I rooted my galaxy s2 the other day and also installed a jelly bean rom called ShoStock 3 on it. I wanted to install a siyah kernal as well so i tried going into clockworkmod recovery but it failed and my phone wouldn't boot. So i fixed it by using download mode and just installing a stock rom but now it says firmware upgrade encoutered an issue because i accidently pulled the usb plug out. Please help it wont work now.
Flash stock again from that screen
Sent from my SGH-I777 using xda premium
Did you use ROM manager?
Sent from my GT-I9100 using Tapatalk 2
Related
It all started yesterday when I was using my GT-P7500 (Rooted and Running Slimbean 4.1.2 ROM), I left it alone and I got some rest. After a few minutes it powered off unexpectedly. The following day I tried to flash the stock 3.1 using Odin3 v1.85, Odin said it passed, I looked at my tablet it was doing something it was supposed to do, it then went to the Samsung Logo (Not the Boot Animation) after that it got stuck in a bootloop, I tried going to stock recovery but it was no use, I couldn't get there. I can attachments if you can't understand what I am saying.
It now takes forever to flash stock rom.
My friend said to use another version of Odin3 so I used v3.04, But now it takes forever to flash, CAny help will be gladly appreciated.
Maybe try to flash a custom recovery and then flash another custom ROM, or flash stock ics ROM
Sent from my GT-P7510 using XDA Premium HD app
Going to try that later
eushaun99 said:
Maybe try to flash a custom recovery and then flash another custom ROM, or flash stock ics ROM
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
I'll try that later, but my tab is taking forever to flash the stock rom, What will happen if I remove it?
Please help!!!!
Odin3 said that it was a failure, now my tab says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I selected emergency firmware recovery but my device doesn't show up. What should I do? Should I just turn it off ,charge it and try to use Odin3 again?:crying::crying::crying::crying::crying:
You just want your tab to boot right? If its not stock does it matter? If not, flash cwm recovery, make a full wipe then flash a custom ROM.
Sent from my GT-P7510 using XDA Premium HD app
eushaun99 said:
You just want your tab to boot right? If its not stock does it matter? If not, flash cwm recovery, make a full wipe then flash a custom ROM.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
I flashed CWM and it was a success, now I tried going to CWM Recovery, but with no avail. It just says
Code:
# MANUAL MODE #
-- Updating Application...
Then after that, it will just say the Samsung Galaxy Tab 10.1 Logo.
If I flash the Stock ICS Rom, will this resolve my problem?
You can try, but I'm not really sure though. I think you need experts help.
Sent from my GT-P7510 using XDA Premium HD app
Can anyone send me a link of the GT-P7500 Stock ICS ROM?
http://www.sammobile.com
Sent from my GT-P7510 using XDA Premium HD app
I have a question though, What version of Odin would that best be to use on.
I'm using v1.87, so far no issues.
http://db.tt/bAK8b9ak
Sent from my GT-P7500 using XDA Premium HD app
Thanks a lot for the help, I can now use again my GT-P7500
Sent from my GT-P7500 using xda app-developers app
Hi to all,
I am newbee to android. After using HTC One V for few months I purchased Samsung Galaxy S2 GT-I9100 from UAE. It was running Jellybean 4.1.2 having Modem XXLS8. On a fine day for the requirement of built in call recording I rooted my phone and managed to install Omega Rom V23.
All went smooth. But next day I realised that Hindi fonts are not properly displaying and I made a big mistake to flash Omega Rom again. This time I stucked in BootLoop . Everything tried. Finally I gave up
I thought flashing back may work so I flashed available stock Gingerbird rom via odin. Now system is back running Stock Gingerbird Android with modem XXKI4. Then I tried to update GB to JB via OTA and Kies, But OTA and kies refused to update software.
Please give me any solution to get back my 4.1.2 version or tell me any idea to get Custom Rom Omega V23. Will it safe to flash Omega V23 4.1.2 directly on current 2.3.6 rom with Philz latest kernels?
Sent from my GT-I9100 using xda app-developers app
Yes you can, you're gonna have to root it tho.
Sent from my GT-I9100 using xda app-developers app
Thanks. Can I root present 2.3.6 Gingerbird and Install Custom Rom Omega v23 4.1.2 directly? Or I have to reinstall stock version 4.1.2 over current 2.3.6 Gingerbird?
Sent from my GT-I9100 using xda app-developers app
Well, the latest CMW version might be better, is not mandatory to go 4.1.2 tho.
Sent from my GT-I9100 using xda app-developers app
gastonw said:
Well, the latest CMW version might be better, is not mandatory to go 4.1.2 tho.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I am not getting it. Please spoon feed me. I will be in debt.
I tried following steps:
I download Omega V23 custom rom and kernel - PhilZ-cwm6-XWLSN-OXX-4.93.6-signed and placed it on SDCard. After going into stock recovery I applied Philz Kernel via Stock Recovery. But getting error in red-
E:Failed to verify whole file signature
E:Signature verification failed
Please give me any solution. I dont have enough previlage to post into Android Development Forum as I am newbee here.
Sent from my GT-I9100 using xda app-developers app
dg081081 said:
Hi to all,
I am newbee to android. After using HTC One V for few months I purchased Samsung Galaxy S2 GT-I9100 from UAE. It was running Jellybean 4.1.2 having Modem XXLS8. On a fine day for the requirement of built in call recording I rooted my phone and managed to install Omega Rom V23.
All went smooth. But next day I realised that Hindi fonts are not properly displaying and I made a big mistake to flash Omega Rom again. This time I stucked in BootLoop . Everything tried. Finally I gave up
I thought flashing back may work so I flashed available stock Gingerbird rom via odin. Now system is back running Stock Gingerbird Android with modem XXKI4. Then I tried to update GB to JB via OTA and Kies, But OTA and kies refused to update software.
Please give me any solution to get back my 4.1.2 version or tell me any idea to get Custom Rom Omega V23. Will it safe to flash Omega V23 4.1.2 directly on current 2.3.6 rom with Philz latest kernels?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I guess you did not make backup of your original ROM... i would recommend that you install ics first before installing jb or custom jb roms... you can get stock ones samfilmware.. when try installing omega ROM again make sure you back your ROM this time so will not start all over again if a problem occurs at any time had same problem bootloop because of the kernel that was installed just did a full wipe fixed it for me and reinstall over again
slimlo said:
I guess you did not make backup of your original ROM... i would recommend that you install ics first before installing jb or custom jb roms... you can get stock ones samfilmware.. when try installing omega ROM again make sure you back your ROM this time so will not start all over again if a problem occurs at any time had same problem bootloop because of the kernel that was installed just did a full wipe fixed it for me and reinstall over again
Click to expand...
Click to collapse
Yepp..You are not getting it. System is running GingerBread with Stock Recovery. I can make backup in CWM recovery only. But right now my problem is that Philz Kernel is not installing. It will give me CWM Recovery and it will root the device. Any solution for above error??
Sent from my GT-I9100 using xda app-developers app
philz does not work on gingerbread ------------->>>> Philz
slimlo said:
philz does not work on gingerbread ------------->>>> Philz
Click to expand...
Click to collapse
Then I have to flash stock 4.1.2 firmware via Odin Am I right?
Sent from my GT-I9100 using xda app-developers app
No Service,After flashing Paranoid Rom.
I checked Baseband version.It shows Unknown.
So i flashed two 4.1.2 Baseband.But both did not work.
Then i flashed leaked JB 4.2.1 version ROM,Now All Service and Data Service working.
After that i rooted the stock rom and again i tried to flash PA rom.
This is also happening for CM rom.
But for other custom stock rom or temasek's UNOFFICIAL cm,it is working well.
Why?
Any solution?
I tried the same rom on another Galaxy S3.
Service was working well.
Mine and another s3 have same Baseband.
I did same steps to install for both headset.
Did you wipe your phone before installing the new rom?
Sent from my GT-I9300 using xda app-developers app
Wiped!
But no luck.
Sent from my GT-I9300 using xda app-developers app
svprm said:
Wiped!
But no luck.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
same problem, reflashed stock from odin and bootlop
panicked then flashed slim bean 7 all fine. Trying reflash
_MirageX_ said:
same problem, reflashed stock from odin and bootlop
panicked then flashed slim bean 7 all fine. Trying reflash
Click to expand...
Click to collapse
I flashed stock rom.i tried to flash but no luck.
I think I need to completely reset my device.
For that do I need pit file?
Sent from my GT-I9300 using xda app-developers app
If you mess with Pit you are likely to have a brick .
Flash stock rom via Odin .
jje
don't mess with PIT, just reflash another working CM rom (like slim) and it should be fine. THen if you want re flash stock, but you should be fine anyway.
Hello guys
My phone is not working at all it boot and the vibrant screen shows up then it power off it self
I was on slimbean 3.1 with gear kernel 1.0.6 i repooted to recovery and the phone went off no recovery
Download mode is still working and i flashed the jfd rom many times with odin and hemidall but the phone won't boot and no recovery like i said it shows the vibrant screen then goes off
When i flash a jellybean kernel with odin then boot the vibrant screen stay without powering off but still no recovery
What could be the problem guys ?
I'm sure i flashed the stock rom correctly many times
Sent from my GT-I9000 using Tapatalk 4
Any idea!!!
Sent from my GT-I9000 using Tapatalk 4
Try this: http://forum.xda-developers.com/showthread.php?p=44794712
And 2 posts down I explain what I did
Flash one of Fishman's 2.2 ROMs, he has Odin versions. After that flash a 2.2 kernel with Odin, see if that fixes it.
Sent from my SGH-T959 using Tapatalk 2
husamco1990 said:
Hello guys
My phone is not working at all it boot and the vibrant screen shows up then it power off it self
I was on slimbean 3.1 with gear kernel 1.0.6 i repooted to recovery and the phone went off no recovery
Download mode is still working and i flashed the jfd rom many times with odin and hemidall but the phone won't boot and no recovery like i said it shows the vibrant screen then goes off
When i flash a jellybean kernel with odin then boot the vibrant screen stay without powering off but still no recovery
What could be the problem guys ?
I'm sure i flashed the stock rom correctly many times
Sent from my GT-I9000 using Tapatalk 4
Click to expand...
Click to collapse
Your sig says that you sent it from a i9000 but you are posting about a vib. And your posting from a phone too?
Sent from my SGH-T959 using xda app-developers app
Well u see that i'm talking about vibrant
My phone is i9000 the vibrant is my brother's
Sent from my GT-I9000 using Tapatalk 4
I had flashed my phone I think to cm7 then to cm9 unofficial by team acid/w semaphore then I was trying to upgrade it to cm 10 with no luck formatted incorrect messed up cache in recovery then tried use odin and that failed maybe due to old semaphore version perhaps.
Anyways it bricked it for minute til I realized odin still detected it when I put it download mode (it didn't show download mode even)
Got it back using a tmobile gingerbread rom. 2.3.6.
Whats the best way to get it back to cm9 or cm10?
Go in recovery mode and flashed cm10 twice, consecutive. There are many great Roms.
Sent from my SGH-T959 using xda app-developers app
T-mobile stopped supporting this phone with Froyo 2.2. If you flashed a T-mobile gingerbread rom then you must have the galaxy s 4g (t959).
Sent from my SGH-T959 using Tapatalk 2