I have a Verizon Droid DNA with me here in India. I am using a local sim which works after changing to global mode. Voice, SMS, Data are working but for some reason i am not able to connect to the local Wifi connections here.
I was able to use them before inputing the new local sim. Moreover, i also did a hard reset afterwards without the local sim card and the wifi started working. But as soon as i use the local sim and change the network to global mode the wifi stops working and then i have to hard reset without the sim card to be able to use WiFI.
please help i am a noob here.
would unlocking bootloader and then rooting the phone help me?
Plz?
I did two custom roms and still couldn't get over it. Someone pls help. will flashing the radio help?
ThRiLLeR 3117 said:
I did two custom roms and still couldn't get over it. Someone pls help. will flashing the radio help?
Click to expand...
Click to collapse
Good to see a fellow Indian . I live in Delhi.
Flash a custom Rom. If ur s-on then don't forget to flash boot.img file via fastboot or flashgui.
If s-off then d/l newt or viper Rom. Profit
iam using viper 1.2. Its brilliant.
Sent from viperDNA using Tapatalk2
Did you try the regional force WiFi setting in venom tweaks?
Sent from my ADR6425LVW using Xparent Red Tapatalk 2
amit_sen said:
Good to see a fellow Indian . I live in Delhi.
Flash a custom Rom. If ur s-on then don't forget to flash boot.img file via fastboot or flashgui.
If s-off then d/l newt or viper Rom. Profit
iam using viper 1.2. Its brilliant.
Sent from viperDNA using Tapatalk2
Click to expand...
Click to collapse
No i didn't try it yet. I'm s-on so ill have to flash the boot.img via fastboot.
Btw, did you use this rom with local sim cards in Delhi on a Verizon HTC Droid DNA?
CharliesTheMan said:
Did you try the regional force WiFi setting in venom tweaks?
Sent from my ADR6425LVW using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
No i didn't. where can i get that?
I did the viper DNA rom still no solution pls tell me how to do the wifi regional force in venom tweaks
ThRiLLeR 3117 said:
No i didn't try it yet. I'm s-on so ill have to flash the boot.img via fastboot.
Btw, did you use this rom with local sim cards in Delhi on a Verizon HTC Droid DNA?
Click to expand...
Click to collapse
Yes, i WAS using the same rom with my vodafone micro-sim in New Delhi. No issues with wifi and 3G.
Currently iam using newts Sens5 rom
Btw, is your wifi connection name is even shown in wifi selection screen. You need to select it to connect to it.
ThRiLLeR 3117 said:
I have a Verizon Droid DNA with me here in India. I am using a local sim which works after changing to global mode. Voice, SMS, Data are working but for some reason i am not able to connect to the local Wifi connections here.
I was able to use them before inputing the new local sim. Moreover, i also did a hard reset afterwards without the local sim card and the wifi started working. But as soon as i use the local sim and change the network to global mode the wifi stops working and then i have to hard reset without the sim card to be able to use WiFI.
please help i am a noob here.
Click to expand...
Click to collapse
i have the same problem mentioned above with my butterfly x920e but i have the the phone with global open cid HTCCN701.
I have been purchased the phone from china and now i am in Pakistan.
But wifi with the chinese sim is working and when i insert any sim of pakistan wifi is automatically disabled and said "Not in Range".
After a full reset without sim card will do wifi oprational.
Any type of help appriciated.
thanks in advance.
---------- Post added at 06:41 PM ---------- Previous post was at 05:47 PM ----------
Hi there i just bought a HTC BUTTERFLY X920e from Yiwu China.
I just started using it and there is no issue with any of these voice,sms,mms,usb internet passthrough But The "wifi" ??????.
The problem i am facing is WiFi was able to connect when i opened the package but when i inserted the simcard.
I am not being able to connect to wifi as it start searching,
and never find out the wifi even the one i connected and used before inserting the sim.
it is displaying the name of the WiFi which i used earlier but that's not in range any more.
I tried on almost 5 diffferent Roms on it and none of them able to wifi oprational with a simcard.
I did the factory reset and it started working without the sim but as soon as i put the simcard again i have the same problem.
Handset Details:
Model: HTC Butterfly X920e(No SD CARD Slot available)
ANDROID VERSION 4.1.1
HTC SENSE version: 4+
Software Number: 1.0.0.X920e
HTC SDK API LEVEL: 4.64
HTC Extension version: HTCEXtention_Sense45_4
KERNEL VERSION: 3.4.10-g095d75c [email protected] #1 SMP PREEMPT
Baseband version: 3A.22.306.10_10.07.1060.04D
BUILD NUMBER: 1.10.1400.1 CL146273 release-keys
Browswer Version: WebKit/534.30
Any Help For This is highly appriciated
Thanks In Advance
SheikhSaqib said:
i have the same problem mentioned above with my butterfly x920e but i have the the phone with global open cid HTCCN701.
I have been purchased the phone from china and now i am in Pakistan.
But wifi with the chinese sim is working and when i insert any sim of pakistan wifi is automatically disabled and said "Not in Range".
After a full reset without sim card will do wifi oprational.
Any type of help appriciated.
thanks in advance.
---------- Post added at 06:41 PM ---------- Previous post was at 05:47 PM ----------
Hi there i just bought a HTC BUTTERFLY X920e from Yiwu China.
I just started using it and there is no issue with any of these voice,sms,mms,usb internet passthrough But The "wifi" ??????.
The problem i am facing is WiFi was able to connect when i opened the package but when i inserted the simcard.
I am not being able to connect to wifi as it start searching,
and never find out the wifi even the one i connected and used before inserting the sim.
it is displaying the name of the WiFi which i used earlier but that's not in range any more.
I tried on almost 5 diffferent Roms on it and none of them able to wifi oprational with a simcard.
I did the factory reset and it started working without the sim but as soon as i put the simcard again i have the same problem.
Handset Details:
Model: HTC Butterfly X920e(No SD CARD Slot available)
ANDROID VERSION 4.1.1
HTC SENSE version: 4+
Software Number: 1.0.0.X920e
HTC SDK API LEVEL: 4.64
HTC Extension version: HTCEXtention_Sense45_4
KERNEL VERSION: 3.4.10-g095d75c [email protected] #1 SMP PREEMPT
Baseband version: 3A.22.306.10_10.07.1060.04D
BUILD NUMBER: 1.10.1400.1 CL146273 release-keys
Browswer Version: WebKit/534.30
Any Help For This is highly appriciated
Thanks In Advance
Click to expand...
Click to collapse
You came to the right place. I can tell you the solution hopefully.
Just install custom Rom "VIPERDNA"
After that go to "Venom tweaks" app > "misc" > Check "Disable HTC SmartSYNC" and "Force enable WIFI N Support"
after that go to settings>call>preferred network and chose LTE/CDMA. Now the local signals will be gone.
Do a reboot of the phone and then connect your wifi. now go back to call and change your preferred network to GSM only. your signals will appear and the wifi will work. But the thing is you don't have to switch off your wifi ever.
If by mistake you do switch off wifi you would have to change your preferred network to LTE/CDMA then do a reboot and connect wifi and afterwards change your preferred network to GSM only.
ThRiLLeR 3117 said:
You came to the right place. I can tell you the solution hopefully.
Just install custom Rom "VIPERDNA"
After that go to "Venom tweaks" app > "misc" > Check "Disable HTC SmartSYNC" and "Force enable WIFI N Support"
after that go to settings>call>preferred network and chose LTE/CDMA. Now the local signals will be gone.
Do a reboot of the phone and then connect your wifi. now go back to call and change your preferred network to GSM only. your signals will appear and the wifi will work. But the thing is you don't have to switch off your wifi ever.
If by mistake you do switch off wifi you would have to change your preferred network to LTE/CDMA then do a reboot and connect wifi and afterwards change your preferred network to GSM only.
Click to expand...
Click to collapse
So if i go out of my wifi range ill have to do the entire process over or will it allow me to reconnect?
mohammadalidugan said:
So if i go out of my wifi range ill have to do the entire process over or will it allow me to reconnect?
Click to expand...
Click to collapse
No only if you disable wifi, wifi is still enabled when you're out of range. That's how it searches for available networks.
Translation: Don't turn off wifi
Help request
CharliesTheMan said:
No only if you disable wifi, wifi is still enabled when you're out of range. That's how it searches for available networks.
Translation: Don't turn off wifi
Click to expand...
Click to collapse
Sir, the VENOM ROM v1.3.1 doesn't work with HTC Butterfly x920e. So there is no way we can use the TwEEKS.
BTW : I have exactly the same problem as another user described. When I put in Chinese SIM Card, all things start working including Wifi and Bluetooth. As soon as I out in any other SIM while visiting other countries, the Wifi and Bluetooth Stop working. Its the permission problem.
We need your expert advice. Please kindly help
I'm experiencing same problem my dna is boot loader unlocked s off rooted n I'm using viper dna rom i tried viper tweaks nothing is helping please help me
Related
plz help me ...after the update everything is working fine but i dnt get the service....i mean the mobile network is unavailable....i cant make any calls...:'(
Did you try to make a complete reboot of your phone?
First of all are you sure you didn't lock you Sim code ? (try to put you Sim Card in another mobile and check that you can make calls.
If you have done this, check if there is an option that turn this servise of.
ics
On the ics beta for the photon you can go to the dialer and type *#*#info#*#*
Click on phone info and scroll to preferred network. Make sure cdma (prl) or GSM is selected if not change. Also note whether it says the radio is on right below that setting.
You might also try to go to airplane mode and back, or wifi and back.
If all else fails return to your stock backup and make sure all is well.
lwjch said:
On the ics beta for the photon you can go to the dialer and type *#*#info#*#*
Click to expand...
Click to collapse
Thanks lwjch for this tips i wasn't knowing and that give acess to many tecnical infos about the phone and wifi connexion
Thnk u every1...i did try it bt i found the problem....its with the IMEI number....so i switched to galaxy note.......thnx again
Sent from my GT-N7000 using XDA
Guys I have a strange problem my razr wont connect to any of the data 2g or 3g only on custom roms like 4.4 Kitkat,Carbon rom etc . I flashed them on slot 1,2 even on stock slot but no luck.. I tried to change Baseband But It always failed So guys help me.....
Edit 11.12.2013:::
I fixed the problem partially..
I fixed the network mess It was bad radio which did this all I flashed ICS radio and now network works fine in all roms (Stock and Custom) BuT bo mobile data on any of them
Edit::::
Now Phone says NO SERVICE on both stock And custom rom but reads sim card contacts & SMS's...
I tried reflashing stock rom But no success. Help me guys...
2g/3g for many of the newer roms has been a problem with both the XT910 and XT912. I know with cyanogenmod 10.2 I'm still not able to connect to 2g/3g although LTE does work. With the newest release of cyanogenmod 11 though I do get 3g and LTE, although some people have been reporting they are not. Seems it's headed in the right direction. Give the latest CM11 build a shot and see if it works for you.
Sent from my Nexus 10 using xda app-developers app
kk but still i have no luck getting 3g on newer versions too.
Is there any APN that saved in your network setting? If it doesn't, set it and save it by hand.
Sorry for my bad English
yup apn's are saved as usual
3n3rg1c said:
yup apn's are saved as usual
Click to expand...
Click to collapse
Uninstall your SIM CARD, and reinstall it again.
Sorry for my bad English
tried Not working Now even more strange thing happend NO SERVICE on Stock also but phone is reading sim card. I can see contacts & sms saved in sim card...
3n3rg1c said:
tried Not working Now even more strange thing happend NO SERVICE on Stock also but phone is reading sim card. I can see contacts & sms saved in sim card...
Click to expand...
Click to collapse
Reboot
Sorry for my bad English
Nothing is helping me dude I also tried flashing stock rom via rsd also.,.
3n3rg1c said:
Nothing is helping me dude I also tried flashing stock rom via rsd also.,.
Click to expand...
Click to collapse
Can you make a call? Did you have paid the SIM card cost?
Sorry for my bad English
Yup my SIM is in contract and working on other phones I can make and receive calls but not on razr I get NO SERVICE message
Open the phone (or dialer, whatever you would like to call it) and Dial *#*#4636#*#* and go to Phone Information and tell us what the preferred network is.
--
Also:
What ROM did you get LTE Only on?
I learned that sometimes ROMs can mess up NV's. The only way of fixing this is to wipe everything and start fresh. And when you are flashing you cannot downgrade, it will fail every time. You may already know what I am telling you but just in case.
And what carrier are you with?
Sent from my XT912 using Tapatalk
In my case in testing I am on GSM auto prl. I tried Flashing JB stock moto BUT it also did not solved my problem. I have erased my cid and checked with different region stock also but no progress
happened with my friend's xt912
turned out sim jacket problem
Hooray I fixed the network mess It was bad radio which did this all I flashed ICS radio and now network works fine in all roms (Stock and Custom) BuT bo mobile data on any of them
3n3rg1c said:
Hooray I fixed the network mess It was bad radio which did this all I flashed ICS radio and now network works fine in all roms (Stock and Custom) BuT bo mobile data on any of them
Click to expand...
Click to collapse
I m having same mobile phone xt910 with idea sim ... already pissed with moto and google for not releasing JB in entire asia &
Now Same problem here but differnence i having this problem a sudden out of nowhere
its just been 13th month for my razr
never rooted or flashed ...
just updated to ICS from stock GB via usb data cable as update was in my country
I purchase a new microSIM & also did a data / factory rest from phone boot option ( u know from tht recovery option comes after rebooting in boot seq mode) to solve the problem but no positive result ... though i found one thing if u go to settings -> more -> mobile networks-> select network ... there you'll find 3 option
1) 2G only
2) 3G only
3) automatic default
well by 1st option works it given me range ... doesn't show no service or emergency calls but 2nd & 3rd option gives me same problem " NO SERVICE " or " EMERGENCY CALL "
sys version -
673.943.328.XT910.AsiaRetail.en.03
firmware version -
GAS_ASIA_USASPDRICSIRD_P021
i m worried if its really sim card jacket problem ...
hey faheemakbar18 how much time & money it took to fix that problem
I dont think its the problem of sim jack. Just go to dialer then *#*#4636*#*# then to phone info then hit menu key select radio band & choose option to automatic.. Hope this helps you.. I had same issue when I chose US BAND
XT910
3n3rg1c said:
I dont think its the problem of sim jack. Just go to dialer then *#*#4636*#*# then to phone info then hit menu key select radio band & choose option to automatic.. Hope this helps you.. I had same issue when I chose US BAND
Click to expand...
Click to collapse
Hi. I have XT910 for more than two years. After brought the phone from Australia to Hong Kong (use Hong Kong SIM card) and back to Australia (replace SIM card with Aus one), I have the same problem as you. Phone can make voice call, but no mobile data connection (3G, 2G).
Want to know if your problem is fixed or not?
I once had an issue like this on my xt910 gsm and I found a way to fix it
Murphyung said:
I once had an issue like this on my xt910 gsm and I found a way to fix it
Click to expand...
Click to collapse
Hi. Can you tell me how to fix the issue: no mobile data, and phone saying "Syncing SIM card contacts"? Thanks.
hi
i have htc one m7 at&t i am using it 6 months ago and everything was great ,yesterday suddenly no network so i made factory default many times with no result also i changed the sim card also with no result
so i unlocked the boot loader and installed ViperOne 6.2.1 also didn’t work ...but i changed the mode to GSM it works !!!:crying:
so i don’t i know what to do i need to 3G OR H+ OR 4G AND I can't
any ideas
thank
catmhm said:
hi
i have htc one m7 at&t i am using it 6 months ago and everything was great ,yesterday suddenly no network so i made factory default many times with no result also i changed the sim card also with no result
so i unlocked the boot loader and installed ViperOne 6.2.1 also didn’t work ...but i changed the mode to GSM it works !!!:crying:
so i don’t i know what to do i need to 3G OR H+ OR 4G AND I can't
any ideas
thank
Click to expand...
Click to collapse
try dialing *#*#4636#*#* enter the gsm testing menu and switch your prefered network type. I use WCDMA preferred and i am able to use 4g/3g and 2g without any issues... i am also on ViperOne
I have one Jio Sim and one Idea sim. If I select cellular data on the Jio sim, both sims have network. However if I select cellular data on Idea sim, jio does not get network. Is this a known problem? I am using the CM13 Snapshot with CM13 firmware. Any help will be appreciated!
Thanks
iG0tB0lts said:
I have one Jio Sim and one Idea sim. If I select cellular data on the Jio sim, both sims have network. However if I select cellular data on Idea sim, jio does not get network. Is this a known problem? I am using the CM13 Snapshot with CM13 firmware. Any help will be appreciated!
Thanks
Click to expand...
Click to collapse
Use Jio Sim in SIM 1 slot, i recommend you to flash modem files from MIUI 8(MM), The radio firmware which comes in Firmware.zip is buggy doesnt works in many devices such as mine. So i have to flash MIUI modems everytime when i flash CM and after that it works like charm.
c_/\/\_k said:
Use Jio Sim in SIM 1 slot, i recommend you to flash modem files from MIUI 8(MM), The radio firmware which comes in Firmware.zip is buggy doesnt works in many devices such as mine. So i have to flash MIUI modems everytime when i flash CM and after that it works like charm.
Click to expand...
Click to collapse
Hi,
Can you please post that miui modem? I am on CM13 19sep Nightly and have flashed cm13 firmware before flashing Cm.. So i can still go to twrp recovery and flash that?
I am having Jio in Sim 1 and Airtel in Sim 2, Jio works fine but Airtel cant connect to network many times.. Network operator is shown in the results but I get error "Cannot connect to network right now, try again later" ... I have to restart to get airtel working (which stops after a while). Apn settings are all default.
Please help
Rohit DK said:
Hi,
Can you please post that miui modem? I am on CM13 19sep Nightly and have flashed cm13 firmware before flashing Cm.. So i can still go to twrp recovery and flash that?
I am having Jio in Sim 1 and Airtel in Sim 2, Jio works fine but Airtel cant connect to network many times.. Network operator is shown in the results but I get error "Cannot connect to network right now, try again later" ... I have to restart to get airtel working (which stops after a while). Apn settings are all default.
Please help
Click to expand...
Click to collapse
Just download beta rom form MIUI, and extract NON-HLOS.bin file, and flash it in fastboot mode. dont restart the device, just switch airplane mode on and off, your network will be back.
This phone supports LTE + LTE standby. I think it means only one sim can use LTE at a time. Correct me if I am wrong.
c_/\/\_k said:
Just download beta rom form MIUI, and extract NON-HLOS.bin file, and flash it in fastboot mode. dont restart the device, just switch airplane mode on and off, your network will be back.
Click to expand...
Click to collapse
Is this file also there in stable 8.0.1.0?
Cod3AlchemisT said:
This phone supports LTE + LTE standby. I think it means only one sim can use LTE at a time. Correct me if I am wrong.
Click to expand...
Click to collapse
his problem is when he turns On the cellular data on 2nd Sim, the network goes away completely on 1st one. if he is not using hardware mod 2sim+sd card, then its modem firmware not behaving.
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
Rohit DK said:
Is this file also there in stable 8.0.1.0?
Click to expand...
Click to collapse
yes its in every build, but download the beta version.
c_/\/\_k said:
yes its in every build, but download the beta version.
Click to expand...
Click to collapse
If possible, can you please upload somewhere and share if its not a huge file. Thanks
Rohit DK said:
If possible, can you please upload somewhere and share if its not a huge file. Thanks
Click to expand...
Click to collapse
download it dude, rom itself is not huge, its only 1.2 GB, if have any other build you can use that too..
c_/\/\_k said:
his problem is when he turns On the cellular data on 2nd Sim, the network goes away completely on 1st one. if he is not using hardware mod 2sim+sd card, then its modem firmware not behaving.
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
yes its in every build, but download the beta version.
Click to expand...
Click to collapse
U cannot use LTE+LTE, Jio being a All time LTE Network as soon u choose data on any sim be it on 1 or 2 the data shifts to LTE for the sim selected for data changing the band for network on the other simcard.
@Rohit DK donnot flash any modem it will not work. Also u might get problem with sim cards not detecting.
Sent from my Redmi Note 3 using Tapatalk
rkkaranrk said:
U cannot use LTE+LTE, Jio being a All time LTE Network as soon u choose data on any sim be it on 1 or 2 the data shifts to LTE for the sim selected for data changing the band for network on the other simcard.
@Rohit DK donnot flash any modem it will not work. Also u might get problem with sim cards not detecting.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
ohh.. i just forgot that JIO is all time LTE network, but flashing the modem files from stock rom will not messed up in anyway. @Rohit DK yes he is right, i literaly forgot that JIo is all based on IP network, so if you have cellular data turned off on JIO, Its still works on IP.. so yes you cannot use jio sim with other sim data on.
c_/\/\_k said:
ohh.. i just forgot that JIO is all time LTE network, but flashing the modem files from stock rom will not messed up in anyway. @Rohit DK yes he is right, i literaly forgot that JIo is all based on IP network, so if you have cellular data turned off on JIO, Its still works on IP.. so yes you cannot use jio sim with other sim data on.
Click to expand...
Click to collapse
My problem is little different
I am getting Jio 4G in Sim 1 and Airtel in Sim 2
Sim 1 is set to LTE
Sim 2 is set at 2G
I get no network in Sim 2, when I search for network I can see airtel but I am not able to connect to it
Rohit DK said:
My problem is little different
I am getting Jio 4G in Sim 1 and Airtel in Sim 2
Sim 1 is set to LTE
Sim 2 is set at 2G
I get no network in Sim 2, when I search for network I can see airtel but I am not able to connect to it
Click to expand...
Click to collapse
let me simplify the language for you to understand maybe it might seems stupid for others, but i will try my best , JIO is all Data network, which means when you are not using its internet. it is connected to the internet, because it works on internet only, all calls, sms, everything works on via data connection only.. if you see 1 bar in network strength, it is connected via Data only, This is what LTE is. right now phones are not capable of connecting data on multiple sims at a time. so by this logic.. Your jio sim is connected to internet by Default(doesnt matter cellular data on or off, it is connected to it in both cases.) so when you manually trigger the cellular data on 2nd sim, JIo sim goes offline, because your phone is configured to connect data only on one SIM. huh..
c_/\/\_k said:
let me simplify the language for you to understand maybe it might seems stupid for others, but i will try my best , JIO is all Data network, which means when you are not using its internet. it is connected to the internet, because it works on internet only, all calls, sms, everything works on via data connection only.. if you see 1 bar in network strength, it is connected via Data only, This is what LTE is. right now phones are not capable of connecting data on multiple sims at a time. so by this logic.. Your jio sim is connected to internet by Default(doesnt matter cellular data on or off, it is connected to it in both cases.) so when you manually trigger the cellular data on 2nd sim, JIo sim goes offline, because your phone is configured to connect data only on one SIM. huh..
Click to expand...
Click to collapse
I do understand but I am not on data on jio or airtel. I am on WiFi all the time.
Rohit DK said:
I do understand but I am not on data on jio or airtel. I am on WiFi all the time.
Click to expand...
Click to collapse
LoL :laugh: God Bless You..! :good: m out.
c_/\/\_k said:
LoL :laugh: God Bless You..! :good: m out.
Click to expand...
Click to collapse
Bro my problem is not jio, its airtel
Same problem
Same problem here. I m using one plus 3
Hi!
My phone is Redmi Note 3 SD, Kate version.
I've been using cm14 for a few months and then decided to flash nitrogen os. After flashing I can't call or receive calls from anybody, since my phone can only connect to LTE, but not 2g or 3g, and my network operator doesn't support VoLTE. I can still use data connection on LTE and send/receive text messages. My phone also connects to my Wifi network. When I select 2g only, 3g only or 2g/3g in settings I get no signal at all. My sim card and carrier (while connected to LTE only) are being detected, I have the correct IMEI. I've tried flashing MIUI through fastboot, flashing CM13, CM14 and flashing different kate firmwares on every rom. Does anybody know what to do?
I solved the issue by installing Network Guru and selected WCDMA in RAT locking menu. Then i selected clear forcings and the problem was gone.
sheo said:
I solved the issue by installing Network Guru and selected WCDMA in RAT locking menu. Then i selected clear forcings and the problem was gone.
Click to expand...
Click to collapse
I have the same exact problem, but on a Kenzo.. I don't have 2g/3g in Nitrogen OS, Xenon HD or Lineage os... but I have them on any miui ROM (official global dev/stable and xiaomi.eu)
But the strange thing is that I've been using Xenon HD and the Nitrogen OS for months without any problem... Before I try your solution, can you confirm your solution applies to the same problem?
TIA,
Gustavo Melo
I didn't have 2g or 3g on MIUI roms too. I recommend you to try it, you've got nothing to lose
You need root though.
---------- Post added at 12:58 AM ---------- Previous post was at 12:41 AM ----------
sheo said:
I didn't have 2g or 3g on MIUI roms too. I recommend you to try it, you've got nothing to lose
You need root though.
Click to expand...
Click to collapse
Well... I don't know what to say... I tried the app still on miui (xiaomi.eu), and did what you described (even if the problem didin't exist on MIUI)... Then installed Nitrogen OS and... I have 2g/3g!... the only difference on this install is that I activated the phone without the SIM...
One of the two: or the Network guru app I used on miui persisted even after installing Nitorigen, or activating without SIM did the trick...
Thank you either way!
Eject your simcard
*#*#4636#*#*
And choose LTE,wcdma,gsm auto
Sent from my Redmi Note 3 using XDA-Developers Legacy app
sheo said:
I solved the issue by installing Network Guru and selected WCDMA in RAT locking menu. Then i selected clear forcings and the problem was gone.
Click to expand...
Click to collapse
Oh my God thank you! I finally have connection on H and 3g.
I am facing same problem on poco x3 nfc from last 4 days , during 1.5 years it was working perfect
please give me the solution and tell me is it completely software problem or it might be hardware problem??