I have swapped out my black polycarbonate body for the glossy one and have no kind of problems so far! It can be done.
Sent from my RM-820_nam_att_100 using XDA Windows Phone 7 App
Sorry can't edit from 920.
Where did you get the spare cover(s)? Pictures would be nice
Sent from my Nexus 4
Got it from eBay, from a seller in the UK. Will post pics when I get the chance.
Sent from my RM-820_nam_att_100 using XDA Windows Phone 7 App
IronMan1289 said:
Got it from eBay, from a seller in the UK. Will post pics when I get the chance.
Sent from my RM-820_nam_att_100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Did it come together with the matching sim door?
As long as you get a fully assembled back cover, this is extremely easy to do. There are just two screws at the bottom, remove them and the phone pops right out.
It did not come with the sim tray, but I think thats ok, with the original black tray it still matches the two toned color scheme. Like the black and red for example.
And petard you are misleading others, it is easy to separate the phone yes, but you must be careful when removing the micro-USB ribbon and connector assembly and the wireless charging coil! Other than delicate patience with those parts though, it is pretty straight forward.
Sent from my RM-820_nam_att_100 using XDA Windows Phone 7 App
CYAN!
@IronMan1289: Thanks for your explanation!
I was not shure why some sparepart seller say it's difficult and the phone needs some kind of calibration after the cover swap.
Anyway. Did anybody see a cyan cover as a spare part?
I would definitly risk it to change the color.
Anis108 said:
@IronMan1289: Thanks for your explanation!
I was not shure why some sparepart seller say it's difficult and the phone needs some kind of calibration after the cover swap.
Anyway. Did anybody see a cyan cover as a spare part?
I would definitly risk it to change the color.
Click to expand...
Click to collapse
No problem! But as for the cyan cover, sadly that is an At&t exclusive so for the moment it will be pretty tough for sellers to get their hands on it.
Sent from my RM-820_nam_att_100 using XDA Windows Phone 7 App
I have also done this. Swapped my Cyan for the all elusive grey. We probably bought the covers from the same seller as mine also came from the UK. I did manage to get my hands on the matching sim door as well. I also had to swap the headphone jack, USB ribbon, bottom antenna (the part where the USB ribbon is attached to), and the wireless charging coil like you mentioned from the old housing over to the new one. I also managed to solve the dust getting into the FFC problem with a few dabs of rubber cement where the dust initially enters in. Overall it was simple and looks OEM. Sorry about the bad pics. Used my old G2.
Nissan350 said:
I have also done this. Swapped my Cyan for the all elusive grey. We probably bought the covers from the same seller as mine also came from the UK. I did manage to get my hands on the matching sim door as well. I also had to swap the headphone jack, USB ribbon, bottom antenna (the part where the USB ribbon is attached to), and the wireless charging coil like you mentioned from the old housing over to the new one. I also managed to solve the dust getting into the FFC problem with a few dabs of rubber cement where the dust initially enters in. Overall it was simple and looks OEM. Sorry about the bad pics. Used my old G2.
Click to expand...
Click to collapse
Great work bud! Does look OEM, but did you not like the Cyan? Or did you just want a color change because I have read a lot that many want at&t's exclusive color, and both times I went they were sold out!!! Lol
Anyway, I am definitely digging the red and may consider buying other colors just for a random change every now and again!!!
Sent from my RM-820_nam_att_100 using XDA Windows Phone 7 App
IronMan1289 said:
Great work bud! Does look OEM, but did you not like the Cyan? Or did you just want a color change because I have read a lot that many want at&t's exclusive color, and both times I went they were sold out!!! Lol
Anyway, I am definitely digging the red and may consider buying other colors just for a random change every now and again!!!
Sent from my RM-820_nam_att_100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Thanks! Yours looks awesome too! The red definitely looks great. Reminds me of a Ferrari lol. Well I got rid of the cyan because I dropped it a few times and the left top corner got bruised up pretty good and it annoyed the crap out of me everytime I picked up my phone. I originally was gonna get the yellow housing but I saw the grey and liked it so much more. I also had that same idea, but I don't wanna keep moving the headphone jack, flex cable, and wireless charging coil everytime I switch housings. I suppose I could buy those parts and pre-install them in the other housing so all I'd have to do is plug in the flex cable and drop the phone in, but I looked it up and all those parts including the new housing came up $166. Just can't justify spending that lol. I actually heard that the cyan was available online only through At&t.
cyan cover
Nissan350 said:
Thanks! Yours looks awesome too! The red definitely looks great. Reminds me of a Ferrari lol. Well I got rid of the cyan because I dropped it a few times and the left top corner got bruised up pretty good and it annoyed the crap out of me everytime I picked up my phone. I originally was gonna get the yellow housing but I saw the grey and liked it so much more. I also had that same idea, but I don't wanna keep moving the headphone jack, flex cable, and wireless charging coil everytime I switch housings. I suppose I could buy those parts and pre-install them in the other housing so all I'd have to do is plug in the flex cable and drop the phone in, but I looked it up and all those parts including the new housing came up $166. Just can't justify spending that lol. I actually heard that the cyan was available online only through At&t.
Click to expand...
Click to collapse
if anyone has changed their cyan case and is willing to sell it, contact me, i really want a cyan 920, and mine is black!!!!
IronMan1289 said:
I have swapped out my black polycarbonate body for the glossy one and have no kind of problems so far! It can be done.
Sent from my RM-820_nam_att_100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
What did you search on Ebay? I'd like to swap mine for a black cover (going from white) but all I find on the bay is covers, not the original backs.
thefunkaygibbon said:
What did you search on Ebay? I'd like to swap mine for a black cover (going from white) but all I find on the bay is covers, not the original backs.
Click to expand...
Click to collapse
Looks like they removed them all. At least the ones that come with everything pre-installed already (antennas, camera plate, etc...)
Only one I could find is this one, but it requires a lot more work as you have to transfer everything over from the old housing.
http://www.ebay.com/itm/Genuine-New...093?pt=LH_DefaultDomain_0&hash=item2a2a7522ad
Good luck if you decide to get it!
Nissan350 said:
Looks like they removed them all. At least the ones that come with everything pre-installed already (antennas, camera plate, etc...)
Only one I could find is this one, but it requires a lot more work as you have to transfer everything over from the old housing.
http://www.ebay.com/itm/Genuine-New...093?pt=LH_DefaultDomain_0&hash=item2a2a7522ad
Good luck if you decide to get it!
Click to expand...
Click to collapse
How much did the ones that included everything cost?
Nissan350 said:
Looks like they removed them all. At least the ones that come with everything pre-installed already (antennas, camera plate, etc...)
Only one I could find is this one, but it requires a lot more work as you have to transfer everything over from the old housing.
http://www.ebay.com/itm/Genuine-New...093?pt=LH_DefaultDomain_0&hash=item2a2a7522ad
Good luck if you decide to get it!
Click to expand...
Click to collapse
Not sure, but this might be the housing that contains all the components that Nissan350/IronMan1289 used. It costs around $113 (US) and is shipped from the UK...
You can also try this link. Quite a number of 920 parts available. Not all of them appear the be the best prices, but then again, there aren't many places selling them.
http://www.parts4repair.com/nokia-lumia-920/
jblanken64 said:
You can also try this link. Quite a number of 920 parts available. Not all of them appear the be the best prices, but then again, there aren't many places selling them.
http://www.parts4repair.com/nokia-lumia-920/
Click to expand...
Click to collapse
They are actually pretty good on the cost - £17 over all, including delivery. The problem - Delivery estimate is 10-25 days.
Still, gives me time to pull the thing apart and see how hard this will be
quick question
Nissan350 said:
I have also done this. Swapped my Cyan for the all elusive grey. We probably bought the covers from the same seller as mine also came from the UK. I did manage to get my hands on the matching sim door as well. I also had to swap the headphone jack, USB ribbon, bottom antenna (the part where the USB ribbon is attached to), and the wireless charging coil like you mentioned from the old housing over to the new one. I also managed to solve the dust getting into the FFC problem with a few dabs of rubber cement where the dust initially enters in. Overall it was simple and looks OEM. Sorry about the bad pics. Used my old G2.
Click to expand...
Click to collapse
Did you happen to notice if the grey sim tray was a different size than the cyan tray? I swapped my Att black case for a Euro grey case, but my black sim tray will not fit flush in the grey cover.
Related
Custom Battery Doors?
So we can all agree that the Developer Version of the G1 has a pretty sweet custom battery cover. Anybody know of anywhere making similar products?I expected to find a whole slew of decorated covers in all sorts of colors by now, but I searched Ebay and some online shops and no dice.
Re: Custom Battery Doors/Plastics on Dummy G1s
Have you considered picking up a dummy G1 (like they use in retail displays) cheaply on eBay? They may use the same casing parts - if anyone knows, please tell me?
I'm thinking about getting one of the dummies and respraying the plastics purple, then swapping the plastics with the ones on my G1 (using the instructions in the service manual that showed up on the interwebs).
thefoss said:
So we can all agree that the Developer Version of the G1 has a pretty sweet custom battery cover. Anybody know of anywhere making similar products?I expected to find a whole slew of decorated covers in all sorts of colors by now, but I searched Ebay and some online shops and no dice.
Click to expand...
Click to collapse
I stuck a decal on mine before 'skinning' it. Works
--M
demontefixo said:
I stuck a decal on mine before 'skinning' it. Works
--M
Click to expand...
Click to collapse
Can we see a picture? I almost did the same. Just haven't skinned the back yet.
daveknights said:
Can we see a picture? I almost did the same. Just haven't skinned the back yet.
Click to expand...
Click to collapse
Sure, I'll get around to a picture in a few days.
--M
I painted mine a while back. Sanded it down first, to get rid of the rubberized texture (for the paint to stick better).
http://androidcommunity.com/forums/95009-post58.html
and of course i cant see it without an account, lol
The Great NY said:
and of course i cant see it without an account, lol
Click to expand...
Click to collapse
Sorry man, didn't realize that. I'll repost them here in a sec.
Update: Here ya go man. While I was at it, I did the door on my burner. :-D
WHITE Back Cover?
I just found in ebay an oem white back cover for ,of course, the white g1.
Have any of you guys bought or tried this cover??
I think it would look nice having an all white g1..
Heres the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140296816157&ssPageName=ADME:X:AAQ:US:1123
blufabric said:
I just found in ebay an oem white back cover for ,of course, the white g1.
Have any of you guys bought or tried this cover??
I think it would look nice having an all white g1..
Heres the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140296816157&ssPageName=ADME:X:AAQ:US:1123
Click to expand...
Click to collapse
That battery cover is not white lol. It more like gold/silver/copperish?
I asked the seller and he told me that indeed it was white, but you never know its ebay
I think that may be the UK one.
Apparently when the G1 Pictures first came out the UK white G1 Variety had a white back cover.
I have the white G1 in the U.S. and It has a Silver/Greyish battery cover.
I have had the problem that the "Softtouch" has started to fade and there is a visible copperish color coming through. The inside of the cover is in fact white, so I guess you could clean a grey one off and use it as white.
T-mobile paid (Through account credit) the cost of 15 dollars plus S&H to replace mine from HTC. I ordered the Black one so I would not have this problem again. Now my Phone is white in front, with a grey stripe around it and a black back. Looks Storm Trooperish.
all white (except keyboard)
http://cnn.cn/shop/tmobile-white-housing-p-4199.html
falcon72 said:
all white (except keyboard)
http://cnn.cn/shop/tmobile-white-housing-p-4199.html
Click to expand...
Click to collapse
Is it even possible to replace all of that? If I can find one without the logo in all white I would definately want one, but wouldn't it be too difficult to replace all of it?
djind said:
Is it even possible to replace all of that? If I can find one without the logo in all white I would definately want one, but wouldn't it be too difficult to replace all of it?
Click to expand...
Click to collapse
yup, so possible in fact, that HTC wrote a manual on how to do it
http://forum.xda-developers.com/showthread.php?t=468673
ok, not a whole manual, but it's in there somewhere.
also it looks pretty fkin hard to do, i don't trust myself tbh =/
doesn't
it doesn't really look that difficult. just follow the directions. time consuming yes. i wouldn't do it unless i found one without the t-mobile logo, that would be a waste of time. if i could find one with no logo i'd be so happy. i hate advertising for free
i have a white UK G1 and the back is the same glossy white as the rest of the phone...
the white paint is holding up brilliantly as well and as i said is the same glossyness as the front... so white front, silver trim with a white back.
Brutal-Force said:
Apparently when the G1 Pictures first came out the UK white G1 Variety had a white back cover.
I have the white G1 in the U.S. and It has a Silver/Greyish battery cover.
I have had the problem that the "Softtouch" has started to fade and there is a visible copperish color coming through. The inside of the cover is in fact white, so I guess you could clean a grey one off and use it as white.
T-mobile paid (Through account credit) the cost of 15 dollars plus S&H to replace mine from HTC. I ordered the Black one so I would not have this problem again. Now my Phone is white in front, with a grey stripe around it and a black back. Looks Storm Trooperish.
Click to expand...
Click to collapse
I am having this same problem. I know a guy who has done the same as you but he didn't have to pay for the cover. He went in to T_Mobile and told them the problem and said he wanted a black back piece and they just gave him one. As for myself, I may just do the same.
I like the black back
I just paid up front for it, T-mob credited my account for it.
I like the black back, looks kind of Storm-Trooperish.
While a Glossy white one is most appealing to me, (I consider myself lucky to even have a white G1). I think it will be a while before white battery covers become available OEM, until then the grey back looks like its really dirty around the edges, so the white one gives the phone a more polished look.
External cover need
where can i buy a external cover? not comes with battery.. i ony need external cover (door) because mine broken. need a new one
Brown housing on Ebay
http://cgi.ebay.co.uk/T-Mobile-G1-G...14&_trkparms=72:1301|66:2|65:12|39:1|240:1318
black as well if you search, just bought a brown meself! woop.
how are u planning to take it apart?
i wanna get the white housing when it comes out.. but i;m afraid to take it apart
White G1 Housing, Attempt
I have just purchased a white g1 Housing set for $50, don't call me retarded, money wasn't really an issue for me and I hate the bronze color. Anyway, has anyone actually attempted this and successfully got it functioning afterwards? Any quick replies would be awesome, ty!
do a search for the service manual. Its floating around out there. This gives a step by step on how to take apart and put back together the dream
http://forum.xda-developers.com/showthread.php?t=468673
Let me know how this goes. Curious as to the difficulty level.
What condition is your bronze casing in? lol I have a black, but prefer the bronze.
It's in perfect condition, I only got the phone like 2 weeks ago. No scratches or scuffs, I just prefer a different color. I'm going to give this thing a go lol, unless you're talking about a trade or something.
as long as you follow the service manual perfectly (it's pretty in-depth) then you should have no problems. doesn't look too hard to take apart, just ****ing time consuming
wanna link me to the website where you bought this housing?
i wanted white also.
http://cgi.ebay.com/OEM-FULL-WHITE-...temQQimsxZ20090106?IMSfp=TL090106117008r14624
I'm be interested to know how the transformation goes. I'm not really interested in changin my blakc to any other color, but I'd love to get Telefonica's modded chin installed on my phone http://htcsource.com/index.php/Android/Telefonica-to-launch-HTC-Dream-with-a-facelift.html
nickmgray said:
I'm be interested to know how the transformation goes. I'm not really interested in changin my blakc to any other color, but I'd love to get Telefonica's modded chin installed on my phone http://htcsource.com/index.php/Android/Telefonica-to-launch-HTC-Dream-with-a-facelift.html
Click to expand...
Click to collapse
Yeah, I'd like to try doing that once it comes out, too!
Any updates with the conversion? Like to know if fitment was exact, etc. Really looking into the modified chin though
Anyone found a replacement housing with memory card cover?
I have dropped my phone and will be eventually looking to replace the housing.
But all the adverts on ebay(uk), none of them seem to list the memory card cover. I could use my original, but I kinda fancy a change to white! ;-)
Anyone know where to get this cover?
Thanks,
Really really sorry to bump this.....
Anyone had any luck finding spare G1 memory card covers?
Little surprised no one else is interested in this issue, especially if they fancy changing their housing (for repair/colour change) in the future.
As far as I can see, none of the sellers on ebay include this cover, so don't lose it or wreck it!
I dont think the G1 has enough of a market to mass produce housings, ebay is prob your best bet. You can try contacting HTC and see if they can give you a lead but other than that I think you'll have to look for someone with a bricked phone.
EDIT: Sorry, forgot u were lookin for mem card cover
@Edit: No problem; glad you noticed before I got round to typing reply!
Like I said, every single ebay listing I have seen does not include it.
Just seems a strange thing to for them to miss out, anyone know a reason?
http://www.colorwarepc.com/p-170-tmobile-g1.aspx
lun4tik said:
http://www.colorwarepc.com/p-170-tmobile-g1.aspx
Click to expand...
Click to collapse
yah.. no.. you have to send in your phone to them and they paint it or you can get it from them prepainted....
yeah as ya can tell from the torx thread i bought that ebay one planing to change to white as well and its not as simple as i thought when i started i don't think anyone includes one and the main piece the one that the keyboard is attached to has a metal cover that appears to be glued in place and i could not move it to the one i received with the new housing which is why i decided to go with the 2 tone look. http://stryph.googlepages.com/DSCF2807.JPG Also.. the ebay crap is cheaper than Phuk its allready cracked on me a bit WTF? will post more pics l8r just got in from the fight *wtf man wtf??* (Hope hatton recovers completely and suffered no permanent damage)
VR4Stryph said:
yah.. no.. you have to send in your phone to them and they paint it or you can get it from them prepainted....
yeah as ya can tell from the torx thread i bought that ebay one planing to change to white as well and its not as simple as i thought when i started i don't think anyone includes one and the main piece the one that the keyboard is attached to has a metal cover that appears to be glued in place and i could not move it to the one i received with the new housing which is why i decided to go with the 2 tone look. http://stryph.googlepages.com/DSCF2807.JPG Also.. the ebay crap is cheaper than Phuk its allready cracked on me a bit WTF? will post more pics l8r just got in from the fight *wtf man wtf??* (Hope hatton recovers completely and suffered no permanent damage)
Click to expand...
Click to collapse
Wow I kinda dig that two tone look. how hard was it to switch out? Waiting for more pics...
off topic: yeah man I really didn't think hatton would go down so fast and hard. I really thought it would be a better fight than De La Hoya. Hope he's ok tho!
I have been using my T-Mobile TP2 without protection on it for a while and have dropped it a few times. The screen is still perfect and the lower half (keyboard) has relatively no damage other than a few spots of chipped paint.
But the upper half, around the edges, has took quite a bit of damage. Mostly chipped pieces and dents, partially because of me dropping it and also because the bodyguard I was using previously damaged it! It was one of those crappy snap-on ones. Will never get one again, just bought ghost armor.
Anyway my question is what is the best way to repair the chipped pieces and dents or is that piece sold somewhere so I could replace it? I have no experience replacing things on the phone but I'm sure if there's a tutorial anywhere it wouldn't be too hard for me. Besides I"m not trying to disassemble the entire thing just the upper portion without the screen.
Any help appreciated.
Showtime7 said:
I have been using my T-Mobile TP2 without protection on it for a while and have dropped it a few times. The screen is still perfect and the lower half (keyboard) has relatively no damage other than a few spots of chipped paint.
Deleted stuff...
Any help appreciated.
Click to expand...
Click to collapse
Best option...Ebay>buy broken (software wise) TP2>use if for spare parts
hmmm the only cheap one I could find listed was also worn...
was hoping to profit because i will probably be selling my TP2 soon.
go to ebay and search touch pro 2 houseing case there about 80 bucks they come in balck and red and black and blue the are a little hard to swich over to but i did it and it worked out fine just takes about an hour tools and dremal if and only if ure useing the tp2 t7373
I am trying to locate a replacement front HW button (back key is either cracked or scratched and light shows through) - so, during the lcd repair process, is this button easily replaceable without getting too involved with any other components? Any suggestions or advice on what to do/where to locate this piece of plastic would be met with extreme gratitude!
Get a new housing from eBay.
Just be careful to get one that fits your version.
My phone was stolen at work on Friday, so I managed to scramble and find one at a good price on eBay and it arrived this morning.
While I did ask to see photos, and I expected some scuffs, the photos didn't do the device justice at all, as it's much worse than I expected. In all the time I've owned my devices, I've never dropped my phone once, not once! this thing's a disaster.
So I'll need to get a replacement housing. I've been looking at eBay but couldn't see anything except these ridiculous colored housings for teens and 20-somethings. Where do real adults get the housings from?
This is an excellent outer shell protector, gives better heft holding (IMHO), rubberized black, very lightweight. Just snaps on and off.
Auction ended, but locate seller store. My Tilt2 fit perfectly in the Touch Pro Verizon except camera button needed cutting shell (trivial task).
http://cgi.ebay.com/HTC-TOUCH-PRO-2...D-COVER-CASE-/130412358305?pt=PDA_Accessories
PDADoc said:
My phone was stolen at work on Friday, so I managed to scramble and find one at a good price on eBay and it arrived this morning.
While I did ask to see photos, and I expected some scuffs, the photos didn't do the device justice at all, as it's much worse than I expected. In all the time I've owned my devices, I've never dropped my phone once, not once! this thing's a disaster.
Click to expand...
Click to collapse
You could take it up with eBay for SNAD, probably get a refund depending on the exact wording of the add, but if it was really SNAD should do it.
So I'll need to get a replacement housing. I've been looking at eBay but couldn't see anything except these ridiculous colored housings for teens and 20-somethings. Where do real adults get the housings from?
Click to expand...
Click to collapse
Eh? On ebay? You have everything from the original HTC version to various carrier variations, search more/wider. They're 40-80$ though.
kosmarnik said:
You could take it up with eBay for SNAD, probably get a refund depending on the exact wording of the add, but if it was really SNAD should do it.
Eh? On ebay? You have everything from the original HTC version to various carrier variations, search more/wider. They're 40-80$ though.
Click to expand...
Click to collapse
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
PDADoc said:
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
Click to expand...
Click to collapse
Sorry man, but lern2internet. It's the first 4 hits on ebay. Just enter "htc touch pro 2 housing" and check 'worldwide'.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
eBay dispute process is tedious an long winded, but will lean towards the buyer in almost all cases. You just have to be patient.
PDADoc said:
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
Always pay with your credit card through PayPal. Ebay and PayPal suck at disputes; your credit card company is your fall-back and your best protection as well.
You can get OEM housings for $50-60:
http://www.parts4repair.com/products/Housing-for-HTC-T7373.html
Looks like it's kinda tricky to replace the housing (if you're going OEM)....
http://pocketnow.com/hardware-1/htc-touch-pro2-disassembly-assembly-training-videos
PDADoc said:
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
On ebay? i suggest amazon.
rete said:
Always pay with your credit card through PayPal. Ebay and PayPal suck at disputes; your credit card company is your fall-back and your best protection as well.
You can get OEM housings for $50-60:
http://www.parts4repair.com/products/Housing-for-HTC-T7373.html
Looks like it's kinda tricky to replace the housing (if you're going OEM)....
http://pocketnow.com/hardware-1/htc-touch-pro2-disassembly-assembly-training-videos
Click to expand...
Click to collapse
Great, thanks for the tip! I'll have to look into this closer, as I think if I go with the Touch Pro 2 OEM housing, there'll be a hole for the front-facing camera.
Maybe I'll just deal with it for now and keep my eyes open for an AT&T Tilt 2 housing somewhere. If it wasn't so beat up, I'd try a warranty exchange through AT&T; I was able to do it when I purchased a used BlackBerry Bold 9700 with no problem.
Can use HTC TP2 housing on T-Mobile TP2?
PDADoc said:
Great, thanks for the tip! I'll have to look into this closer, as I think if I go with the Touch Pro 2 OEM housing, there'll be a hole for the front-facing camera.
Maybe I'll just deal with it for now and keep my eyes open for an AT&T Tilt 2 housing somewhere. If it wasn't so beat up, I'd try a warranty exchange through AT&T; I was able to do it when I purchased a used BlackBerry Bold 9700 with no problem.
Click to expand...
Click to collapse
Hi there!
I've a T-Mobile Touch Pro 2 that is quite beat up too & I want to replace the whole housing.
Problem is where I'm living right now, the T-Mobile housing costs double of the standard Touch Pro 2 housing.
Is it possible to fit the motherboard, flex cable & LCD panel of the T-Mobile onto a HTC Touch Pro 2 casing with the power button?
I would need the touch screen & call/navigation buttons as well.
Please advise me if you know anything about this.
Thanks!
Konker
I'm afraid I don't know myself, but if you keep searching, I'm sure there is someone who's done it and knows for sure.
Take a look at this thread: http://forum.xda-developers.com/showthread.php?p=8580850#post8580850
So I wasn't too big of a fan of the Midnight Blue color, but it was the only color available from T-Mobile, so I went with it. I purchased a white back cover from ebay and this is how I swapped it out.
Link to back purchased:
http://www.ebay.com/itm/261685948756?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
First is the replacement cover itself. It comes with adhesive already applied and a blue cover to be removed before sticking on.
To take the cover off the Nexus 6 I used a dull razor blade, as it was the only thing I could find that wold fit between the back cover and the metal housing. I stuck it in the bottom corner because I thought it would make it easier to peel up. I also put a piece of electrical tape at the point where the razor would touch the metal housing to avoid chipping the metal.
WARNING!!!! There is a ribbon next to the power and volume buttons that will pull up with the cover when removing make sure to use your finger to hold it down as you pull on the cover. Take your time.
Peel off protective cover of new back and stick on . Pretty simple.
Finished.
I do like it wayyyy better than the midnight blue back color. The blue was too boring for me and I am actually liking the 3 tone with white,black and blue. However, once they release the housing I will replace with the housing shipped on the Cloud White model to get rid of the blue. Also remember cloud white is slightly off white so don't a bright white. And thanks to ifixit for the instructions for removing back cover.
And FYI, the white cover has the same texture as the blue. It is also a fingerprint magnet as well, but less visible in most lighting due to the color.
Nice, thanks for sharing. Pics r a little small but still helpful.
Sent from my Nexus 6 using Tapatalk
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
natezire71 said:
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
Click to expand...
Click to collapse
It feels just like factory. I'm honestly not sure if it is factory but it is identical to the stock and a perfect fit.
bigmike2424 said:
It feels just like factory. I'm honestly not sure if it is factory but it is identical to the stock and a perfect fit.
Click to expand...
Click to collapse
Could I get a link to the page you ordered from? I want to make sure it has the adhesive installed.
natezire71 said:
Could I get a link to the page you ordered from? I want to make sure it has the adhesive installed.
Click to expand...
Click to collapse
http://www.ebay.com/itm/261685948756?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Nice, thanks for the write up, especially the part about the ribbon cable. I ordered a new one on Dec 1 but the tracking hasn't updated since the 4th so who knows when I'll get it.
Edit - Looks like it showed up in Chicago today. Maybe tomorrow I'll have it.
---------- Post added at 08:28 AM ---------- Previous post was at 08:26 AM ----------
natezire71 said:
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
Click to expand...
Click to collapse
This is why I got a new one. My new Nexus 6 from Sprint came with a few of those scuffs on the back almost like they used the phone as a hockey puck and slid it across the floor before packaging it or something. Nothing I have done has created anything like those scuffs so I am not sure what these phones went through during assembly. I knew the back covers would be cheap since there isn't even an NFC tag or anything attached to them.
Is it possible to still stick the old back on the phone after removing it or will the adhesive not be strong enough to stick? I was thinking about getting a white for fun to see if I like it.
Pilz said:
Is it possible to still stick the old back on the phone after removing it or will the adhesive not be strong enough to stick? I was thinking about getting a white for fun to see if I like it.
Click to expand...
Click to collapse
The adhesive seems strong enough on the original cover to reapply. I even put the protective layer that cane with the new back on the old one.
bigmike2424 said:
The adhesive seems strong enough on the original cover to reapply. I even put the protective layer that cane with the new back on the old one.
Click to expand...
Click to collapse
That's good news, it looks like I'm ordering one, I may get a blue one and 'texturize' it and then install it.
Pilz said:
That's good news, it looks like I'm ordering one, I may get a blue one and 'texturize' it and then install it.
Click to expand...
Click to collapse
i was thinking of picking one up, to see what/how i can paint it black (and look good) while adding texture. Let me know if you have any ideas on how you are going to do this!
Thanks. That's good to know because I'm sure I will be replacing it at some point (I have no case and the back cover will surely get scratched up at the minimal contact point)
PaisanNYC said:
i was thinking of picking one up, to see what/how i can paint it black (and look good) while adding texture. Let me know if you have any ideas on how you are going to do this!
Click to expand...
Click to collapse
There's a rubber paint that I saw at home depot for random stuff like painting your rims and dumb things and its made by krylon if I recall correctly. There is also a sand textured paint for outdoor decor which looked interesting. I'll have to see which one I want before I buy the back.
Pilz said:
There's a rubber paint that I saw at home depot for random stuff like painting your rims and dumb things and its made by krylon if I recall correctly. There is also a sand textured paint for outdoor decor which looked interesting. I'll have to see which one I want before I buy the back.
Click to expand...
Click to collapse
PlastiDip
Pliind said:
PlastiDip
Click to expand...
Click to collapse
Someone tried that with the dbrand skin and it started to flake after a couple of days.
Pliind said:
PlastiDip
Click to expand...
Click to collapse
I have to agree, PlastiDip doesn't work well for something being handled as much as a phone, even if you sandpaper the item for better adhesion before painting
How long did the back cover take to arrive at your doorstep? It'd be nice to do the conversion before I head off for vacation in a week or so from now.
radeonboy said:
How long did the back cover take to arrive at your doorstep? It'd be nice to do the conversion before I head off for vacation in a week or so from now.
Click to expand...
Click to collapse
Shipping from NJ only took 3 days to get to me in Texas.
Thanks for this. Just ordered one!
does anyone know if replacing the white back with one of these blue ones will void any kind of warranty?
Hi all, I got a good deal on a used z3v(came from nexus 6 just wasn't feeling it much) I love this phone but I have a question the person I bought it from had removed the micro SD and USB flap that makes the phone waterproof (hence the reason I got such a good deal ). My question is where do I buy a replacement I see a replacement flap for the normal z3 on ebay, will it fit the z3v? Or with this phone being so similar to the z2 would i need to order one for that one?
Whoa whoa, that's an awfully terrible thing someone would do to this phone. Removing the flaps is like saying "please let me drive my car without tires and see how this will work".
You would have to get Sony to repair your phone for you because the phone is sealed tight, preventing you from physically modifying it of the sorts.
GigaSPX said:
Whoa whoa, that's an awfully terrible thing someone would do to this phone. Removing the flaps is like saying "please let me drive my car without tires and see how this will work".
You would have to get Sony to repair your phone for you because the phone is sealed tight, preventing you from physically modifying it of the sorts.
Click to expand...
Click to collapse
So the replacement z2 or z3 flaps I see on ebay won't work?
Gcforreal01 said:
So the replacement z2 or z3 flaps I see on ebay won't work?
Click to expand...
Click to collapse
If they are the Z3V Variant then yes those will work. Any other Z2 or Z3 flaps that are not Verizon will not work.
That sucks since even cases for the Verizon variation is hard to find, oh well still a nice phone and I paid next to nothing for it so no worries as even when I had my s5 I never dunked it in water anyways. Thanks for the advice
Gcforreal01 said:
That sucks since even cases for the Verizon variation is hard to find, oh well still a nice phone and I paid next to nothing for it so no worries as even when I had my s5 I never dunked it in water anyways. Thanks for the advice
Click to expand...
Click to collapse
I would be real careful with it though. Anything intruding into your phone can easily ruin it. It looks to me there's next to no protection for anything to enter without the flap. You should get a case that at least covers the exposed areas somehow.
How is that different from any other phone without protective covers on the USB? Not being a smart ass just asking. I have a otterbox defender but annoyingly it doesn't cover the flap area
Gcforreal01 said:
How is that different from any other phone without protective covers on the USB? Not being a smart ass just asking. I have a otterbox defender but annoyingly it doesn't cover the flap area
Click to expand...
Click to collapse
If you look through the side where the micro usb port is, you can see the holes to see the internal where the display lights up. I feel as though dust can easily ruin the quality of the display or ruin the camera lens in the phone from taking great quality pictures.
I got one on ebay. Should be here tomorrow. Shipping was slow but it said it's the original part. Sony would not send me one. They offered to fix my phone for a fee if I mailed them the phone (I didn't get that far so I don't know how much). Here's the link.... Maybe they still sell them. Contact the seller, see what they say... http://pages.ebay.com/link/?nav=item.view&id=131457513807&alt=web
Sent from my D6708 using XDA Free mobile app
Well let us know how the installation goes and how the fit of the replacement is
hexto said:
I got one on ebay. Should be here tomorrow. Shipping was slow but it said it's the original part. Sony would not send me one. They offered to fix my phone for a fee if I mailed them the phone (I didn't get that far so I don't know how much). Here's the link.... Maybe they still sell them. Contact the seller, see what they say... http://pages.ebay.com/link/?nav=item.view&id=131457513807&alt=web
Sent from my D6708 using XDA Free mobile app
Click to expand...
Click to collapse
Depending on how it goes and how difficult it is, if you want to of course..... make a small guide on how to put on those flaps. That might be helpful for some users in the future. Just throwing out an idea.
Bruce Lee said:
Depending on how it goes and how difficult it is, if you want to of course..... make a small guide on how to put on those flaps. That might be helpful for some users in the future. Just throwing out an idea.
Click to expand...
Click to collapse
That's a great suggestion. I don't mind at all and would like to share. From what I can tell in my research, the port is designed like the Z1 and should not be difficult to install.
I just looked at the USPS tracking and my package arrived in Brooklyn NY tonight at 9:58pm. I'm in CT but doubt I'll get delivery tomorrow so it looks like Monday.
I'll be sure to post details. I'm glad to help others. I've sure have been helped more times than I care to admit by others. Besides, I can use some "Thanks" on my profile ?
Sent from my D6708 using XDA Free mobile app
I just noticed mine snapped off some time today. Can't find it anywhere. Really hope this works out for you and that there will be more stock...
Stormwing said:
I just noticed mine snapped off some time today. Can't find it anywhere. Really hope this works out for you and that there will be more stock...
Click to expand...
Click to collapse
Me too. Hope to get it tomorrow. The USPS tracking hasn't been updated since Friday but it was close. Fingers crossed
Sent from my D6708 using XDA Free mobile app
Quick question: anyone know if there's a difference in port cover color between the white and black Z3Vs?
Stormwing said:
Quick question: anyone know if there's a difference in port cover color between the white and black Z3Vs?
Click to expand...
Click to collapse
I doubt it. It's just the aluminum strip that's on the outside that show. Inside isn't different at all.
GigaSPX said:
I doubt it. It's just the aluminum strip that's on the outside that show. Inside isn't different at all.
Click to expand...
Click to collapse
Actually, upon further inspection, I'm positive there's a difference. I found a couple European sites offering Z3V parts, expressly labeled as Black or Silver. Before anyone gets too excited though, none of them have the USB covers in stock.
Display Doktor/World of Mobiles (looks like the supplier from hexto's link)
Magboss.eu
Stormwing said:
Actually, upon further inspection, I'm positive there's a difference. I found a couple European sites offering Z3V parts, expressly labeled as Black or Silver. Before anyone gets too excited though, none of them have the USB covers in stock.
Display Doktor/World of Mobiles (looks like the supplier from hexto's link)
Magboss.eu
Click to expand...
Click to collapse
Seems unlikely that the port cover would be different other than in color. Try chatting with Sony. I did that when I was trying to see if they would sell me the part and they were pretty helpful. I chatted right from my phone using Chrome browser.
My port cover didn't arrive today. So annoying. I'm in CT and the package left Brooklyn, NY at 5:46am on Saturday. It should've been delivered today. Damn 3rd class mail. I feel like I've gotten straight from China packages quicker.
Sent from my D6708 using XDA Free mobile app
Yeah, I just mean the exterior color. Still want it to be the most perfect though. The white definitely has a lighter silver trim, while the black has a darker, slate grayish silver.
Black and White comparison video
My port cover arrived and after about a half hour of failed attempts I figured out how to easily install it without damaging it.
Unfortunately, the damn thing won't fit. It looks perfect but it won't stay closed. I have to press it hard so it closes but it pops right back open on it's own. Nothing like the other ports. I've contacted the seller. Hopefully they will make it right.
I did learn how to install it and will post the video tomorrow. For now, here are two pix showing the ill-fitting cover.
Waited 20 days for this crap ?
Sent from my D6708 using XDA Free mobile app