Hi guys! i just have rooted my galaxy s2, kernel siyah, and i have a problem with my home button it doesnt respond and if click on it 4 times i think the screen becomes neutral. help me please!!!!
0xx_Linux_ said:
Hi guys! i just have rooted my galaxy s2, kernel siyah, and i have a problem with my home button it doesnt respond and if click on it 4 times i think the screen becomes neutral. help me please!!!!
Click to expand...
Click to collapse
Did u flash a rom/kernel?
If yes try to flash it again.
If it not works, do it again.
If u didn't change anything u can try a factory reset (backup first!),
but it also can mean that ur device has a hardware defect.
Much success
CHEERS
It musn't be hardware problem, because the 4x home button feature is a natural feature on Siyah kernel. I used official AOKP, and the home button didn't responded too, so maybe it will be the problem, but I don't know how to solve the AOKP problem Maybe they will release a patch.
Re: Problem with home button </noob>
Did you run dorimanx before that?
Sent from my gt-9100 powered by dorimanx
You can thank me if i helped you
Re: Problem with home button </noob>
EverByte said:
It musn't be hardware problem, because the 4x home button feature is a natural feature on Siyah kernel. I used official AOKP, and the home button didn't responded too, so maybe it will be the problem, but I don't know how to solve the AOKP problem Maybe they will release a patch.
Click to expand...
Click to collapse
That's why I ask the question I asked, first
CHEERS
Sent from my GT-I9100 with RootBox
Re: Problem with home button </noob>
Ockay first of all, i m running on stock rom, and i'm gonna flash dorimanx soon to see.
Related
When i press *#0*#, proximity value is change but when i call LCD screen wont to turn off.
In settings i thick turn the prox. sensor!
I try few stock roms, but nothing
Is there something like drivers to put with root explorer?
Please help
Hello,
I have exactly the same problem...
When I do a proximity test in *#0*# my proximity sensor turns on (goes red) and works perfectly.
But when I do a call it doesn't work... Not even turns on.
Is there any settings to enable it or is it related to something different?
Tried 3 stock roms but they all had the same results...
Thanks
Have you tried flashing CM7 or if your not on the latest Samsung rom, updating to that
If I have helped you, please feel free to press the thanks button below
danielsf said:
Have you tried flashing CM7 or if your not on the latest Samsung rom, updating to that
If I have helped you, please feel free to press the thanks button below
Click to expand...
Click to collapse
Nope I haven't tried CM7. And I want to stick with the stock rom
But my rom is I think one of the latest official roms. I got it today from here. It is DXKL3.
Armenium said:
Nope I haven't tried CM7. And I want to stick with the stock rom
But my rom is I think one of the latest official roms. I got it today from here. It is DXKL3.
Click to expand...
Click to collapse
my stock rom is xxki3, do you solve your problem Armenium?
danielsf said:
Have you tried flashing CM7 or if your not on the latest Samsung rom, updating to that
If I have helped you, please feel free to press the thanks button below
Click to expand...
Click to collapse
do you have the same problem please help!
I own a M250s which i have transformed it into S2 by installing a firmware from Singapore, It works perfectly but i have a small problem which is that when i long press the touchscreen off button, It is switching off my phone instead of showing a pop-up
I have found out a new problem that the lock screen is not coming up. The slide unlock is not working
Although i have solved the above 2 problems. Is there any fix for low vibration for the phone??
ronak_143 said:
Although i have solved the above 2 problems. Is there any fix for low vibration for the phone??
Click to expand...
Click to collapse
How did u solve the problems, i am also having them, please help
Roguesniper1 said:
How did u solve the problems, i am also having them, please help
Click to expand...
Click to collapse
if u use siyah kernel with Extweak app then u can set the Vibration intensity level
PS- siyah kernel wrks only with GT i9100 (international) model only, so not sure about m250s though
is possible to add the FM Radio in the rom [ROM 4.1.2] JellyBam - 20121030 [AOKP + CM10 + PARANOID] [3 ROM in 1] [SPACEDROID]
thank you very much
Yes, use Spirit FM.
I apologize
but can you explain how to do this
where can i download the app
or how to make the installation of the spirit fm
thank you
Long awaited answer...
Hitxman said:
I apologize
but can you explain how to do this
where can i download the app
or how to make the installation of the spirit fm
thank you
Click to expand...
Click to collapse
Well, first thing to do is to make an account over at google.com.
next, when all is done with creation of your account, you go over at the nearest playstore ( http://play.google.com/store ) and you click on the search button wich should look much like an magnifying glass and you should enter these as your keywords:
"Spirit FM" (without quotes) and as a search result you will be offered with the much wanted app... You should then click on it and when it opens, you click on install and, voila! You've got it!
Sorry for the sarcasm but I had to do it..
No hard feelings! The instructions are quite explanatory so you should use them!
Have fun listening!
Hitxman said:
is possible to add the FM Radio in the rom [ROM 4.1.2] JellyBam - 20121030 [AOKP + CM10 + PARANOID] [3 ROM in 1] [SPACEDROID]
thank you very much
Click to expand...
Click to collapse
Just update to the latest version 20121101, the change logs claim to have FM Radio now :good:
WiFi Problem!!
When I try to switch wifi on, It is stuck on Turning on wifi..
Please help ASAP.!!!!
kewlkeval said:
When I try to switch wifi on, It is stuck on Turning on wifi..
Please help ASAP.!!!!
Click to expand...
Click to collapse
Reboot and it should be fine
Sent from my potato.
if none of the top comments work.
try downloading a flashable zip and use clockworkmod to flash it, or try to get the apk of it.
07112012 - Jellybam
Hi guys, newbie in the house.
Well basically im new to the custom rom world,well i just flashed jellybam 30102012 last week and saw the new update.
Then i flashed the new one(07112012),i cant boot. Stuck in the boot logo stage.
Help me out?
emzeeraj said:
Hi guys, newbie in the house.
Well basically im new to the custom rom world,well i just flashed jellybam 30102012 last week and saw the new update.
Then i flashed the new one(07112012),i cant boot. Stuck in the boot logo stage.
Help me out?
Click to expand...
Click to collapse
wipe data/factory reset through cwm
Hi,
I would like to prompt that starting from 11.18 update there is no longer way to choose profiles in power off menu when lockscreen is active.
I've no sufficient messages to post in JellyBAM official topic. I hope iGio reads here too.
Battery Drain
I have recently installed the Jellybam Rom on my Galaxy S2, everything is working fine but the battery is draining out almost at the rate of 1% per minute. in nearly 2 1/2 - 3 hours the phone is dead. Please help.
Thanks
:crying::crying::crying::crying::crying::crying::crying:
raasesh said:
I have recently installed the Jellybam Rom on my Galaxy S2, everything is working fine but the battery is draining out almost at the rate of 1% per minute. in nearly 2 1/2 - 3 hours the phone is dead. Please help.
Thanks
:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
whats your kernel?
Terens said:
whats your kernel?
Click to expand...
Click to collapse
My Kernel is 3.0.15-CM-g39df795
installing ip
Hi, guys
I'd like to try the new JellyBAM rom, so find the file put on the internal storage, boot in clockworkmode, and started. everything went well , arrived to the finish. the phone not started up, tried again, but the same situation.and over this I just can start the download mode.
I was on stock rom with clock work mode kernel. Maybe I did soemthing wrong , but what ???
Hopefully I can put back a stock rom with ODIN... after I would like to try again this ROM. Any ideea sugestion how to do it?!
cszabo said:
Hi, guys
I'd like to try the new JellyBAM rom, so find the file put on the internal storage, boot in clockworkmode, and started. everything went well , arrived to the finish. the phone not started up, tried again, but the same situation.and over this I just can start the download mode.
I was on stock rom with clock work mode kernel. Maybe I did soemthing wrong , but what ???
Hopefully I can put back a stock rom with ODIN... after I would like to try again this ROM. Any ideea sugestion how to do it?!
Click to expand...
Click to collapse
after installing jelly bam and if goes into bootloop, just pull the battery and insert. the rom then should complete installing. If you read the jellybam thread about 30 pages back, this method was mentioned.
stucked again
Cosmic Blue said:
after installing jelly bam and if goes into bootloop, just pull the battery and insert. the rom then should complete installing. If you read the jellybam thread about 30 pages back, this method was mentioned.
Click to expand...
Click to collapse
thx for yor reply, I read lots of pages, not all,but I think is too late now. So I coud manage to go back to my stock rom, the phone working OK.
I stucked again Now I need to root my phone , I did it a couple of monts ago, and was no problem ,but now that metod not work anymore...
I dont understand why...
cszabo said:
thx for yor reply, I read lots of pages, not all,but I think is too late now. So I coud manage to go back to my stock rom, the phone working OK.
I stucked again Now I need to root my phone , I did it a couple of monts ago, and was no problem ,but now that metod not work anymore...
I dont understand why...
Click to expand...
Click to collapse
just flash siyah 4.1.5 kernal and your phone will be rooted as siyah roots the phone.
Cosmic Blue said:
just flash siyah 4.1.5 kernal and your phone will be rooted as siyah roots the phone.
Click to expand...
Click to collapse
Now looks more better , I already have instlaled jellybam... will see how its working:fingers-crossed:. thank you for your help
Battery Drain
Does anybody suffer from more than average battery drain on JellyBam? It seems to lose battery way faster than ResurrectionRemix. (I have latest versions of both roms + Doriman 7.27) And btw JellyBam also hangs a lot with Doriman 7.28.
Primary Rom: ResurrectionRemix 3.1.2
Secondary Rom: JellyBam 1.2.0
Kernel: Dorimanx 7.xx
Hello!
I've recently installed the fxp cm9 ICS firmware port and kernel on my X10. Now, it turns out several games have a bit of a problem with touchscreen commands. For example, after having installed the mobile Rayman game, the buttons on the main menu seem to respond to my touch at first, but don't actually do anything.
Having looked around for this problem, I ultimately found this quote:
"that problem is with your Kernel. There's a problem with the ICS Kernel 4.1.B.0.431 using touch games. You have to upgrade to a Kernel based on 4.1.B.0.587 or a CyanogenMod Kernel."
I'm not that knowledged in the field of android development, but I'm under the impression that the kernel I installed along with the CM9 x10 port is obviously a CM kernel. All kernels currently available on the X10 dev forums here seem to be based on the fxp cm9 kernel port as well. Thus, my question is: has anyone else encountered this problem, is the problem really relevant to the kernel as stated in that quote, and is there anything specific I need to know or do to fix this problem?
Thanks in advance for your help!
Draycken said:
Hello!
I've recently installed the fxp cm9 ICS firmware port and kernel on my X10. Now, it turns out several games have a bit of a problem with touchscreen commands. For example, after having installed the mobile Rayman game, the buttons on the main menu seem to respond to my touch at first, but don't actually do anything.
Having looked around for this problem, I ultimately found this quote:
"that problem is with your Kernel. There's a problem with the ICS Kernel 4.1.B.0.431 using touch games. You have to upgrade to a Kernel based on 4.1.B.0.587 or a CyanogenMod Kernel."
I'm not that knowledged in the field of android development, but I'm under the impression that the kernel I installed along with the CM9 x10 port is obviously a CM kernel. All kernels currently available on the X10 dev forums here seem to be based on the fxp cm9 kernel port as well. Thus, my question is: has anyone else encountered this problem, is the problem really relevant to the kernel as stated in that quote, and is there anything specific I need to know or do to fix this problem?
Thanks in advance for your help!
Click to expand...
Click to collapse
Same rom with version 5.1 kernel with same problem. The games seem to work when you first load them but doesn't last long until it stops recognizing the touch screen.
dgoby said:
Same rom with version 5.1 kernel with same problem. The games seem to work when you first load them but doesn't last long until it stops recognizing the touch screen.
Click to expand...
Click to collapse
So what you mean, the game doesn't responding anymore even when u touch menu it didnt exit so have to force restart?
Sent from my GT-I8150 using xda app-developers app
Oyongx said:
So what you mean, the game doesn't responding anymore even when u touch menu it didnt exit so have to force restart?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
It it's the same problem I have, here's an example: you get into angry birds, select your level, fire about once or twice with slingshot and then no response from the screen. Back, menu and home buttons work but not the screen.
Yeah, I hadn't tried angry birds yet after having installed the new firmware, but I just gave one of the games a testrun and I can't even get in-game, main menu is completely unresponsive.
But no, there's no freezing or anything, I can just leave the game with my hard buttons, it's only the touchscreen in-game that's being unresponsive.
Not all games either since there's plenty of stuff that still works though.
dgoby said:
It it's the same problem I have, here's an example: you get into angry birds, select your level, fire about once or twice with slingshot and then no response from the screen. Back, menu and home buttons work but not the screen.
Click to expand...
Click to collapse
I see.. that must be kernel problem. Im using cm9 galaxy w but no such issue.. have u tried other kernel?
Sent from my GT-I8150 using xda app-developers app
I'm not sure but I thought the other kernels for ICS for X10 were all based on the FXP CM9 port... Please correct me if I'm mistaken.
Hey, a very noob question, but does flashing just another kernel, and not flashing a whole new firmware, also result in all your data being lost? If not, I could just try a few different kernels out without having to take a new backup.
Draycken said:
I'm not sure but I thought the other kernels for ICS for X10 were all based on the FXP CM9 port... Please correct me if I'm mistaken.
Hey, a very noob question, but does flashing just another kernel, and not flashing a whole new firmware, also result in all your data being lost? If not, I could just try a few different kernels out without having to take a new backup.
Click to expand...
Click to collapse
Nope. But for just in case, do a full backup using cwm recovery. A backup is a must when you do such thing.. As long as you read ics kernel for your x10 not other device maybe everything will be okay. Get what i mean? (Bad english )
Sent from my GT-I8150 using xda app-developers app
Oyongx said:
I see.. that must be kernel problem. Im using cm9 galaxy w but no such issue.. have u tried other kernel?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Not yet but I was looking to try Amin for CM9, unless you have another suggestion for Fera V4 ICS.
Edit: Amin Kernel didn't even allow the phone to boot, next
Draycken said:
I'm not sure but I thought the other kernels for ICS for X10 were all based on the FXP CM9 port... Please correct me if I'm mistaken.
Hey, a very noob question, but does flashing just another kernel, and not flashing a whole new firmware, also result in all your data being lost? If not, I could just try a few different kernels out without having to take a new backup.
Click to expand...
Click to collapse
The kernel has ntn to do with ur apps n data. It is the basic link between ur hardware and ur os. It has the libraries and drivers etc. So ur data won't be lost
Sent from my Xperia X10 using xda app-developers app
---------- Post added at 11:11 AM ---------- Previous post was at 11:08 AM ----------
dgoby said:
Not yet but I was looking to try Amin for CM9, unless you have another suggestion for Fera V4 ICS.
Edit: Amin Kernel didn't even allow the phone to boot, next
Click to expand...
Click to collapse
I'm using feralab v4 ROM with kernel v5.1.. I don't hv ne such issues. I didn't hv these issues on ne cm based kernel for that matter.
Sent from my Xperia X10 using xda app-developers app
Home button, menu button, back button is not work...
How can make this 3button work?
Thank a lot!!!
mhl916 said:
Home button, menu button, back button is not work...
How can make this 3button work?
Thank a lot!!!
Click to expand...
Click to collapse
Can you explain your predicament a little bit more.
Sent from my YP-G1 using Tapatalk 4 Beta
Thank a lot!!
Andr01dye said:
Can you explain your predicament a little bit more.
Sent from my YP-G1 using Tapatalk 4 Beta
Click to expand...
Click to collapse
um...today i flash yp-g70 4.2.2 rom and another 4.1.1 rom, then my player5 (3 hardware key) can not work...
This the rom hv bug? And do u know how to set can be use this 3hardware key...
Ps. if i flash 2.5.6 rom this 3button is work. So i think is the rom hv bug...i want to know hv any solve can set and make it work.
Thank you very much!!
I am so sorry my english is not good.. Hope u can understand what i say..><
did you flash correct kernel if you have international device?
You've to install the default INTL Kernel of your rom or (I recommend you) Kkernel or Sultan Kerbel (INTL versions too). This is assumming you have a non US device. The best way to see if you have or not a US version is checking if you have phisical or capacitive home button. If you have phisical, then it is INTL.
So, you have to download one of this kernels and install it with CWM like you've done with your rom. And you have to flash gapps too
Enviat des del meu YP-G70 utilitzant Tapatalk 4 Beta
oh... thanks all! Let me try now><