Hi guys!
I'm having a problem with this phone.
Was trying to flash a ROM from cybermaus.
I've rooted the phone with MTKDroid Tools. It was fine, after that i had problems with running FlashTools to run a ROM.
So i tried many methods to ad new ROM, and suddenly my phone, when started up - shows only chinese lenovo logo...
As far as android's Recovery Mode doesn't support "unsigned" ROMs, I've downloaded a "stock_121122_backup.zip" ROM, but unfortunatelly I get a sign verification error :/
ClockworkMod doesn't support this device, so no chance to run a different ROM. Also wiping data and factory restoration doesn't give any progress...
What can I do now? I have a backup made with Droid before Rooting it, but it didn't do a thing.
Is there any way to run "unsigned" ROM from Android's recovery mode??
Please help - after two days of tough fight i'm ready to cry
When trying to use SP Flash to download backup made by Droid i get this:
SP Flash Error (8038)
what is wrong??
Related
hi guys m a utter noob about porting n this is the first time i will try doing it i have rooted phones flashed custom ROMs etc etc
now i got a new Xolo Q700s i wanna port Cherry mobile Fuze ROM on it can i do it ? the oonly difference is the front cam and the battery both have same MT6582M 1GB RAM 8 MP camera screen res and another thing is i cant get the stock rom for Q700S anyway online can someone point me a way where i can get the system boot recovery etc .img files ???
BUMP!!!!!!!
Tarun93 said:
hi guys m a utter noob about porting n this is the first time i will try doing it i have rooted phones flashed custom ROMs etc etc
now i got a new Xolo Q700s i wanna port Cherry mobile Fuze ROM on it can i do it ? the oonly difference is the front cam and the battery both have same MT6582M 1GB RAM 8 MP camera screen res and another thing is i cant get the stock rom for Q700S anyway online can someone point me a way where i can get the system boot recovery etc .img files ???
Click to expand...
Click to collapse
Without the stock rom, it is so risky to test custom roms, almost impossible.
But if you can flash TWRP or CWM, you can backup your stock rom to restore everytime you fail.
I suggest you to find the custom recovery first.
Use this Mobile Uncle Tools (MTK tools) to flash custom recovery, the most easy way to flash recovery for MTK devices. If you want to know how to use it, go to www.kokoandroid.weebly.com and follow the step 2,3 and 5.
Good Luck in porting rom. :fingers-crossed:
Sithu Htun said:
Without the stock rom, it is so risky to test custom roms, almost impossible.
But if you can flash TWRP or CWM, you can backup your stock rom to restore everytime you fail.
I suggest you to find the custom recovery first.
Use this Mobile Uncle Tools (MTK tools) to flash custom recovery, the most easy way to flash recovery for MTK devices. If you want to know how to use it, go to www.kokoandroid.weebly.com and follow the step 2,3 and 5.
Good Luck in porting rom. :fingers-crossed:
Click to expand...
Click to collapse
could not find cwm for my phone so did a self mod and got CWM working in the q700s made a backup of my Stock rom which can be flashed with sp flasher n not i m off for porting thanx for the help anyways
Tarun93 said:
could not find cwm for my phone so did a self mod and got CWM working in the q700s made a backup of my Stock rom which can be flashed with sp flasher n not i m off for porting thanx for the help anyways
Click to expand...
Click to collapse
Please Help!
After trying to do a partition on my Cherry Mobile Thunder ( a.k.a. MicromaxA91) (2GB of 4GB internal), then I tried to restore factory settings to complete the partition, when It restarted It got stuck in the bootlogo, I got it bricked, Tried to flash my stock rom with TWRP, it failed, Cleared Cache - Failed, Cleared Dalvik Cache Wipe - Failed, tried to Reboot & Restore Factory Settings - still Fails and Prompts " No OS Found, Continue Reboot?" then asks for installing SU, FAILED, Tried to Flash it with ADB - but just pompts "waiting for device" I'm running out of options PLEASE HELP!
capc1989 said:
Please Help!
After trying to do a partition on my Cherry Mobile Thunder ( a.k.a. MicromaxA91) (2GB of 4GB internal), then I tried to restore factory settings to complete the partition, when It restarted It got stuck in the bootlogo, I got it bricked, Tried to flash my stock rom with TWRP, it failed, Cleared Cache - Failed, Cleared Dalvik Cache Wipe - Failed, tried to Reboot & Restore Factory Settings - still Fails and Prompts " No OS Found, Continue Reboot?" then asks for installing SU, FAILED, Tried to Flash it with ADB - but just pompts "waiting for device" I'm running out of options PLEASE HELP!
Click to expand...
Click to collapse
download sp flash tool from HERE
download the stock rom for your phone which can be flashed via sp flash tools
for more info here a link that might help you
http://forum.xda-developers.com/showthread.php?t=1982587
hope that helped pal
\I didn't work it, what should I do??
Hello guys, i'm new on the world of Android and i need a little help. I'm newbie but i learn fast.
I got a new phone with android 4.4.2 China honor 3 (fake), after uninstalling some China app the operation system started to stuck at logo at the start.
So to solve the problem i red that i could restore the old OS using ROM file. The factory where i bought the phone sent me the official ROM file for my phone.
Now i entered on Recovery mode, first i did "wipe data/factory reset", then with ADB i loaded the file .zip "adb sideload update.zip". But how the file is uploaded it says "Installation aborted", without any error.
So now i need your help how can i restore this system... I tried also to buy an SD card 8 gb and upload the file on the SD, but same error.
Thank you for your help!
Bump! Need help guys
SUMMARY:
I unistalled wrongly MIUI (MiHome app) and the phone stopped working correctly.
Phone is a fake honor 3c with MTK 65xx processor.
1 - Phone doesnt load the main theme, after the android logo i see a black page. (i see the top bar where there are wifi, time etc)
2 - The phone is not rooted. (i think)
3 - I can enter in Restore Mode and Factory Mode.
4 - I got the official ROM file. (the factory gave me it)
5 - All file zip (that i try to use in recovery from SD or ADB) give me "Installation aborted" without any error.
6 - I haven't USB DEBUG enabled, and i can't enable it cause i can't load the Operation system.
Stuck on BootLoop
I am currently facing the same Issue i changed the system/framework (of the CHERRY MOBILE JELLY) with the folder of the SamsungS5 system/framework
cause I was thinking that it'll worked too after changing the system/media of my phone
PLEASE HELP
GUYS
Download and flash the stock ROM with SP flash tools....to will solve all the problems...
the best place to go for any rom for china phones is needrom just google it. I had a jiake v8 phone and this was the only place where i was able to find rom for my phone. good luck ....
I face the same prob!
I have a canvas 2.2 a114 which I bought a few days back . I had been using it very smoothly(not rooted and is new). But suddenly it started to reboot and was stuck at the canvas logo. I have the rom file, but it simply says "Installaton aborted when I load the zip file. help plz! Thanx.
guys the best way to do this is to go to youtube. Find how to port rom to mtk devices or china phones there are plenty of videos. It will be much easier for you to do something when you see how someone is doing it and then you do it for yourself. I have a jiake v8 pphone and this is what i did is not that easy to explain much easier to see.
you can try reflashing the stock rom (You May not lose data) or you can install the stock recovery
Fixed
BrendanWk said:
you can try reflashing the stock rom (You May not lose data) or you can install the stock recovery
Click to expand...
Click to collapse
I was fed up at last and i sent it off to micromax center. They said it was a software prob.
---------- Post added at 09:55 AM ---------- Previous post was at 09:47 AM ----------
Guys I finally figured out (I am new to the android family) that i should install a custom recoery inorder to flash roms. I cant flash roms in stock recovery.
I was trying to install a custom rom on my phone . I made a backup of my system using the phones recovery mode. After that i tried installing the rom, but i was told that i can only install the rom with clock work Mode (CWM) installed on my device. So i installed the CWM and went ahead to install the rom. As it turned out the rom was not compartible with my phone so the phone started bool looping (freezing at manufacture logo). Sensing danger i went back to restore my old operating system using the backup i made earleir only to realize that i couldnt install it. That was because i made the made the backup using the recovery mode of the stock rom and as such CWM could use that backup. Now am stuck with a soft bricked phone.
I have a few choices.
1. Get CWM out of the phone and use the recovery mode of the stock rom to restore my system.
2. Install a compartible custom rom on my phone and take off from there.
Can anyone help me out with a way that i can get back to the recovery mode of my stock rom or better still how to remove clock work mode from the phone.
Or alternatively a custom rom that will work with my phone. Am using a mediatek device and after searching for some time i have realised that there are very few roms out there that actually work with mediatek devices. If anyone can suggest one for me, i would be very grateful.
PHONE:
Mediatek 6572
Viwa max running on android 4.2.2
I have tried flashing back the stock recovery using a scater file and Sp flash tools, but it stucks at download section for a long time without starting. If i could get a working custom Rom i would be very happy. Thanks in advance.
Hey bro,
If you want a custom rom for your device i could help you but i would need some files
Dagobert88 said:
I was trying to install a custom rom on my phone . I made a backup of my system using the phones recovery mode. After that i tried installing the rom, but i was told that i can only install the rom with clock work Mode (CWM) installed on my device. So i installed the CWM and went ahead to install the rom. As it turned out the rom was not compartible with my phone so the phone started bool looping (freezing at manufacture logo). Sensing danger i went back to restore my old operating system using the backup i made earleir only to realize that i couldnt install it. That was because i made the made the backup using the recovery mode of the stock rom and as such CWM could use that backup. Now am stuck with a soft bricked phone.
I have a few choices.
1. Get CWM out of the phone and use the recovery mode of the stock rom to restore my system.
2. Install a compartible custom rom on my phone and take off from there.
Can anyone help me out with a way that i can get back to the recovery mode of my stock rom or better still how to remove clock work mode from the phone.
Or alternatively a custom rom that will work with my phone. Am using a mediatek device and after searching for some time i have realised that there are very few roms out there that actually work with mediatek devices. If anyone can suggest one for me, i would be very grateful.
PHONE:
Mediatek 6572
Viwa max running on android 4.2.2
I have tried flashing back the stock recovery using a scater file and Sp flash tools, but it stucks at download section for a long time without starting. If i could get a working custom Rom i would be very happy. Thanks in advance.
Click to expand...
Click to collapse
do you have a stock rom for this device?
Hello!
I had problems with my lenovo s820 network signal so I tried to flash different roms. My phone is CN version, I downloaded firstly older rom, but network coverage was bad again so I flashed kitkat from needrom.
It was working fine but problems with network still persisted so I tried to flash the backup of the rom that came with the phone. It was working before, but now I am stuck in animation logo and phone stays there, no restart no nothing.
I downloaded the rom through SP Flashtools Download (DA DL Checksums).
Little help will be much appreciated. Thank you!
The original rom that came with the phone was 1.0 1427 ( I think). I made a full backup of it through sp flash tools and after that droid tools (like the guide here in the forum). After that I flashed vibe 2.0 latest from needrom (I flashed it through CWM and it worked great). Since I couldn't root it I tried to flash back my older rom (that came with the phone). I did it with 3.13 with DA DL Checksums. After that when it didnt work I tried same with latest flashtools (5.13).
Someone suggested that I make factory/data reset and wipe cache but problem is I have no recovery on the phone (it enters factory mode). WHen I try to flash recovery with the scatter inside the recovery it says error 8038 (also for another roms). Do you think this is the solution of the problem and is it possible that I use the scatter file from my backup of the initial rom (untick all except recovery) and select the recovery image to install?).
I am afraid that I replace something and make things even wors.
Edit: The backup is working since I already did 2 flashes from it before.
Best Wishes!
So I recently tried to unroot my device with flashing official ROM on it. Apparently I used the wrong file because my phone got bricked. I tried using XiaoMiTool by Francesco but it didn't help. I spent a lot of time trying to fix it so ill post what worked for me. I downloaded a lot of ROMS but none of them worked for me there was either flash error or device mismatching and I couldn't find right flash official software anywhere. I downloaded another ADB fixing program which worked, I downloaded Szaki/XiaomiADB fastboot tools which worked perfectly. I simply connected my phone searched for my phone code name (tucana) downloaded ROM from there, wiped all data off and finally flashed OS on my device. I also have a question, are there any android software fixing programs for phone repair companies or something similar?
Have good day and stay healthy,
MX8MC8
id suggest to unbrick with mi flash tool.
I did that always when i was stuck on something, it ofcourse removes your data but saves the device so its still the profit probably... After succesfull rom installation you can flash again.
Also you do this in fastboot mode
When I was stuck in the same way the solution I found was to flash whatever rom then when the phone bootloops, go into recovery, and format data. Afterwards it will boot to startup screen and take forever to load up. Anyway that is my solution, before that I would have to flash stock recovery to boot for the first time then flash a custom recovery back.