Hi,
I have a samsung galaxy young S5360
I installed a new ROM (CREED) and I changed to Hyperion that I used for 2 months, then I wanted to return to CREED 6, so I formatted the cache and I re-installed CREED, and since I can not start my Phone, it gets stuck on the boot screen.
Now I tried to install several ROMs to solve this problem, ICE Cold, CYM, CREED 6 & 7 and Hyperion 6 & 7 . it always gives the same thing, it does not start
Through CWM, I tried to formatting System and Data Cache, Wipe of Dalvik cache, reseting datat and a wipe of cache partition, but I still have the same problem
Also a restor through CWM of the original Samsung ROM does not solve my problem
Help me please
Thx
UP
Hi,
I got this problem before, These follow step worked for me: First, you must wipe anything (Cache, system, davik,..) and reinstall ROM. When I tried to install the same ROM, it's doesn't work. I tried with another ROM, and it's work fine!
Good luck!
Related
Hello all,
Sorry that i have to post this out of the thread as i cannot post on the development thread for this rom.
I have a Samsung S2 which is rooted. With the release of Foxhound Revolver Ocelot, i tried upgrading from the previous release Foxhound sniper wolf. However i had this issues with the upgrade. I then also tried fresh install but too had problems, i tried for more than 10 times so this is roughly what i gotten
Steps for Upgrading
1. Went into recovery mode and Wipe cache and also wipe dalvik cache
2. Installed from External SD card, Aroma launcher ran and choose siyah kernel and Touchwiz S3 and choose custom install where I chose all applications.
3. Installed ok, phone rebooted and then ran the upgrade applications.
Upgrading symptoms.
a. Either it hang at the boot rom page. Force reboot and it run upgrade applications again
b. When it booted up again, i got an error android.phone not responding and i had to reboot since nothing will be displayed (black screen with notification). Tried fixing permissions in the recover mode didnt work.
c. a few times even when i chose Touchwiz launcher during installing, when it managed to boot up it gave me Apex launcher. When this happen it was very buggy (no input)
I then decided to try a fresh install
Steps Fresh install
1. Boot into recovery mode and factory reset , wipe cache and dalvik cache
2. Install rom and choose siyah, touchwiz s3 as default launcher then installed all software from custom installation and reboot to the wizard process
3. Once after wizard mode reboot and wipe cache and dalvik cache
Fresh install issues
a. It hangs at the end of wizard setup and cannot proceed once the setup is done. When the happens wipe cache and dalvik cache doesnt do anything to help. (meaning if the phone fails at setup wizard i have to repeat the install process. but before that i need to wipe the internal storage)
b. Once i wipe the internal storage, installation and going to the setup wizard is good. Touchwiz launcher also works perfectly. However i am faced with another issue. I am using Mybackuppro to back my data and apks. I did attempt to install superuser and make sure in extweats my phone was rooted before continuing..
What happen is that I can restore my sms/mms/contacts/ but if i reboot the sms icon will disappear and then be re-recreated again (funny symptom)
For mybackup pro app data + apks restore, i can restore only apps but not data. If i try that the phone will reboot. I wrote to the mybackuppro developer but they told me it had something to do with the ROM, not their software.
So at the moment i am not able to use the new rom due to the above problems and i am back on sniper wolf rom..i can only use the new rom if i dont want to port my apk data over, something which i am not willing to do n ow. Was wondering if anyone faced the same issues and managed to work through these problems and can offer some advice?
Thank you.
Hello,
i'm having the same issue. I did a fresh install following all the steps, but the rom freezes after i setup my google account. Then, it reboots and the launcher seems to don't work. I tried with touchwhizz as default, nova launcher and even apex launcher. I just can't get this rom working.
Thank you for this awesome rom anyway, sniper wolf is fantastic. But if anyone knows how to solve this please help me.
Sorry for my English.
Hey guys, i have flashed for the first time EVER a custom rom on my S3 Omega V13.1,i was on stock rom BLG8,and i wiped only dalvik cache and cache partition and preloaded cache before install with aroma which cool.
The thing is i've noticed no lags i tried calls,Wifi all the things works perfectly all my apps and games stood the way they were i havent lost anything of my data.iS THIS NORMAL since i flashed this custom rom over a stock one??
Ps: i'm rooted and i'm on SiyahKernel 1.5.2
Problems equal wipe no problems equal wipe not needed .
jje
Thanks man!!
It's normal, cause you didn't wipe data / factory reset in recovery. Although you don't notice any problems wiping data is recommended if you come from another rom than Omega
kirE_2o1o said:
It's normal, cause you didn't wipe data / factory reset in recovery. Although you don't notice any problems wiping data is recommended if you come from another rom than Omega
Click to expand...
Click to collapse
quote, true.
Hi,
I had rooted my samsung galaxy note 2 a year ago. Till then I successfully flashed many ROMs. However recently when I tried to install DN3 (Ditto Note 3) ROM, when it rebooted my phone stuck on the "Samsung Note GT-n7100" logo and could not move further. It was "soft" bricked. I installed Philz recovery through ODIN and able to restore my data. After then I tried 2-3 times to install the same ROM but every time the installation failed in between.
At last I tried to install Phoenix touchwiz ROM but my phone got hanged again in between during installation. It seems there is some problem in my internal memory card which comes in between during installation.
Do I need to format my internal memory? Please let me know the probable causes of this issue.
Just wanted to tell you that all the time I wiped cache + Wipe Cache partition + Wipe Delvik Cache before commencing installation.
your comments would be greatly appreciated!
Hey guys, I decided earlier today to flash the new fusion 2.0.6. rom over my 2.0.4 on my galaxy i9300 (galaxy s3). However, I'm now stuck in bootloop. I've tried everything I know of, wiped dalvik and cache, wiped data, reinstalled the rom.. To no avail
Anyone who can help me?
Can you go into recovery.? If yes and if you have another rom setup on your SD card install it after wiping data.
Sent from a better Galaxy designed for humans!
peejay1704 said:
Hey guys, I decided earlier today to flash the new fusion 2.0.6. rom over my 2.0.4 on my galaxy i9300 (galaxy s3). However, I'm now stuck in bootloop. I've tried everything I know of, wiped dalvik and cache, wiped data, reinstalled the rom.. To no avail
Anyone who can help me?
Click to expand...
Click to collapse
Do a factory reset after and before installation of the ROM
KSKHH said:
Do a factory reset after and before installation of the ROM
Click to expand...
Click to collapse
Don't do it after, you won't have an os to boot into
Sent from my SAMSUNG-SGH-I727
Help ! I Flashed CM12 and it worked good , but after some days i wanted to go back to stock ROM (KitKat 4.4.2) i tried to flash it with Odin3 everything went well .. i wiped data/factory reset , wiped Cache partition , wiped dalvik cache but im still stuck at Samsung logo Help Me pleasee
Bassel Atef said:
Help ! I Flashed CM12 and it worked good , but after some days i wanted to go back to stock ROM (KitKat 4.4.2) i tried to flash it with Odin3 everything went well .. i wiped data/factory reset , wiped Cache partition , wiped dalvik cache but im still stuck at Samsung logo Help Me pleasee
Click to expand...
Click to collapse
don't flash odin stock package over custom rom directly. do wip data/factory reset before flashing odin rom. the first boot will take several minutes so be patient.
don't forget to use last odin version 3.09 or 3.10
I Did and i formated my internal storge before using Odin3 and wiped data / factory reset and wiped Cache Partition and Dalvik Cache before and after using Odin3 but still stuck at Samsung logo help me please
Bassel Atef said:
I Did and i formated my internal storge before using Odin3 and wiped data / factory reset and wiped Cache Partition and Dalvik Cache before and after using Odin3 but still stuck at Samsung logo help me please
Click to expand...
Click to collapse
are you sur that you flash the correct firmeware. i think there is several galaxy s3 neo models. so cheek if it is correct firmeware. or just maybe your firmeware that you flash is damaged.
also you can cheek " nand erase all " option in odin . after flash is complette go to recovery and wip cache an factory reset (compulsory).