itself, so I just assumed it was fully functional, like it was on my Dinc. Now I'm paying the price...
Thanks again.
original old thread on CWM on Prime...look through page and people state what works n what doesn't.
http://forum.xda-developers.com/showthread.php?t=1510983
new thread created today on a new updated CWM that should be used. has alot of issues that didn't mesh well with Prime and CWM fixed. seems like you might have jumped the gun a lil early. this is latest version thread. you can also get the latest version through rom manager.
http://forum.xda-developers.com/showthread.php?t=1533697
good luck!
demandarin said:
original old thread on CWM on Prime...look through page and people state what works n what doesn't.
http://forum.xda-developers.com/showthread.php?t=1510983
new thread created today on a new updated CWM that should be used. has alot of issues that didn't mesh well with Prime and CWM fixed. seems like you might have jumped the gun a lil early. this is latest version thread. you can also get the latest version through rom manager.
http://forum.xda-developers.com/showthread.php?t=1533697
good luck!
Click to expand...
Click to collapse
Thanks, but I actually do have the latest version of CWM (5.8.2.0), according to the link you provided. The thing is, I'm just very unfamiliar with CWM, or really any recovery software. The link you posted notes the following improvements:
-Possibly fixes bricks (by properly restoring boot.img)
-Correctly comes with Staging/System unmounted
-Nandroid Restores properly the boot.img (of backups created with this CWM). This means no more issues when restoring a Rom if you are coming from another from (for example, if you are restoring Virtuous after wiping cm9)
Which all sounds great, but I have no idea how to really use any of that... Does "possibly fixes bricks" apply to my situation? I've tried selecting restore and advanced restore through CWM, but in both situations it says "cannot find files", which I'm assuming are the "boot.img" being referenced. So again, it seems like I'm hosed...
I'm just really hoping that Diamondback's unbricking method works for me. Though, I'm having a hell of a time finding instructions on how to setup ADB on my PC (Windows 7). Do you know where I can find good and current instructions?
you can Google it but plenty of YouTube view on how to set up adb.
there's a thread here on it though. take a look: http://forum.xda-developers.com/showthread.php?t=1427008
demandarin said:
you can Google it but plenty of YouTube view on how to set up adb.
there's a thread here on it though. take a look: http://forum.xda-developers.com/showthread.php?t=1427008
Click to expand...
Click to collapse
Thanks again! I think I need a tutorial on how to search XDA more effectively
SUCCESS!
Well, it took some jumping through hoops, but once I got ADB set up successfully, Diamondback's instructions worked like a charm!
For anyone encountering this thread with the same issues as me, I've included links to all of the sources of data I ultimately used.
Thanks so much for everyone's help!
Installing ADB
http://forum.xda-developers.com/showthread.php?t=1427008
http://www.youtube.com/watch?v=ZY4KSrgi-rE
I had to use the PDANet method, referenced in the Youtube video
http://junefabrics.com/android/download.php
Diamondback's Instructions for Unbricking the Prime
http://forum.xda-developers.com/showthread.php?t=1514088
Perhaps I spoke too soon...
My device is no longer bricked, but now I can't access CWM, can't factory reset...can't do anything. I'm stuck with a very broken build of Cyanogenmod 9
Here's the link to my new thread:
http://forum.xda-developers.com/showthread.php?p=23349041#post23349041
First of all, I want to thank everyone working on the CM7, CM9, CM10, SGT7, TWRP, CWM projects for the Nook Tablet. I've really been enjoying trying different ROMs on my Nook Tablet.
I started with CM7, and it ran pretty well. I also tried the CM9 (NX-Fire?) port, and I liked it as well.
I have been using the SGT7+CM10+Cherry Picks and it has been fine up to the 27/9 release. I cannot run anything higher than this on my NT.
I have tried CWM (up to 6.0.1.2) and TWRP (up to 2.2.2.0) to flash the newer ROMS, but the ROMS will not boot. The screen blanks, and after a time, it goes back to the boot screen.
I also can't seem to use the CWM 6.0.1.5 or TWRP 2.3.1.1 from the SGT7+CM10 thread.
I know I have the 16GB Nook Tablet. I have repartitioned the userspace, as mentioned in other threads. I can't help but feel like I'm missing a step somewhere.
Presently, my NT is running TWRP 2.2.20 and SGT7+CM10+Cherry Picks 27/9. Any one have any hints? A thread on the boards I have missed? Any help would be appreciated.
Again, thanks for all the hard work!!
Hi,
TWRP 2.2.2 has a flashing bug that causes updating recovery with current script to fail.
You must manually update to newer version and after that recovery update packages will function as descripted
Moved. Questions belong in the Q&A section.
Thanks
AvRS
demetris_I said:
Hi,
TWRP 2.2.2 has a flashing bug that causes updating recovery with current script to fail.
You must manually update to newer version and after that recovery update packages will function as descripted
Click to expand...
Click to collapse
Thanks! I'll try that this weekend. I knew I was missing something.
demetris_I said:
Hi,
TWRP 2.2.2 has a flashing bug that causes updating recovery with current script to fail.
You must manually update to newer version and after that recovery update packages will function as descripted
Click to expand...
Click to collapse
Sorry, but how does one manually update a recovery? I've tried flashing the newer TWRP from CWM as well (from an older version of CWM), and while the flash doesn't fail, it won't let me boot into TWRP, and the new CWM crashes before I can do anything. I've also tried flashing the recovery from fastboot, but I get a "bad boot magic" error when I try to boot.
Just flashed couple of days ago: pretty nice ROM
Besides annoying "SD card unmounting" problem I found that B&N Nook app does not work, it just keeps restarting, some error message shows up but goes away so quickly I can't read it. I wiped before I installed the ROM and reinstalling the app didn't help.
Please post a link to cwm 6 please, i need to install cm10 without it freezing and crashing
Sent from my Nook Tablet using xda app-developers app
jnorrisman said:
Please post a link to cwm 6 please, i need to install cm10 without it freezing and crashing
Sent from my Nook Tablet using xda app-developers app
Click to expand...
Click to collapse
There is a search function on here...
Sent from my NOOK Tablet running CM10
jnorrisman said:
Please post a link to cwm 6 please, i need to install cm10 without it freezing and crashing
Sent from my Nook Tablet using xda app-developers app
Click to expand...
Click to collapse
The OP in the developers section has links to both CWM and TWRP for your use. Remember, SEARCH is your FRIEND!
play store/goomanager closing
First let me say this rom is awesome! I had no idea my nook could run this smoothly. The only problem I seem to have is that on the newest build(10/25) both playstore and goo manager will open then close. I have tried clearing the app cache, re flashing rom and gapps, full wipes then reflash. I also tried reflashing the newest gapps without success. The 10/12 build works with both play store and goo manager. I am using the 10/12 build now so no worries if it can't be fixed. Again thanks for the time and effort on an awesome rom:good:
edit: I am using the latest twrp for my recovery (also awesome). the tablet is the 16gb version
Same problem as OP, latest SGT7 not loading
I am having the exact same problem as Byron and Spurious. I've really enjoyed this series of ROMs up until the last couple, which give the same symptoms as described in the OP - the ROMs will appear to load up to a certain point, then the device reboots. For me, the the device will load up to a seemingly random point -- sometimes it will reboot itself during the boot animation, and once it got all the way to the point where it starts updating the applications. But it never actually finishes booting up before it reboots itself.
In addition, the latest CWM and TWRP do not work for me. TWRP does not come up at all, and sometimes CWM will come up and I can move around the menus for a few seconds, then it hangs. It happens whether they were flashed via fastboot or SD, I've tried every combination. I can fastboot back to TWRP 2221 or CWM 6013 and they work fine.
I've been keeping my NT (16G) updated with the latest builds since early ICS and everything has worked as described up until now. I follow all instructions to the letter as regards to wiping, etc. so I don't think I'm doing anything wrong.
Is anybody else having the same issue with these latest ROMs? Byron, Spurious - did you get yours sorted? Could it be a hardware issue?
jarvz said:
I am having the exact same problem as Byron and Spurious. I've really enjoyed this series of ROMs up until the last couple, which give the same symptoms as described in the OP - the ROMs will appear to load up to a certain point, then the device reboots. For me, the the device will load up to a seemingly random point -- sometimes it will reboot itself during the boot animation, and once it got all the way to the point where it starts updating the applications. But it never actually finishes booting up before it reboots itself.
In addition, the latest CWM and TWRP do not work for me. TWRP does not come up at all, and sometimes CWM will come up and I can move around the menus for a few seconds, then it hangs. It happens whether they were flashed via fastboot or SD, I've tried every combination. I can fastboot back to TWRP 2221 or CWM 6013 and they work fine.
I've been keeping my NT (16G) updated with the latest builds since early ICS and everything has worked as described up until now. I follow all instructions to the letter as regards to wiping, etc. so I don't think I'm doing anything wrong.
Is anybody else having the same issue with these latest ROMs? Byron, Spurious - did you get yours sorted? Could it be a hardware issue?
Click to expand...
Click to collapse
Sort of. I figured out what I was doing wrong flashing the recovery from fastboot (you apparently have to extract the .img file from the zip) but was still having the exact same issues with CWM and TWRP as you. I've managed to get a newer version of CWM installed without it hanging by using the 5 touch enabled one from here. Using this I still have the same issues with the meghd00t rom going into a bootloop though.
I noticed OP said he has repartitioned his Nook, and I have as well. I wonder if this could be causing problems, have you done this as well, jarvz? Does anyone else have any input about if repartitioning could effect this?
spurious_access said:
Sort of. I figured out what I was doing wrong flashing the recovery from fastboot (you apparently have to extract the .img file from the zip) but was still having the exact same issues with CWM and TWRP as you. I've managed to get a newer version of CWM installed without it hanging by using the 5 touch enabled one from here. Using this I still have the same issues with the meghd00t rom going into a bootloop though.
I noticed OP said he has repartitioned his Nook, and I have as well. I wonder if this could be causing problems, have you done this as well, jarvz? Does anyone else have any input about if repartitioning could effect this?
Click to expand...
Click to collapse
Yes I have repartitioned mine as well, so that must be it. I was hesitant to go to the 5-touch because it was indicated in the thread that there was no way back after you do the firmware update, and so far there is only one rom that worked with the new firmware, so I didn't want to take a chance.
At least I'm pretty sure I'm not doing anything wrong, lol.
jarvz said:
I was hesitant to go to the 5-touch because it was indicated in the thread that there was no way back after you do the firmware update, and so far there is only one rom that worked with the new firmware, so I didn't want to take a chance.
At least I'm pretty sure I'm not doing anything wrong, lol.
Click to expand...
Click to collapse
Yeah, I don't have the new touch firmware installed either. CWM worked fine, though TWRP didn't seem to work properly (maybe it needs the new touch firmware?).
Do you know if there is any mention of re-partitioning causing an issue? I looked in the rom dev thread but didn't notice anything. I guess one of us who are seeing this issue could post there to see if anyone knows what could be causing this.
I finally got it to work. My PC is running Ubuntu, so YMMV.
Here is what I did:
1. Used "gparted" to create 2GB FAT32 partition that is bootable.
2. Used the instructions in the this thread thread to create a bootable SD disk that boots into CWM 6.0.1.2.
3. CWM 6.0.1.5 just doesn't seem to work on my Nook Tablet. So, I downloaded CWM 6.0.1.3 from here
4. I downloaded the latest ROM here
5. Downloaded the latest gapps: here
6. Copied the CWM, ROM, and gapps to the SD disk.
7. Inserted the SD and booted the Nook Tablet.
8. On first boot, it boots to CWM 6.0.1.2, so I flashed the CWM 6.0.1.3, and rebooted.
9. This time it boots to Cyanoboot, so I entered the boot menu and selected EMMC Recovery.
10. From CWM 6.0.1.3, I formatted /storage, and did a factory wipe. (I didn't format /storage the first time, and the wireless would not come up.)
11. Installed ROM from SD card.
12. Installed gapps from SD card.
13. Rebooted, this time letting cyanoboot boot from EMMC.
14. Profit!
I haven't tried 6.0.1.4 to see if that would work.
Before doing my flash, I did my research, and it seemed that in order to update from CM7 to CM10, I had to flash a different version of CWM. So I booted into recovery, flashed the version 6.xxx CWM, and then rebooted (I assumed that in order to flash CM10, I had to be in a CM10-compliant recovery). After getting back to my regular desktop, I rebooted into recovery as normal... only it didn't go into recovery. Instead, it paused for a moment like it would go into recovery, then booted to my normal desktop.
I've tried about a billion ways to boot into recovery, to include SD based recoveries, but it either goes to a larger sized N screen, then hangs up on a black screen, or it boots me to my normal CM7. I "can" continue to operate on CM7, but until I can boot into recovery, I can neither update to CM10 nor address any problems I come across in my current build.
Suggestions?
nashdude said:
Before doing my flash, I did my research, and it seemed that in order to update from CM7 to CM10, I had to flash a different version of CWM. So I booted into recovery, flashed the version 6.xxx CWM, and then rebooted (I assumed that in order to flash CM10, I had to be in a CM10-compliant recovery). After getting back to my regular desktop, I rebooted into recovery as normal... only it didn't go into recovery. Instead, it paused for a moment like it would go into recovery, then booted to my normal desktop.
I've tried about a billion ways to boot into recovery, to include SD based recoveries, but it either goes to a larger sized N screen, then hangs up on a black screen, or it boots me to my normal CM7. I "can" continue to operate on CM7, but until I can boot into recovery, I can neither update to CM10 nor address any problems I come across in my current build.
Suggestions?
Click to expand...
Click to collapse
Have you tried holding on the power button and the "n" button as you boot? I recall running into a similar issue as yours and that was the only way I could get to recovery. If you're able to get into recovery that way I would consider maybe getting a different version fo CWM. I had trouble with the 6.0.1.5 version. You might try the 6.0.1.2 version here: http://forum.xda-developers.com/showthread.php?t=1640958&page=5
I ran into something similar when I tried installing CWM 6.x.x. I chickened out and decided to run CM10 from SD instead, and I'm so happy on the performance now that I do!
I did the "unbrick" thing with "repart.img" to get the Tablet back to "out of the box" state and sighed of relief when it worked!
Yeah, I was afraid of that. I really didn't wanna go through the process of unbricking, but I guess there's no help for it.
troy9829 said:
Have you tried holding on the power button and the "n" button as you boot? I recall running into a similar issue as yours and that was the only way I could get to recovery. If you're able to get into recovery that way I would consider maybe getting a different version fo CWM. I had trouble with the 6.0.1.5 version. You might try the 6.0.1.2 version here: http://forum.xda-developers.com/showthread.php?t=1640958&page=5
Click to expand...
Click to collapse
Power + 'n' doesn't work on my NT either, I have to turn the device off, insert the SD with CWM, then plug in the (still turned-off) NT to a wall charger and allow it to boot up that way - then (and only then) do I boot into recovery, and without touching any buttons. Hopefully that helps
Dang, whoever thought this would be such a booger of a deal?!?
Okay, first off, let me apologize for coming off like a noob, but it seems there's so much information out there that everything's kinda bleeding together, so let me tell you where I'm at.
I've unbricked and restored the NT to stock 1.4.2
I tried rooting, but the only root I can find that is flashable from SD is the 5.5 CWM which is older than the CWM 6.xxx that every CM10 version calls for. So I went ahead and did the root, so now I have a stock NT with root access. This is where I'm getting stuck...
I'm at this point...
http://forum.xda-developers.com/showthread.php?t=1640958&highlight=cwm+1+4+2
...and it apparently requires you to reboot into CWM in order to install CWM?!?
I've found the CWM 6+ files I think I need, but when I try to follow the instructions, my NT won't kick over into recovery---it keeps booting straight to the rooted 1.4.2 stock rom. I've found guides that take you from stock 1.4.3 to CM10, some that take you from 1.4.2 to root, and I even found Indirect's CM7 (without the instructions on how to get CWM on there in the first place!). I even downloaded Rom Manager and tried to boot into recovery that way, but it said there was my device wasn't supported.
I've been staring at this dang screen for three hours, trying to find a step by step, and I'm coming up empty. Maybe I'm just too frustrated at this point and need a breather.
What I need to know is how to install CWM 6+ on a NT that's either rooted or stock 1.4.2 (I still have the unbrick SD card) so that I can boot into CWM. From there, I can make my way through installing CM10. Help. Please. Am about to chew the lining out of my cheek.
I don't know if this might be helpful? http://forum.xda-developers.com/showthread.php?t=2037368
Sent from my NookColor using Tapatalk 2
Not yet. I was expecting OTA to kick in, updating my current 1.4.2 to 1.4.3, but it hasn't. Honestly starting to think my NT doesn't want to be rehacked LOL
Okay, so here's what I'm doing at the moment...
I'm at rooted stock. I moved CWM 6.0.1.2, CM10, and gapps over to internal SD.
I booted into recovery with an older version CWM SD card (SD card image with Win32 > turned off NT > insert SD > plug in USB to autoboot)
While in recovery (from SD), I flashed CWM 6.0.1.2 , CM10 (meghd00t), and gapps-jb-20121011.
I reboot...
WE HAVE JOY!
Now to check to see if the thing's gonna run right (got a whole lotta "XYZ has stopped" error messages upon boot up)
Dangit, keep getting those error messages about Gapps stopping and Google Play, and other stuff. Not allowing me to do hardly anything I need to. I can't even boot into recovery from the home page---it still loads straight to the Rom. In order to get into recovery, I need to use the SD that I made to get into recovery in the first place. Going to wipe dalvik and the other caches to see if that helps...
After wiping the caches, I boot into CM10 with no error messages. I DL'd a game from my Gmail account, and it appears to be working properly. Thanks for the suggestions and for letting me vent
I just went thru this similar ordeal too. It took me over 3 weeks to finally find a recovery & cm10 combo. What I found is that I couldn't get ANY version of twrp to act right. Indirect's flashing tool was invaluable. I finally used it to flash a cwm 6.x from Laverne's thread. It seems that not all versions of cwm 6.x are compatible with certain cm10 roms too & by chance I hit a combo that finally worked! I'm staying with what I got for a while!
Sent from my Nexus 7 using Tapatalk 2
Hi all
ok so i'm a bit nervous writing this expecting all manner of attack in that i may be posting something that's been posted before lol, i've been working on this phone from start to finish about 9 hours, over two days..... i've googled just about every combination of words to do with the title and everything in between but nothing seems to come close to what i actually need to do as nothing works
i have an LG Optimus 2x / p990, it had ICS on it but was far too slow to handle this, it needs something a bit less hardware intensive to run smoothly, so i went ahead an found cyanogenmod stable ...... 7.2 i installed sdk after an hour of finding out how it works i finally got adb and fastboot working, i then needed this, that, this, that, etc etc etc.....
to cut a 9 hour story short, i've managed to get myself to the point where i wiped the phone of everything but CWM partioned for ics via the AIO software but CWM will not let me install any ROM onto the phone. to be more precise it says i have installed CM 7.2 successfully! (i've tried this via the CWM via external SD card and sideload) i reboot the phone it's as if i've never done a thing, no trace or suggestion i've even attempted it on the internal card... nothing
i'm at the point now where i'm quite happy to just have my phone back now and install ICS 404 but can't use the LG kdz install software as the pc doesn't see the phone as an LG p990 because it's recovery and i can only get it to come up as internal and external memory cards
i'm not really a noob when it comes to tech stuff but this little phone has me stumped.... please, i'm begging you, help me any operating system that can get my phone working will do, preferably the CM 7.2 if not back to ICS 404?
and i know, i know i should have backed up but i had no idea it could be so complicated just to put an OS on a tiny computer
ETA i've tried that exitrecovery.zip thing and it did nothing :/
It's quite simple
Try to reset and unroot/re-lock the phone then unlock and root, then what you need to do is get ROM Manager and get the Clockwork Recovery and the version that supports your device, although you might need to hook up your phone to your computer for the process to work.
Also put back in ICS 4.0.4 when unrooted and re-locked again like stock and make sure it's the stock file for your phone.
And after you got ROM Manger and the Clockwork Recovery
Then just in Clockwork wipe out all data on the device and don't do a factory reset in Android just with clockwork and delete everything that was made on that phone then install CyanogenMod.
After that it will seem to take a long time or just a while to boot up and then it boots faster then the original ROM.
If you have Clockwork Recovery just wipe out all the data while it's still in there and you should be set.
When it was my first time putting in CyanogenMod it was 10.1 RC1 on my Nexus 7 and it didn't work and forever bootlooped, and that was because i forgot to wipe the device. Then after going into Recovery with Clockwork I deleted all the data of my tablet and it worked but took 5 mins. to boot up which is nomal.
And if Clockwork doesn't work, do the same with TWRP (Team Win Recovery Project) and download that which can be found here teamw.in/project/twrp
If you don't want to get ROM Manager or that one isn't working then try this website to get Clockwork because it has the whole list of devices and I recommend downloading from the website instead of their app. clockworkmod.com/rommanager
cheers for that, i've tried all of the above still to no avail, having a think about it the phone is partioned for ics, i'm trying to install CM 7.2 which as i understand isn't ICS so.... maybe the error is that it's a different partioning sequence/setup i'm gonna go for CM 10.1 and see if that makes a difference.
to add i'm not sure why everyone rants and raves about CWM, TWRP seems much more complete and advanced do you (or anyone else) know the main differences?
twelfty said:
cheers for that, i've tried all of the above still to no avail, having a think about it the phone is partioned for ics, i'm trying to install CM 7.2 which as i understand isn't ICS so.... maybe the error is that it's a different partioning sequence/setup i'm gonna go for CM 10.1 and see if that makes a difference.
to add i'm not sure why everyone rants and raves about CWM, TWRP seems much more complete and advanced do you (or anyone else) know the main differences?
Click to expand...
Click to collapse
TWRP has a completely touch driven interface that is 100% themeable, while CWM has a touch version and non-touch version. Also TWRP has a built in file manger and terminal emulator where as CWM does not. A lot of people like TWRP because it provides a lot of good features with a simple and straightforward yet powerful user interface. I would recommend taking a look at this guide if you want more information on the differences between the two http://www.droidiser.com/2013/04/twrp-vs-clockworkmod-recovery.html?m=1.
Sent from my SCH-I535 using xda premium
ok i managed to do it i can't remember exactly how but some good links and info for anyone who stumbles across this in need of help
i went for cyanogenmod 10.1 to make this work i used this AIO tool - http://forum.xda-developers.com/showthread.php?t=2020737
repartioned with OLD partion layout and BL
installed TWRP (included in the aio)
if you need to reinstall the google play store make sure you have right version if you flash it and get "unfortunately setup wizard has stopped" repeatedly you have the wrong version see this link for which one you need http://wiki.cyanogenmod.org/w/Gapps
obviously make sure you have adb and fastboot setup and drivers too.... it's a long process installing the entire sdk, personally for flashing this once and most definately not inclined to do it again i'd go with just the adb and fastboot rather than the whole sdk
also i found a keyboard error with 10.1 where i'd type 1,2 or 3 characters and the keyboard would minmise not sure if there's a proper fix (i found one thing where you disable the autocorrect but didn't want to do that) so i decided to download and install hackers keyboad which is based on the gingerbread keyboad and is much better and comes with full features and integrates nicely
coupled with the info above from YoyoscratchMC and you should be in the field
good luck to all i was ready to jump out my window with my phone first so i could land as hard as possible on it last night but i got there in the end lol
Here is a little background;
I'm new to the android world and this is my first tablet using it. I received the tablet under the terms that its mine, if I can fix it. THE TABLET So the research begins. The original problem with the tablet: everything would crash after unlock screen, including loader. The tablet does not have any kind of visual recovery mode using the hard buttons. At this time I did not know about any of the tools that I probably could of used to save the stock firmware. When I hit Google with "Cruz velocity micro t510" not much came up, so I spent about a day trying all sorts of different terms with that. There was not even a place to download firmware from cruz, they say wifi is mandatory to upgrade, from within the tablet... I finally ran into a post somewhere where someone said the cruz t510 is an allwinner a10 in disguise. They went on to say that all you need to do is use Livesuit and flash 'sun4i_crane_T05a_v1.5_mxc6225' img from eken website then from there you can use the compatability zip and upgrade to cm10.
So all was good. The t05a firmware there works perfect on it, like the guy said. I kept that on there for a day before I went on to CyanogenMod.
Here is where I am stuck; (Tired of googling, please help )
I decide to try AOKP and CM10 using http://forum.xda-developers.com/showthread.php?t=1821398 and one for AOKP too with t05a-v1_compatibility_1.2.x.zip. And http://forum.xda-developers.com/showthread.php?t=2189640 for recovery mode. I learned how to setup and use ADB with command prompt here.
So I install CWM using ADB shell and reboot into recovery using the sh file. I first folowed the steps to install AOKP and all goes smoothly until I reboot.
I get a notice saying "Damaged SD Card, You may need to reformat" and I realize that it is talking about the internal disk space. I try to reformat and the same notice will appear again or I will have to go in Settings>Storage and Mount SDcard, only to be told no, it is damaged. So I got scared and re-flash back to the eken stock firmware with livesuit. Guess what, sdcard mounted and working again. Then I go on to repeat the upgrade but with CM10 this time. Same result.
I have gone back to the stock image and retried many times. I tried with all three partition versions of that CWM I use, even though I knew it was 10, or so adb shows. I also tried partitioning and formmating with CWM, many times, each a little different.
Short, Sweet, and Simple version;
THE TABLET
Eken a90 stock firmware using livesuit -> SDCard works fine
CM10 or AOKP with t05a-v1_compatibility_1.2.x.zip using CWM 6.0.2.8 -> SDCard damaged
If anyone could help I would very much appreciate it. I need a break from all the research, I'm going to play gtav and hope someone has a solution for me.
I'm trying to upgrade my T510 from original manufacturers specs and could sure use whatever files uou have