[q] htc evo 3d gsm boot loop - HTC EVO 3D

Hello all,
I'm Beginner with htc, i have problem with boot loop, i have done lot of search in the internet and i applied many procedures but i couldn't resolve the problem.
My phone is :
HTC EVO 3D GSM
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
RADIO-11.25.3504.06_M
OpenDSP-v02.6.0.2226.00.02.02
eMMC-boot
Can i have your helps please?
Thank you very much
Best regards,

---

Dear beginner, this is HTC One (2013) forum
Sent from my Desire HD using Tapatalk 2

---

Which rom are you trying to boot? Because you are s-on you need to flash boot.img seperately in fastboot. OR you could use 4EXT recovery with smartflash turned on.

---

EM|NEM said:
Which rom are you trying to boot? Because you are s-on you need to flash boot.img seperately in fastboot. OR you could use 4EXT recovery with smartflash turned on.
Click to expand...
Click to collapse
Thank you very much for your replay,
Sorry for this late response, i was late because i have post my problem in oder thread at this link ( http://forum.xda-developers.com/showthread.php?p=38896827#post38896827 )
i have use all ruu.exe available in this site ( http://androidfiles.org/ruu/?dir=Shooter ) that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
The ruu that i have used from the ()are:
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Rad io_11.77.3504.00U_11.25.3504.06_M_release_264110_s igned.exe
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262714_sig ned.exe
RUU_SHOOTER_U_ICS_35_S_Rogers_WWE_3.28.631.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262715_sig ned.exe
Please, can you send me a link for any ruu or rom works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,

---

aagrou said:
Thank you very much for your replay,
Sorry for this late response, i was late because i have post my problem in oder thread at this link ( http://forum.xda-developers.com/showthread.php?p=38896827#post38896827 )
i have use all ruu.exe available in this site ( http://androidfiles.org/ruu/?dir=Shooter ) that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
The ruu that i have used from the ()are:
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Rad io_11.77.3504.00U_11.25.3504.06_M_release_264110_s igned.exe
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262714_sig ned.exe
RUU_SHOOTER_U_ICS_35_S_Rogers_WWE_3.28.631.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262715_sig ned.exe
Please, can you send me a link for any ruu or rom works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,
Click to expand...
Click to collapse
First of all, since you are using a smarphone, you should try and be a bit smart yourself. From a logical standpoint, those ruu have something different: on one says ASIA, on one EUROPE, and on one Rogers (which I can only assume it is linked to the us version, probably CDMA Evo 3D). If you live and bought the phone from Europe, it seems to me you should try the Europe RUU, right? If from Asia, the Asia one and so forth. Simple logic.
Secondly, if you would have read the vast quantity of threads and tutorials about this, you should have started your phone in hboot (Power button+Volume Down), select Fastboot by pressing the Power button, connect your phone to your pc, and in cmd write "fastboot oem lock". Also preferably a full wipe to be done in recovery. Once those steps were performed, the logically chosen RUU would work without any errors

---

posedatull said:
First of all, since you are using a smarphone, you should try and be a bit smart yourself. From a logical standpoint, those ruu have something different: on one says ASIA, on one EUROPE, and on one Rogers (which I can only assume it is linked to the us version, probably CDMA Evo 3D). If you live and bought the phone from Europe, it seems to me you should try the Europe RUU, right? If from Asia, the Asia one and so forth. Simple logic.
Secondly, if you would have read the vast quantity of threads and tutorials about this, you should have started your phone in hboot (Power button+Volume Down), select Fastboot by pressing the Power button, connect your phone to your pc, and in cmd write "fastboot oem lock". Also preferably a full wipe to be done in recovery. Once those steps were performed, the logically chosen RUU would work without any errors
Click to expand...
Click to collapse
thank you for your replay,
I have done all of that (wip all in recovery, lock my phone, install the ruu.exe). i did that for all the ruu.exe described above but it doesn't work :cryingerror ruu no compatible).
do you know any ruu work on my phone please?
my phone is HTC EVO 3D GSM(described above)
thank you a lot,
best regards

---

What usb cable are you using, and what usb itself? The ruu will not work on usb 1.1 or 3.0, only on usb 2.0 . If you use a pc, plug it in the back, directly in a usb from a mainboard, not in the front usb or through a hub

---

Which carrier was your phone on before? Make sure you use the correct RUU for your phone
EDIT: I see its already been explained

---

EM|NEM said:
Which carrier was your phone on before? Make sure you use the correct RUU for your phone
EDIT: I see its already been explained
Click to expand...
Click to collapse
thank you for your replay.
i don't know which is the first ruu of my phone, because i have got it with a bootloop problem.
do you know the original ruu for my phoene described above?
thank you for you collaborations.
best regards.

---

Boot into bootloader and run this command in cmd: "fastboot getvar cid"
this should give you your CID. might help in figuring out what your original rom was
---------- Post added at 12:32 AM ---------- Previous post was at 12:16 AM ----------
been googling your prob for a while and there is a possibility you had an arabic rom/firmware.
If you have HTC__J15 cid then run this RUU (the ics one): http://forum.xda-developers.com/showthread.php?t=1282840

---

EM|NEM said:
Boot into bootloader and run this command in cmd: "fastboot getvar cid"
this should give you your CID. might help in figuring out what your original rom was
---------- Post added at 12:32 AM ---------- Previous post was at 12:16 AM ----------
been googling your prob for a while and there is a possibility you had an arabic rom/firmware.
If you have HTC__J15 cid then run this RUU (the ics one): http://forum.xda-developers.com/showthread.php?t=1282840
Click to expand...
Click to collapse
thank you. i will test that thid night and i inform you tomorow
Best regards,

---

EM|NEM said:
Boot into bootloader and run this command in cmd: "fastboot getvar cid"
this should give you your CID. might help in figuring out what your original rom was
---------- Post added at 12:32 AM ---------- Previous post was at 12:16 AM ----------
been googling your prob for a while and there is a possibility you had an arabic rom/firmware.
If you have HTC__J15 cid then run this RUU (the ics one): http://forum.xda-developers.com/showthread.php?t=1282840
Click to expand...
Click to collapse
the cid that i got with the command "fastboot getvar cid" is "cid: VODAP304".
Where can i find the the original rom,
thank you a lot,
best regards,

---

aagrou said:
the cid that i got with the command "fastboot getvar cid" is "cid: VODAP304".
Where can i find the the original rom,
thank you a lot,
best regards,
Click to expand...
Click to collapse
The Europe ruu should work for that cid... Nonetheless, I will look a bit more into it later when I get home, to see if I can find any more details

---

You probably need a vodafone ruu but i can't seem to find an ICS one

---

posedatull said:
The Europe ruu should work for that cid... Nonetheless, I will look a bit more into it later when I get home, to see if I can find any more details
Click to expand...
Click to collapse
thank you for your collaboration,
Just for information, i have tested the europe ruu.exe but doesn't work.
Best regards,

---

Be sure to plug the phone in a usb 2.0 in the computer (one in the back, NOT in the front) to be sure it works properly. Ruus have problems on usb 1.1 and even on 3.0. Also try replacing your data cable, it might be faulty.
If you wiped everything in recovery and then oem locked hboot through adb, the europe ruu should have worked. Since it didnt, i must assume the problem is either with the cable used or with the usb port.
Also an idea might be to try and download the ruu again, maybe there was an error during the download

---

Theres something else you can try too. download the zip RUU. place this on your sd card and flash in bootloader

---

EM|NEM said:
Theres something else you can try too. download the zip RUU. place this on your sd card and flash in bootloader
Click to expand...
Click to collapse
thank all for your collaborations,
I have done this but it doesn't work, sorry for all and thank you.
do you know other ruu?
best regards

---

Well if you cant RUU you should try to get a custom rom to boot. First do these steps:
Unlock your bootloader.
Flash 4EXT recovery in fastboot. Then boot into recovery and turn on smartflash in tools menu.
Download Viper3D rom (the latest one) and transfer it to your sdcard.
Boot into recovery
wipe data/factory reset, wipe cache+dalvik
install viper3d rom. It will take a while, around 10 mins on synergy 4EXT alignment.
reboot and hope it boots

---

EM|NEM said:
Well if you cant RUU you should try to get a custom rom to boot. First do these steps:
Unlock your bootloader.
Flash 4EXT recovery in fastboot. Then boot into recovery and turn on smartflash in tools menu.
Download Viper3D rom (the latest one) and transfer it to your sdcard.
Boot into recovery
wipe data/factory reset, wipe cache+dalvik
install viper3d rom. It will take a while, around 10 mins on synergy 4EXT alignment.
reboot and hope it boots
Click to expand...
Click to collapse
Thank you,
I have boot loop after installation,
regards,