Hello
At First I want to say Sorry For my poor English.
ok , I've Bricked my Xperia Neo V After flashed the Zelly Cream Rom V2 by GaGan, so at first my Phone was bootlopping (Sony logo , than bootscreen, then SOny logo again ) and now it stuck at Sony logo and can't let me Enter CWM or even Turn OFF this H%#&@(#. so sudenly the Sony logo disapper and the screen turns black . and when i press the Turn On button the led light flashes Red like i've got no battery , but when i try to charge my phone no battery charging info appears
I've tried FlashTool But when it says that i've to connet my phone holding the back button , nothing happens , sometimes after connected for some seconds the green light flashes and the sony logo appears but after some minutes all go down .
so here comes the FLASHTOOL LOG.!:
27/003/2013 08:03:26 - INFO - <- This level is successfully initialized
27/003/2013 08:03:26 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/003/2013 08:03:26 - INFO - You can drag and drop ftf files here to start flashing them
27/003/2013 08:03:35 - INFO - Device disconnected
27/003/2013 08:03:56 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/003/2013 08:03:56 - INFO - Preparing files for flashing
27/004/2013 08:04:42 - INFO - Please connect your device into flashmode.
27/006/2013 08:06:51 - INFO - Device connected in flash mode
27/006/2013 08:06:52 - INFO - Opening device for R/W
27/006/2013 08:06:54 - INFO - Start Flashing
27/006/2013 08:06:54 - INFO - Processing loader
27/006/2013 08:06:54 - INFO - Checking header
27/006/2013 08:06:54 - INFO - Ending flash session
27/006/2013 08:06:54 - ERROR -
27/006/2013 08:06:54 - ERROR - Error flashing. Aborted
27/006/2013 08:06:56 - INFO - Device connected in flash mode
27/007/2013 08:07:14 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/007/2013 08:07:14 - INFO - Preparing files for flashing
27/007/2013 08:07:37 - INFO - Device disconnected
Please someone Help Me !!!!
Re: [Q] Bricked Neo V , can't enter flash mode
You need to charge the device from wall charger,not from your PC..
Anyway,charge it first...
Sent from my Xperia Neo V
megatpanji said:
You need to charge the device from wall charger,not from your PC..
Anyway,charge it first...
Sent from my Xperia Neo V
Click to expand...
Click to collapse
i've tried all night , when i connected my charger to the phone there's no sign of battery chargin.
i'll try again and see what's happen^^
megatpanji said:
You need to charge the device from wall charger,not from your PC..
Anyway,charge it first...
Sent from my Xperia Neo V
Click to expand...
Click to collapse
Man now the Led turn Blue but when i try to flash this happen:
27/023/2013 09:23:15 - INFO - <- This level is successfully initialized
27/023/2013 09:23:15 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/023/2013 09:23:15 - INFO - You can drag and drop ftf files here to start flashing them
27/023/2013 09:23:21 - INFO - Device connected in flash mode
27/023/2013 09:23:22 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/023/2013 09:23:22 - INFO - Preparing files for flashing
27/023/2013 09:23:28 - INFO - Device disconnected
27/024/2013 09:24:05 - INFO - Please connect your device into flashmode.
27/024/2013 09:24:22 - ERROR - Drivers need to be installed for connected device.
27/024/2013 09:24:22 - ERROR - You can find them in the drivers folder of Flashtool.
27/024/2013 09:24:23 - INFO - Flash canceled
lexrios said:
Man now the Led turn Blue but when i try to flash this happen:
27/023/2013 09:23:15 - INFO - <- This level is successfully initialized
27/023/2013 09:23:15 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/023/2013 09:23:15 - INFO - You can drag and drop ftf files here to start flashing them
27/023/2013 09:23:21 - INFO - Device connected in flash mode
27/023/2013 09:23:22 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/023/2013 09:23:22 - INFO - Preparing files for flashing
27/023/2013 09:23:28 - INFO - Device disconnected
27/024/2013 09:24:05 - INFO - Please connect your device into flashmode.
27/024/2013 09:24:22 - ERROR - Drivers need to be installed for connected device.
27/024/2013 09:24:22 - ERROR - You can find them in the drivers folder of Flashtool.
27/024/2013 09:24:23 - INFO - Flash canceled
Click to expand...
Click to collapse
WTF man ? It clearly stated that you need proper driver which can just found in your flashtool dir ( C:flashtool/driver) and install it ! Just tick your neo V
Saingpor said:
WTF man ? It clearly stated that you need proper driver which can just found in your flashtool dir ( C:flashtool/driver) and install it ! Just tick your neo V
Click to expand...
Click to collapse
MAn i've installed the drives for Neo, arc and etc , cos' in Flash Tools There's no Drive for Neo V . but still got the same message,
i've installed all the drives on the Pack to see whats happen and the same error Ocur .
lexrios said:
MAn i've installed the drives for Neo, arc and etc , cos' in Flash Tools There's no Drive for Neo V . but still got the same message,
i've installed all the drives on the Pack to see whats happen and the same error Ocur .
Click to expand...
Click to collapse
Have you tried this :angel:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Plz just remove/uninstall your flashtool and also all the drivers you install and restart ur pc !
Now install flashtool and the above mentioned drivers
And then your neo V will not flashable Just kidding man ! Plz don't hate me
Saingpor said:
Have you tried this :angel:
Plz just remove/uninstall your flashtool and also all the drivers you install and restart ur pc !
Now install flashtool and the above mentioned drivers
And then your neo V will not flashable Just kidding man ! Plz don't hate me
Click to expand...
Click to collapse
sadly it does'nt work ... i've uninstalled the flashtools , rebooted the PC , then reinstalled FlashTool , ticked the Flash mode , and Fast boot mode drives but
and when asked i've hold the Menu key and plugged the phone , the led turns blu but the same message appears:
27/004/2013 10:04:47 - INFO - <- This level is successfully initialized
27/004/2013 10:04:47 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/004/2013 10:04:47 - INFO - You can drag and drop ftf files here to start flashing them
27/004/2013 10:04:56 - INFO - Device disconnected
27/005/2013 10:05:34 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/005/2013 10:05:34 - INFO - Preparing files for flashing
27/007/2013 10:07:35 - INFO - Please connect your device into flashmode.
27/007/2013 10:07:49 - ERROR - Drivers need to be installed for connected device.
27/007/2013 10:07:49 - ERROR - You can find them in the drivers folder of Flashtool.
27/008/2013 10:08:00 - INFO - Flash canceled
EDIT: I Found the error , I'm holding menu button , I"ve to hold de Back button ¬¬
You must hold the BACK button not the menu button!!!
lexrios said:
sadly it does'nt work ... i've uninstalled the flashtools , rebooted the PC , then reinstalled FlashTool , ticked the Flash mode , and Fast boot mode drives but
and when asked i've hold the Menu key and plugged the phone , the led turns blu but the same message appears:
27/004/2013 10:04:47 - INFO - <- This level is successfully initialized
27/004/2013 10:04:47 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/004/2013 10:04:47 - INFO - You can drag and drop ftf files here to start flashing them
27/004/2013 10:04:56 - INFO - Device disconnected
27/005/2013 10:05:34 - INFO - Selected MT11i_4.1.B.0.587_Customized_NCB_Nordic.ftf
27/005/2013 10:05:34 - INFO - Preparing files for flashing
27/007/2013 10:07:35 - INFO - Please connect your device into flashmode.
27/007/2013 10:07:49 - ERROR - Drivers need to be installed for connected device.
27/007/2013 10:07:49 - ERROR - You can find them in the drivers folder of Flashtool.
27/008/2013 10:08:00 - INFO - Flash canceled
EDIT: I Found the error , I'm holding menu button , I"ve to hold de Back button ¬¬
Click to expand...
Click to collapse
Myke72 said:
You must hold the BACK button not the menu button!!!
Click to expand...
Click to collapse
Do what as Myke told you ! You must hold back button in order to get into flashmode while connect with PC !
The blue led mean Bootloader/fastboot mode
Oh god .......
Man Saingpor !!! You saved My Life !!!!! THANKS THANKS THANKS AND THANKS AGAIN!!!!
lexrios said:
Man Saingpor !!! You saved My Life !!!!! THANKS THANKS THANKS AND THANKS AGAIN!!!!
Click to expand...
Click to collapse
So now plz edit your thread as [SOLVED] ! So other peep will know your problem is solved
Another thank would be aprreciated lol :highfive::laugh::angel::fingers-crossed:
Related
[Guide][28-01-12]Xtra Noob guide to help you to get 62 rooted for Neo & V Locked Bl
Alright this is a guide for those that have firmware 62 that can not be rooted,
if you have updated with official SE programs,
i help you people to get 62 rooted !!
This is working for both, Neo And Neo V
and this is with kernel and Firmware !!
Important !!! >> OTA << is over the AIR and NOT with Pc Companion !!!
I Hope That You Peeps Understand This NOW !!
I Dont Tell It 10,000 TIMES !!
* OTA is with the phone itself so no cables, pc etc. NEEDED !! *
For OTA do this:
* Go to Settings
* Go to about phone
* Go to software update
* 1st Install Flashtool. File here:
http://androxyde.github.com/Flashtool/
* If the new flashtool dont work for you, choose the older version of it !!
* Get the tft file here and choose for flashable 42
This is for Neo:
http://forum.xda-developers.com/showthread.php?t=1258723
This is for Neo V:
http://forum.xda-developers.com/showpost.php?p=19808360&postcount=3
* Then open de winzip file with win.rar or another program
and put the tft file into firmwares folder in the flashtool menu
(go to your computer then C driver and open flashtool en there you will see
firmwares folder so put the tft file there)
* Open flashtool(double click on the icon or shortcut you have make on you desktop
or go to your C driver and go to flashtool)
* Flashmode:
* Connect your device in flashmode,
* That is pressing the back button on you phone when it`s off
* Connect you usb cable
* wait till flashtool is done( phone reboots automatic)
* flash the file 42 with flashtool,
tick only wiping data & cache.
* turn you phone on
* set usb debugging on
* then go to flashool, advance, root and then
go to zergRush Exploit
* If the Root from flashtool dont work for you,
Use this from DooMlord:
http://forum.xda-developers.com/showthread.php?t=1320350
* your phone is rooted now and then do the OTA
to get firmware 62 and you done !!
* Last one to install CWM,
* Get the file here:
http://www.mediafire.com/?73xv18tht0e8zt4
these are the steps:
increase your screen timeout to 10 min !!
1. Extract the above files
2. Browse to the Folder
3.Enable USB Debugging on device
4.Connect your device using usb data cable
5. Run " install-cwm1.cmd" for Neo V
6.Follow on screen instruction
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Thanks to:
Gregbradley > Learned A Ton From Him, My Good Best Friend !!
Mazzit > To get rooted 62
eqlove196426597 > Neo ftf files
vimjam > Neo V ftf files
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Proof is here on my Neo V
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can I install cwm after using superoneclick
(superoneclick used the zergRUSH exploit)
And if yes, when installing clockwork mod recovery, do i have to keep the sd card mounted or unmount it?
But if we flash ONLY .42 kernel (kernel.sin) will it works?
Because kernel is 6Mb file only and all process is way faster. ??
Thanx
Sent from my HTC Desire using Tapatalk
28/034/2012 22:34:55 - INFO - Device connected in flash mode
28/035/2012 22:35:37 - INFO - Device disconnected
28/037/2012 22:37:42 - INFO - Selected Ne0V_4.0.2.A.0.42.ftf
28/037/2012 22:37:42 - INFO - Preparing files for flashing
28/037/2012 22:37:49 - INFO - Device connected in flash mode
28/038/2012 22:38:04 - INFO - Please connect your device into flashmode.
28/038/2012 22:38:04 - INFO - Opening device for R/W
28/038/2012 22:38:04 - INFO - Reading device information
28/038/2012 22:38:04 - INFO - Phone reading for flashing.
28/038/2012 22:38:05 - INFO - Start Flashing
28/038/2012 22:38:05 - INFO - Flashing loader
28/038/2012 22:38:07 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
28/038/2012 22:38:07 - INFO - Flashing adsp.sin
28/038/2012 22:38:10 - INFO - Flashing amss_fs.sin
28/038/2012 22:38:11 - INFO - Flashing fota1.sin
28/038/2012 22:38:12 - INFO - Flashing fota0.sin
28/038/2012 22:38:13 - INFO - Flashing apps_log.sin
28/038/2012 22:38:13 - INFO - Flashing amss.sin
28/038/2012 22:38:23 - INFO - Flashing system.sin
28/039/2012 22:39:05 - ERROR - Read error :31 : Urządzenie dołączone do komputera nie działa.
28/039/2012 22:39:05 - ERROR - Error flashing. Aborted
28/039/2012 22:39:06 - INFO - Device connected in flash mode
Adn what now?? Phone when start.... stop on SE screen and reboot
Kuter_tm said:
28/034/2012 22:34:55 - INFO - Device connected in flash mode
28/035/2012 22:35:37 - INFO - Device disconnected
28/037/2012 22:37:42 - INFO - Selected Ne0V_4.0.2.A.0.42.ftf
28/037/2012 22:37:42 - INFO - Preparing files for flashing
28/037/2012 22:37:49 - INFO - Device connected in flash mode
28/038/2012 22:38:04 - INFO - Please connect your device into flashmode.
28/038/2012 22:38:04 - INFO - Opening device for R/W
28/038/2012 22:38:04 - INFO - Reading device information
28/038/2012 22:38:04 - INFO - Phone reading for flashing.
28/038/2012 22:38:05 - INFO - Start Flashing
28/038/2012 22:38:05 - INFO - Flashing loader
28/038/2012 22:38:07 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
28/038/2012 22:38:07 - INFO - Flashing adsp.sin
28/038/2012 22:38:10 - INFO - Flashing amss_fs.sin
28/038/2012 22:38:11 - INFO - Flashing fota1.sin
28/038/2012 22:38:12 - INFO - Flashing fota0.sin
28/038/2012 22:38:13 - INFO - Flashing apps_log.sin
28/038/2012 22:38:13 - INFO - Flashing amss.sin
28/038/2012 22:38:23 - INFO - Flashing system.sin
28/039/2012 22:39:05 - ERROR - Read error :31 : Urządzenie dołączone do komputera nie działa.
28/039/2012 22:39:05 - ERROR - Error flashing. Aborted
28/039/2012 22:39:06 - INFO - Device connected in flash mode
Adn what now?? Phone when start.... stop on SE screen and reboot
Click to expand...
Click to collapse
Try again....
;/ i change USB and i think its work becouse
28/000/2012 23:00:10 - INFO - Selected Ne0V_4.0.2.A.0.42.ftf
28/000/2012 23:00:10 - INFO - Preparing files for flashing
28/000/2012 23:00:12 - INFO - Please connect your device into flashmode.
28/000/2012 23:00:28 - INFO - Device connected in flash mode
28/000/2012 23:00:28 - INFO - Opening device for R/W
28/000/2012 23:00:29 - INFO - Reading device information
28/000/2012 23:00:29 - INFO - Phone reading for flashing.
28/000/2012 23:00:29 - INFO - Start Flashing
28/000/2012 23:00:29 - INFO - Flashing loader
28/000/2012 23:00:31 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
28/000/2012 23:00:31 - INFO - Flashing adsp.sin
28/000/2012 23:00:34 - INFO - Flashing amss_fs.sin
28/000/2012 23:00:35 - INFO - Flashing fota1.sin
28/000/2012 23:00:36 - INFO - Flashing fota0.sin
28/000/2012 23:00:37 - INFO - Flashing apps_log.sin
28/000/2012 23:00:37 - INFO - Flashing amss.sin
28/000/2012 23:00:47 - INFO - Flashing system.sin
28/003/2012 23:03:12 - INFO - Flashing finished.
28/003/2012 23:03:12 - INFO - Please wait. Phone will reboot
28/003/2012 23:03:12 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
28/003/2012 23:03:13 - INFO - Device connected in flash mode
28/003/2012 23:03:14 - INFO - Device disconnected
28/003/2012 23:03:15 - INFO - Device connected in flash mode
I unplug phone power on i see sony ericsson and reboot again Sony Ericsson and reboot..... all the time WTF?
I think i see problem.... i have NEO (just) MT15i and soft is for Neo V its can be it?
As there is already a similar guide in Dev section I've moved this guide to general section where new members have no restriction of 10 posts. Thanks Pandemic for all the help! Best regards,
Kuter_tm said:
;/ i change USB and i think its work becouse
28/000/2012 23:00:10 - INFO - Selected Ne0V_4.0.2.A.0.42.ftf
28/000/2012 23:00:10 - INFO - Preparing files for flashing
28/000/2012 23:00:12 - INFO - Please connect your device into flashmode.
28/000/2012 23:00:28 - INFO - Device connected in flash mode
28/000/2012 23:00:28 - INFO - Opening device for R/W
28/000/2012 23:00:29 - INFO - Reading device information
28/000/2012 23:00:29 - INFO - Phone reading for flashing.
28/000/2012 23:00:29 - INFO - Start Flashing
28/000/2012 23:00:29 - INFO - Flashing loader
28/000/2012 23:00:31 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
28/000/2012 23:00:31 - INFO - Flashing adsp.sin
28/000/2012 23:00:34 - INFO - Flashing amss_fs.sin
28/000/2012 23:00:35 - INFO - Flashing fota1.sin
28/000/2012 23:00:36 - INFO - Flashing fota0.sin
28/000/2012 23:00:37 - INFO - Flashing apps_log.sin
28/000/2012 23:00:37 - INFO - Flashing amss.sin
28/000/2012 23:00:47 - INFO - Flashing system.sin
28/003/2012 23:03:12 - INFO - Flashing finished.
28/003/2012 23:03:12 - INFO - Please wait. Phone will reboot
28/003/2012 23:03:12 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
28/003/2012 23:03:13 - INFO - Device connected in flash mode
28/003/2012 23:03:14 - INFO - Device disconnected
28/003/2012 23:03:15 - INFO - Device connected in flash mode
I unplug phone power on i see sony ericsson and reboot again Sony Ericsson and reboot..... all the time WTF?
I think i see problem.... i have NEO (just) MT15i and soft is for Neo V its can be it?
Click to expand...
Click to collapse
Yeah thats possible, its for neo v !!
To others why you say that neo is better, and why is it crash all the time if you try this if it is for neo v.
These are the right steps, so more simpler then this i cant make, i do these steps and get never an error, some doing some wrong things
Ok i instal this M15 3.0.A.2.181 and phon is again onlinei try from this ver of FW root and instal 2.3.4 but i have maybe stupid question.... i have clean soft before when i want to instal somthink i enter xplore and find *.app to instal now i havent any file menager.... there is enny way to put somewhere app file to phon will see it without instalin file explorer....
Kuter_tm said:
Ok i instal this M15 3.0.A.2.181 and phon is again onlinei try from this ver of FW root and instal 2.3.4 but i have maybe stupid question.... i have clean soft before when i want to instal somthink i enter xplore and find *.app to instal now i havent any file menager.... there is enny way to put somewhere app file to phon will see it without instalin file explorer....
Click to expand...
Click to collapse
Huh? I cant ubderstand you? Which file xplorer do you need, on your phone or pc?
Sent from my MT11i using XDA Premium App
hehe i think that u dont understand me.... hmmm
where on SD card i can place app file and be able to install it... i have clear soft and i havent any file explorer from market etc
Kuter_tm said:
hehe i think that u dont understand me.... hmmm
where on SD card i can place app file and be able to install it... i have clear soft and i havent any file explorer from market etc
Click to expand...
Click to collapse
You need file explorer anyway for explore this app in sdcard...
And no matter where you put this file...without any file explorer you cant install it.
Kuter_tm said:
hehe i think that u dont understand me.... hmmm
where on SD card i can place app file and be able to install it... i have clear soft and i havent any file explorer from market etc
Click to expand...
Click to collapse
Put your sd in your phone, get connect with your pgone with the pc put the file in a new map with name what you want and put it there and enter cwm and flash the zipfile where you putting it in the map, just follow the steps And are you rooted ane have cwm?
Im going to sleep now, good night everyone !!
Again fail.....
I try to rot by this method http://forum.xda-developers.com/showthread.php?t=1133339
and i try fix batery 0%... and nothink i flash again and batery still 0%
Thanks for this, but is there a way to do this by unlocking the bootloader?
I have already tried unlocking the bootloader physically using the test point, but it didn't work - still says the BL is locked.
I have tried your way, and it works! But I want to install a custom ROM on my Xperia Neo, and every time I install a custom ROM using the CW-Install, it gets hung during boot up.
I should never have switched from HTC...
i start fight again... all night i charge phone and batery is still dead.... now im try to unroot by superoneclick and reflash soft using .042 now phone is booting....
and my baterry is still 0% any ideal why and how i can fix it ? hmmm i try install .062 maybe it help me i havent more ideas
Kuter_tm said:
i start fight again... all night i charge phone and batery is still dead.... now im try to unroot by superoneclick and reflash soft using .042 now phone is booting....
and my baterry is still 0% any ideal why and how i can fix it ? hmmm i try install .062 maybe it help me i havent more ideas
Click to expand...
Click to collapse
Which phone do you have main, this is for neo v, its so simple just follow the steps correctly and its done, not so hard to understand. Damn!
I have NEO and just NEo mt15i and im FIX it phone havent 0% of battery i use this GUIDE
http://forum.xda-developers.com/showthread.php?t=1312398
and work fine for me EXACLY this part
1. Read the full post, especially the FAQ. In case of doubt, you can use this guide to know how to do things:
http://forum.xda-developers.com/show....php?t=1133650
2. Unlock booloader
http://forum.xda-developers.com/show....php?t=1034087
3. Grab the most recent kernel patch from this thread. The file is boot.img.xxx.7z for your phone (ARC / NEO). We call this the kernel patch, or only the patch.
4. You must be same firmware and patch version, so if you aren't firmware xxx, use flashtools to flash the correct firmware. and wipe the data if downgrading firmware version. You can find some recent stock firmwares in the [Firmwares (.FTF)] section.
http://forum.xda-developers.com/show....php?t=1304634
5. Use fastboot to flash boot.img contained in file boot.img.xxx.arc.7z (or boot.img.xxx.neo.7z for NEO users). Flash the .img file, not the .7z file .
http://forum.xda-developers.com/show....php?t=1116970
6. Now you have a phone showing allways 85% battery capacity
7. Install most recent FuelGaugeFixV??.apk from this thread (Bazoocaze version).
8. For the first time, make sure the charger is plugged, and select "Start full charge" from the apk fix menu (use the menu button to show options). A full charge takes 3h00 ~ 3h40.
9. Now you have a fully charged phone, and apk fix updates battery % acordingly to phone usage.
10. See "Kernel issues" and "APK issues".
11. Press the tanks button on this thread, and optionally feel free to buy me some gift/beer/pizza/coffe.
http://forum.xda-developers.com/dona....php?u=4215483
12. Finish
From end of post im download boot.img.4.0.2.A.0.42.neo.7z cos i have soft 0.42 instal it by fast boot and work for me then install charger monitor and for now phone is charging to full
How to fix a Hardbricked RAY
I bricked my Ray last night when I try to relock.after flashing It stucked flash mode.I could nt use flash tool any more!Also fastboot mode wasnt working.When I try to PC companion it was nt starting directly from flash mode.Then an old version updater bringed back my phone!You can even fix if xRecovery doesn't work!
RAY or other xperias WITHOUT using PC Companion or Flashtool.
Do it step by step;
-First uninstall all sony pc companion components.All sony drivers.
-Then download SEUS from this link.http://db.tt/jpD87GkM
-Install and run.After updating the program close.
-Then download pda.net drivers from here:http://junefabrics.com/android/download.php and install.
-Download and install latest flashtool from the topic.
-After all of these you must relock ray because you need to SEUS to unbrick your phone and it requres locked bootloader.
-Download this ftf file and flash this file via flash tool.http://www.mediafire.com/?g1b5j712ajx4yjd .(Your device must be seen after installing pda.net drivers in green flash mode)So your phone is have locked bootloader.
-So every think is ready.Open SEUS than select your ray that is it.For this step:http://forum.xda-developers.com/showthread.php?t=1492805
-You can unlock your phone again if you want than
I hope this helped, and if it worked for you, Thanks to NathanBookham.
Thank you very much!
ygecesefa said:
How to fix a Hardbricked RAY
I bricked my Ray last night when I try to relock.after flashing It stucked flash mode.I could nt use flash tool any more!Also fastboot mode wasnt working.When I try to PC companion it was nt starting directly from flash mode.Then an old version updater bringed back my phone!You can even fix if xRecovery doesn't work!
RAY or other xperias WITHOUT using PC Companion or Flashtool.
First, Download the executable here
Install on a Windows PC
Once installed, Update Service should start automatically. If not, find it in the Start menu.
Find the RAY from the list
It will ask you to connect your phone by taking out the battery, waiting 5 seconds before putting the battery back in again, then pressing and holding the Back button while inserting the MicroUSB cable into the RAY
Release the back button when told to do so
Update Service will download the latest ROM, then flash it to your phone
Unplug your phone, then turn it on and it is guaranteed to work if you follow the instructions step by step
I hope this helped, and if it worked for you, Thanks to NathanBookham.
Click to expand...
Click to collapse
Great work!
ygecesefa said:
How to fix a Hardbricked RAY
I bricked my Ray last night when I try to relock.after flashing It stucked flash mode.I could nt use flash tool any more!Also fastboot mode wasnt working.When I try to PC companion it was nt starting directly from flash mode.Then an old version updater bringed back my phone!You can even fix if xRecovery doesn't work!
RAY or other xperias WITHOUT using PC Companion or Flashtool.
First, Download the executable here
Install on a Windows PC
Once installed, Update Service should start automatically. If not, find it in the Start menu.
Find the RAY from the list
It will ask you to connect your phone by taking out the battery, waiting 5 seconds before putting the battery back in again, then pressing and holding the Back button while inserting the MicroUSB cable into the RAY
Release the back button when told to do so
Update Service will download the latest ROM, then flash it to your phone
Unplug your phone, then turn it on and it is guaranteed to work if you follow the instructions step by step
I hope this helped, and if it worked for you, Thanks to NathanBookham.
Click to expand...
Click to collapse
if only this was posted a week earlier, i spent $50 for a JTAG Riffbox service for unbrick... sigh...
Hi there, may i feature this on my sticky tutorial above? Great post thanks!
But the tutorial not showing I must replaced the battery..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
very nice. thank you.
desaturated said:
But the tutorial not showing I must replaced the battery..
Click to expand...
Click to collapse
In pc conpanion it requires it and it doesnt start flashing befare doing it.So you cant recovery your bricked phone but in old version it doesnt equire it.
hansip87 said:
Hi there, may i feature this on my sticky tutorial above? Great post thanks!
Click to expand...
Click to collapse
Yes alright.That is the purpose helping to people.
i got problems the windows dont recognize the device.. please help unidentified device.. what should i do.. ?
cotangent05 said:
i got problems the windows dont recognize the device.. please help unidentified device.. what should i do.. ?
Click to expand...
Click to collapse
Firstly unistall all sony ericson program.You can install pda net which is include usb flash drivers or install latest pc companion then unistall it but keep usb drivers after install the old version update service.
i revived it by the new updated PCC repair mode.. thanks
pls help
hi! i did all what you told to recover my Ray but... phone recognize by the computer as ZEUS flash device but update service given by this forum doesnt recognize or move forward. could any one pls help me?
Thanx!
Unistall all drivers try pda. Net drivers
Sent from my ST18i using XDA App
Hi! PDA net need a anroide device to install in the PC. my phone doesnt recognize when its in the installation process. How do i install it?? If i use different Android phone is it OK??. i used PDAnet 3.0 version
thilina000 said:
Hi! PDA net need a anroide device to install in the PC. my phone doesnt recognize when its in the installation process. How do i install it?? If i use different Android phone is it OK??. i used PDAnet 3.0 version
Click to expand...
Click to collapse
Yes try with another android phone with debugging opened
Shouldn't you be thanking someone...
Sent from Samsung Galaxy Ace
NathanBookham said:
Shouldn't you be thanking someone...
Sent from Samsung Galaxy Ace
Click to expand...
Click to collapse
I added thank notice to you since topic opened.Thank you again
Valla nasıl teşekkür etsem azdır. Tamir edilemeyecek şekilde bozduğumu sanıp hemen ardından bu yöntemle halledince insan bi değişik hissediyor...
My Phone.
Okay i flashed my phone and now it get's stuck at the Sony logo i can flash other firmware it just stays on the sony logo for 15mins ive left it and nothing.
ST18I Ray was branded vodafone
here are some logs ive saved
Code:
17/028/2012 20:28:12 - INFO - <- This level is successfully initialized
17/028/2012 20:28:12 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
17/028/2012 20:28:12 - INFO - You can drag and drop ftf files here to start flashing them
17/028/2012 20:28:18 - INFO - Device disconnected
17/028/2012 20:28:20 - INFO - Selected Xperia_Relock_bootloader.ftf
17/028/2012 20:28:20 - INFO - Preparing files for flashing
17/028/2012 20:28:20 - INFO - Please connect your device into flashmode.
17/028/2012 20:28:32 - INFO - Device connected in flash mode
17/028/2012 20:28:32 - INFO - Opening device for R/W
17/028/2012 20:28:32 - INFO - Reading device information
17/028/2012 20:28:32 - INFO - Phone ready for flashmode operations.
17/028/2012 20:28:32 - INFO - Start Flashing
17/028/2012 20:28:32 - INFO - Processing loader
17/028/2012 20:28:32 - INFO - Checking header
17/028/2012 20:28:32 - INFO - Flashing data
17/028/2012 20:28:37 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTABLE
17/028/2012 20:28:37 - INFO - Flashing preset.ta
17/028/2012 20:28:37 - INFO - Writing TA unit : [00, 00, 08, B2, 00, 00, 00, 02, 00, 00]
17/028/2012 20:28:37 - INFO - Ending flash session
17/028/2012 20:28:37 - INFO - Flashing finished.
17/028/2012 20:28:37 - INFO - Please unplug and start your phone
17/028/2012 20:28:37 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
17/028/2012 20:28:38 - INFO - Device connected in flash mode
Code:
17/047/2012 18:47:45 - INFO - <- This level is successfully initialized
17/047/2012 18:47:45 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
17/047/2012 18:47:45 - INFO - You can drag and drop ftf files here to start flashing them
17/047/2012 18:47:51 - INFO - Device disconnected
17/047/2012 18:47:58 - INFO - Selected ST18i_4.0.2.A.0.42.ftf
17/047/2012 18:47:58 - INFO - Preparing files for flashing
17/048/2012 18:48:04 - INFO - Please connect your device into flashmode.
17/048/2012 18:48:22 - INFO - Device connected in flash mode
17/048/2012 18:48:22 - INFO - Opening device for R/W
17/048/2012 18:48:23 - INFO - Reading device information
17/048/2012 18:48:23 - INFO - Phone ready for flashmode operations.
17/048/2012 18:48:23 - INFO - Start Flashing
17/048/2012 18:48:23 - INFO - Processing loader
17/048/2012 18:48:23 - INFO - Checking header
17/048/2012 18:48:23 - INFO - Flashing data
17/048/2012 18:48:28 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTABLE
17/048/2012 18:48:28 - INFO - Disabling final data verification check
17/048/2012 18:48:28 - INFO - Processing kernel.sin
17/048/2012 18:48:28 - INFO - Checking header
17/048/2012 18:48:28 - INFO - Flashing data
17/048/2012 18:48:30 - INFO - Processing fota1.sin
17/048/2012 18:48:30 - INFO - Checking header
17/048/2012 18:48:30 - INFO - Flashing data
17/048/2012 18:48:31 - INFO - Processing fota0.sin
17/048/2012 18:48:31 - INFO - Checking header
17/048/2012 18:48:31 - INFO - Flashing data
17/048/2012 18:48:32 - INFO - Processing adsp.sin
17/048/2012 18:48:32 - INFO - Checking header
17/048/2012 18:48:32 - INFO - Flashing data
17/048/2012 18:48:34 - INFO - Processing amss_fs.sin
17/048/2012 18:48:34 - INFO - Checking header
17/048/2012 18:48:34 - INFO - Flashing data
17/048/2012 18:48:34 - INFO - Processing amss.sin
17/048/2012 18:48:34 - INFO - Checking header
17/048/2012 18:48:34 - INFO - Flashing data
17/048/2012 18:48:41 - INFO - Processing apps_log.sin
17/048/2012 18:48:41 - INFO - Checking header
17/048/2012 18:48:41 - INFO - Flashing data
17/048/2012 18:48:41 - INFO - Processing system.sin
17/048/2012 18:48:41 - INFO - Checking header
17/048/2012 18:48:41 - INFO - Flashing data
17/050/2012 18:50:18 - INFO - Processing userdata.sin
17/050/2012 18:50:18 - INFO - Checking header
17/050/2012 18:50:18 - INFO - Flashing data
17/050/2012 18:50:23 - INFO - Processing cache.sin
17/050/2012 18:50:23 - INFO - Checking header
17/050/2012 18:50:23 - INFO - Flashing data
17/050/2012 18:50:24 - INFO - Ending flash session
17/050/2012 18:50:24 - INFO - Flashing finished.
17/050/2012 18:50:24 - INFO - Please unplug and start your phone
17/050/2012 18:50:24 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
17/050/2012 18:50:24 - INFO - Device connected in flash mode
Now ive searched and searched and found nothing to fix this apart from - FlashTool_0.2.9.1_FOTAUnbrick and this post and nothing seems to get it booted back up..
i can update from seus and that does nothing as well still stuck at Sony logo.
any ideas
thank's
Hi XDA.
I've been searching and searching for the answer on XDA and other websites and can't quite find the answer i need.
I'm on GB 2.3.4.42 with root and CWM Recovery installed (with a few backups made on the SD Card with a locked bl)
I have checked my phone and I have a locked bootloader which cannot be unlocked (as far as i know?) And I was wondering if it is possible that flashing the stock ICS would work even if my bootloader is locked?
If I could also have a little help on how I would do this that would be fantastic.
Thank you again for taking your time to help me out. Such a noob lol.
Edit:
Added log when I try to flash:
08/054/2012 11:54:26 - INFO - <- This level is successfully initialized
08/054/2012 11:54:26 - INFO - Flashtool Version 0.9.8.0 built on 2012-10-01 19:35:32
08/054/2012 11:54:26 - INFO - You can drag and drop ftf files here to start flashing them
08/054/2012 11:54:34 - INFO - Device connected with USB debugging on
08/054/2012 11:54:34 - INFO - Connected device : MT15
08/054/2012 11:54:34 - INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
08/054/2012 11:54:34 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf / Build number : 4.0.2.A.0.42
08/054/2012 11:54:35 - INFO - Root Access Allowed
08/055/2012 11:55:49 - INFO - Selected MT15_4.1.B.0.431_Global.ftf
08/055/2012 11:55:49 - INFO - Preparing files for flashing
08/055/2012 11:55:53 - INFO - Please connect your device into flashmode.
08/056/2012 11:56:01 - INFO - Device disconnected
08/056/2012 11:56:36 - INFO - Device connected in flash mode
08/056/2012 11:56:36 - INFO - Opening device for R/W
08/056/2012 11:56:37 - INFO - Start Flashing
08/056/2012 11:56:37 - INFO - Processing loader
08/056/2012 11:56:37 - INFO - Checking header
08/056/2012 11:56:37 - INFO - Ending flash session
08/056/2012 11:56:37 - ERROR -
08/056/2012 11:56:37 - ERROR - Error flashing. Aborted
08/056/2012 11:56:37 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Take care guys and thanks a lot for your help.
Laurie
Try with Sony Mobile Update Serivice before (normal update), full factory restore. Why using flashtool to update?
If with flashtool:
Try again, re download firmware .587 from THIS (why previous .431 if you are flashing?)full charge, disable antivirus or firewall.
Select all wipes, no excludes, check "no final verification".
Enable usb debug on the phone and then shut it off. Connect it (when power off connect it while long pressing "back button") to the pc following flashtool points.
BTW are you really saying that you couldn't find any answer to "Can I update to ICS still I am with locked bootloader?" Maybe you didn't search too much, beacuse it is quite known by all that locked bootloader means that you can flash only original signed Sony firmware.
In fact you had not to worry about bootloader, if you didn't know anything about it and you didn't touch it :good:
So, in final, do you know what are you doing, before messing up something?
http://forum.xda-developers.com/showthread.php?t=1973017 hope it helps
Just use seus..just follow the step..
Sent from my Xperia Neo V using xda app-developers app
Bertellio said:
Try with Sony Mobile Update Serivice before (normal update), full factory restore. Why using flashtool to update?
If with flashtool:
Try again, re download firmware .587 from THIS (why previous .431 if you are flashing?)full charge, disable antivirus or firewall.
Select all wipes, no excludes, check "no final verification".
Enable usb debug on the phone and then shut it off. Connect it (when power off connect it while long pressing "back button") to the pc following flashtool points.
BTW are you really saying that you couldn't find any answer to "Can I update to ICS still I am with locked bootloader?" Maybe you didn't search too much, beacuse it is quite known by all that locked bootloader means that you can flash only original signed Sony firmware.
In fact you had not to worry about bootloader, if you didn't know anything about it and you didn't touch it :good:
So, in final, do you know what are you doing, before messing up something?
Click to expand...
Click to collapse
Thanks for your help so far guys, I do know what I'm doing generally but when I go to flash now i've encountered another problem:
When I put debug on, put it into msc and then reboot the phone ready for flash I get this error and the whole thing aborts. This happens with Sony Companion (when I tried the .62 update) and SUS - which meant i couldn't get past the 3rd page :C
Any idea what the problem is?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does this happen with other usb devices..or only with the phone???
If it happens with all devices..then restart pc..happened to me once..restarting solved it..
If its only with the phone..then reinstall ADB DRIVERS.. Goto Flashtool >drivers and click on Flashtool-drivers.exe
Just try again It will work
LoneWanderer said:
Does this happen with other usb devices..or only with the phone???
If it happens with all devices..then restart pc..happened to me once..restarting solved it..
If its only with the phone..then reinstall ADB DRIVERS.. Goto Flashtool >drivers and click on Flashtool-drivers.exe
Click to expand...
Click to collapse
Apreicate your help.
When I go to reinstall the Drivers I forgot to mention this and didn't really think anything of it, I get this error:
The phone also doesn't appear in my driver manager either =/
The error I get:
Also showing my phone connected to my pc:
I have absolutely no clue where to go from here :c
+Xperia > Connect > MSC
+Developer Options > USB Debugging on
+Security > Unknown Resources
+Install Drivers : Flashmode // ADB Neo drivers
+Make Sony PC Companion recognize your phone.After it recognizes..close it.
+If your system is 32 bit , open flashtool.exe if it is 64 bit , open flashtool64.exe .
+Sometimes windows install drivers for your phone.Wait until it finish.
+And don't forget.Don't open Flashtool - doom or other root / boot stuffs together.ADB servers will be out of date.So just open flashtool.
+If you have a antivurs, close it.
+If there is another program which can delete files automatically..you should close it too!
+Be fast when you are trying to make phone enter flashmode.Don't wait much.
+When you try to install drivers, installer will open.And it will ask you for your permission.Just accept all of them.
Don't forget wipe data / cache..and be sure that .ftf is right.
I hope you will make it
Is that Windows8??....then the best option would be to use a Win7 pc..but if u dont have one rite now..
In your device manager..goto Sony saXXXX..update ADB interface driver software..if that doesnt work then..
uninstall driver..disconnect usb..unselect USB debuggin..reselect it and plug in the usb..let windows install drivers..
Thanks so much guys for your help!
I've just changed from the USB2.0 port to a 3.0 and the S1Boot driver suddenly installed and now flashing! I'll edit this when its finished flashing!
BRB.
EDIT 1:
It's been stuck at this for 5 mins now: should I be worried?
08/023/2012 16:23:38 - INFO - <- This level is successfully initialized
08/023/2012 16:23:39 - INFO - Flashtool Version 0.9.8.0 built on 2012-10-01 19:35:32
08/023/2012 16:23:39 - INFO - You can drag and drop ftf files here to start flashing them
08/023/2012 16:23:46 - INFO - Device disconnected
08/024/2012 16:24:04 - INFO - Selected MT15_4.1.B.0.431_Global.ftf
08/024/2012 16:24:04 - INFO - Preparing files for flashing
08/024/2012 16:24:08 - INFO - Please connect your device into flashmode.
08/024/2012 16:24:28 - INFO - Flash canceled
08/025/2012 16:25:04 - INFO - Device connected with USB debugging on
08/025/2012 16:25:05 - INFO - Connected device : MT15
08/025/2012 16:25:06 - INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
08/025/2012 16:25:06 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf / Build number : 4.0.2.A.0.42
08/025/2012 16:25:07 - INFO - Root Access Allowed
08/025/2012 16:25:18 - INFO - Selected MT15i_4.1.B.0.587_Global.ftf
08/025/2012 16:25:18 - INFO - Preparing files for flashing
08/025/2012 16:25:26 - INFO - Please connect your device into flashmode.
08/025/2012 16:25:30 - INFO - Device disconnected
08/025/2012 16:25:41 - INFO - Device connected in flash mode
08/025/2012 16:25:41 - INFO - Opening device for R/W
08/025/2012 16:25:42 - INFO - Reading device information
08/025/2012 16:25:42 - INFO - Phone ready for flashmode operations.
08/025/2012 16:25:42 - INFO - Start Flashing
08/025/2012 16:25:42 - INFO - Processing loader
08/025/2012 16:25:42 - INFO - Checking header
08/025/2012 16:25:42 - INFO - Flashing data
08/025/2012 16:25:44 - INFO - Loader : S1_Loader_Root_773f - Version : R4A069 / Bootloader status : NOT_ROOTABLE
08/025/2012 16:25:44 - INFO - Disabling final data verification check
08/025/2012 16:25:44 - INFO - Processing kernel.sin
08/025/2012 16:25:44 - INFO - Checking header
08/025/2012 16:25:44 - INFO - Flashing data
08/025/2012 16:25:46 - INFO - Processing fota1.sin
08/025/2012 16:25:46 - INFO - Checking header
08/025/2012 16:25:46 - INFO - Flashing data
08/025/2012 16:25:47 - INFO - Processing fota0.sin
08/025/2012 16:25:47 - INFO - Checking header
08/025/2012 16:25:47 - INFO - Flashing data
08/025/2012 16:25:48 - INFO - Processing adsp.sin
08/025/2012 16:25:48 - INFO - Checking header
08/025/2012 16:25:48 - INFO - Flashing data
08/025/2012 16:25:51 - INFO - Processing amss_fs_hallon.sin
08/025/2012 16:25:51 - INFO - Checking header
08/025/2012 16:25:51 - INFO - Flashing data
08/025/2012 16:25:51 - INFO - Processing amss.sin
08/025/2012 16:25:51 - INFO - Checking header
08/025/2012 16:25:51 - INFO - Flashing data
08/025/2012 16:25:58 - INFO - Processing vendor.sin
08/025/2012 16:25:58 - INFO - Checking header
08/025/2012 16:25:58 - INFO - Flashing data
08/026/2012 16:26:27 - INFO - Ending flash session
Click to expand...
Click to collapse
hmm..it should say flashing finished almost instantaneously..at this point..
Did u follow the steps mentioned in my guide perfectly??? wipe data, cache, apps log before flashing??
If you look at the middle you Will see "not rootable", so probably you've done something wrong.
Why did you use S1 driver?
Anyway uninstall flashtool, then open update service and follow it to the end. This should make you connect the phone in flashmode and the driver Will be installed automatically if connected to the net.
...and you Will install ics.
Again use flashtool only if Update Service is not helping you in order to get what you want.
Sent from my MT15i using xda app-developers app
SOLVED!
LoneWanderer said:
hmm..it should say flashing finished almost instantaneously..at this point..
Did u follow the steps mentioned in my guide perfectly??? wipe data, cache, apps log before flashing??
Click to expand...
Click to collapse
Sorry I couldn't reply sooner, been busy.
Anyways, I stopped the flash while it was in progress which "bricked" it. So I used SEUS to restore it and then used your instructions to reflash it again. Worked flawlessly the second time! Thank you so much everyone for your help! :good:
Hi, i've upgraded My neo V from 2.3.4 GB to ICS, then, many problems started to appears like anormal screen battery consumption, and autobrightness
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried downgrading back to GB but everytime i try... my phone ends bricked, because flashtool has problems flashing firmwares... stops flashing..
LOG
30/045/2012 12:45:36 - INFO - <- This level is successfully initialized
30/045/2012 12:45:36 - INFO - Flashtool Version 0.9.0.0 built on 2012-07-19 22:57:15
30/045/2012 12:45:36 - INFO - You can drag and drop ftf files here to start flashing them
30/045/2012 12:45:45 - INFO - Device connected with USB debugging off
30/045/2012 12:45:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
30/045/2012 12:45:54 - INFO - Device disconnected
30/045/2012 12:45:57 - INFO - Device connected with USB debugging off
30/045/2012 12:45:57 - INFO - For 2011 devices line, be sure you are not in MTP mode
30/045/2012 12:45:58 - INFO - Device connected with USB debugging on
30/045/2012 12:45:59 - INFO - Connected device : MT11
30/045/2012 12:45:59 - INFO - Installed version of busybox : N/A
30/045/2012 12:45:59 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf
30/046/2012 12:46:33 - INFO - Selected NeoV.4.0.2.A.0.62.ftf
30/046/2012 12:46:33 - INFO - Preparing files for flashing
30/046/2012 12:46:52 - INFO - Please connect your device into flashmode.
30/046/2012 12:46:59 - INFO - Device disconnected
30/047/2012 12:47:14 - INFO - Device connected in flash mode
30/047/2012 12:47:14 - INFO - Opening device for R/W
30/047/2012 12:47:14 - INFO - Reading device information
30/047/2012 12:47:14 - INFO - Phone ready for flashmode operations.
30/047/2012 12:47:14 - INFO - Start Flashing
30/047/2012 12:47:14 - INFO - Flashing loader
30/047/2012 12:47:17 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : NOT_ROOTABLE
30/047/2012 12:47:17 - INFO - Disabling final data verification check
30/047/2012 12:47:17 - WARN - This file is ignored : simlock.ta
30/047/2012 12:47:17 - INFO - Flashing kernel.sin
30/047/2012 12:47:20 - INFO - Flashing fota0.sin
30/047/2012 12:47:22 - INFO - Flashing fota1.sin
30/047/2012 12:47:23 - INFO - Flashing adsp.sin
30/047/2012 12:47:25 - INFO - Flashing amss_fs_haida.sin
30/047/2012 12:47:26 - INFO - Flashing amss.sin
30/047/2012 12:47:37 - INFO - Flashing apps_log.sin
30/047/2012 12:47:37 - INFO - Flashing system.sin
30/048/2012 12:48:23 - INFO - Ending flash session
Click to expand...
Click to collapse
What i have to do? Thanks in advance
smsalom said:
Hi, i've upgraded My neo V from 2.3.4 GB to ICS, then, many problems started to appears like anormal screen battery consumption, and autobrightness
View attachment 1602841
I tried downgrading back to GB but everytime i try... my phone ends bricked, because flashtool has problems flashing firmwares... stops flashing..
View attachment 1602923
LOG
What i have to do? Thanks in advance
Click to expand...
Click to collapse
Try not to disable final verification !
---------- Post added at 07:17 PM ---------- Previous post was at 07:15 PM ----------
Here is the link for Neo V ftf
GB for Neo V
Phillip_Hutchinson said:
Try not to disable final verification !
---------- Post added at 07:17 PM ---------- Previous post was at 07:15 PM ----------
Here is the link for Neo V ftf
GB for Neo V
Click to expand...
Click to collapse
30/018/2012 13:18:14 - INFO - <- This level is successfully initialized
30/018/2012 13:18:14 - INFO - Flashtool Version 0.9.0.0 built on 2012-07-19 22:57:15
30/018/2012 13:18:14 - INFO - You can drag and drop ftf files here to start flashing them
30/018/2012 13:18:19 - INFO - Device disconnected
30/019/2012 13:19:07 - INFO - Device connected with USB debugging off
30/019/2012 13:19:07 - INFO - For 2011 devices line, be sure you are not in MTP mode
30/019/2012 13:19:48 - INFO - Device connected with USB debugging on
30/019/2012 13:19:49 - INFO - Connected device : MT11
30/019/2012 13:19:49 - INFO - Installed version of busybox : N/A
30/019/2012 13:19:49 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf
30/020/2012 13:20:22 - INFO - Selected NeoV.4.0.2.A.0.62.ftf
30/020/2012 13:20:22 - INFO - Preparing files for flashing
30/020/2012 13:20:49 - INFO - Please connect your device into flashmode.
30/021/2012 13:21:01 - INFO - Device disconnected
30/021/2012 13:21:21 - INFO - Opening device for R/W
30/021/2012 13:21:22 - INFO - Start Flashing
30/021/2012 13:21:22 - INFO - Flashing loader
30/021/2012 13:21:22 - INFO - Ending flash session
30/021/2012 13:21:22 - ERROR -
30/021/2012 13:21:22 - ERROR - Error flashing. Aborted
30/021/2012 13:21:22 - INFO - Pushing C:\Flashtool\.\devices\MT11\busybox\1.19.0\busybox to /data/local/tmp/busybox
30/021/2012 13:21:22 - INFO - Device connected in flash mode
30/021/2012 13:21:22 - ERROR - error: device not found
30/021/2012 13:21:39 - INFO - Device disconnected
30/021/2012 13:21:45 - INFO - Device connected in flash mode
30/022/2012 13:22:04 - INFO - Selected NeoV.4.0.2.A.0.62.ftf
30/022/2012 13:22:04 - INFO - Preparing files for flashing
30/022/2012 13:22:06 - INFO - Please connect your device into flashmode.
30/022/2012 13:22:07 - INFO - Opening device for R/W
30/022/2012 13:22:07 - INFO - Reading device information
30/022/2012 13:22:24 - INFO - Start Flashing
30/022/2012 13:22:24 - INFO - Flashing loader
30/022/2012 13:22:24 - INFO - Ending flash session
30/022/2012 13:22:24 - ERROR -
30/022/2012 13:22:24 - ERROR - Error flashing. Aborted
30/022/2012 13:22:25 - INFO - Device disconnected
Click to expand...
Click to collapse
I didn´t... this is a newer log...
smsalom said:
I didn´t... this is a newer log...
Click to expand...
Click to collapse
SO let's try to download the link i provided
Ok thanks i will try it asap, could be controller problems??
Sent from my MT11i using xda app-developers app
Phillip_Hutchinson said:
SO let's try to download the link i provided
Click to expand...
Click to collapse
I have tried your firmware, flashtool stops flashing again...
I didn't tried to disable final verification
I Have to unlock bootloader in order to use flashtools??
01/027/2013 10:27:38 - INFO - <- This level is successfully initialized
01/027/2013 10:27:39 - INFO - Flashtool Version 0.9.0.0 built on 2012-07-19 22:57:15
01/027/2013 10:27:39 - INFO - You can drag and drop ftf files here to start flashing them
01/027/2013 10:27:48 - INFO - Device connected with USB debugging on
01/027/2013 10:27:49 - INFO - Connected device : MT11
01/027/2013 10:27:49 - INFO - Installed version of busybox : N/A
01/027/2013 10:27:49 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf
01/030/2013 10:30:49 - INFO - Selected NeoV.4.0.2.A.0.62.ftf
01/030/2013 10:30:49 - INFO - Preparing files for flashing
01/031/2013 10:31:15 - INFO - Please connect your device into flashmode.
01/031/2013 10:31:25 - INFO - Device disconnected
01/031/2013 10:31:46 - INFO - Device connected in flash mode
01/031/2013 10:31:46 - INFO - Opening device for R/W
01/031/2013 10:31:46 - INFO - Reading device information
01/031/2013 10:31:47 - INFO - Phone ready for flashmode operations.
01/031/2013 10:31:47 - INFO - Start Flashing
01/031/2013 10:31:47 - INFO - Flashing loader
01/031/2013 10:31:49 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : NOT_ROOTABLE
01/031/2013 10:31:49 - WARN - This file is ignored : simlock.ta
01/031/2013 10:31:49 - INFO - Flashing kernel.sin
01/031/2013 10:31:52 - INFO - Flashing fota0.sin
01/031/2013 10:31:54 - INFO - Flashing fota1.sin
01/031/2013 10:31:55 - INFO - Flashing adsp.sin
01/031/2013 10:31:58 - INFO - Flashing amss_fs_haida.sin
01/031/2013 10:31:59 - INFO - Flashing amss.sin
01/032/2013 10:32:11 - INFO - Flashing apps_log.sin
01/032/2013 10:32:11 - INFO - Flashing system.sin
01/032/2013 10:32:53 - INFO - Ending flash session
Click to expand...
Click to collapse
May be you can try re installing the flashtool.. the link provided by phillip is absolutely working.. may b its your drivers or flashtool problem..
Most probably i feel its your drivers problem.. try re installing them..
Hit thanks if i fulfilled your need
Sent from my Neo V using xda premium
vishal_android freak said:
May be you can try re installing the flashtool.. the link provided by phillip is absolutely working.. may b its your drivers or flashtool problem..
Most probably i feel its your drivers problem.. try re installing them..
Hit thanks if i fulfilled your need
Sent from my Neo V using xda premium
Click to expand...
Click to collapse
i have tried to re install flashtool too... mmm i could format my computer to solve this problem thanks you!
Instead why don't you try the same on a different pc?
If it doesn't work still, its your phone's issue!
Sent from my MT11i using xda premium
Hit thanks dont say thanks next time..
Sent from my Neo V using xda premium
Solved
Try flashing. 587 kernel!
Btw what's the issue with entire ftf??
Just try with a newer version of flashtool!
Sent from my MT11i using xda premium
Solved
Buy a new phone
Hey,
i reflashed the Firmware using Seus.
After Seus finished, it says to reboot, so i did.
But it doesnt Boot up, there is a black screen with a bit of light, then it is really black and then its again a black screen with light. Looks like a bootloop.
What can i do?
Jan
theKingJan said:
Hey,
i reflashed the Firmware using Seus.
After Seus finished, it says to reboot, so i did.
But it doesnt Boot up, there is a black screen with a bit of light, then it is really black and then its again a black screen with light. Looks like a bootloop.
What can i do?
Jan
Click to expand...
Click to collapse
Before reflashed with SEUS, did you unlock bootloader? (this should not be a problem)
Before reflashed with SEUS, did you flash custom kernel? (this should not be a problem)
Before reflashed with SEUS, did you lock bootloader still with a custom kernel? (this is a problem)
Else
Try to remove the SD-card and the turn on the phone without SD-card.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If it still do not boot up. Try boot with charger plugged in.
If it still do not boot up. Try to reflash again.
No i did nothing, its was full stock with locked bootloaders...
The SD-Card is not insert...
It doesnt boot up while the charger is plugged in, but it installs the driver...
I reflashed...
Nothing works
Its not my phone, my friend had many problems:
-slow
-it only boot sometimes
-the notification bar was sometimes in the middle of the screen, and everything was postponed...
theKingJan said:
It doesnt boot up while the charger is plugged in, but it installs the driver...
Click to expand...
Click to collapse
Try wallplug, not PC
EDIT: I had this problem too once. Solved it by changing battery (my wife got same phone).
My battery worked well in my wifes phone.
I think it's related to ballery stats
With onother full battery of the same type it doesnt work either...
Download this file last X10mini pro Firmware and flash it via flash tool
Rempty said:
Download this file last X10mini pro Firmware and flash it via flash tool
Click to expand...
Click to collapse
I did, still the same thing :
there is a black screen with a bit of light, then it is really black and then its again a black screen with light.
Heres the log:
25/051/2013 18:51:10 - INFO - <- This level is successfully initialized
25/051/2013 18:51:10 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
25/051/2013 18:51:10 - INFO - You can drag and drop ftf files here to start flashing them
25/051/2013 18:51:15 - INFO - Device disconnected
25/051/2013 18:51:18 - INFO - Selected Full_SYS___KernelU20i-mini_pro_update_1.0_2.1.1.C.0.0.ftf
25/051/2013 18:51:18 - INFO - Preparing files for flashing
25/051/2013 18:51:19 - INFO - Please connect your device into flashmode.
25/051/2013 18:51:32 - INFO - Device connected in flash mode
25/051/2013 18:51:32 - INFO - Opening device for R/W
25/051/2013 18:51:32 - INFO - Reading device information
25/051/2013 18:51:32 - INFO - Phone ready for flashmode operations.
25/051/2013 18:51:32 - INFO - Current device : U20i - CB511L9232 - 1238-7168_R5B - 1235-3411_2.1.1.C.0.0 - WORLD-1-8_2.1.1.C.0.0
25/051/2013 18:51:32 - INFO - Start Flashing
25/051/2013 18:51:32 - INFO - Processing loader
25/051/2013 18:51:32 - INFO - Checking header
25/051/2013 18:51:32 - INFO - Flashing data
25/051/2013 18:51:33 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
25/051/2013 18:51:33 - INFO - Processing kernel.sin
25/051/2013 18:51:33 - INFO - Checking header
25/051/2013 18:51:33 - INFO - Flashing data
25/051/2013 18:51:37 - INFO - Processing fota1.sin
25/051/2013 18:51:37 - INFO - Checking header
25/051/2013 18:51:37 - INFO - Flashing data
25/051/2013 18:51:37 - INFO - Processing fota0.sin
25/051/2013 18:51:37 - INFO - Checking header
25/051/2013 18:51:37 - INFO - Flashing data
25/051/2013 18:51:38 - INFO - Processing amss_fs.sin
25/051/2013 18:51:38 - INFO - Checking header
25/051/2013 18:51:38 - INFO - Flashing data
25/051/2013 18:51:38 - INFO - Processing amss.sin
25/051/2013 18:51:38 - INFO - Checking header
25/051/2013 18:51:38 - INFO - Flashing data
25/051/2013 18:51:49 - INFO - Processing system.sin
25/051/2013 18:51:49 - INFO - Checking header
25/051/2013 18:51:49 - INFO - Flashing data
25/053/2013 18:53:39 - INFO - Processing userdata.sin
25/053/2013 18:53:39 - INFO - Checking header
25/053/2013 18:53:39 - INFO - Flashing data
25/053/2013 18:53:43 - INFO - Processing cache.sin
25/053/2013 18:53:43 - INFO - Checking header
25/053/2013 18:53:43 - INFO - Flashing data
25/053/2013 18:53:43 - INFO - Ending flash session
25/053/2013 18:53:43 - INFO - Flashing finished.
25/053/2013 18:53:43 - INFO - Please unplug and start your phone
25/053/2013 18:53:43 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
25/053/2013 18:53:43 - INFO - Device connected in flash mode
25/054/2013 18:54:04 - INFO - Device disconnected
Just pull out battery for 3 minutes.
then plug charger & if you See Sony LOGO press the power button to bootup (1minute after charging)
If you can't see Sony logo so just flash the stock frimware again & you'll be fine:thumbup:
#p.s search in the net for pulling out x10 's battery,u must disconnect a black cable near battery using a screwdriver
sent via ULTIMATE GB beta
I pulled out the battery the normal way.... I dindmt found the cable...
But there is still the black screen and no sony logo. And i reflashed two times the stock firmware.
theKingJan said:
I pulled out the battery the normal way.... I dindmt found the cable...
But there is still the black screen and no sony logo. And i reflashed two times the stock firmware.
Click to expand...
Click to collapse
Sounds like a hardward fault, since you also said the notifications were sometimes in the middle of the screen, I would think the flex is damaged ( the ribbon cable that connects the phone/keyboard part to the screen ), replacing that may solve your problems.
Okay, but what have this connector to do with the booting?
Is there any Service Manual from the x10 mini pro?
This Flex:
http://www.ebay.de/itm/Original-Fle...ria-X10-Mini-Pro-/110882980860#ht_1752wt_1163
or
http://www.nortonline.gr/nortonline..._cable_sony_ericsson_xperia_x10_mini_pro.html
there are so many..
Tech docs for Xperia X10 Mini / Pro
I got all the tech docs for X10 mini/pro here:
https://www.box.com/XperiaX10mini-pro-tech-docs
Thank you but where is this connector placed`?
Upper or lower unit?
theKingJan said:
Thank you but where is this connector placed`?
Upper or lower unit?
Click to expand...
Click to collapse
not a clue
did you try to flash cwm? can you boot to cwm?
if you can try at clear battery stats
How can i flash CWM with the Flashtool?
Edit:
I need root, or not...
It seems from the log that your bootloader can not be unlocked. You are in a bricked state. Try to google out the solution.
Sent from my X10MiniPro using xda premium