Disclaimer
Code:
/*
* You may void your warranty.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about this kernel.
* YOU are choosing to make these modifications to your device.
* I absolutely disclaim all the responsibilities.
[COLOR="Red"] * Flashing kernel requires unlocked bootloader.
[/COLOR] * You can unlock your bootloader from [URL="http://unlockbootloader.sonymobile.com/"][COLOR="Blue"][U]here[/U][/COLOR][/URL].
*/
Frankly, I don't like fancy or bloated OP's. So I kept thread simple and clean. Changelogs are not posted here. Check link in description. FYI, this kernel is comaptible with CM9/Stock ICS based ROMs.
All the best!
Click to expand...
Click to collapse
Features :-
Code:
* Based on Latest Official sources
* LINARO 4.8 Optimized
* Removed debugging s**ts
* Added Frandom
* O2 Optimizations
* Salvaged RAM
* Integrated CWM
* ARM_THUMBEE Support
* CIFS, NTFS , FUSE as external Modules
* CleanCache
* ZRAM/SWAP support
* init.d support
* Google Snappy Drivers
* Ext 2/3/4 Support
* Integrated WiFi modules
* adb server is persistent
* usb debugging enabled
* rootfs and /system mounted as rw
* Other tweaks and patches
* ro.secure=0 : Root exploit enabled via adb
* Governors : Smartass2
OndemandX
Performance
Ondemand
Interactive
Powersave
Conservative
MinMax
Hotplug
Pegasusq
Wheatley
OndemandQ
InteractiveX
* IO Shedulers : sio
deadline
noop
cfq
VR
row
zen
* [COLOR="Red"]See change log or commits for detailed info.[/COLOR]
[/B]
Code:
[COLOR="Purple"]Root Binary[/COLOR] : ( Flashable via recovery )
* SuperSU : [URL="http://download.chainfire.eu/204/SuperSU/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
* Superuser : [URL="http://androidsu.com/superuser/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
Code:
[COLOR="Purple"]Instructions[/COLOR] :
* Flash the boot partition with the kernel in fastboot mode.
* Guide : [URL="http://forum.xda-developers.com/showthread.php?t=1879982"][COLOR="Blue"][U]Here[/U][/COLOR][/URL]
Credits :
Doomlord : for his init.d script
@nthr@xNine9 : for testing
Github : Source
Click to expand...
Click to collapse
F.A.Q's :-
1. Is this working on blah blah?
> I don't know. Do some research. Keep the disclaimer in mind.
2. OMG! My device rebooted/crashed/exploded?
> Get me the logcat. Check for any conflicting scripts in init.d
3. Battery drains like hell. WTF?
> Not kernel problem. It's your apps that are waking up device from deep sleep. Check the wakelocks. I don't build kernels to worsen battery life. See here for more info.
4. Signal is dropping since I flashed the kernel?
> Again. Not the kernel problem. Check if you have latest ( and proper ) baseband for your device.
5. Is it pre-rooted ?
> Autoroot isn't included. Just download flash-able zip from site. Users may prefer supersu/superuser.
6. App FC's or something crashes?
> Try reinstalling app again. Give me logcat if problem persists.
7. Does this kernel has X or Y mod?
> Do some research. Check thread, repo, commits etc.
8. Which governors/IO-schedulers to use?
> Depends on your usage. See here for more info.
9. I need more info on something?
> You can find all answers here
Changelog and Downloads
Code:
[CENTER]CODENAME OF XPERIA SOLA: [COLOR="Red"]PEPPER[/COLOR][/CENTER]
Code:
[CENTER]CODENAME OF XPERIA U: [COLOR="Red"]KUMQUAT[/COLOR][/CENTER]
Code:
[center]
[U][URL="http://www.mediafire.com/?r29d2lqkgut52"][COLOR="BROWN"]Download Kernel[/URL][/U][/COLOR][/center]
Code:
[CENTER][URL="https://github.com/rachit-rc96/Vengeance-Kernel-U8500/blob/master/Changelog.txt"][COLOR="RED"]Changelog[/URL][/COLOR][/U][/CENTER]
Cleaned the thread.
Please don't post benchmark comparisons. It's against XDA rule. I wont answer to any benchmark related queries.
Every development is unique.
Thanks! All the best!
sd card still not working the same error as last time that sd card safe to remove
everything else fine
really gud kernel infact best kernel available for sola:victory::good:
want to try :laugh::good:
notification still said "SDcard safely to remove"...
Rachit Rawat said:
Please don't post benchmark comparisons.
Click to expand...
Click to collapse
Then explain me, why the phone working slower with OC up to 1,3ghz with yours kernel than on the other kernel without OC. Apps, processes are the same.
And what is "SmartOverclock"?
Thanks a lot for your hard work and Sorry for my noobish questions.
Re: [KERNEL][ICS] Vengeance [1.22][27/02/13]
Links updated . Hopefully, sd card should work now.
xperia sola work 1.3 ghz ?
alivanov79 said:
Then explain me, why the phone working slower with OC up to 1,3ghz with yours kernel than on the other kernel without OC. Apps, processes are the same.
And what is "SmartOverclock"?
Thanks a lot for your hard work and Sorry for my noobish questions.
Click to expand...
Click to collapse
What is the matter with u y u so obsessed with benchmark and for ur knowledge benchmark are not 100% right
and i have checked the performance the gaming and apps speed is much much faster
try urself and thank the maker for his efforts
Rachit the problem has been fixed thank u so mch
ashwin prabhunerurkar said:
What is the matter with u y u so obsessed with benchmark and for ur knowledge benchmark are not 100% right
and i have checked the performance the gaming and apps speed is much much faster
try urself and thank the maker for his efforts
Rachit the problem has been fixed thank u so mch
Click to expand...
Click to collapse
Is it stable at 1.3 gigahertz? Not heating up too much?
overclocking to 1.3 ghz nice! Hope to see gpu overclocking too
ChongWiz said:
Is it stable at 1.3 gigahertz? Not heating up too much?
Click to expand...
Click to collapse
no heating for me till now and battery drain less than i expected all in all very nyc effort:laugh:
Re: [KERNEL][ICS] Vengeance [1.22][27/02/13]
Changelog links fixed.
can someone mirror the download link?i dont have mediapro account.,
thanks
jzpokz said:
can someone mirror the download link?i dont have mediapro account.,
thanks
Click to expand...
Click to collapse
I dont think an account is needed for download.....
@[email protected] said:
I dont think an account is needed for download.....
Click to expand...
Click to collapse
my fault.,DL done.,
thanks btw
i now use 1.3 ghz .and play nfsmw cpu cold
Flashed the kernel, but windows just doesn't recognize my device now... Any tricks?
/EDIT: Solved, had to disable USB debugging. By far the best kernel for Sola. THX!
please, make this kernel with touch recovery or add mounting sd\sd_ext in that
thanks
Related
Disclaimer
Code:
/*
* You may void your warranty.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about this kernel.
* YOU are choosing to make these modifications to your device.
* I absolutely disclaim all the responsibilities.
[COLOR="Red"] * Flashing kernel requires unlocked bootloader.
[/COLOR] * You can unlock your bootloader from [URL="http://unlockbootloader.sonymobile.com/"][COLOR="Blue"][U]here[/U][/COLOR][/URL].
*/
Frankly, I don't like bloated and fancy OP's. So I kept the thread simple and clean. Changelogs are not posted here. Check the link in the description.
All the best!
Click to expand...
Click to collapse
Features :-
Code:
* Based on official 4.1.B.1.13 sources
* Compiled using LINARO Toolchain
* Added smart overclocking support upto 1.6 GHz
* Init.d support
* Low Memory Killer
* All new modules from 4.1.B.1.13 sources
* Swap and zram support
* ext2/3/4 support
* Added CWM recovery
* CIFS, NTFS AND FUSE
* Memcopy and compaction
* Added Cleancache
* SLUB patch
* LZO compression
* 2 way call recording
* Google Compression/Decompression Drivers
* Added network optimizations tweak
* Added memory tweaks
* Added other miscellaneous optmizations
* Governors : + Interactive
+ Ondemand
+ Performance
+ Userspace
+ Powersave
+ Conservative
+ InteractiveX
+ OndemandX
+ Smoothass
+ Brazilianwax
+ Smartass2 ( Tweaked )
* IO Schedulers : + Noop
+ SIO - default
+ CFQ
+ Anticipatory
+ deadline
* [COLOR="Red"]See changelog or commits for detailed info.[/COLOR]
[/B]
Code:
[COLOR="Purple"]Root Binary[/COLOR] : ( Flashable via recovery )
* SuperSU : [URL="http://download.chainfire.eu/204/SuperSU/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
* Superuser : [URL="http://androidsu.com/superuser/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
Code:
[COLOR="Purple"]Instructions[/COLOR] :
* Flash the boot partition with the kernel in fastboot mode.
* Guide : [URL="http://forum.xda-developers.com/showthread.php?t=1879982"][COLOR="Blue"][U]Here[/U][/COLOR][/URL]
Credits :
shardul_seth : For his CWM
Doomlord : For his Android Toolchain
All brave testers
Github : Source
Click to expand...
Click to collapse
F.A.Q's :-
1. Is this working on blah blah?
> I don't know. Do some research. Keep the disclaimer in mind.
2. OMG! My device rebooted/crashed/exploded?
> In case of bootloop, check for conflicting scripts in init.d. If problem persists, get me the logcat.
3. Battery drains like hell. WTF?
> Not kernel problem. It's your apps that are waking up device from deep sleep. Check the wakelocks. I don't build kernels to worsen battery life. See here for more info.
4. Signal is dropping since I flashed the kernel?
> Again. Not the kernel problem. Check if you have latest ( and proper ) baseband for your device.
5. WiFi won't work?
> Flash modules.zip
6. Is it pre-rooted ?
> No. Autoroot isn't included. Just download flash-able zip from site.
7. App FC's or something crashes?
> Try reinstalling app again. Give me logcat if problem persists.
8. Does this kernel has X or Y mod?
> Do some research. Check thread, repo, commits etc.
9. Which governors/IO-schedulers to use?
> Depends on your usage. I recommend ondemandX + SIO. See here for more info.
10. I need more info on something?
> You can find all answers here
Changelog and Downloads
Code:
[CENTER]CODENAME OF NEO : [COLOR="Red"]HALLON[/COLOR]
CODENAME OF NEO V : [COLOR="Red"]HAIDA[/COLOR]
CODENAME OF NEO L : [COLOR="Red"]PHOENIX[/COLOR]
[/CENTER]
Code:
[center][U]
[URL="http://www.mediafire.com/?kb784mb7ai4o8"][COLOR="BROWN"] Download Kernel [/COLOR][/URL][/center][/U]
Code:
[CENTER][URL="https://github.com/rachit-rc96/Vengeance-Kernel-MSM7x30/blob/master/Changelog.txt"][COLOR="RED"]Changelog[/URL][/COLOR][/U][/CENTER]
Screenshots is be usefull for members
...:: [email protected]€m!c Quote: Face Your Insanity !!
Pandemic said:
Screenshots is be usefull for members
...:: [email protected]€m!c Quote: Face Your Insanity !!
Click to expand...
Click to collapse
Screenshoots of what it's a kernel.
Pandemic said:
Screenshots is be usefull for members
...:: [email protected]€m!c Quote: Face Your Insanity !!
Click to expand...
Click to collapse
It's a kernel.... Unlike a Rom bro....!
Sent from my MT11i using xda premium
is this based on ics stock kernel? how's the 3d 2d performance of this kernel?
bk1on1 said:
is this based on ics stock kernel? how's the 3d 2d performance of this kernel?
Click to expand...
Click to collapse
its same as lupus n allaince
Sent from my MT11i using xda premium
Tenacius D said:
Screenshoots of what it's a kernel.
Click to expand...
Click to collapse
Ten D nice to see you again
you have a thanks button and don't know what to do with it...?
just press.it!
Is this 3.0.x kernel? I'm away form pc so i can't check.
Sent from xda app
Piter577 said:
Is this 3.0.x kernel? I'm away form pc so i can't check.
Sent from xda app
Click to expand...
Click to collapse
Nah,I don't think so.... To be honest!
Still good to have a kernel as Roms are more common!
Sent from my MT11i using xda premium
Hello guys,
I was going through auto root script today and found one error.
Code:
/sbin/busybox chmod [COLOR="Red"]4755[/COLOR] /system/xbin/su
Due to this incorrect permission which should be 6755, your su should not work.
Any confirmations?
@rachit.rc96
What recovery is in kernel ?
TNX
sasa g said:
@rachit.rc96
What recovery is in kernel ?
TNX
Click to expand...
Click to collapse
CWM 5
Can you include TWRP??as Jb kernel has it already! Or would it be too much considering wedgess is also goin to add it.... I heard so!
Sent from my MT11i using xda premium
Updated
hey , my wifi is not working after flashing 1.23 . i tried flashing stock .587 modules and then flashed given modules... no luck
harsh586 said:
hey , my wifi is not working after flashing 1.23 . i tried flashing stock .587 modules and then flashed given modules... no luck
Click to expand...
Click to collapse
+1 same rom same problem.......... i really don't want reflash rom and all apps
Re: [KERNEL][ICS] Serene [NEO V][1.23][17/01/13][4.1.B.1.13 BASED]
Hello,
This is to inform all of you that's currently WiFi is not working on 1.23 .. I'll check that... Till then , if WiFi is your priority, then revert back to 1.21 and fix it.
Thanks
ext4 not recognized
Hi, after installing this kernel it booted fine, but the second sd partition on ext4 wasn't recognized (i.e. apps from link2sd were dead).
Eager to see a new release
Cheers
rachit.rc96 said:
Hello guys,
I was going through auto root script today and found one error.
Code:
/sbin/busybox chmod [COLOR="Red"]4755[/COLOR] /system/xbin/su
Due to this incorrect permission which should be 6755, your su should not work.
Any confirmations?
Click to expand...
Click to collapse
Please remove autoroot for lite kernel and add smartassv2 for better battery life!!!!!
Disclaimer
Code:
/*
* You may void your warranty.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about this kernel.
* YOU are choosing to make these modifications to your device.
* I absolutely disclaim all the responsibilities.
[COLOR="Red"] * Flashing kernel requires unlocked bootloader.
[/COLOR] * You can unlock your bootloader from [URL="http://unlockbootloader.sonymobile.com/"][COLOR="Blue"][U]here[/U][/COLOR][/URL].
*/
Frankly, I don't like fancy or bloated OP's. So I kept thread simple and clean. Changelogs are not posted here. Check link in description.
All the best!
Click to expand...
Click to collapse
Features :-
Code:
* Based on Latest Official sources
* LINARO 4.7.3 Optimized
* Removed debugging s**ts
* Added Frandom
* O2 Optimizations
* Salvaged RAM
* Integrated CWM
* SmartOverclock upto 1.15 GHz
* CleanCache
* ZRAM/SWAP support
* init.d support
* Google Snappy Drivers
* Ext 2/3/4 Support
* Added CIFS, NTFS, NLS and FUSE
* Integrated WiFi modules
* adb server is persistent
* usb debugging enabled
* rootfs and /system mounted as rw
* Other tweaks and patches
* ro.secure=0 : Root exploit enabled via adb
* Governors : Smartass2
OndemandX
Performance
Ondemand
Interactive
Powersave
Conservative
MinMax
Hotplug
Pegasusq
Wheatley
OndemandQ
InteractiveX
* IO Shedulers : sio
deadline
noop
cfq
VR
row
zen
* [COLOR="Red"]See change log or commits for detailed info.[/COLOR]
[/B]
Code:
[COLOR="Purple"]Root Binary[/COLOR] : ( Flashable via recovery )
* SuperSU : [URL="http://download.chainfire.eu/204/SuperSU/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
* Superuser : [URL="http://androidsu.com/superuser/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
Code:
[COLOR="Purple"]Instructions[/COLOR] :
* Flash the boot partition with the kernel in fastboot mode.
* Guide : [URL="http://forum.xda-developers.com/showthread.php?t=1879982"][COLOR="Blue"][U]Here[/U][/COLOR][/URL]
Github : Source
Click to expand...
Click to collapse
F.A.Q's :-
1. Is this working on blah blah?
> I don't know. Do some research. Keep the disclaimer in mind.
2. OMG! My device rebooted/crashed/exploded?
> Get me the logcat. Check for any conflicting init.d scripts.
3. Battery drains like hell. WTF?
> Not kernel problem. It's your apps that are waking up device from deep sleep. Check the wakelocks. I don't build kernels to worsen battery life. See here for more info.
4. Signal is dropping since I flashed the kernel?
> Again. Not the kernel problem. Check if you have latest ( and proper ) baseband for your device.
5. Is it pre-rooted ?
> Autoroot isn't included. Just download flash-able zip from site. Users may prefer supersu/superuser.
6. App FC's or something crashes?
> Try reinstalling app again. Give me logcat if problem persists.
7. Does this kernel has X or Y mod?
> Do some research. Check thread, repo, commits etc.
8. Which governors/IO-schedulers to use?
> Depends on your usage. See here for more info.
9. I need more info on something?
> You can find all answers here
Changelog and Downloads
Code:
[CENTER]CODENAME OF XPERIA U: [COLOR="Red"]KUMQUAT[/COLOR][/CENTER]
Code:
[center]
[U][URL="http://www.mediafire.com/?r29d2lqkgut52"][COLOR="BROWN"]Download Kernel[/URL][/U][/COLOR][/center]
Code:
[CENTER][URL="https://github.com/rachit-rc96/Vengeance-Kernel-U8500/blob/master/Changelog.txt"][COLOR="RED"]Changelog[/URL][/COLOR][/U][/CENTER]
Thanks a lot!
Is this kernel for stock roms or for cm9?
Which cwm version?
Re: [KERNEL][ICS] Vengeance [1.21][25/02/13]
elia222 said:
Thanks a lot!
Is this kernel for stock roms or for cm9?
Which cwm version?
Click to expand...
Click to collapse
Kernel is for all stock ICS based Roms.
CWM 5.
1,3GHZ overclocking? It's real or it's only a number?
I knew that our u8500 can be clocked max to 1,2ghz, or no?
Re: [KERNEL][ICS] Vengeance [1.21][25/02/13]
ale467 said:
1,3GHZ overclocking? It's real or it's only a number?
I knew that our u8500 can be clocked max to 1,2ghz, or no?
Click to expand...
Click to collapse
He he. Don't use 1.3 GHz. It's untested.
BTW Qualcomm said MSM8255 can be max set to 1.4 GHz ( Arc S ). We all overclocked it to 1.8-1.9 GHz. Don't know about nova Thor though.
Rachit Rawat said:
He he. Don't use 1.3 GHz. It's untested.
BTW Qualcomm said MSM8255 can be max set to 1.4 GHz ( Arc S ). We all overclocked it to 1.8-1.9 GHz. Don't know about nova Thor though.
Click to expand...
Click to collapse
Caution with this.. NovaThor is a different chipset..
Re: [KERNEL][ICS] Vengeance [1.21][25/02/13]
ale467 said:
Caution with this.. NovaThor is a different chipset..
Click to expand...
Click to collapse
I know that. I built the kernel.
Edit : Any report? Booted or bootloop?
I want to try 1,3ghz clock speed, but I'm afraid that from my phone come out flames eheheh
Sorry if I have a bad english
Re: [KERNEL][ICS] Vengeance [1.21][25/02/13]
ale467 said:
I want to try 1,3ghz clock speed, but I'm afraid that from my phone come out flames eheheh
Sorry if I have a bad english
Click to expand...
Click to collapse
Then don't.
Anyways you got kernel booted?
For now, I've a GB based rom, so I can't try it..
The thing that attracts me most is the clock to 1.3 ghz...
Maybe I can try now making a backup, but GB CWM is really slow..
hi ! Give me 15 minutes and I'll try this kernel...stay tuned
UPDATE: bootloop. Installed on ICS stock rom based
Good Job
Hello Friend,
I have a 6.1.1.C.1.0 Based ROM. I installed the Kernel and here are my reports-
1. CWM Menu is a bit laggy
2. The phone vibrates like 2 sec after boot and again the LED Lights up and it vibrates again.
Please make it 1 vibration only
3. The phone boots succesfully :highfive:
4. Lagless
5. WiFi, Bluetooth, WiFi tethering and other functions work perfectly
6. Extra CPU Steppings present- 100 MHz, 1.1 GHz, 1.2 GHz, 1.3GHz
7. Phone manages to recognize new CPU Steppings and runs at them and phone likes jumping to 1.3 GHz
8. Current Config- OndemandX, CFQ, 100/800
GOOD Job! Thanks
PS- Does running at 100 MHz consume more battery than at 200 MHz? (Noob)
satya-1998 said:
Hello Friend,
I have a 6.1.1.C.1.0 Based ROM. I installed the Kernel and here are my reports-
1. CWM Menu is a bit laggy
2. The phone vibrates like 2 sec after boot and again the LED Lights up and it vibrates again.
Please make it 1 vibration only
3. The phone boots succesfully :highfive:
4. Lagless
5. WiFi, Bluetooth, WiFi tethering and other functions work perfectly
6. Extra CPU Steppings present- 100 MHz, 1.1 GHz, 1.2 GHz, 1.3GHz
7. Phone manages to recognize new CPU Steppings and runs at them and phone likes jumping to 1.3 GHz
8. Current Config- OndemandX, CFQ, 100/800
GOOD Job! Thanks
PS- Does running at 100 MHz consume more battery than at 200 MHz? (Noob)
Click to expand...
Click to collapse
Can you try 1,3ghz clock? Report please, I want to try it if the phone is more faster!
100MHz consume less battery than 200MHz :good:
satya-1998 said:
Hello Friend,
I have a 6.1.1.C.1.0 Based ROM. I installed the Kernel and here are my reports-
1. CWM Menu is a bit laggy
2. The phone vibrates like 2 sec after boot and again the LED Lights up and it vibrates again.
Please make it 1 vibration only
3. The phone boots succesfully :highfive:
4. Lagless
5. WiFi, Bluetooth, WiFi tethering and other functions work perfectly
6. Extra CPU Steppings present- 100 MHz, 1.1 GHz, 1.2 GHz, 1.3GHz
7. Phone manages to recognize new CPU Steppings and runs at them and phone likes jumping to 1.3 GHz
8. Current Config- OndemandX, CFQ, 100/800
GOOD Job! Thanks
PS- Does running at 100 MHz consume more battery than at 200 MHz? (Noob)
Click to expand...
Click to collapse
Good!
Can you, please, make some benchmark test (quadrant or antutu) just tu see if the new freq are working property?
Don't believe in Benchmarks
I got a Quadrant Score of 2779 at 1.3GHz OndemandX CFQ.
But hey, the phone is faster in terms of UI etc. when compared to Munjeni's Kernel at same speed of 800/200 OndemandX/OndemandAX CFQ.
This kernel's CWM is lacking though. Its fully functional but a bit laggy.
My recommendation is that do give a shot. It is absolutely stable, battery friendly and great. Just fix the CWM Lag.
GOOD Job Dev
satya-1998 said:
I got a Quadrant Score of 2779 at 1.3GHz OndemandX CFQ.
But hey, the phone is faster in terms of UI etc. when compared to Munjeni's Kernel at same speed of 800/200 OndemandX/OndemandAX CFQ.
This kernel's CWM is lacking though. Its fully functional but a bit laggy.
My recommendation is that do give a shot. It is absolutely stable, battery friendly and great. Just fix the CWM Lag.
GOOD Job Dev
Click to expand...
Click to collapse
2779 eh...
The same result as 1ghz clock speed
Re: [KERNEL][ICS] Vengeance [1.21][25/02/13]
ale467 said:
2779 eh...
The same result as 1ghz clock speed
Click to expand...
Click to collapse
You trust benchmarks , eh?
Anyways , thank you for reporting.
I misplaced code. Short vibration should be after entering recovery. Regarding, CWM, it's not an issue. I'll see it in next version.
Edit: For benchmarks, performance governor should be used. It'll give high numbers because CPU is always capped to its max frequency.
Of course, ondemandx is best for daily use.
Also I recommend using SIO.
Rachit Rawat said:
You trust benchmarks , eh?
Anyways , thank you for reporting.
I.misplaced code. Short vibration should be after entering recovery. Regarding, CWM, it's not an issue. I'll see it in next version.
Click to expand...
Click to collapse
Overclock is useless IMHO
Strange...I've Terra Rom based on stock c.1.10, and after flashed kernel by fastboot..I have bootloops, solution?
Disclaimer
Code:
#include
/*
* Your warranty is now void.
*
* The developers of Team-Blockbuster are not responsible for data loss,
* dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed., you accept this risk.
*/
Introduction
This kernel is for the htc one m7ul, m7att, m7vzw and m7tmo with a aosp 4.4.x based installed rom like cyanogenmod, aokp, miui and so on. But be sure your ROM is in sync with cm.
sourcecode? follow the link --> https://github.com/pinpong/android_kernel_htc_m7
Click to expand...
Click to collapse
Features
• build with latest linaro toolchain •
• linux backport & upstream patches •
• stripped modules •
• init.d support •
• any kernel updater •
• optimisation flags •
• noop/deadline/row/cfq/fiops/sio scheduler •
• uhid support •
• cifs support •
• ntfs r/w support •
• full otg support •
• force fastcharge •
• lz4 compression/decompression Extremely Fast Compression algorithm •
• kernel based thermal control •
• userspace voltage control •
• available cpu frequencies: 81MHz - 1998MHz •
• gpu overclocking •
Click to expand...
Click to collapse
Installation instructions
* Download latest thoravukk-kernel.zip
* Copy thoravukk-kernel.zip to your SDCard
* Boot into Recovery
* Flash thoravukk-kernel.zip
* Reboot and enjoy
Click to expand...
Click to collapse
Changelog
changelog
Click to expand...
Click to collapse
Downloads
Downloads
thoravukk-kernel
Sources
Github
Click to expand...
Click to collapse
FAQ
Q. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg and logcat.
Q. Do I need to wipe anything when flashing this kernel?
A: No.
Q: What is the best cpu/gpu oc/uv settings?
A: Use what you think is the best for you but think of your hardware.
Q. For wich Roms i can use this Kernel?
A: Raed the description.
Click to expand...
Click to collapse
Social network sites
Facebook
Google+
team-blockbuster.com
Click to expand...
Click to collapse
Thanks to
flar2
flyhalf205
faux123
fluxi
franciscofranco
DooMLoRD
tbalden
n3ocort3x
codeworkx
intervigil
crpalmer
h8rift
Click to expand...
Click to collapse
XDA:DevDB Information
[KERNEL][M7_UL, ATT, TMO, VZW][AOSP][Thoravukk] LZ4•CIFS•OC/UC/UV•THERMAL•LINARO, a Kernel for the HTC One
Contributors
pinpong
Kernel Special Features:
Version Information
Status: Stable
Created 2013-08-04
Last Updated 2013-12-02
Helpful links
FAQ:
Q. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg and logcat.
Q. Do I need to wipe anything when flashing this kernel?
A: No.
Q: What is the best cpu/gpu oc/uv settings?
A: Use what you think is the best for you.
Q: You have huge battery drain?
A: It will improve after some time.
Q. For wich Roms i can use this Kernel?
A: Raed the description.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
........................
Helpfull links
[REF][TWEAKS] Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs
[GUIDE][ADB]Easiest How to use adb, logcat, etc for noobs and newbies
[GUIDE] ADB Workshop and Guide for everyone
Click to expand...
Click to collapse
Click to expand...
Click to collapse
.....
Thanks
you don't like oc or is it in coming?
For what? You have a quadcore device running at 1.7GHz.
Sent from my One using xda premium
4x 2.0 seems to work better for me.
Sure but for what exactly you need it?
I have a OC patch too and i have try it.
With it i cant feel different.
Sent from my One using xda premium
can you mail me the patch or is it in a different kernel?
Revert
Sent from my One using xda premium
your kernel is very good but without oc i have little stucks on launcher
????
Works very smooth for me.
I dont think it have to do with no overclocking.
Sent from my One using xda premium
altensalz said:
your kernel is very good but without oc i have little stucks on launcher
Click to expand...
Click to collapse
Certainly nothing to do with overclocking
Come on, dude. It's already more powerful than you need in the real-life apps.
about this OC discussion... no launcher in the world needs 4x 2GHz to run smooth (as no app needs it). Its hotplugging what causes this stutters because mpdecison is simply adjusted that way, to run with less cores as possible.....
try it out... switch off mpdecision.. but u will notice that the cores arent unplugged as they should and tada... the ui is buttery smooth even with a hardcore live wallpaper... even on 702MHZ max... why ? simple.. because the cores arent offline. bad thing on this... deepsleep is then half of the time used as it would use it with mpdecision on.
What this phone needs is a properly handling of hotplugging... nothing else... (if u ask me, 1,7 GHZ are way to much) I run the phone the whole time on 1350MHZ max and everything is smooth with interactive governor as PowerHAL kicks in with this governor....
@pinpong
i was busy with school last 2 weeks but havent forgot about the thing u sent me.. will report asap
dont think anyone needs more than 1.7 Ghz really. its just for stats and benchmarks.
flashing now!
Keep those updates coming!!
cifs modules?
i can't seem to find the cifs modules. flashed your kernel primarily because of cifs support
I know. This should fix in v1.08.
Sent from my One using xda premium
new version for latest cm builds with cifs as module.
altensalz said:
your kernel is very good but without oc i have little stucks on launcher
Click to expand...
Click to collapse
ill second this notion. In a perfect world, 1.7 is plenty of processor for the launcher but with the current state of CM 10.1, the 2g OC really helps smooth out the micro stutters in the launcher. Everything else on the phone is smooth and snappy but the launcher lags a bit on the stock CM kernel for me.
Disclaimer:
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
I made that kernel for myself,but decided to share it:maybe someone finds it useful.
Short list of features(not full,I could forgot something):
Latest source code
Patched to version 3.0.101(credits to munjeni)
Compiled with GCC 4.8.2 toolchain(self builded)
Various optimisation flags(-mtune=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard)
Huge amount of CFS patches(improved load balancing)
Memory unaligned access
ARM RWSEM optimized algorithm
Asynchronous I/O disk usage algorithm
Auto-Root
CWM Touch Recovery
Init.d support
BusyBox
ZRAM(with LZ4 compression)/ZCACHE/UKSM/CleanCache
SLUB memory allocator
Overclockable to 1.2 GHz(stable only with performance governor(for now))
Dynamic FSync Control
Exclusive Bionic libc(improved memory acces efficiency)
Adaptive readahead
RCU boost enabled
Power Saving tuned
...list will be updated,when i remember more added features
Changelog
5.3->5.5
Stabilized overclock @1.2GHz(but be aware-phone is heating very much now(in OC mode))
Dynamic & async fsync(faux123)
RWsem & mutex patches
Several changes for ext4 and mmc subsystem
Added parameter extra_free_kbytes(by default 4096)
Switched to GCC 4.9.0
Frequencies by default:200MHz-1,2GHz
About overclock: For now overclocked frequency stable only with performance governor,in other cases reboots are possible(This information actual till version 5.5). This overclock-real, not just digits in "current frequency" field. Original overclock technology made by cocafe,I am just ported his LiveOPP to our device(only core functionality).
Also, exclusive libc integrated into kernel(I was compiled it from sources and changed string routines to more optimized for armv7).
I want to say thanks to all people with public github repos:there are very little amount of my code in that kernel,most of patches I was picked up from public sources.
Download v5.3:http://d-h.st/fFg
Download v5.5:http://d-h.st/mdr
XDA:DevDB Information
Owl, Kernel for the Sony Xperia Sola
Contributors
B.B.N.
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 5.5
Created 2014-06-02
Last Updated 2014-07-06
The WiFi kernel module should remain as kernel-separate module?
I am noticed a little bug:
- WiFi is activated with random MAC addresses. I have set up MAC filtering on my router, and when trying to connect, my router kicks me
Optimizing libc is a good idea. Works great!
CM Version or Stock Version ?????
v5.5 please..
I can't download it from 4pda.ru:laugh:
maverickperfect said:
I am noticed a little bug:
- WiFi is activated with random MAC addresses.
Click to expand...
Click to collapse
I shall look for solution,thanks for bug report. But I am can't develop too often, When I have time i will continue.
does anyone have this kernel ?
maverickperfect said:
I am noticed a little bug:
- WiFi is activated with random MAC addresses. I have set up MAC filtering on my router, and when trying to connect, my router kicks me
Optimizing libc is a good idea. Works great!
Click to expand...
Click to collapse
I remember this issue with MAC in ICS. Maybe it is the same?
Have a look here:
http://forum.xda-developers.com/xpe...ria-sola-ics-rom-6-1-1-b-1-10-t1922029/page47
akkufix said:
I remember this issue with MAC in ICS. Maybe it is the same?
Have a look here:
http://forum.xda-developers.com/xpe...ria-sola-ics-rom-6-1-1-b-1-10-t1922029/page47
Click to expand...
Click to collapse
hey can u share the link for this kernel
ak.akshay said:
hey can u share the link for this kernel
Click to expand...
Click to collapse
I'm a long time away from Sola, but you should have a look here.
You have to register there. For browser use Chrome to translate
Info and thread:
http://4pda.ru/forum/index.php?act=search&source=all&forums[]=all&query=Owl+Kernel+&x=23&y=11
Well, for you i hosted them. If anyone have concerns, i will remove them.
V5.5
Owl_CWM_5.5(3.0.101).zip - 8.18 MB
V5.7
Owl_CWM_5.7_partially_replicated.zip - 8.54 MB
All credits to the OP @B.B.N. :good:
akkufix said:
I'm a long time away from Sola, but you should have a look here.
You have to register there. For browser use Chrome to translate
Info and thread:
http://4pda.ru/forum/index.php?act=search&source=all&forums[]=all&query=Owl+Kernel+&x=23&y=11
Well, for you i hosted them. If anyone have concerns, i will remove them.
V5.5
Owl_CWM_5.5(3.0.101).zip - 8.18 MB
V5.7
Owl_CWM_5.7_partially_replicated.zip - 8.54 MB
All credits to the OP @B.B.N. :good:
Click to expand...
Click to collapse
thanx I tried ON That Site But FIles Were Deleted
ak.akshay said:
thanx I tried ON That Site But FIles Were Deleted
Click to expand...
Click to collapse
You have to be registered to see them files on 4pda.
akkufix said:
You have to be registered to see them files on 4pda.
Click to expand...
Click to collapse
tried the kernel antutu gave me 17000+ score but kernel is laggy
ak.akshay said:
tried the kernel antutu gave me 17000+ score but kernel is laggy
Click to expand...
Click to collapse
17000+ for Sola, but laggy?
Can't say anything about this Kernel, maybe this comes from device's less RAM and/or LMK is to aggressive?
So everything must be reloaded before running? Try to make LowMemoryKiller "softer".
Play with governors - check with i.e. NoFrills.
akkufix said:
17000+ for Sola, but laggy?
Can't say anything about this Kernel, maybe this comes from device's less RAM and/or LMK is to aggressive?
So everything must be reloaded before running? Try to make LowMemoryKiller "softer".
Play with governors - check with i.e. NoFrills.
Click to expand...
Click to collapse
look Here 17905
ak.akshay said:
look Here 17905
Click to expand...
Click to collapse
Well...we were all happy at the time, as we reached the 10K with P, Go and Sola.
We started with 6K
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WON'T WORK ON STOCK BASED ROM
Introduction:
The main objective of the kernel is to give to any user, a stock kernel with some tweaks like new CPU govenor focused on battery, performance and both of them, I/O scheduler, ...
Click to expand...
Click to collapse
Features:
Updated to lastest Motorola source
Kernel upstreamed to lastest source (3.18.63)
Lionfish, Bioshock, Zzmoove, PegasusQ CPU governors
FIOPS, ZEN I/O scheduler
Fingerprint boost driver
CRC check disabled (Performance boosted)
Vibration control
Sound control
Fsync support
Safetynet patch
Makefile: -0fast and Graphite optimizations
All feature of the boulzordev's kernel
Many other tweaks (check gitlab)
Click to expand...
Click to collapse
Download
Androidfilehost: https://www.androidfilehost.com/?w=files&flid=198747
Click to expand...
Click to collapse
How to flash:
1. Download Alize for Potter
2. Reboot to recovery
3. Flash kernel's zip
4. Reboot and tweak with proper app (Kernel auditor, Ex kernel manager, ...)
Click to expand...
Click to collapse
XDA:DevDB Information
Alize, Kernel for the Moto G5 Plus
Contributors
Martichou, Boulzordev, Flar2, Vache, fAiyaz, Nick
Source Code: https://gitlab.com/alize_kernel/Potter
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.0.7
Created 2017-07-20
Last Updated 2017-07-20
Changelog:
Code:
v2.0
- Everything has been redone from scratch
- Switch to Gitlab and setting up CI
- Remove Barry-Allen (too old)
- Added ZEN I/O governor
- Upstream to 3.18.63
- Check Gitlab for more
v1.8
- PegasusQ cpu governor
- Kcal control
- Hight priority workqueue
- Some build fix
v1.7 | Public release
- Lastest source
- Barry-Allen, Lionfish, ... cpu governor
- FIOPS I/O scheduler
- CRC check disabled
- Spectrum support
- Many more on github
Good work! I'm liking the extra gov options. Performance is great with the default profile at the moment. I believe it's barryallen.
dpryor88 said:
Good work! I'm liking the extra gov options. Performance is great with the default profile at the moment. I believe it's barryallen.
Click to expand...
Click to collapse
Yes, default CPU governor is set to Barry-Allen.
Glad you like the kernel.
New build is up!
Check changelog.
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
joshk89 said:
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
Click to expand...
Click to collapse
My fingerprint works perfectly, not a kernel issue
GtrCraft said:
My fingerprint works perfectly, not a kernel issue
Click to expand...
Click to collapse
Yeah I don't know what happened but nothing could undo the issue other than a clean install. Which sucks lol cause I have to redo everything and my backup is useless
joshk89 said:
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
Click to expand...
Click to collapse
I'm sorry for this.
But it's not a kernel issue.
No one have this issue. Good luck to restore your data
I've been running 1.7 / 1.8 for a few days now using Lionfish governor and i have to say it's pretty awesome. :good:
New build is up!
Check changelog.
Martichou said:
New build is up!
Check changelog.
Click to expand...
Click to collapse
Hey bro there's some interesting features on this kernel. Figured I'd share the link with you https://forum.xda-developers.com/oneplus-5/development/render-kernel-oos-n-eas-r1-t3639839
the download link for this kernel is down. can someone provide a mirror, please?
I don't see any extra cpu governors.
What should i do??
Akshatk said:
I don't see any extra cpu governors.
What should i do??
Click to expand...
Click to collapse
Use the v44 at this thrend:
https://forum.xda-developers.com/showthread.php?p=74525704
matze779 said:
Use the v44 at this thrend:
https://forum.xda-developers.com/showthread.php?p=74525704
Click to expand...
Click to collapse
Not there.
Here is a mirrorlink:
https://www.dropbox.com/sh/xr3qe15mjqee6ps/AACOfo2SLn30rYllGC8krvx-a?dl=0
Closed per OP request