Related
Okay, here is my problem: Every once in a while I will completely lose all signal on my phone. It wont pick up 2G, 4G, nothing. Wifi and bluetooth both seem to work though just fine. I've searched and haven't found anyone with the same issues so I'm wondering if it's just my phone or if nobody has commented on it. I first noticed this about two weeks ago, when my phone refused to find service. I was stuck with the little X next to the signal meter. I figured I was just in an area with poor service and didn't think much of it. An hour later, still, no service. This time I went outside where I know I have good 4G service and nothing for 5 minutes. I enabled airplane mode and disabled it, still nothing. Turned the phone off and back on as a last resort. Still nothing. I ended up finishing the day with wifi calling as that still worked. Sometime later my phone began receiving service again so I thought it was a fluke issue.
Then, just yesterday the same thing happened. This was when I rebooted my phone (which bypasses the fastboot feature) and service was restored right away. I called T-mobile and they said there weren't any network issues in my area and they had never heard of this issue before on the Amaze.
So, this is where I'm asking if anyone has heard of this before. I'm running a stock ROM and it hasn't been rooted. Thanks for any comments!
This might help just a touch. I do live in an area with decent service but my couch and bedroom are deadzones for some odd reason. I bought these signal boosters for 2 bucks figuring "what the hell, I'll give it a shot". No more dead zones, and data went from E to G. Not a miracle worker but for a couple bucks it keeps a signal at least.
http://www.amazon.com/gp/aw/d/B004KMK018/ref=mp_s_a_1?qid=1328921838&sr=8-1
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Wireless Coverage
I have 2 brand new Amaze 4G for a few months now and had no problem with the coverage. I know the coverage is good with full signal bars and have not found any issue with coverage.
Sometimes, different phones have different received signal sensitivity. Also depends on user behavior. If you are always using a handsfree device (cable or BT) and your phone is in a bag, then your coverage is reduced by your action. The best coverage you can ever get is when you have line of sight (unobstructed) to the cell towers.
There are a few issues with your problem:
1-Poor inbuilding coverage
2-Poor coverage in your area
3-Network optimization issue
4-Hardware issue
If you are going from 1 bar to no bar, then most likely you have coverage issue. You lost signal since the level is already very low.
If you are going from full bar to no bar, you might have hardware or network optimization issue. Try your phone is the city or area with known good coverage first. If the behavior persists, then you have phone problem.
I used to manage wireless network for carriers.
same issue
I've had the exact same thing happen to me. Red x, no signal except wifi, in places where signal is not normally an issue. Battery pull doesn't work, return to signal seems arbitrary. Had the same thing happen with my Desire. I have no answers, but you are not alone.
Yup, it happened with my first Amaze. I got it back in January and started playing with it - rooting, custom ROMs, etc. Then later that day, the signal just died on me. I thought I must've screwed something up, so I flashed back to everything stock. No luck. I waited for half a day, then it randomly started working again at night.
You probably noticed tha tI said that happened with my first amaze. That's because after that signal issue, I discovered that my camera stopped working. I returned it to T-Mobile and they sent me another one. This one is working great though.
Well thank you for all the input so far. Id like to say that this isn't my first cell phone and I'm not new to weak or poor signal areas, especially from T-mobile. I was using my phone at work at the time, which has anywhere from no signal to 3 bars depending on where you are. This wasn't one of the cases that I was standing in a dead zone when I checked my phone. I had no signal for several hours, including over 30 minutes of standing outside trying everything I could think of. I have had excellent signal outside in the past, exactly where I was "Hiding". I got the Amaze because I was tired of playing with my old HD2 and having to work around bugs and possibly not receiving calls. So far, I'm not happy that the radio seems to quit responding all together and leaves me without a phone (minus the wifi calling but I'm not always around a hotspot).
I also experienced a dramatic signal loss at home, going from full signal strength to maybe one bar right around the time that I first had issues. I don't know if this is related or if this is a completely different thing.
I am 99% sure this is an error with the phone - probably software related with the radio driver(s) or radio firmware. I guess I will try taking it back to T-mobile and seeing if they could exchange it for a new one. I was just really wanting to avoid that as I finally got my phone setup how I like it. Again, Thank you for the input and let me know if you are having the same problem or if you know of a solution.
I am on my third Amaze and also tried a Galaxy SII X due to the same problem at my home. Even the Samsung did the same thing. In my house and especially in the driveway, the signal varies wildly between -85dbm to as low as -111dbm. The frustrating thing is once it loses the signal, it doesn't seem to reacquire it without a reboot.
I'm with Telus, and they said they will check on it, but I'm not holding my breath. In my immediate area, outside my house, the signal isn't great, but it will usually hang on. I have been to different cities, and all has been well with it. Coming from a rock steady 2G Touch Pro II, I am disappointed as well..
I am new here to this site, but I am having a similar problem with my Amaze. At work I always have a weak 4G signal, but the last few days it has been gone altogether. I have full phone service (4 bars) but no data. The 4G indicates I have signal, but I can't connect to anything on the web. I called HTC and they had me pull my battery and sim card so they could send a "reset signal" to my phone. After my phone came back up I had faster service than ever, but it only lasted a few minutes and went away again. I am thinking this is a phone issue. Oh, the Amaze is my first Android. My only previous smartphone was my Nokia E71x.
I know if I have WiFi calling selected, an x will show up on my signal if i turn WiFi on. I've personally only had slow data in the area I work. I blame it on the fact that it is a busy corporate park with lots of hotels, cuz my signal is fine elsewhere. Try calling tmobile and seeing if they have known tower issues in your area. I know I had that problem with sprint and they sent me a free airave. Maybe tmobile could do something similar if its.a known problem.
Sent from my HTC_Amaze_4G using XDA App
It's most likely a network issue. I get the same thing, it will timeout/refresh the network where it will not get a signal for about 30 seconds a few times per day. I blame the network, since the same thing happened to me with my mt4g
Sent from my Energized HTC Amaze 4G using xda-premium
Jessfox said:
I know if I have WiFi calling selected, an x will show up on my signal if i turn WiFi on. I've personally only had slow data in the area I work. I blame it on the fact that it is a busy corporate park with lots of hotels, cuz my signal is fine elsewhere. Try calling tmobile and seeing if they have known tower issues in your area. I know I had that problem with sprint and they sent me a free airave. Maybe tmobile could do something similar if its.a known problem.
Sent from my HTC_Amaze_4G using XDA App
Click to expand...
Click to collapse
Thank you! This fixed it for me. It was happening only today while I had WiFi enabled, it would turn the mobile radio off completely and the box would be grayed out so I was unable to turn it back on. I had my sim updated today to enable wifi calling so after I read your post, I turned the wifi calling off and the mobile radio signal came back immediately. Strange bug.
eirb said:
Thank you! This fixed it for me. It was happening only today while I had WiFi enabled, it would turn the mobile radio off completely and the box would be grayed out so I was unable to turn it back on. I had my sim updated today to enable wifi calling so after I read your post, I turned the wifi calling off and the mobile radio signal came back immediately. Strange bug.
Click to expand...
Click to collapse
I was told It's by design. It saved battery life by not constantly searching for a mobile network it won't use (due to wifi calling). It's not like you can hand off the call to the local network. I do notice that if i start walking outside, once my wifi hits a low signal it logs back on the network.
djdanska said:
I was told It's by design. It saved battery life by not constantly searching for a mobile network it won't use (due to wifi calling). It's not like you can hand off the call to the local network. I do notice that if i start walking outside, once my wifi hits a low signal it logs back on the network.
Click to expand...
Click to collapse
There is actually an option to specify how the WIFI calling works: either all the time or only when cellular signal is gone. Sounds like you have it set to be on all the time. This means that if you have a good WIFI connection, the cellular radio is shut off and all traffic goes through the WIFI calling app. The other option (which I use) only uses wifi calling when there is no cellular signal.
I have lost cellular signal 3 additional times since my last post. Its not just that I'm in a bad spot and I have no signal for 30 seconds. This goes on for 30 minutes or more - up to several hours. I have found that rebooting the phone fixes it as I believe it completely (as much as possible) removes power from the radio and requires it to be completely re-initiated during the reboot. Simply shutting it off doesn't work as the quickboot is enabled and most likely doesn't perform a complete re-initialization of the radio. My only guess at this point is that there is some kind of possible leftover code from development which never was removed from the radio (this happens more times than not). It could be a timeout or simply causing the radio to hang because of 1. excessive heat generation, 2. excessive power drain, 3. buffer overflow, 4. excessive RF transmit power... In any case, one of those issues could trigger an event in the radio to cause it to simply stop responding.
I am in the process of trying to get T-Mobile to get me a new phone as I am outside of the 30-day window. I have also confirmed it with them that this was not a tower issue.
Thanks
htc amaze 4g signal issue
hay dear i've also the same problem .. i've just bought a new htc amaze 4g having full warranty and signals goes zero everytime when i m in my room ... dnt know whats the problem... is this problem also in the brand new sets..???
Salar khan said:
hay dear i've also the same problem .. i've just bought a new htc amaze 4g having full warranty and signals goes zero everytime when i m in my room ... dnt know whats the problem... is this problem also in the brand new sets..???
Click to expand...
Click to collapse
Hmmmm who is dear? Lol.... Ne ways, well first off, I commend you for digging this thread up rather than just starting a new thread without even looking first :thumbup::thumbup::thumbup: I can't say I've ever seen someone who hasn't even been a member for 1 full day do that. Shoot, I see senior members start new threads or pointless threads without searching first, so good job haha.
Ok, back on topic now, if it's only dropping when you go in your room, then I don't think it's anything wrong with the phone. Not sure who your provider is, but u may be able to call them and have them look up your address and tell you what kind of signal u should get outside your house, and what to expect inside your house. I know t-mobile does at least
sent from my
NRGized amaze
powered by Faux
Has anyone found a solid solution for this? I was able to pick up a amaze for 50 bucks off of craigslist. But I can't get it to connect to mobile net work. A T-Mobile employee told me to root it, but I'm trying not to cause it's not for me.
Sent from my HTC Sensation using xda app-developers app
crewdawg said:
Has anyone found a solid solution for this? I was able to pick up a amaze for 50 bucks off of craigslist. But I can't get it to connect to mobile net work. A T-Mobile employee told me to root it, but I'm trying not to cause it's not for me.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Well your situation is a little different than other peoples in this thread if u can't connect al all. Ok wait so first off, it won't connect to a network at all? AND you only paid 50 bucks for it...? Sounds a little fishy to me bud, why did he say he was selling it...?
Next thing, I don't know why a t-mo rep would tell you to root the phone, rooting has no effect on your signal strength or your ability to connect to a network.
And lastly, is the phone a T-Mobile branded amaze owhat carrierr...? and will it not connect at all, period, or can u make calls just not data...?
sent from my
NRGized amaze
powered by Faux
It's a known bug in our phone
Just wipe cash & dalvic cash
Even more convenient should be with this:
https://play.google.com/store/apps/details?id=ext.recovery.control
jauhien said:
Just wipe cash & dalvic cash
Even more convenient should be with this:
https://play.google.com/store/apps/details?id=ext.recovery.control
Click to expand...
Click to collapse
And that's supposed to do what for your signal?
sent from my
NRGized amaze
powered by Faux
aj_2423 said:
And that's supposed to do what for your signal?
sent from my
NRGized amaze
powered by Faux
Click to expand...
Click to collapse
The phone simply begins connecting normally.. nothing extraordinary though..
---------- Post added at 01:05 PM ---------- Previous post was at 12:27 PM ----------
If the normal connection won't restore after the wiping cash & dalvik cash, you probably have to consider this awesome app:
Moderator Edit
Link removed because you can't post direct links to paid apps
Thank you.
Here is the link to the free version of what actually needed though:
https://play.google.com/store/apps/details?id=net.igio90.androidtweaker.free
Ever since I've transferred to AT&T I've had laggy data issues. I finally rooted/flashed to AOKP, and while trying to address the issues of no APNs appearing or saving and no signal status in the status bar, I've come to find both AT&T and T-Mobile as Available Networks under some network setting. Am I chasing ghosts here, or is there something actually up?
EDIT: So I really need help troubleshooting the issue. I'll logcat, dump, or whatever necessary. I've been in many cities/areas and this problem persists: if I haven't used data or the phone hasn't been backgrounding traffic, it'll take anywhere from 5 to 30 seconds before a connection is made when I try to access an internet-related function on my phone (even though 3G/H is displayed in the status bar). Out of shear frustration (this has been happening since I got the phone, under stock ROMs and now under AOKP), I tried messing with *#*#info#*#*. I changed WCDMA-preferred to WCDMA-only -- no improvement. Oddly, I also tried GSM-only. Well, great improvement! Even though I only have E, there is absolutely no latency in waiting for a connection -- so pages and other data end up loading faster on Edge than 3G !
I have absolutely no idea why my phone takes forever to make a connection. Under 3G, I see only but a few upstream network activity blips (even under full bars) for as much as 30 seconds, before there is any downstream activity (and when it comes, it comes). Can anyone help???
P.S.: I'm going to try using a friend's SIM later for comparison.
joebobjoe said:
Ever since I've transferred to AT&T I've had laggy data issues. I finally rooted/flashed to AOKP, and while trying to address the issues of no APNs appearing or saving and no signal status in the status bar, I've come to find both AT&T and T-Mobile as Available Networks under some network setting. Am I chasing ghosts here, or is there something actually up?
Click to expand...
Click to collapse
Because they both share the 1900MHz band I believe.
Red5 said:
Because they both share the 1900MHz band I believe.
Click to expand...
Click to collapse
I'd like to know if it shows up for anyone else?
joebobjoe said:
I'd like to know if it shows up for anyone else?
Click to expand...
Click to collapse
On AOKP it does for me too. Just ignore it.
Red5 said:
On AOKP it does for me too. Just ignore it.
Click to expand...
Click to collapse
An aside: does your phone stay on 3G and switch to H only under moderate network traffic?
joebobjoe said:
An aside: does your phone stay on 3G and switch to H only under moderate network traffic?
Click to expand...
Click to collapse
The phone displays 3G because thats what it is... then when data is being processed, it shows H because its using the "what AT&T calls 4G but its really HSPA" side of the network. For just standby time with no data, its going to show 3G because HSDPA is traffic, not standby.
Red5 said:
The phone displays 3G because thats what it is... then when data is being processed, it shows H because its using the "what AT&T calls 4G but its really HSPA" side of the network. For just standby time with no data, its going to show 3G because HSDPA is traffic, not standby.
Click to expand...
Click to collapse
Well that's strange. I'm used to phones displaying what network-level they are capable of. So why would it not just display H for HSPA+ when HSPA+ service is available, instead of only displaying under traffic.
I'm going to go ahead an edit this thread to help troubleshoot what I think to be the main issue.
After some trials I see that the network indicator switches back and forth between 3G and H a few tines before making the connection and transmitting data. Hmmm...
Basically, "4G" will eat your battery alive so the phone idles at 3G and jumps to H+ only when you use data. If you were on a "stock" ATT rom it would always read H+, but this is technically false since when its idle the phone sits in 3G. CM9 and AOKP accurately display it which is why you see the switch.
Sent from my SGH-I777 using Tapatalk
I have a HTC Amaze for a phone and the Galaxy S2 is my media player. Sometimes, when I don't feel like carrying around two devices, I put my T-Mobile SIM in the galaxy and use it as my phone. I must say, Edge is not as slow as I remember it being. Maybe speed is contingent on network traffic. If thats the case, instead of using crowded "faux G" networks, I may defer to Edge to save battery life and get good dl/ul rates.
My phone does the same thing. I noticed it sometime ago. When idle 3g. Internet I get H+. This is with both Shostock2 and Phone Bricker. I was curious to know too but just blew it off because it really doesnt make any difference to me as long as Im getting decent speeds. Im not even with ATT anymore. Went with Straight Talk. Which uses ATT towers. Cant beat the price!!
They don't have the correct apns, but that symbol problem is because the phone doesn't use hspa+ passively, only actively. It causes some lag when downloading, but it is faster fit large data. But your problem is due to a supposed imei range with bad modems. Rehash stick, fix the triangle, and return it.
Sent from my GT-I777 using xda premium
My phone - I have ICS - S-OFF Amaze with Energy ROM and I had tried to apply blas0id tweaks.
The problem - In certain areas I don't have phone signal for a few minutes, then suddenly it will show 4 bars for a few minutes. In general the signal seems fickle.
Before ICS upgrade, when I had GB, I always had 4 bars in the same places. I *think* I had good signal with ICS before I did blat0id tweaks, but I am not certain of that. (ICS and the tweaks were within a few days)
My wife's Iphone still has excellent signal in those places. Tmobile Mytouch also has excellent signal in the same places. So something has changed on my amaze and not the cell towers.
What I have done so far -
1. went back to stock ICS by flashing the img file. That did not improve the signal. So then got back to energy
2. Tried another ROM - speedrom. No improvement in signal
3. Tried few apps like fresh network. They did not help
Please help me
What can/should I do? I love my amaze, but if I dont get consistent signal, I will have to replace it
Are there any tweaks that I can try?
How about the custom kernels that have been made for ICS recently, would those help?
Is there a way to increase the power to look for and catch on better signal? I can trade battery life for better signal
Thanks
I have same issue but with WiFi only. I never had GB I hope there is a work around
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
Found a workaround
This was dumb luck, but when I was trying to play around the app opensignal, it wanted me to set 2G for some of its functionality, since that functionality does not work over 3g. So I went to setup and set Network mode to "GSM Only" from "GSM/WCDMA Auto"
And walla! right after that my signal jumped from 1 bar to 4 bars and has stayed there. I went back to WCDMA and signal dropped, so now I change the network mode only when I need 4G. Its a pain, but at least, the signal is good when I need it.
So with that information, can someone help how I can tweak something to get my 4G and also good signal?
Thanks
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
I would like to kno also but let kno what radio u flash from the ruu
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
I checked the version of my software and I think I already have R2
Build number
2.14.531.3_R2 CL373265 release-keys
So not sure if that would change anything
I have always had this problem as well sometimes I have 4 bars of signal then it drops to the X as in no signal,can't make calls or sends texts until it picks up again, happens totally random don't think it has to do anything with tmobile coverage since I live in the center of Miami. Also most of the time I have 2 bars of signal in most places, I believe it's faulty hardware
Sent from my HTC_Amaze_4G using Tapatalk 2
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
Krazex2005 said:
I have always had this problem as well sometimes I have 4 bars of signal then it drops to the X as in no signal,can't make calls or sends texts until it picks up again, happens totally random don't think it has to do anything with tmobile coverage since I live in the center of Miami. Also most of the time I have 2 bars of signal in most places, I believe it's faulty hardware
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
Krazex .. did you try to set your network mode and see if that helps your signal stick around longer and get better signal? That is working well for me.
I've tried setting my network to GSA and my data speed dropped to 2G.
Sent from my HTC_Amaze_4G using xda premium
soundping said:
I've tried setting my network to GSA and my data speed dropped to 2G.
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
yup, that's what this setting is supposed to do, but it increased the quality of my phone signal, that is what I am trying to make better/consistent. Because even after all the bells and whistles, calling someone/receiving the calls is the primary purpose of the phone for me and if that doesn't work, the phone doesn't work for me
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
My amaze won't get 4g in my house whatsoever, only switches to 2g when it feels like it.
Sent from my HTC_Amaze_4G using xda app-developers app
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
A new sim card is a good idea.. so is removing the back cover and cleaning off the contacts with a q-tip and some rubbing alcohol. Taking something and SLIGHTLY bending out each of the gold contacts so they make better contact with the case, making sure there is no debris.
Another thing to look into- there is a TON of hacks for cellphone signal that can be done in build.prop.. playing with those settings is probably a good idea.
The last idea- the signal is actually NOT different. The number of bars it shows you is now just more ACCURATE. You still lose signal in ONLY the exact places you would have before.. but now when your phone would show you as having 1 or 2 bars(on gingerbread) right before you lose all signal, on ICS it shows you as having NO bars because you truly have almost lost the signal. It is VERY accurate, now that I am in an area with bad signal.. I have actually flashed gingerbread again and things did NOT get better, there was just fewer bars that weren't as accurate. But I lost signal in the same spots, and would lost 4g in the same exact spots..
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
RZJZA80 said:
My amaze won't get 4g in my house whatsoever, only switches to 2g when it feels like it.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
Guys, OP here. This question/workaround is not about getting 4G. I am getting 4G just fine. Its about the phone signal (the bars). My amaze does not get good phone signal in some areas and when I set the network mode to GSM only (2G), phone signal strength and stability increases. and now I want to figure out how I can keep the setting to 4G and get a good phone signal
Silentbtdeadly said:
A new sim card is a good idea.. so is removing the back cover and cleaning off the contacts with a q-tip and some rubbing alcohol. Taking something and SLIGHTLY bending out each of the gold contacts so they make better contact with the case, making sure there is no debris.
Another thing to look into- there is a TON of hacks for cellphone signal that can be done in build.prop.. playing with those settings is probably a good idea.
The last idea- the signal is actually NOT different. The number of bars it shows you is now just more ACCURATE. You still lose signal in ONLY the exact places you would have before.. but now when your phone would show you as having 1 or 2 bars(on gingerbread) right before you lose all signal, on ICS it shows you as having NO bars because you truly have almost lost the signal. It is VERY accurate, now that I am in an area with bad signal.. I have actually flashed gingerbread again and things did NOT get better, there was just fewer bars that weren't as accurate. But I lost signal in the same spots, and would lost 4g in the same exact spots..
Click to expand...
Click to collapse
Hi SBD, thanks for coming in. I will look into build.prop (ro.ril properties I think) I will also clean any dust inside the phone, may be that will help. The sim card was new when I got my amaze .. but no harm in trying. So I will ask for a new sim card too.
However, in my case, I have a different experience. This is what I did in a weak signal spot.
Have 4G on. I get 0 signal. Can't make a call
go to 2G at the same spot, I get 2-3 bars. I can make a call
I used opensignal app to check signal strength in both cases. with 4G it showed 0. With 2G it showed 42%
Another test. On my route to drop kids off for their day camp, I was on a call (with 4G on) and dropped the call twice (bad reception areas) while going. I switched it to 2G and while coming back did not drop the call.
Before I found this workaround .. people called me and complained that it directly went to voicemail and I never got the call. (no signal). Since I found the workaround, I haven't heard that from anyone.
So I am convinced that there are some real issues in catching the signal with 4G on that get resolved in "2G only" mode. (may be it has to do with the kind of cell towers we have in our area and nothing to do with the phone)
will update if I find more
tnkrer said:
Hi SBD, thanks for coming in. I will look into build.prop (ro.ril properties I think) I will also clean any dust inside the phone, may be that will help.
However, in my case, I have a different experience. This is what I did in a weak signal spot.
Have 4G on. I get 0 signal. Can't make a call
go to 2G at the same spot, I get 2-3 bars. I can make a call
I used opensignal app to check signal strength in both cases. with 4G it showed 0. With 2G it showed 42%
Another test. On my route to drop kids off for their day camp, I was on a call (with 4G on) and dropped the call twice (bad reception areas) while going. I switched it to 2G and while coming back did not drop the call.
Before I found this workaround .. people called me and complained that it directly went to voicemail and I never got the call. (no signal). Since I found the workaround, I haven't heard that from anyone.
So I am convinced that there are some real issues in catching the signal with 4G on that get resolved in "2G only" mode. (may be it has to do with the kind of cell towers we have in our area and nothing to do with the phone)
will update if I find more
Click to expand...
Click to collapse
Yea, it should be lines that have ro.ril that youd eant to change.. and fortunately one of those that you can add(it isn't included by default) will do exactly what you need, default to 2g signal when 4g is too weak. I actually need the same thing, in Jacksonville we have great signal.. except in this new place I moved into. It drains my battery by trying to stay with 4g.. but I don't have time before work to find it.
Look for a tthread by "master&slave" titled something like "super build.prop tweaks" in the vibrant forums, I THINK they had that line.. otherwise google around for something like "build.prop signal tweak" as if it isisn't in that thread, there's a really good one on some other forum.
Also, I remember there being some app that requires root that allows you to toggle between GSM preferred and 2g only.. it changes it at system level, and I don't think it was on the play store, I think it was on Xda.
But yea, I understand your dilemma, and until we get an alternative radio to flash(which I don't forsee), that is the kind of workarounds you need. If you find a reasonable solution make sure to post as it will help me too!
Sent from my nook color until my broke college students azz can afford the new nexus 7 tablet.. if my post from my nook color helped you, you COULD consider a donation..
Found that thread
http://forum.xda-developers.com/showthread.php?t=1151608
and a few others
http://forum.xda-developers.com/showthread.php?t=1227269
http://androinica.com/2009/12/hack-for-rooted-phones-promises-faster-2g3g-speeds/
http://forum.cyanogenmod.com/topic/9781-buildprop-roril-meanings/
I will try to figure out what these different ril properties control and which one to modify .. will report after my experimentation. I haven't found a good comprehensive explanation of all those properties yet.
Glad I'm not the only one...
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
I have had this problem ever since I got my phone in October (right after launch). Updating to ICS didn't help. i've been planning to root and try another ROM, but so far have been skittish as this is my only phone. hasoon, you say it's the SIM card? I am trying the switch to GSM only to see if it makes a difference. My problem is at home - I have terrible service and I live on a mountain with cell phone towers everywhere. My daughter's AT&T and my old AT&T Nokia E71x had excellent service there. I'll let you know if this helps. Maybe a trip to my local t-Mobile store is in order.
It's not the sim card. I noticed on google a lot of people have this problem with htc phones. It's just a bad radio.
Sent from my HTC_Amaze_4G using xda premium
soundping said:
It's not the sim card. I noticed on google a lot of people have this problem with htc phones. It's just a bad radio.
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
We know. If you wanna help read my post number 16 or try some of the links he posted in 17.. we just need a decent workaround.
Hi I used to have the S3, obviously I have the Note2, I notice that the location of work in nyc area had constant 4G all day. Now it bounces 3G most of the time. So what I did it checked mobile networks from global to LTE..
Is that right or should I leave it to global. When on global it searches for a better signal all the time. Maybe my sim card is bad??
Are there any issues with the radio, baseband, software issues?
Maybe my phone has an issue with the antenna?
I actually in fact live in NYC as well (downtown manhattan to be specific) and in my area, when i start to drive out, I bounce to 3G then eventually to 4G. Its everytime I drive out. Not sure if its the path or something .Doesn't really bother me because I shouldn't be using this beast while driving but just noticed if that helps.
Great to hear from you, neighbor! Yes some odd reason the phone bounces in & out 3G then 4G. Its annoying....But I thought it was just me.
Sent from my Portable SCH-I605
torqtube said:
Great to hear from you, neighbor! Yes some odd reason the phone bounces in & out 3G then 4G. Its annoying....But I thought it was just me.
Click to expand...
Click to collapse
I live in Florida and I was noticing my phone jump from 4g to 3g and back yesterday while at home where I normally have solid 4g.
I found the opposite. Cincinnati Ohio tho but my 4G is rock solid on my note II and was ehhhhh on my GSIII
Sent from my SCH-I605 using xda app-developers app
Glad to hear I'm not alone...I was ready to bring the phone back.
I guess the Samsung phones don't have a great antennas. My partner has a Motorola Bionic, his phone is 4G, all day. Other partner has a Rezound his is 3G but full signal strength.
We have the same signal bars strength wise. But his is 4G mine is 3G.
Sent from my Portable SCH-I605
Outside of Philly and my phone was randomly going into 3G the other night. I think it's network related as I restarted and had 4G back.
imnuts said:
Outside of Philly and my phone was randomly going into 3G the other night. I think it's network related as I restarted and had 4G back.
Click to expand...
Click to collapse
Yes I too had to restart the phone and I would get 4G.
Wouldn't that be an issue with the sim card at that point? I wouldnt think its the phone because the sim is what recognizes Verizon LTE networks?
Cirrect me if I'm wrong, I want to figure this out.
Sent from my Portable SCH-I605
Restarting causes the phone to re-authenticate with the network. Picking up 4G again is likely just luck of the draw. If a local tower (or towers) are having problems, you may keep 4G until there is an issue, then it'll disappear again until you swap towers, toggle airplane mode, or restart the phone. Without talking to VZW though, there is no telling if it is a network issue, or a device issue. Given the number of people that have seen problems recently though, I'm going to go with network issue.
I have 4G issues as well, seems just a day or so after rooting. I haven't seen 4G since; I've restarted several times, pulled sim card, put in airplane mode. I think I need the "get a new sim card" fix. I am rooted but no roms installed; does anyone know should I go full stock before walking into the store and asking for a new card? Or will I be ok since it's only rooted?
I had 4g issues this morning and this evening (in boston); reboots restored but i have no doubt this is verizon crap; my razr periodically had the same issue. At work i had no 4g issues. Drives me batty - I think the only fix is for at&t to record these issues and start using them in advertisements
Xaxxas said:
I have 4G issues as well, seems just a day or so after rooting. I haven't seen 4G since; I've restarted several times, pulled sim card, put in airplane mode. I think I need the "get a new sim card" fix. I am rooted but no roms installed; does anyone know should I go full stock before walking into the store and asking for a new card? Or will I be ok since it's only rooted?
Click to expand...
Click to collapse
Ok..I just replaced my sim from Verizon. They told me there was a bad batch of sims. So they gave me the 2nd batch. Please don't quote me, because that guy was a sales person who tries to sell me everything in the store...lol
I will let everybody know within a day or two.
Sent from my Portable SCH-I605
when i have lte issues I'll throw my phone in airplane mode for a couple seconds, then take it off. works most of the time for me.
sent from my rooted SAMSUNG GALAXY NOTE 2...
I'm no longer having issues, in fact I'm now seeing 4g in areas that were only 3g before. I think it was just network related.
EDIT: See you got it sorted out. Sorry for the bump.
I've noticed over the past few days that I've really been bouncing around a lot. Seems to go through phases.
I'm having serious issues with AT&T LTE in central Mississippi. The LTE network in my college down has been here for at least 8 months, but after ATT did some network upgrades last month, I can no longer access the HSPA network. If I make a call, it kicks me straight down to the EDGE network after a 30+ second delay. Same thing when I receive a call. As a result of the delay, I frequently miss calls and the phone never rings. The issue just started this month. Tried the new APN settings as suggested on other threads, and that just results in EDGE only access. I called AT&T and they forced me to do a full wipe and have them do a network reset. That didn't really fix the issue.
I am on ViperXL 2.0.0 with the latest radio (have tried the older radio too, no fix). Still on HBOOT 1.32 (I think, If not, it's 1.35) I've researched the issue to no avail as to another solution. If I could just use the HSPA network things would be fine, but when there is no LTE I drop to EDGE and the signal strength on the EDGE network here is 2 bars tops when there is 5 bars LTE, so I frequently have no signal when I used to have 5 bars. AT&T, as always in their valiant effort to cover their own butts, says there is no network issue.
Input and solutions welcomed! Thanks guys!
Just tried a sim swap with a friend. He has the s4 active and it makes the step from LTE to HSPA+ with no issues. However, his SIM in my phone still refuses to acknowledge the hspa network. Any suggestions guys? I'm running out of solutions. Problem exists on elegancia and viperxl ROMs.
This wouldn't be an issue except that I live in an area where there is literally at most one bar of edge once it drops the LTE.
UPDATE: After the new sim didn't work, I went ahead and relocked the bootloader and flashed the official RUU. No luck. It seems as though my HSPA radio has actually gone out and will not work.
Weird. I went back home and it works perfectly. But it didn't work where I currently live or anywhere along the 75 miles of travel. Regardless, the replacement HoX+ will be in next week.
Sent from my HTC One X+ using xda app-developers app